Jump to content
ErmaC

Clover General discussion

20,615 posts in this topic

Recommended Posts

already. i did mistake build. here is file

can you upload systemversion.plist?

 

com.apple.boot.R/SystemVersion.plist

macOS Install Data/Locked Files/Boot Files/SystemVersion.plist

 

it will help cleanup code.

 

fusion3.zip works perfectly  :thumbsup_anim: ...

 

 

 

post-846696-0-55685000-1510608759_thumb.png

post-846696-0-02069400-1510608806_thumb.png

post-846696-0-77744200-1510608828_thumb.png

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ProductBuildVersion</key>
	<string>17B48</string>
	<key>ProductCopyright</key>
	<string>1983-2017 Apple Inc.</string>
	<key>ProductName</key>
	<string>Mac OS X</string>
	<key>ProductUserVisibleVersion</key>
	<string>10.13.1</string>
	<key>ProductVersion</key>
	<string>10.13.1</string>
</dict>
</plist>

 

 

 

Attached is com.apple.boot.R.zip with SystemVersion.plist.

 

 

 

FakeSMC? When i question about the differences between 4233 and 4297 I think it's logic that I don't alter and change anything in EFI... Will test and report your idea about entries. Thanks

 

I think you might be misunderstanding me.  We need a full boot.log from Clover r4297 to diagnose the problem, which means you temporarily install essential kexts needed for booting into /S/L/E (like FakeSMC), so the boot can go to completion.

 

At the moment, your preboot.log from r4297 ends shortly after reaching the Clover GUI (because you are booting into Linux with r4297, instead of High Sierra??)...

2:534  0:058  GUI ready
7:271  4:736  BootVariable of the entry is empty
7:271  0:000  === [ StartLoader ] =======================================
7:271  0:000  Finally: ExternalClock=25MHz BusSpeed=100000kHz CPUFreq=3400MHz PIS: hw.busfrequency=100000000Hz
7:271  0:000  Loading grubx64.efi  status=Success

and is missing the crucial part we are interested in wrt kext injection eg

 

 

 

does GetOSversion detect 10.13.x correctly?

10:834  0:000  Loading boot.efi  status=Success
10:845  0:010  GetOSVersion: 10.13.1 (17B48)

and what happens with kext injection

FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 58D6B298
10:939  0:005  Use origin smbios table type 1 guid.
10:942  0:002  Preparing kexts injection for arch=x86_64 from EFI\\CLOVER\\kexts\\Other
10:942  0:000  Extra kext: EFI\\CLOVER\\kexts\\Other\\X99_Injector USB 3.kext
10:947  0:005  Extra kext: EFI\\CLOVER\\kexts\\Other\\VoodooTSCSync.kext
10:956  0:008  Extra kext: EFI\\CLOVER\\kexts\\Other\\USBInjectAll.kext
11:030  0:074  Extra kext: EFI\\CLOVER\\kexts\\Other\\Lilu.kext
11:041  0:010  Extra kext: EFI\\CLOVER\\kexts\\Other\\IntelMausiEthernet.kext
11:053  0:011  Extra kext: EFI\\CLOVER\\kexts\\Other\\FakeSMC.kext
11:067  0:013    |-- PlugIn kext: EFI\\CLOVER\\kexts\\Other\\FakeSMC.kext\\Contents\\PlugIns\\LPCSensors.kext
11:112  0:045    |-- PlugIn kext: EFI\\CLOVER\\kexts\\Other\\FakeSMC.kext\\Contents\\PlugIns\\GPUSensors.kext
11:126  0:013    |-- PlugIn kext: EFI\\CLOVER\\kexts\\Other\\FakeSMC.kext\\Contents\\PlugIns\\CPUSensors.kext
11:136  0:010  Extra kext: EFI\\CLOVER\\kexts\\Other\\Shiki.kext\
11:147  0:010  Extra kext: EFI\\CLOVER\\kexts\\Other\\AtherosE2200Ethernet.kext
11:157  0:010  Extra kext: EFI\\CLOVER\\kexts\\Other\\AppleALC.kext
11:173  0:016    |-- PlugIn kext: EFI\\CLOVER\\kexts\\Other\\AppleALC.kext\\Contents\\PlugIns\\PinConfigs.kext 

 

 

 

We can extrapolate whether kext injection is working from /CLOVER/kexts/Other by seeing if the other, non essential kexts (besides FakeSMC, like your AppleALC.kext), are loaded after a successful boot into your system with Clover r4297 and FakeSMC in /S/L/E.

com.apple.boot.R.zip

macOS Install Data.zip

Share this post


Link to post
Share on other sites
Advertisement

fusion3.zip works perfectly :thumbsup_anim: ...

 

 

 

 

attachicon.gifscreenshot0.png

attachicon.gifscreenshot1.png

attachicon.gifscreenshot2.png

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ProductBuildVersion</key>
	<string>17B48</string>
	<key>ProductCopyright</key>
	<string>1983-2017 Apple Inc.</string>
	<key>ProductName</key>
	<string>Mac OS X</string>
	<key>ProductUserVisibleVersion</key>
	<string>10.13.1</string>
	<key>ProductVersion</key>
	<string>10.13.1</string>
</dict>
</plist>
 

 

 

Attached is com.apple.boot.R.zip with SystemVersion.plist.

Thank you for detail test and report.

I will cleanup and commit.

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

Thanks Sherlocks.

 

It now correctly detects /com.apple.boot.R/boot.efi from "Boot OS X" as macOS install  :).  

 

At the moment, it is not parsing /com.apple.boot.R/SystemVersion.plist so os ver is not set to 10.13.x ---> will need FakeSMC in /CLOVER/kexts/Other as /10.13 won't be used...

 

 

 

1.temp test to check read other folder.zip file

-i temporarily disabled systemversion check for fusion drive to check to read other folder if os is null

 

2.rc test

-completely done

 

please test on each files, then report. thanks in advance.

temp test to check read other folder if null os.zip

rc test.zip

Share this post


Link to post
Share on other sites

ebe10439cfad046cc91f1498210740d7.jpg

 

Today when I try to delete all the UEFI variables the shell show this.

 

Does this protected variables cause our laptop can’t use native nvram?

 

 

从我的 iPhone 发送,使用 Tapatalk

Share this post


Link to post
Share on other sites

ebe10439cfad046cc91f1498210740d7.jpg

 

Today when I try to delete all the UEFI variables the shell show this.

 

Does this protected variables cause our laptop can’t use native nvram?

 

 

从我的 iPhone 发送,使用 Tapatalk

Maybe.. It was protected. I don't know exactly.

http://www.insanelymac.com/forum/index.php?/topic/304530-Clover-Change-Explanations&do=findComment&comment=2533580

 

Follow terminal command and check nvram -p after reboot.

 

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

Maybe.. It was protected. I don't know exactly.

http://www.insanelymac.com/forum/index.php?/topic/304530-Clover-Change-Explanations&do=findComment&comment=2533580

 

Follow terminal command and check nvram -p after reboot.

 

 

나의 LG-F800S 의 Tapatalk에서 보냄

still no native nvram support now

 

 

从我的 iPhone 发送,使用 Tapatalk

Share this post


Link to post
Share on other sites

still no native nvram support now

 

 

从我的 iPhone 发送,使用 Tapatalk

You have to use emulvariable+rc script if you want to use nvram feature on your system. save brightness value/etc

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

You have to use rc script if you want to use nvram feature on your system. save brightness value/etc

 

나의 LG-F800S 의 Tapatalk에서 보냄

I just want to find some solutions to solve the native nvram support on our laptop.

 

 

从我的 iPhone 发送,使用 Tapatalk

Share this post


Link to post
Share on other sites

1.temp test to check read other folder.zip file

-i temporarily disabled systemversion check for fusion drive to check to read other folder if os is null

 

2.rc test

-completely done

 

please test on each files, then report. thanks in advance.

 

i tested it on 10.13.2 beta3 if os null

post-980913-0-68231900-1510654664_thumb.png

post-980913-0-88598100-1510654665_thumb.png

 

@fusion71au

please test rc test.file.

http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?p=2534374

 

thanks

Share this post


Link to post
Share on other sites

1.temp test to check read other folder.zip file

-i temporarily disabled systemversion check for fusion drive to check to read other folder if os is null

 

2.rc test

-completely done

 

please test on each files, then report. thanks in advance.

 

For temp test version, GetOSVersion incorrectly finds 10.12 and Clover injects kexts from /Other and /10.12...

 

 

78:972  0:000  Loading boot.efi  status=Success
79:074  0:102  GetOSVersion: 10.12

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE725918
79:362  0:000  ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !
79:362  0:000  Use origin smbios table type 1 guid.
79:363  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\XPS M1530 \kexts\Other
79:363  0:000  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\RTL8192SUs.kext
79:398  0:034  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext
79:400  0:002    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
79:404  0:003    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
79:405  0:001    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
79:407  0:001  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext
79:417  0:010    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\VoodooBatterySMC.kext
79:421  0:004    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\PC8739x.kext
79:424  0:002    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\IntelCPUMonitor.kext
79:427  0:003    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\GeforceSensor.kext
79:430  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\XPS M1530 \kexts\10.12
79:430  0:000  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\10.12\NullEthernet.kext

 

 

Block injected kexts menu only shows /Other folder...

post-846696-0-00789800-1510653863_thumb.png

 

 

 

For rc test version, GetOSVersion correctly finds 10.13 and Clover injects kexts from /Other and /10.13...

 

 

65:372  0:000  Loading boot.efi  status=Success
65:475  0:103  GetOSVersion: 10.13.1

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE72E718
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE72E718
65:762  0:000  ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !
65:762  0:000  Use origin smbios table type 1 guid.
65:763  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\XPS M1530 \kexts\Other
65:763  0:000  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\RTL8192SUs.kext
65:797  0:034  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext
65:799  0:002    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
65:803  0:003    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
65:805  0:001    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
65:806  0:001  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext
65:816  0:010    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\VoodooBatterySMC.kext
65:820  0:004    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\PC8739x.kext
65:823  0:002    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\IntelCPUMonitor.kext
65:826  0:003    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\GeforceSensor.kext
65:829  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\XPS M1530 \kexts\10.13
65:829  0:000  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\10.13\NullEthernet.kext

 

 

Block injected kexts menu shows /Other and /10.13 folders...

 

post-846696-0-36182900-1510654167_thumb.png

post-846696-0-10024700-1510654190_thumb.png

post-846696-0-59229200-1510654220_thumb.png

post-846696-0-86896900-1510654295_thumb.png

 

 

Thanks Sherlocks.

I think your rc version is ready to go  :).

Share this post


Link to post
Share on other sites

For temp test version, GetOSVersion incorrectly finds 10.12 and Clover injects kexts from /Other and /10.12...

 

 

78:972  0:000  Loading boot.efi  status=Success
79:074  0:102  GetOSVersion: 10.12

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE725918
79:362  0:000  ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !
79:362  0:000  Use origin smbios table type 1 guid.
79:363  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\XPS M1530 \kexts\Other
79:363  0:000  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\RTL8192SUs.kext
79:398  0:034  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext
79:400  0:002    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
79:404  0:003    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
79:405  0:001    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
79:407  0:001  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext
79:417  0:010    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\VoodooBatterySMC.kext
79:421  0:004    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\PC8739x.kext
79:424  0:002    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\IntelCPUMonitor.kext
79:427  0:003    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\GeforceSensor.kext
79:430  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\XPS M1530 \kexts\10.12
79:430  0:000  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\10.12\NullEthernet.kext

 

 

Block injected kexts menu only shows /Other folder...

 

 

 

For rc test version, GetOSVersion correctly finds 10.13 and Clover injects kexts from /Other and /10.13...

 

 

65:372  0:000  Loading boot.efi  status=Success
65:475  0:103  GetOSVersion: 10.13.1

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE72E718
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE72E718
65:762  0:000  ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !
65:762  0:000  Use origin smbios table type 1 guid.
65:763  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\XPS M1530 \kexts\Other
65:763  0:000  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\RTL8192SUs.kext
65:797  0:034  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext
65:799  0:002    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
65:803  0:003    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
65:805  0:001    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
65:806  0:001  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext
65:816  0:010    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\VoodooBatterySMC.kext
65:820  0:004    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\PC8739x.kext
65:823  0:002    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\IntelCPUMonitor.kext
65:826  0:003    |-- PlugIn kext: EFI\CLOVER\OEM\XPS M1530 \kexts\Other\FakeSMC.kext\Contents\PlugIns\GeforceSensor.kext
65:829  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\XPS M1530 \kexts\10.13
65:829  0:000  Extra kext: EFI\CLOVER\OEM\XPS M1530 \kexts\10.13\NullEthernet.kext

 

 

Block injected kexts menu shows /Other and /10.13 folders...

 

 

Thanks Sherlocks.

I think your rc version is ready to go  :).

committed.

test all again. fusion drive.

thanks in advance.

Share this post


Link to post
Share on other sites

Please try this AptioFix2, without EmuVariable.

910cd2bbb1699595b1afa2c0016a4db8.jpg

 

Stuck here and reboot instantly...

 

 

 

从我的 iPhone 发送,使用 Tapatalk

Share this post


Link to post
Share on other sites

AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

So, so, so, so, so many build errors.


Stuck here and reboot instantly...


从我的 iPhone 发送,使用 Tapatalk

 

You have ACPI error loading table?? So ACPI sensors looks like it fails. What's up with that table? Looks like you didn't drop a table but reinjected it.

 

EDIT: Actually, it appears that namespace is declared in another table already and you are redeclaring it in that table...


Anyone else with EmuVariable problem please try that AptioFix? I think gujiangjiang may also have another issue.

 

EDIT: Anyone can try it. It (hopefully) should still work for working nvram.

EDIT2: I need reports people!

Share this post


Link to post
Share on other sites

AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

So, so, so, so, so many build errors.

 

 

You have ACPI error loading table?? So ACPI sensors looks like it fails. What's up with that table? Looks like you didn't drop a table but reinjected it.

 

EDIT: Actually, it appears that namespace is declared in another table already and you are redeclaring it in that table...

 

Anyone else with EmuVariable problem please try that AptioFix? I think gujiangjiang may also have another issue.

My dsdt have no error with hotpatch ssdts.

 

I have try to delete acpisensors.kext but have no use.

 

I only drop dmar in my dropping table Id

 

 

从我的 iPhone 发送,使用 Tapatalk

Share this post


Link to post
Share on other sites

My dsdt have no error with hotpatch ssdts.

 

I have try to delete acpisensors.kext but have no use.

 

I only drop dmar in my dropping table Id

 

 

从我的 iPhone 发送,使用 Tapatalk

 

Looks like you do have an error. Maybe it wasn't known cause you did not have correctly working system. You have add IMEI fix set? Maybe disable it.

 

EDIT: You may also need to set some nvram variables, that are set by nvram.plist in EFI shell before booting.

Share this post


Link to post
Share on other sites

do you have fixheaders / fixheader20000000 patch maybe you need it.

I don’t need fix header or drop bgrt.

 

 

从我的 iPhone 发送,使用 Tapatalk

Looks like you do have an error. Maybe it wasn't known cause you did not have correctly working system. You have add IMEI fix set? Maybe disable it.

 

EDIT: You may also need to set some nvram variables, that are set by nvram.plist in EFI shell before booting.

Yes I have add SSDT-IMEI.aml to fix Imei because imei could cause many problem in video playback.

 

 

从我的 iPhone 发送,使用 Tapatalk

Share this post


Link to post
Share on other sites

I don’t need fix header or drop bgrt.

 

 

从我的 iPhone 发送,使用 Tapatalk

 

Yes I have add SSDT-IMEI.aml to fix Imei because imei could cause many problem in video playback.

 

 

从我的 iPhone 发送,使用 Tapatalk

 

You are redefining it, it's already defined. You need to edit your original tables and remove or fix it, or make sure you don't have add IMEI dsdt fix enabled. Don't reinject that table without removing the previous definition.

 

EDIT: Also, reconcile your nvram since all the stuff from nvram.plist needs added back.

Share this post


Link to post
Share on other sites

You are redefining it, it's already defined. You need to edit your original tables and remove or fix it, or make sure you don't have add IMEI dsdt fix enabled. Don't reinject that table without removing the previous definition.

 

EDIT: Also, reconcile your nvram since all the stuff from nvram.plist needs added back.

When I use official osxaptiov2 have no problem.

 

I will test more and give some feedback.

 

 

从我的 iPhone 发送,使用 Tapatalk

Share this post


Link to post
Share on other sites

When I use official osxaptiov2 have no problem.

 

I will test more and give some feedback.

 

 

从我的 iPhone 发送,使用 Tapatalk

 

Yes, I am aware but the fixes have bugs, three of which I am aware, maybe more. I'm trying to fix them. I modified to prevent from moving runtime code areas, where SMM would be located, SMM uses physical mode so cannot be moved because the moving means that you have to adjust the physical addresses which can't be done, only virtual mode addresses can be changed.

Share this post


Link to post
Share on other sites

I test again with drop SSDT-IMEI but no use.

 

Try to remove IMEI Dsdt parched from heci but still can’t boot into OS X and always reboot.

 

 

 

从我的 iPhone 发送,使用 Tapatalk

Now I test add fix headers and drop bgrt but still reboot.

 

 

从我的 iPhone 发送,使用 Tapatalk

Share this post


Link to post
Share on other sites

I test again with drop SSDT-IMEI but no use.

 

Try to remove IMEI Dsdt parched from heci but still can’t boot into OS X and always reboot.

 

 

 

从我的 iPhone 发送,使用 Tapatalk

 

I don't know what you mean. Are you injecting that table? Are you using the dsdt fix mask from clover? Did you edit your original table where IMEI is? Did you restore the values from your nvram.plist into your actual nvram? It may be easier for you to run the installer again to get proper nvram. See if you can launch the installer.

Share this post


Link to post
Share on other sites

I replaced with official osxaptiofixdrv2 with no emu driver and can run into the OS X.

 

 

从我的 iPhone 发送,使用 Tapatalk

I don't know what you mean. Are you injecting that table? Are you using the dsdt fix mask from clover? Did you edit your original table where IMEI is? Did you restore the values from your nvram.plist into your actual nvram? It may be easier for you to run the installer again to get proper nvram. See if you can launch the installer.

1. I don’t inject that table and I delete the dsdt patch (heci to Imei) and delete dsdt-imei.aml but still.

 

2. I didn’t need restore full nvram to native native because when I use official osxfix2 it works well.

 

3. Both system ,recoveryhd and installer can’t boot anymore.

 

 

从我的 iPhone 发送,使用 Tapatalk

Share this post


Link to post
Share on other sites

I replaced with official osxaptiofixdrv2 with no emu driver and can run into the OS X.

 

 

从我的 iPhone 发送,使用 Tapatalk

 

Dude, I get that. There's a huge difference if you have working runtime that was not before. Do you still get message about it failing to load table because IMEI was already defined?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By digivish
      Hi All - quick thing - I have a NUC 8i7BEH with 32GB RAM and 2 x 1TB SSD drives. Each drive has its own OS - Windows 10 and Catalina 10.15.
       
      Clover works well - Catalina Boots, so does Windows.
      Catalina - has sound over HDMI (to my monitor's speakers)
      Windows - no audio device found - It does show Realtek and Intel Display Drivers - but the speaker has a red"x" and in Devices, there is no entry for Microphone Array under Audio Input/Output. It does, however, show Intel display over the HDMI - but actually no sound.
       
      I have tried reinstalling Realtek drivers - now here's the thing...when it installs, it first uninstalls existing Realtek drivers - at this stage (and it's important) the sound starts working - as if uninstalling did the trick. As part of the installing, I have to reboot and upon reboot, it actually reinstalls the Realtek drivers. After that, I'm back to square 1. Unsure if it's the config.plist or boot args in clover. But something with Clover for sure.
       
      I have tested this by removing the Mac Drive with clover and just booting directly to Windows 10 bootloader and everything works as it should, I have sound over HDMI and the audio device shows. Just not when I boot with Clover.
       
      has anyone experienced this and have thoughts or pointers.
       
      Thanks a ton!
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/viewtopic.php?f=28&amp;t=10578
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By kylon
      ACPI and Clover config for Acer Aspire v5-571PG
       
      Tested on Catalina 10.15.1 and Clover EFI 5098 (Should work on MacOS 10.9.x - 10.15.x)
       
      Not Working:
      - sd card reader
      - Atheros AR9462 (use a compatible USB wireless adapter, see below)
      - Touchscreen (MacOS 10.15 only)
       
       
      Notes:
      Disable Secure Boot and enable Legacy Boot. Legacy Mode is recommended.  
      **To reset your BIOS, power on the pc and hold the power button for about 30-40 seconds or you can short G2101 (RAM SLOT 1)**
       
       
      About the Atheros card:
      You can install ATH9KFixup (you will also need additional patches on 10.14+ to restore Atheros support) to enable this card, however,
      it will break sleep on MacOS 10.14+, it can freeze your OS at any time and it can freeze your network settings.
      Because of its instability it is highly recommended to buy a USB wireless adapter.
       
      You can find a list of working adapters, and the drivers, here.
       
       
      Additional things you will need:
      Latest Clover config (AcerAspireV5-571pg - CCE Bank) from here CloverEFI (download) or OpenCore (download - Untested) WhateverGreen (download) VoodooPS2 (download) VirtualSMC + SMCBatteryManager (download) AppleALC (download) Lilu (download) Mieze Realtek RTL8111 (download)  
      CloverEFI drivers you will need:
      ApfsDriverLoader EmuVariableUefi FSInject DataHubDxe VBoxHfs (if you have hfs partitions)  
      Remember to install BIOS drivers if you enable Legaby Boot.
       
       
       
      Feel free to ask for help.
      Please send me a PM if you have fixes or improvements, thanks.
    • By oldman20
      Hi all, i just want to know how can use mouse & keyboard USB with USB port when Cloverbootloader startup? I installed Ps2MouseDxe.efi and UsbMouseDxe.efi but not work, while touchpad and keyboard integrated laptop working!!
      thanks all!
      and 2nd question is: i installed success Catalina with APFS format, in Disk Utility show 2 partition is Catalina SSD and Catalina Data?? what is it?

      more and last, sorry cause it's short question: which most right, in 2 ways create USB installer Catalina,
      sorry my bad english!

      sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled && echo Catalina Boot Drive Created

      sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ macOS\ Catalina.app --nointeraction

      thanks and regards    
    • By kushwavez
      Acer Aspire V15 V5-591G - Catalina 10.15.1
      Original link:
      https://osxlatitude.com/forums/topic/11355-acer-aspire-v-15-v5-591g-catalina-windows-10/
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      - Motherboard: USOPP_SLS (Skylake-H PCH)
      - BIOS: Insyde Corp. v 1.15
      - CPU: Intel Core i5-6300HQ 2.3 GHz (Skylake)
      - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
      - RAM: SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
      - WiFi + Bluetooth: Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
      - Audio: Realtek HD Audio: ALC 255 
      - Ethernet: Realtek RTL8168/8111
      - Card Reader: Realtek USB 2.0 Card Reader (USB2.0-CRW)
      - Webcam: HD Webcam
      - HDD: TOSHIBA MQ01ACF032 320 GB HDD
      - SSD: SPCC M.2 230 GB SSD
      - Display: 1366x768 (15.6", Matte)
      - Battery: 6 cell 56Wh / 5040mAh
      - Connectors: 
      1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad: Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
      Working:  
      - Wi-Fi (with BCM94352Z)
      - Bluetooth hand-off (With BCM94352Z)
      - Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
      - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color)
      - HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
      - Audio (ALC 255): (Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
      - Ethernet Realtek 8168/8111: RealtekRTL8111.kext
      - App Store, Messages, FaceTime, Siri, iCloud (native)
      - Integrated webcam (native)
      - 3.0 USB (native)
      - Touchpad and Keyboard (ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
      - Battery info: Install ACPIBatteryManager.kext with Kext Utility or other installer.
      - Sleep Mode
      - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable")
      Not working:
      - Original Wi-Fi (Qualcomm Atheros QCNFA344A):  unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
      - NVIDIA GeForce GTX 950M: Optimus not supported.
      - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda  (Realtek Semiconductor Corp.)"
      For Wi-Fi:
      - 1st method: You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
      - 2nd and I think the best method: Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
       
      Issues:
      - None
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode: UEFI
      Getting ready for Installation:
      - Download the Catalina install zip (bootpack & postinstall): acer_aspire_V591G-55TU_cata.zip
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze
       
      Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
      On Catalina the System folder is read-only, so you need to remount in rw to modify System/Library. 
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>  
      PowerManagement  fix:
      Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13):

      <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
       

      Elan SmartTouchpad
      I only use scrolling, one-, double- & tripletap
      If you want to try other gestures go to this link for more informations, options (v4.6.5) ->  DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
      Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
       
       
      Before updating to a new version of Catalina please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
       
      Catalina & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive), UEFI Only:
      If you already have Windows and you don't want to lose all your data there is a hope:
      I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
      You need bootable Mac Installer and a full system restore image (link is in my video's description).
      (You may see errors if your EFI partition is not 200 MB)
       Boot into your Windows, resize your partition or create one for Mac.  Boot into your Mac installer and in Disk Utility format the partition you created.  Restore from image: select your full system restore image.  When it's finished restoring you just need to restart, then boot to the system with your usb.  When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart.  Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       7.  You're done! You can select your old Windows and your new macOS!
      (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      - Make sure you have partitions in GPT
      - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
       
      IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      - It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
      - You also could "mount" the EFI from Windows:
      1st method: open cmd in administrator mode and type:
      diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition) Open Explorer++ or TotalCommander in administrator mode to manage EFI remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI) Open Explorer++ or TotalCommander in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI) Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
      Notes:
      2019.11.03: Enabled SIP caused a lots of issues so now it's disabled -> updated bootpack
      2019.11.02: Updated to 10.15.1 -> no problem when/after installing
      2019.10.09: Installed macOS Catalina 10.15 -> Updated Clover, kexts & config.plist -> no problem so far
      2019.08.18: Updated to 10.14.6 -> no problem when/after installing
      2019.06.01: Updated to 10.14.5 -> no problem when/after installing
      2019.04.25: Optimized touchpad scrolling -> updated install files
      2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
      2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
      2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 
      2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments.
      2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip" -> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
      2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
      2018.12.09: Updated to 10.14.2 -> did without any complication
      2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
      2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14.
      2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
×