Jump to content
ErmaC

Clover General discussion

22,194 posts in this topic

Recommended Posts

@fusion71au

Nice to use combination of dd and system fdisk. I think it will be best solution.

 

11 minutes ago, nms said:

Fdisk440 or not fdisk440?

 

There is the bug in "dd" case. All boot blocks must be written to /dev/rdisk*.

Someone can correct this? We use

dd if=${bootdisk}

so there will be calculation before to define {rbootdisk}.

Share this post


Link to post
Share on other sites
Advertisement

@fusion71au can you try then this way?

### Stage 0 ###
echo "Stage 0 - Writing ${diskloader} to ${bootrdisk}" >> "$install_log"
echo dd if=${bootrdisk} count=1 bs=512 of=/tmp/origMBR >> "$install_log"
dd if=${bootrdisk} count=1 bs=512 of=/tmp/origMBR
echo cp /tmp/origMBR /tmp/newMBR >> "$install_log"
cp /tmp/origMBR /tmp/newMBR
echo dd if="${DEST_VOL}/usr/standalone/i386/${diskloader}" of=/tmp/newMBR bs=440 count=1 conv=notrunc >> "$install_log"
dd if="${DEST_VOL}/usr/standalone/i386/${diskloader}" of=/tmp/newMBR bs=440 count=1 conv=notrunc
echo fdisk -f /tmp/newMBR -u -y ${bootrdisk} >> "$install_log"
fdisk -f /tmp/newMBR -u -y ${bootrdisk}
echo "" >> "$install_log"

just to ensure all is good.

 

EDIT
tested my self, working

Edited by vector sigma

Share this post


Link to post
Share on other sites

Hi

 

Wonderful embedded theme with commit r4639 :thumbsup_anim: 

 

Can we have a usb icon on vol_clover and vol_external. Please. it would be convenient for the macOS Installer pen drive for example.

 

 

Sorry for my bad english

 

Edited by Matgen84

Share this post


Link to post
Share on other sites
22 minutes ago, Matgen84 said:

Hi

 

Wonderful embedded theme with commit r4639 :thumbsup_anim: 

 

Can we have a usb icon on vol_clover and vol_external. Please. it would be convenient for the macOS Installer pen drive for example.

 

 

Sorry for my bad english

 

Yes I have USB Installer Mojave

screenshot7.thumb.png.a51149aae46fa7a59874f12592a07fb4.png

Share this post


Link to post
Share on other sites
38 minutes ago, chris1111 said:

Yes I have USB Installer Mojave

screenshot7.thumb.png.a51149aae46fa7a59874f12592a07fb4.png

 

I don't talk about that. I have vol_external too for USB Installer but without logo on it. Like USB logo for example

vol_external.png

Share this post


Link to post
Share on other sites

Hi Clover team   :)

 

As you can see, this topic has became expansive enough (more than 700 pages, 25 posts per page) and to continue posting further would be more counterproductive, IMO.

 

Without dwelling on that (I think you've all understood that no one is so crazy about reading the 700 pages to be up to date, right?), I suggest you to open another topic (v2.0  :P ) and continue to discuss.

Share this post


Link to post
Share on other sites
12 hours ago, vector sigma said:

@fusion71au can you try then this way?

just to ensure all is good.

 

Thanks to @vector sigma and @Slice for recent commits.  Boot0 is now correctly installed in MBR for legacy Clover installation :thumbsup_anim:.

 

Yes, all is good but spelling mistake in log for stage 1 "Writting" should be "Writing" :P.  Install log for r4643...
 

Spoiler

 


Installer version: v2.4k r4643 EFI bootloader
======================================================
/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            121.0 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data WIN10                   334.7 GB   disk0s4
   5:           Windows Recovery                         472.9 MB   disk0s5
   6:           Linux Filesystem                         38.7 GB    disk0s6
   7:                 Linux Swap                         4.3 GB     disk0s7
/dev/disk1 (external, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *15.9 GB    disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Mojave_Installer        15.5 GB    disk1s2
======================================================
Backing up EFI files

Backing up stage2 file /Volumes/Mojave_Installer/EFIROOTDIR/boot  to /Volumes/Mojave_Installer/EFI-Backups/r4630/2018-08-10-09h17/boot
Backing up /Volumes/Mojave_Installer/EFIROOTDIR/EFI folder to /Volumes/Mojave_Installer/EFI-Backups/r4630/2018-08-10-09h17/EFI
No Active Partition

Stage 0 - Writing boot0af to /dev/rdisk1
dd if=/dev/rdisk1 count=1 bs=512 of=/tmp/origMBR
cp /tmp/origMBR /tmp/newMBR
dd if=/Volumes/Mojave_Installer/usr/standalone/i386/boot0af of=/tmp/newMBR bs=440 count=1 conv=notrunc
fdisk -f /tmp/newMBR -u -y /dev/rdisk1

Stage 1 - Writting boot1f32 to /dev/rdisk1s1
dd if=/dev/rdisk1s1 count=1 bs=512 of=/tmp/origbs
boot volume format is FAT32
cp /tmp/boot1f32 /tmp/newbs
dd if=/tmp/origbs of=/tmp/newbs skip=3 seek=3 bs=1 count=87 conv=notrunc
dd if=/tmp/newbs of=/dev/rdisk1s1

Stage 2 - Written boot6 (x64) to /Volumes/ESP/boot

======================================================
=========== Clover EFI Installation Finish ===========
======================================================

 

 

 

 

Clover_v2.4k_r4643.pkg.zip

Edited by fusion71au

Share this post


Link to post
Share on other sites

@fusion71au any explanation why I can boot normally with Clover UEFI on my mach (sig) only with this?

sudo newfs_msdos -F 32 -b 2048 -v EFI /dev/rdiskXsY

w/o "-b 2048" I get strange behaviour with it (CaseSensitive issue, not loaded EFI kexts, broken themes, etc).

Is this specific BIOS firmware limitation or what? TIA.

 

#EDIT: Yeah, my partition map is GUID for sure.

#EDIT2: Also tried with various ~Aptio*.efi driver, PartitionDxe, but still.. I need this for my ESP:

Allocation Block Size:    2048 Bytes

 

Edited by Badruzeus

Share this post


Link to post
Share on other sites
14 minutes ago, Badruzeus said:

@fusion71au any explanation why I can boot normally with Clover UEFI on my mach (sig) only with this?


sudo newfs_msdos -F 32 -b 2048 -v EFI /dev/rdiskXsY

w/o "-b 2048" I get strange behaviour with it (CaseSensitive issue, not loaded EFI kexts, broken themes, etc).

Is this specific BIOS firmware limitation or what? TIA.

 

#EDIT: Yeah, my partition map is GUID for sure.

#EDIT2: Also tried with various ~Aptio*.efi driver, PartitionDxe, but still.. I need this for my ESP:


Allocation Block Size:    2048 Bytes

 

 

Not sure but I'm guessing its probably something specific to your BIOS firmware. 

 

TBH, I've rarely had the need to format my EFI System partition and never specified block size, -b, when using newfs_msdos to format it - just omitted the setting and it usually works.  Apparently, 2KiB is the sector size for CD/DVD-ROMS?

Share this post


Link to post
Share on other sites
7 hours ago, Badruzeus said:

@fusion71au any explanation why I can boot normally with Clover UEFI on my mach (sig) only with this?


sudo newfs_msdos -F 32 -b 2048 -v EFI /dev/rdiskXsY

w/o "-b 2048" I get strange behaviour with it (CaseSensitive issue, not loaded EFI kexts, broken themes, etc).

Is this specific BIOS firmware limitation or what? TIA.

 

#EDIT: Yeah, my partition map is GUID for sure.

#EDIT2: Also tried with various ~Aptio*.efi driver, PartitionDxe, but still.. I need this for my ESP:


Allocation Block Size:    2048 Bytes

 

You should use Fat.efi driver because the one from firmware is not good.

Share this post


Link to post
Share on other sites
13 hours ago, fantomas1 said:

Hi Clover team   :)

 

As you can see, this topic has became expansive enough (more than 700 pages, 25 posts per page) and to continue posting further would be more counterproductive, IMO.

 

Without dwelling on that (I think you've all understood that no one is so crazy about reading the 700 pages to be up to date, right?), I suggest you to open another topic (v2.0  :P ) and continue to discuss.

This thread is like a chat for short conversation: a question and an answer that not deserves separate thread.

For long-live solution that can be interesting in history we have to create separate topics.

Share this post


Link to post
Share on other sites

Hi

 

With  latest commit r4643, a security check box appears when I launch Clover to update (install). No check box with previous version r4639. I don't understand why?  

Capture d’écran 2018-08-10 à 18.10.32.png

Edited by Matgen84

Share this post


Link to post
Share on other sites

macOS Mojave 10.14 Beta 6 (18A353d)

Xcode Version 10.0 beta 5 (10L221o)

Clover Revision

4644

UDK2018 Revision

37970

AptioMemoryFix Revision

#define APTIOMEMORYFIX_PROTOCOL_REVISION  22

ApfsDriverLoader Version

#define APFSDRIVERLOADER_VERSION L"1.3.2"

 

All good here

Spoiler

1857826844_Capturedcranle2018-08-1122_13_42.thumb.png.2362dd9b0d5d66212dc12d05a4620ad0.png

 

Share this post


Link to post
Share on other sites
6 minutes ago, chris1111 said:

macOS Mojave 10.14 Beta 6 (18A353d)

Xcode Version 10.0 beta 5 (10L221o)

Clover Revision

4644

UDK2018 Revision

37970

AptioMemoryFix Revision

#define APTIOMEMORYFIX_PROTOCOL_REVISION  22

ApfsDriverLoader Version

#define APFSDRIVERLOADER_VERSION L"1.3.2"

 

All good here

  Hide contents

1857826844_Capturedcranle2018-08-1122_13_42.thumb.png.2362dd9b0d5d66212dc12d05a4620ad0.png

 

Anyway, how to check *.efi driver version / revision using Terminal?

Share this post


Link to post
Share on other sites
23 minutes ago, Badruzeus said:

Anyway, how to check *.efi driver version / revision using Terminal?



svn info /$HOME/src/UDK2018/Clover | grep "Revision" | awk '{print $2;}'

svn info /$HOME/src/UDK2018 | grep "Revision" | awk '{print $2;}'

grep REVISION /$HOME/src/UDK2018/AptioFixPkg/Include/Protocol/AptioMemoryFixProtocol.h

grep APFSDRIVERLOADER_VERSION /$HOME/src/UDK2018/ApfsSupportPkg/Platform/ApfsDriverLoader/Version.h

 



 

Edited by chris1111

Share this post


Link to post
Share on other sites
5 minutes ago, chris1111 said:

svn info /$HOME/src/UDK2018/Clover | grep "Revision" | awk '{print $2;}'
svn info /$HOME/src/UDK2018 | grep "Revision" | awk '{print $2;}'
grep REVISION /$HOME/src/UDK2018/AptioFixPkg/Include/Protocol/AptioMemoryFixProtocol.h
grep APFSDRIVERLOADER_VERSION /$HOME/src/UDK2018/ApfsSupportPkg/Platform/ApfsDriverLoader/Version.h

I mean, from prebuilt *.efi binary driver.. but, thank you.

Edited by Badruzeus

Share this post


Link to post
Share on other sites
2 minutes ago, chris1111 said:

which efi drivers

Any pre-installed *.efi drivers:

Spoiler

0:980  0:000  === [ LoadDrivers ] =======================================
0:985  0:004  Loading ApfsDriverLoader-64.efi  status=Success
1:003  0:017   - driver needs connecting
1:003  0:000  Loading AppleImageCodec-64.efi  status=Success
1:004  0:000  Loading AppleKeyAggregator-64.efi  status=Success
1:005  0:000  Loading AppleUITheme-64.efi  status=Success
1:006  0:000  Loading AptioMemoryFix-64.efi  status=Success
1:006  0:000  Loading CsmVideoDxe-64.efi  status=Success
1:007  0:000   - driver needs connecting
1:007  0:000  Loading DataHubDxe-64.efi  status=Success
1:012  0:004  Loading FirmwareVolume-64.efi  status=Success
1:012  0:000  Loading FSInject-64.efi  status=Success
1:013  0:000  Loading HashServiceFix-64.efi  status=Success
1:014  0:000  Loading SMCHelper-64.efi  status=Success
1:015  0:000  Loading VBoxHfs-64.efi  status=Success
1:015  0:000   - driver needs connecting
1:015  0:000  3 drivers needs connecting ...
1:015  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
1:015  0:000  APFS driver loaded

 

 

Share this post


Link to post
Share on other sites
34 minutes ago, Badruzeus said:

Any pre-installed *.efi drivers:

  Reveal hidden contents


0:980  0:000  === [ LoadDrivers ] =======================================
0:985  0:004  Loading ApfsDriverLoader-64.efi  status=Success
1:003  0:017   - driver needs connecting
1:003  0:000  Loading AppleImageCodec-64.efi  status=Success
1:004  0:000  Loading AppleKeyAggregator-64.efi  status=Success
1:005  0:000  Loading AppleUITheme-64.efi  status=Success
1:006  0:000  Loading AptioMemoryFix-64.efi  status=Success
1:006  0:000  Loading CsmVideoDxe-64.efi  status=Success
1:007  0:000   - driver needs connecting
1:007  0:000  Loading DataHubDxe-64.efi  status=Success
1:012  0:004  Loading FirmwareVolume-64.efi  status=Success
1:012  0:000  Loading FSInject-64.efi  status=Success
1:013  0:000  Loading HashServiceFix-64.efi  status=Success
1:014  0:000  Loading SMCHelper-64.efi  status=Success
1:015  0:000  Loading VBoxHfs-64.efi  status=Success
1:015  0:000   - driver needs connecting
1:015  0:000  3 drivers needs connecting ...
1:015  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
1:015  0:000  APFS driver loaded

 

 

maybe look at UDK2018/Build/Cover ?

Share this post


Link to post
Share on other sites

InstallBootsectors/postinstall

the script not cleanup /tmp file

 

Spoiler

50Capture.thumb.png.90dba32915b994d41b6c926fc8786a07.png

 

not working with the scrip but terminal is ok

Strange now I rebuild new package and the file changing the name

newbs, origbs

I need terminal for removing the file

It is not really important because is remove at reboot

Spoiler

51Capture.png.adcc3691383fa765dd700e3d3ab9e4a1.png

 

Edited by chris1111
put image in spoiler and clean my post

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By STLVNUB
      Script file to clone and help build Clover, Opencore (official and unofficial) repos
      Script will create link to itself in /usr/local/bin/bob
      Wouldn't hurt to check there are no "Bob"'s there, i "Hope" there isn't.
      Then you only need to type bob. and a parameter
      "n" for NDK repo, unofficial
      "a" for ACID repo, official
      "c" for CLOVER
      It also takes "all" for ALL, if your game
       
      Easier typing bob than.....usual stuff
      Enjoy
       
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By heiza
      Ryzen 7 2700X
      ASUS Prime X470 Pro
      32GB G.Skill Ripjaws V DDR4-3200
      ASRock Phantom Gaming Vega 56
       
      My motherboard doesn’t have an option for 4G encoding. And boot modes are listed as ”Windows UEFI Mode” and “Other OS”.
       
    • By Myfz
      Hi all,

      I recently build my hackintosh, I got Win10 on my 1st disk and MacOS Catalina on the 2nd disk.
       
      Unfortunately my Win10 disk was defective and I will need to change it.
       
      I was thinking to :
       
      - Remove my Win10 disk and replace by my new one
      - Temporarily remove my MacOS Disk (Clover)
      - Reinstall Win10 on my new disk
      - Put back my MacOS Disk

      I believe clover will still start, and I will still be able to boot on the new Win10 disk, what do you think ?

      Thank in advance for your help,
      regards
    • By blackosx
      Do you want to quickly find your boot log, or ever wanted to know which version of bootloader is installed on your disk(s), had the need to dump your BIOS from OS X, just curious about your own system setup or been asked to provide your setup information to others when asking for assistance?
       
      DarwinDumper is a useful collection of readily available tools, and scripts wrapped in an application framework giving you a convenient method to quickly gather a system overview of your hack or Mac. And rest assured that enabling the privacy option will mask sensitive data like the IOPlatformSerialNumber, IOPlatformUUID, IOMACAddress(s), USB Serial Number(s), SystemSerialNumber, serial-number, fmm-mobileme-token-FMM, MLB and ROM efi vars and CustomUUID in the dumped files and report.
       
      Current Release Version: 3.0.4, though latest beta DarwinDumper_v3.1.0b6


      The system dumps are saved to a folder or your choice, but defaulting to the same directory as the main application. You can choose to setup a symlink to make it simple to run DarwinDumper from the Terminal.
       
      There is an option to create an html report showing a complete overview of the dumps. This report will mostly just contain the text dumps as you'll find in the main dump directory, but for some dumps there is extra processing to try to present the information in a better way. For example, the Disk Partitions and Unique ID's dump will show a visual map of the disk layout, and the DMI Tables (SMBIOS) dump will show the data split by table type.
       

       
      Note: The html report does not contain all files from a complete dump so if seeking assistance for a problem and you wish to send someone a DarwinDump then you will want to send the complete dump directory and not just the .html report file.
       
      The following can be read and dumped by DarwinDumper:
      - ACPI tables.
      - Audio codec and further info.
      - Boot loaders and configuration files.
      - CPU info.
      - Device-properties.
      - Disk partition structure / info.
      - Disk sectors (hex).
      - DMI (SMBIOS).
      - EDID.
      - I/O Kit Registry.
      - EFI Memory Map.
      - EFI vars (some).
      - Kernel information
      - Kexts - (list of currently loaded kexts).
      - Memory.
      - NVRAM (both Apple specific and UEFI firmware variables).
      - SMC Keys.
      - LSPCI (PCI vendor & device codes) dumps.
      - Power (Sleep/Hibernate) settings.
      - RTC.
      - System Profiler.
      - System BIOS.
      - System Log(s).
      - Video BIOS.
       
      License:
      DarwinDumper is licensed under GNU General Public License, version 3.0 (GPLv3).
       
      Tools included:
      AnalyseVBIOS
      Copyright: Not Known. License: Not known Source: http://www.insanelymac.com/forum/topic/211294-information-on-vesa-modes-in-atinvidia-bios/   AppleIntelInfo Copyright: © 2012-2017 Pike R. Alpha. All rights reserved. License: Creative Commons Attribution-NonCommercial https://github.com/Piker-Alpha/AppleIntelInfo   atomdis Copyright: Michael Larabel @ Phoronix.com License: GPL Version 2 Source: http://www.phoronix.com/scan.php?page=article&item=amd_atombios_dumper   bgrep Copyright 2009 Felix Domke <tmbinc@elitedvb.net>. All rights reserved.   Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:      1. Redistributions of source code must retain the above copyright notice, this list of       conditions and the following disclaimer.      2. Redistributions in binary form must reproduce the above copyright notice, this list       of conditions and the following disclaimer in the documentation and/or other materials       provided with the distribution.   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.   The views and conclusions contained in the software and documentation are those of the authors and should not be interpreted as representing official policies, either expressed or implied, of the copyright holder.   Source: https://github.com/tmbinc/bgrep   bdmesg Copyright 2010 by Islam M. Ahmed Zaid. All rights reserved. License: GPL Version 2 Source: http://forge.voodooprojects.org/p/chameleon/source/tree/HEAD/trunk/i386/util/bdmesg.c   cmosDumperForOsx Created by rafirafi, revised extensively by STLVNUB License: Information not available Source: http://www.projectosx.com/forum/index.php?showtopic=2432&st=0&p=21522&&do=findComment&comment=21522   csrstat Created by Piker-Alpha Copyright: © 2015-2017) by Pike R. Alpha License: Information not available Source: https://github.com/Piker-Alpha/csrstat   dmidecode http://www.nongnu.org/dmidecode/ License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2488   dumpACPI Created by blackosx. Idea taken from PHPdev32's MacIASL. Source: https://bitbucket.org/blackosx/dumpacpi   edid-decode Created by Adam Jackson, revised by Andy Vandijck License: Information not available Original Source: http://cgit.freedesktop.org/xorg/app/edid-decode Revised Source: http://bit.ly/1qAzqxb   fdisk440 Apple Computer, Inc. License: APSL v2.0 Source: http://forge.voodooprojects.org/p/chameleonApplications/source/tree/HEAD/trunk/fdisk.tproj   FirmwareMemoryMap script Amit Singh (showbootermemorymap) License: Information not available Source: http://www.projectosx.com/forum/index.php?showtopic=2447&st=120&p=19329&&do=findComment&comment=19329   flashrom http://flashrom.org/Flashrom License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2485&view=findpost&p=40285   getcodecid Copyright © 2012 AnV Software. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/285277-getcodecid-command-line-tool-to-detect-codec-id/   getdump Created by fassl?, modifications by Slice and AutumnRain? License: Information not available Source: https://svn.code.sf.net/p/voodoohda/code/tranc/getdump.c   gfxutil Copyright 2008 mcmatrix. All rights reserved. License: Information not available http://forum.netkas.org/index.php?PHPSESSID=q2isd338ihjjpcgbng7tne08pdv7tr4f&topic=64.0 Source: https://dl.dropbox.com/u/222155/gfxutil_source.zip   iasl Copyright © 2000 – 2014 Intel Corporation. License: Information not available Source: https://github.com/acpica/acpica   ioregwv Apple Computer, Inc. License: APSL v2.0 Source: https://bitbucket.org/blackosx/ioregwv   lzma Copyright © 2013 Igor Pavlov. License: GNU Lesser General Public License Source: http://www.7-zip.org/sdk.html   lzvn Copyright: © 2014 Apple Computer, Inc. All rights reserved. License: APSL Credit: Piker-Alpha, Andy Vandijck, MinusZwei. https://github.com/Piker-Alpha/LZVN   MacGap2 Created by Tim Debo. All rights reserved. License: MIT Source: https://github.com/MacGapProject/MacGap2   nvram Apple Computer, Inc. License: APSL v2.0 Source: https://bitbucket.org/blackosx/nvram   oclinfo Copyright © 2009 cmf License: GPL Version 2 Source: http://www.insanelymac.com/forum/topic/170796-opencl-info/   pciutils driver (DirectHW.kext) DirectHW is Copyright © 2008-2010 coresystems GmbH License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2480   pciutils lspci Copyright © 1997--2008 Martin Mares License: GPL Version 2 Source Code: https://kernel.googlesource.com/pub/scm/utils/pciutils/pciutils.git/+/master   Macpmem driver (Macpmem.kext) Copyright © 2007-2011 Volatile Systems. Copyright 2013-2014 Google Inc. All Rights Reserved. License: GPL Version 2 Source Code: https://github.com/google/rekall/tree/master/tools/osx/MacPmem]https://github.com/google/rekall/tree/master/tools/osx/MacPmem   RadeonDump Created by Dong Luo. Copyright 2008. All rights reserved. Modified by Andy Vandijck License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   radeon_bios_decode Created by Dong Luo. Copyright 2008. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   smbios-reader http://www.nongnu.org/dmidecode/ License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2208   SMC_util3 Copyright © 2006 devnull  License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2447&view=findpost&p=23230   VoodooHDA.kext Created by fassl?, modifications by Slice and AutumnRain? License: https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h]https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h Source: https://sourceforge.net/p/voodoohda/code/HEAD/tree/]https://sourceforge.net/p/voodoohda/code/HEAD/tree/   x86info Written to succeed CPUID by Phil Karn (KA9Q). Contributed to by various people. OS X compatability by Slice License: GPL Version 2 Original Source: https://github.com/kernelslacker/x86info Revised Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2447&view=findpost&p=41134  
       
      Running DarwinDumper from the command line:
      From Terminal, you can initiate DarwinDumper by running the following script directly.
       
       
       
      /DarwinDumper.app/Contents/Resources/public/bash/script.sh To help with this, the UI has a Symlink option which you can click to create a symbolic link which points to the above script. DarwinDumper can then be subsequently run from the command-line by loading a new Terminal window and typing darwindumper followed by return.

      Credits (in alphabetical order):
      Adam Jackson, Amit Singh, Andy Vandijck, Apple Inc., arsradu, bcc9, blackosx, cmf, DieBuche, dmazar, Dong Luo, droplets, ErmaC, Felix Domke, Google Inc., Intel Corporation, InsanelyDeepak, JrCs, Kabyl, Kynnder, Martin Mareš, mcmatrix, Michael Larabel, Mickey1979, phcoder, Phil Karn, Piker-Alpha, rafirafi, гык-sse2, Slice ,sonotone, STLVNUB, THe KiNG, Trauma, Volatile Systems, xsmile, !Xabbu.
       
      DarwinDumper was originally inspired as an open project by Trauma, it has remained an open project and please keep it an open project, so if you make any changes or additions to it then please share your work here.
       
      Please report any feedback, requests or bugs.
       
      Please note:
      DarwinDumper v3 requires OS X 10.9 and newer to run in the Finder, though it should work from the command line okay on older OS versions.

      The following link retains the download for v2.9.9.2 for older OS versions.

      DarwinDumper Download
×