Jump to content
ErmaC

Clover General discussion

18,202 posts in this topic

Recommended Posts

Test, please, rev 4289. Looks good.

Could confirm, that rev. 4289 is working for me. See "bdmesg"-BootLog:

 

 

0:100 0:100 MemLog inited, TSC freq: 4008557620

0:100 0:000 CPU was calibrated without ACPI PM Timer: ACPI I/O space is not enabled., use RTC

0:100 0:000

0:100 0:000 Now is 2.11.2017, 18:43:5 (GMT)

0:100 0:000 Starting Clover revision: 4289 on American Megatrends EFI

0:100 0:000 Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 9 | OS: 10.13.2 | XCODE: 9.1]

0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(1,GPT,720D6289-EA74-409B-A02B-A652E4BB09C0,0x28,0x64000) @8CFD4958

0:100 0:000 SelfDirPath = \EFI\BOOT

0:101 0:001 === [ Get Smbios ] ========================================

0:101 0:000 Type 16 Index = 0

0:101 0:000 Total Memory Slots Count = 4

0:101 0:000 Type 17 Index = 0

0:101 0:000 SmbiosTable.Type17->Speed = 3200MHz

0:101 0:000 SmbiosTable.Type17->Size = 8192MB

0:101 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0

0:101 0:000 SmbiosTable.Type17->Vendor = 029E

0:101 0:000 SmbiosTable.Type17->SerialNumber = 00000000

0:101 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C16

0:101 0:000 Type 17 Index = 1

0:101 0:000 SmbiosTable.Type17->Speed = 3200MHz

0:101 0:000 SmbiosTable.Type17->Size = 8192MB

0:101 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1

0:101 0:000 SmbiosTable.Type17->Vendor = 029E

0:101 0:000 SmbiosTable.Type17->SerialNumber = 00000000

0:101 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C16

0:101 0:000 Type 17 Index = 2

0:101 0:000 SmbiosTable.Type17->Speed = 3200MHz

0:101 0:000 SmbiosTable.Type17->Size = 8192MB

0:101 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0

0:101 0:000 SmbiosTable.Type17->Vendor = 029E

0:101 0:000 SmbiosTable.Type17->SerialNumber = 00000000

0:101 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C16

0:101 0:000 Type 17 Index = 3

0:101 0:000 SmbiosTable.Type17->Speed = 3200MHz

0:101 0:000 SmbiosTable.Type17->Size = 8192MB

0:101 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1

0:101 0:000 SmbiosTable.Type17->Vendor = 029E

0:101 0:000 SmbiosTable.Type17->SerialNumber = 00000000

0:101 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C16

0:101 0:000 Boot status=0

0:101 0:000 Running on: 'To Be Filled By O.E.M.' with board 'Z270 SuperCarrier'

0:101 0:000 === [ GetCPUProperties ] ==================================

0:101 0:000 CPU Vendor = 756E6547 Model=506E3

0:101 0:000 The CPU supported SSE4.1

0:101 0:000 BrandString = Intel® Core i7-6700K CPU @ 4.00GHz

0:101 0:000 The CPU supported turbo

0:101 0:000 MSR 0x35 40008

0:101 0:000 TSC/CCC Information Leaf:

0:101 0:000 numerator : 334

0:101 0:000 denominator : 2

0:101 0:000 Calibrated ARTFrequency: 24003339

0:101 0:000 MSR 0xE2 before patch 1E000002

0:101 0:000 MSR 0xCE 00080838_F1012800

0:101 0:000 MSR 0x1A0 00850089

0:101 0:000 corrected FLEX_RATIO = E0000

0:101 0:000 MSR 0x1B0 00000000

0:101 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz

0:101 0:000 MaxDiv/MinDiv: 40.0/8

0:101 0:000 Turbo: 42/42/42/42

0:101 0:000 Features: 0xBFEBFBFF

0:101 0:000 Threads: 8

0:101 0:000 Cores: 4

0:101 0:000 FSB: 100 MHz

0:101 0:000 CPU: 4000 MHz

0:101 0:000 TSC: 4000 MHz

0:101 0:000 PIS: 100 MHz

0:101 0:000 ExternalClock: 25 MHz

0:101 0:000 === [ GetDevices ] ========================================

0:101 0:000 PCI (00|00:00.00) : 8086 191F class=060000

0:101 0:000 PCI (00|00:01.00) : 8086 1901 class=060400

0:101 0:000 PCI (00|01:00.00) : 10B5 8747 class=060400

0:101 0:000 PCI (00|02:08.00) : 10B5 8747 class=060400

0:101 0:000 PCI (00|03:00.00) : 1002 67DF class=030000

0:101 0:000 - GFX: Model=AMD Radeon RX480 (ATI/AMD)

0:101 0:000 PCI (00|03:00.01) : 1002 AAF0 class=040300

0:101 0:000 - HDMI Audio:

0:101 0:000 PCI (00|02:10.00) : 10B5 8747 class=060400

0:101 0:000 PCI (00|00:14.00) : 8086 A2AF class=0C0330

0:101 0:000 PCI (00|00:14.02) : 8086 A2B1 class=118000

0:101 0:000 PCI (00|00:16.00) : 8086 A2BA class=078000

0:101 0:000 PCI (00|00:17.00) : 8086 A282 class=010601

0:101 0:000 PCI (00|00:1B.00) : 8086 A2E7 class=060400

0:101 0:000 PCI (00|05:00.00) : 144D A804 class=010802

0:101 0:000 PCI (00|00:1C.00) : 8086 A290 class=060400

0:101 0:000 PCI (00|06:00.00) : 8086 15D3 class=060400

0:101 0:000 PCI (00|07:00.00) : 8086 15D3 class=060400

0:101 0:000 PCI (00|08:00.00) : 8086 15D2 class=088000

0:101 0:000 PCI (00|07:01.00) : 8086 15D3 class=060400

0:101 0:000 PCI (00|09:00.00) : 8086 15D3 class=060400

0:102 0:000 PCI (00|0A:00.00) : 8086 15D3 class=060400

0:102 0:000 PCI (00|0B:00.00) : 8086 1533 class=020000

0:102 0:000 - LAN: 0 Vendor=Intel

0:102 0:000 PCI (00|0A:01.00) : 8086 15D3 class=060400

0:102 0:000 PCI (00|0C:00.00) : 1B73 1100 class=0C0330

0:102 0:000 PCI (00|0A:02.00) : 8086 15D3 class=060400

0:102 0:000 PCI (00|0D:00.00) : 1B21 0612 class=010601

0:102 0:000 PCI (00|0A:04.00) : 8086 15D3 class=060400

0:102 0:000 PCI (00|07:02.00) : 8086 15D3 class=060400

0:102 0:000 PCI (00|3C:00.00) : 8086 15D4 class=0C0330

0:102 0:000 PCI (00|07:04.00) : 8086 15D3 class=060400

0:102 0:000 PCI (00|00:1C.05) : 8086 A295 class=060400

0:102 0:000 PCI (00|71:00.00) : 1B21 1184 class=060400

0:102 0:000 PCI (00|72:01.00) : 1B21 1184 class=060400

0:102 0:000 PCI (00|73:00.00) : 8086 08B3 class=028000

0:102 0:000 - WIFI: Vendor=Intel

0:102 0:000 PCI (00|72:03.00) : 1B21 1184 class=060400

0:102 0:000 PCI (00|74:00.00) : 8086 1539 class=020000

0:102 0:000 - LAN: 1 Vendor=Intel

0:102 0:000 PCI (00|00:1C.07) : 8086 A297 class=060400

0:102 0:000 PCI (00|75:00.00) : DD01 0003 class=048000

0:102 0:000 PCI (00|00:1D.00) : 8086 A298 class=060400

0:102 0:000 PCI (00|76:00.00) : 144D A802 class=010802

0:102 0:000 PCI (00|00:1F.00) : 8086 A2C5 class=060100

0:102 0:000 PCI (00|00:1F.02) : 8086 A2A1 class=058000

0:102 0:000 PCI (00|00:1F.04) : 8086 A2A3 class=0C0500

0:102 0:000 PCI (00|00:1F.06) : 8086 15B8 class=020000

0:102 0:000 - LAN: 2 Vendor=Intel

0:102 0:000 === [ GetDefaultSettings ] ================================

0:102 0:000 Clover load options size = 0 bytes

0:105 0:002 EFI\CLOVER\config.plist loaded: Success

0:105 0:000 ---dump hibernations data---

0:111 0:006 Firmware wake address=00000000

0:111 0:000 Firmware wake 64 addr= 0

0:111 0:000 Hardware signature =03E6CC67

0:111 0:000 GlobalLock =00000000

0:111 0:000 Flags =00000000

0:111 0:000 === [ GetListOfThemes ] ===================================

0:111 0:000 - [00]: Classic Mac OS

0:112 0:000 - [01]: random

0:113 0:000 - [01]: embedded

0:113 0:000 === [ Found config plists ] ===============================

0:113 0:000 - config.plist

0:114 0:000 === [ GetEarlyUserSettings ] ==============================

0:114 0:000 timeout set to 10

0:114 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)

0:114 0:000 KextsToPatch: 5 requested

0:114 0:000 - [00]: AMD9500Controller (ORINOCO FB patch) :: BinPatch :: data len: 120

0:114 0:000 - [01]: AMD9500Controller (Connectors Patch for Framebuffer ACRE for RX460 NITRO) :: BinPatch :: data len: 72

0:114 0:000 - [02]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: data len: 11

0:114 0:000 - [03]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: data len: 11

0:114 0:000 - [04]: AppleUSBXHCIPCI (Change 15 port limit to 24 in XHCI kext 10.13 PB1) :: BinPatch :: data len: 4

0:114 0:000 - patch disabled at config

0:114 0:000 Default theme: Beauty

0:114 0:000 === [ LoadDrivers ] =======================================

0:114 0:000 Loading HFSPlus-64.efi status=Success

0:116 0:001 - driver needs connecting

0:116 0:000 Loading OsxFatBinaryDrv-64.efi status=Success

0:117 0:001 Loading AppleImageCodec-64.efi status=Success

0:118 0:001 Loading AppleUITheme-64.efi status=Success

0:119 0:001 Loading DataHubDxe-64.efi status=Success

0:121 0:001 Loading AppleKeyAggregator-64.efi status=Success

0:123 0:001 Loading apfs.efi status=Success

0:125 0:002 - driver needs connecting

0:125 0:000 Loading FSInject-64.efi status=Success

0:127 0:001 Loading FirmwareVolume-64.efi status=Success

0:128 0:001 Loading SMCHelper-64.efi status=Success

0:129 0:001 Loading OsxAptioFixDrv-64.efi status=Success

0:131 0:001 Loading Test2-2016.efi status=Success

0:132 0:001 2 drivers needs connecting ...

0:132 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success

0:132 0:000 HFS+ driver loaded

0:132 0:000 APFS driver loaded

0:132 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok

3:815 3:682 === [ InitScreen ] ========================================

3:815 0:000 SetMaxResolution: found best mode 0: 3840x2160

3:815 0:000 - already set

3:815 0:000 Console modes reported: 4, available modes:

3:815 0:000 - [01]: 80x25 (current mode)

3:815 0:000 - [02]: 128x40

3:815 0:000 - [03]: 100x31

3:815 0:000 - [04]: 480x113

3:815 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(1,GPT,720D6289-EA74-409B-A02B-A652E4BB09C0,0x28,0x64000)

3:816 0:000 Using embedded font: Success

3:816 0:000 === [ GetMacAddress ] =====================================

3:816 0:000 MAC address of LAN #0= 64:4B:F0:01:90:CB:

3:816 0:000 MAC address of LAN #1= 70:85:C2:47:96:DA:

3:816 0:000 === [ ScanSPD ] ===========================================

3:817 0:000 SMBus device : 8086 A2A3 class=0C0500 status=Success

3:817 0:000 SMBus CmdReg: 0x3

3:817 0:000 Scanning SMBus [8086:A2A3], mmio: 0xFFF10004, ioport: 0xF000, hostc: 0x1

3:817 0:000 Slots to scan [8]...

3:818 0:000 SPD[0]: Got invalid type 0 @0x50. Will set page and retry.

3:818 0:000 SPD[0]: Type 12 @0x50

3:836 0:017 XMP Profile1: 5*125 0 ns

3:836 0:000 Found module with XMP version 2.0

3:836 0:000 Using XMP Profile1 instead of standard frequency 2132MHz

3:836 0:000 DDR speed 3200MHz

3:836 0:000 Slot: 0 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=0000000000000000

3:837 0:000 SPD[1]: Type 12 @0x51

3:855 0:017 XMP Profile1: 5*125 0 ns

3:855 0:000 Found module with XMP version 2.0

3:855 0:000 Using XMP Profile1 instead of standard frequency 2132MHz

3:855 0:000 DDR speed 3200MHz

3:855 0:000 Slot: 1 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=0000000000000000

3:855 0:000 SPD[2]: Type 12 @0x52

3:873 0:017 XMP Profile1: 5*125 0 ns

3:873 0:000 Found module with XMP version 2.0

3:873 0:000 Using XMP Profile1 instead of standard frequency 2132MHz

3:873 0:000 DDR speed 3200MHz

3:873 0:000 Slot: 2 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=0000000000000000

3:874 0:000 SPD[3]: Type 12 @0x53

3:892 0:017 XMP Profile1: 5*125 0 ns

3:892 0:000 Found module with XMP version 2.0

3:892 0:000 Using XMP Profile1 instead of standard frequency 2132MHz

3:892 0:000 DDR speed 3200MHz

3:892 0:000 Slot: 3 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=0000000000000000

3:892 0:000 === [ GetAcpiTablesList ] =================================

3:899 0:006 Get Acpi Tables List from RSDT:

3:899 0:000 - [00]: FACP A M I len=132

3:899 0:000 - [01]: APIC A M I len=188

3:899 0:000 - [02]: FPDT A M I len=68

3:899 0:000 - [03]: MCFG A M I len=60

3:899 0:000 - [04]: SSDT SataTabl len=887

3:899 0:000 - [05]: FIDT A M I len=156

3:899 0:000 - [06]: SSDT SaSsdt len=12628

3:899 0:000 - [07]: SSDT PegSsdt len=9163

3:899 0:000 - [08]: HPET SKL len=56

3:899 0:000 - [09]: SSDT xh_rvp08 len=2607

3:899 0:000 - [10]: UEFI EDK2 len=66

3:899 0:000 - [11]: SSDT CpuSsdt len=3806

3:899 0:000 - [12]: AAFT OEMAAFT len=1204

3:899 0:000 - [13]: LPIT SKL len=148

3:899 0:000 - [14]: WSMT SKL len=40

3:899 0:000 - [15]: DBGP len=52

3:899 0:000 - [16]: DBG2 len=84

3:899 0:000 - [17]: VFCT A M I len=60548

3:899 0:000 - [18]: BGRT A M I len=56

3:899 0:000 - [19]: ASF! HCG len=160

3:899 0:000 Calibrated TSC Frequency = 4008557620 = 4008MHz

3:899 0:000 === [ GetUserSettings ] ===================================

3:899 0:000 USB FixOwnership: yes

3:899 0:000 Dropping 8 tables:

3:899 0:000 - [00]: Drop table signature="SSDT" (54445353) table-id="CpuCst" (0000747343757043)

3:899 0:000 - set table: 54445353, 747343757043 to drop: no

3:899 0:000 - [01]: Drop table signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)

3:899 0:000 - set table: 54445353, 6D50757043 to drop: no

3:899 0:000 - [02]: Drop table signature="SSDT" (54445353) table-id="CpuSsdt" (0074647353757043)

3:899 0:000 - set table: 54445353, 74647353757043 to drop: yes

3:899 0:000 - [03]: Drop table signature="SSDT" (54445353) table-id="PegSsdt" (0074647353676550)

3:899 0:000 - set table: 54445353, 74647353676550 to drop: yes

3:899 0:000 - [04]: Drop table signature="SSDT" (54445353) table-id="SaSsdt" (0000746473536153)

3:899 0:000 - set table: 54445353, 746473536153 to drop: no

3:899 0:000 - [05]: Drop table signature="SSDT" (54445353) table-id="SataTabl" (6C62615461746153)

3:899 0:000 - set table: 54445353, 6C62615461746153 to drop: yes

3:899 0:000 - [06]: Drop table signature="SSDT" (54445353) table-id="xh_rvp08" (38307076725F6878)

3:899 0:000 - set table: 54445353, 38307076725F6878 to drop: yes

3:899 0:000 - [07]: Drop table signature="DMAR" (52414D44)

3:899 0:000 - set table: 52414D44, 0 to drop: no

3:899 0:000 - final DSDT Fix mask=20430085

3:899 0:000 PatchesDSDT: 4 requested

3:899 0:000 - [00]: (Rename _OSI to XOSI) lenToFind: 4, lenToReplace: 4

3:899 0:000 - [01]: (Rename HDAS to HDEF) lenToFind: 4, lenToReplace: 4

3:899 0:000 - [02]: (Rename SAT0 to SATA) lenToFind: 4, lenToReplace: 4

3:899 0:000 - [03]: (Rename H_EC to EC) lenToFind: 4, lenToReplace: 4

3:900 0:000 Using ProductName from config

3:900 0:000 ProductName: iMac18,3

3:900 0:000 Found same BiosVersion in clover and config

3:900 0:000 BiosVersion: IM183.88Z.0151.B00.1708080034

3:900 0:000 BiosReleaseDate: 08/08/2017

3:900 0:000 Using FirmwareFeatures from config

3:900 0:000 FirmwareFeatures: 0xFC0FE136

3:900 0:000 Using FirmwareFeaturesMask from config

3:900 0:000 FirmwareFeaturesMask: 0xFF1FFF3F

3:900 0:000 PlatformFeature: 0x0

3:900 0:000 Board-ID set from config as Mac-BE088AF8C5EB4FA2

3:900 0:000 BoardType: 0xA

3:900 0:000 ChassisType: 0x9

3:903 0:003 === [ ScanVolumes ] =======================================

3:903 0:000 Found 14 volumes with blockIO

3:903 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)

3:903 0:000 Found optical drive

3:903 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)

3:903 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(1,GPT,720D6289-EA74-409B-A02B-A652E4BB09C0,0x28,0x64000)

3:903 0:000 Result of bootcode detection: bootable unknown (legacy)

3:903 0:000 This is SelfVolume !!

3:903 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)

3:903 0:000 Result of bootcode detection: bootable unknown (legacy)

3:903 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(3,GPT,63C709C0-F08E-4289-883F-9168344CF5B4,0x1D08D148,0x138800)

3:903 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)

3:904 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(1,GPT,248D8987-1278-4608-8BE3-5539F49675AB,0x800,0xF9800)

3:904 0:000 Result of bootcode detection: bootable Windows (vista,win)

3:904 0:000 - [07]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(2,GPT,D06276AE-C698-4322-A7BD-856F480F1B42,0xFA000,0x32000)

3:904 0:000 Result of bootcode detection: bootable Windows (vista,win)

3:904 0:000 - [08]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(3,GPT,45E54BC0-D8F3-4BD8-B1C0-C787609EDDD5,0x12C000,0x8000)

3:904 0:000 - [09]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(4,GPT,081E5F11-6E6E-4976-A1E7-F556B301B0DE,0x134000,0x1DBBF000)

3:904 0:000 Result of bootcode detection: bootable Windows (vista,win)

3:904 0:000 - [10]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,6E8288321DC8AF4FB39EF530E02F4D00)

3:904 0:000 - [11]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83)

3:904 0:000 - [12]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,85578F84A8D72C448459823DDC301040)

3:904 0:000 - [13]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,0C6A961A72BC6E4CB6A2D243B967BAF0)

3:904 0:000 === [ InitTheme ] =========================================

3:905 0:000 GlobalConfig: theme.plist not found, get random theme Classic Mac OS

3:905 0:000 Using theme 'Classic Mac OS' (EFI\CLOVER\themes\Classic Mac OS)

3:905 0:000 OS main and drive as badge

3:907 0:001 Loading font from ThemeDir: Success

3:908 0:000 Choosing theme Classic Mac OS

3:908 0:000 after NVRAM boot-args=-v -f

3:908 0:000 === [ Dump SMC keys from NVRAM ] ==========================

3:908 0:000 found AppleSMC protocol

3:962 0:053 === [ AddCustomEntries ] ==================================

3:962 0:000 Custom entry 0 skipped because it is hidden.

3:962 0:000 Custom entry 1 skipped because it is hidden.

3:962 0:000 Custom entry 2 skipped because it is hidden.

3:962 0:000 Custom entry 2 skipped because it is hidden.

3:962 0:000 Custom entry 2 skipped because it is hidden.

3:962 0:000 Custom entry 2 skipped because it is hidden.

3:962 0:000 Custom entry 2 skipped because it is hidden.

3:962 0:000 === [ ScanLoader ] ========================================

3:962 0:000 - [02]: 'EFI'

3:972 0:010 - [06]: 'Wiederherstellung'

3:979 0:006 - [07]: 'EFI'

3:980 0:000 AddLoaderEntry for Volume Name=EFI

3:980 0:000 Not match custom entry 0: Type: not match

3:980 0:000 Not match custom entry 1: Volume: not match, Type: not match

3:980 0:000 Not match custom entry 2: Volume: not match, Type: not match

3:988 0:008 - [09]: 'WINDOWS_10'

3:995 0:006 - [10]: 'Preboot'

4:017 0:022 AddLoaderEntry for Volume Name=Preboot

4:017 0:000 Not match custom entry 0: Type: not match

4:017 0:000 Skipped because matching custom entry 1!

4:024 0:006 AddLoaderEntry for Volume Name=Preboot

4:024 0:000 Not match custom entry 0: Type: not match

4:024 0:000 Not match custom entry 1: Volume: match, Type: not match

4:024 0:000 Skipped because matching custom entry 2!

4:059 0:035 - [11]: 'HIGH_SIERRA_PCIe'

4:117 0:057 AddLoaderEntry for Volume Name=HIGH_SIERRA_PCIe

4:117 0:000 Not match custom entry 0: Type: not match

4:117 0:000 Not match custom entry 1: Volume: not match, Type: match

4:117 0:000 Not match custom entry 2: Volume: not match, Type: not match

4:149 0:032 hibernated: set as never

4:201 0:051 - [12]: 'Recovery'

4:220 0:019 AddLoaderEntry for Volume Name=Recovery

4:221 0:000 Skipped because matching custom entry 0!

4:257 0:036 - [13]: 'VM'

4:264 0:006 === [ AddCustomTool ] =====================================

4:264 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi

4:264 0:000 Checking EFI partition Volume 2 for Clover

4:264 0:000 Found Clover

4:266 0:001 === [ GetEfiBootDeviceFromNvram ] =========================

4:267 0:000 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83)

4:267 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83)'

4:267 0:000 - LoaderPath: ''

4:267 0:000 - Guid = 535A8AC0-AEB6-4C9B-8216-FC10937ADE34

4:267 0:000 === [ FindStartupDiskVolume ] =============================

4:267 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83)

4:267 0:000 - searching for that partition

4:267 0:000 - found entry 1. 'Boot macOS from HIGH_SIERRA_PCIe', Volume 'HIGH_SIERRA_PCIe'

4:267 0:000 Boot redirected to Entry 1. 'Boot macOS from HIGH_SIERRA_PCIe'

4:267 0:000 DefaultIndex=1 and MainMenu.EntryCount=8

4:357 0:090 GUI ready

81:532 77:175 BootVariable of the entry is empty

81:532 0:000 === [ StartLoader ] =======================================

81:532 0:000 Finally: ExternalClock=25MHz BusSpeed=100213kHz CPUFreq=4009MHz PIS: hw.busfrequency=100000000Hz

81:532 0:000 Loading boot.efi status=Success

81:562 0:030 GetOSVersion: 10.13.2 (17C60c)

81:562 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_ALLOW_ANY_RECOVERY_OS | CSR_ALLOW_UNAPPROVED_KEXTS

81:562 0:000 Filtering KextPatches:

81:562 0:000 - [00]: AMD9500Controller (ORINOCO FB patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed

81:562 0:000 - [01]: AMD9500Controller (Connectors Patch for Framebuffer ACRE for RX460 NITRO) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed

81:562 0:000 - [02]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed

81:562 0:000 - [03]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed

81:562 0:000 - [04]: AppleUSBXHCIPCI (Change 15 port limit to 24 in XHCI kext 10.13 PB1) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> disabled by user

81:562 0:000 Will not patch boot.efi

81:562 0:000 === [ PatchSmbios ] =======================================

81:562 0:000 insert table 9 for dev 0:0

81:562 0:000 insert table 9 for dev 0:1

81:562 0:000 insert table 9 for dev 1F:6

81:562 0:000 insert table 9 for dev 0:0

81:563 0:000 Trusting SMBIOS...

81:563 0:000 Channels: 2

81:563 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23

81:563 0:000 partNum=CMK32GX4M4B3200C16

81:563 0:000 SMBIOS Type 17 Index = 0 => 0 0:

81:563 0:000 BANK 0 DIMM0 3200MHz 8192MB

81:563 0:000 partNum=CMK32GX4M4B3200C16

81:563 0:000 SMBIOS Type 17 Index = 1 => 2 2:

81:563 0:000 BANK 1 DIMM0 3200MHz 8192MB

81:563 0:000 partNum=CMK32GX4M4B3200C16

81:563 0:000 SMBIOS Type 17 Index = 2 => 1 1:

81:563 0:000 BANK 0 DIMM1 3200MHz 8192MB

81:563 0:000 partNum=CMK32GX4M4B3200C16

81:563 0:000 SMBIOS Type 17 Index = 3 => 3 3:

81:563 0:000 BANK 1 DIMM1 3200MHz 8192MB

81:563 0:000 mTotalSystemMemory = 32768

81:563 0:000 NumberOfMemoryDevices = 4

81:563 0:000 Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000

81:563 0:000 Type20[1]->End = 0x17FFFFF, Type17[2] = 0x8000

81:563 0:000 Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC000

81:563 0:000 Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000

81:563 0:000 Table 131 is present, CPUType=10

81:563 0:000 Change to: 705

81:563 0:000 === [ PatchACPI ] =========================================

81:563 0:000 RSDT 0x8EE18028

81:563 0:000 FADT from RSDT: 0x8EE18180

81:563 0:000 XSDT 0x8EE180A8

81:563 0:000 FADT from XSDT: 0x8EE3C7F0

81:563 0:000 Xsdt reallocation done

81:563 0:000 old FADT length=114

81:565 0:002 Apply DsdtFixMask=0x20430085

81:565 0:000 drop _DSM mask=0xFFFF

81:565 0:000 === [ FixBiosDsdt ] =======================================

81:565 0:000 VideoCard devID=0x67DF1002

81:565 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0

81:565 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE

81:566 0:000 USBADR[1] = 0x1C0000 and PCIe = 0x0

81:566 0:000 USBADR[2] = 0x1C0000 and PCIe = 0x0

81:566 0:000 Patching DSDT:

81:566 0:000 - [Rename _OSI to XOSI]: pattern 5F4F5349, patched at: [ (AD06) (889B) (3) (11) (18) (1C) (1C) (1A) (18) (18) (18) (18) ]

81:566 0:000 - [Rename HDAS to HDEF]: pattern 48444153, patched at: [ (2E7) (12) (12) (BD7E) (157F) (84) (D) (2B) (32) (4F) (6F) (C3) (15866) ]

81:567 0:000 - [Rename SAT0 to SATA]: pattern 53415430, patched at: [ (329) (16) (D) (16) (16) (D) (16) (16) (D) (16) (D4EF) (30) (12471) (1501) (4E2) (2A) (29) (2E) (2E) (2E) ]

81:567 0:000 - [Rename H_EC to EC]: pattern 485F4543, patched at: [ (2D1) (2D6) (CEB6) (10) (534A) (1B) (15) (14) (139) (15) (25) (22) (15) (763) (16) (16) (33) (185) (9A) (A9C) (12) (F) (29) (12) (F) (2322) (14) (13A) (14) (CBC6) (1F) (24) (25) (57) (12) (10) (1D) (12) (10) (1B) (11) (1C) (11) (48D) (516) ]

81:567 0:000 first CPU found at A9BD offset A9C0

81:567 0:000 score candidate at A9B9

81:567 0:000 score inserted in acpi_cpu_score _PR_

81:567 0:000 Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_

81:567 0:000 Found PCIROOTUID = 0

81:567 0:000 Start RTC Fix

81:568 0:000 found RTC Length not match, Maybe will cause CMOS reset will patch it.

81:568 0:000 found RTC had IRQNoFlag will move -3 bytes

81:568 0:000 ...len=24625

81:568 0:000 new size written to 2345A shift=0 len=24625

81:568 0:000 len after correct outers 24625

81:568 0:000 Start SBUS Fix PCI=377D len=24625

81:568 0:000 device (SBUS) found at C38D

81:568 0:000 _DSM in SBUS already exists, dropped

81:568 0:000 SBUS code size fix = 0x0000005E

81:568 0:000 deleting device CRT_

81:569 0:000 deleting device DVI_

81:569 0:000 deleting device SPKR

81:569 0:000 deleting device ECP_

81:569 0:000 deleting device LPT_

81:570 0:000 deleting device FDC0

81:570 0:000 deleting device ECP1

81:570 0:000 deleting device LPT1

81:570 0:000 deleting device EPC_

81:571 0:000 Start Darwin Fix

81:571 0:000 Start SHUTDOWN Fix len=245C7

81:571 0:000 === [ ACPIDropTables ] ====================================

81:571 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=CpuSsdt Length=3806

81:571 0:000 Xsdt has tables count=21

81:571 0:000 Table: SSDT CpuSsdt 3806 dropped

81:571 0:000 First zero in XSDT table

81:571 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=xh_rvp08 Length=2607

81:571 0:000 Xsdt has tables count=19

81:571 0:000 Table: SSDT xh_rvp08 2607 dropped

81:571 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=PegSsdt Length=9163

81:571 0:000 Xsdt has tables count=18

81:572 0:000 Table: SSDT PegSsdt 9163 dropped

81:572 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=SataTabl Length=887

81:572 0:000 Xsdt has tables count=17

81:572 0:000 Table: SSDT SataTabl 887 dropped

81:572 0:000 === [ ACPIPatchedAML ] ====================================

81:572 0:000 Sorted

81:572 0:000 Inserting table[0]:SSDT-2-PegSsdt.aml from EFI\CLOVER\ACPI\patched ... Success

81:572 0:000 Inserting table[1]:SSDT-5-Tbt3.aml from EFI\CLOVER\ACPI\patched ... Success

81:572 0:000 Inserting table[2]:SSDT-7-eGpu.aml from EFI\CLOVER\ACPI\patched ... Success

81:573 0:000 Inserting table[3]:SSDT-3-UsbFix.aml from EFI\CLOVER\ACPI\patched ... Success

81:573 0:000 Inserting table[4]:SSDT-6-Xosi.aml from EFI\CLOVER\ACPI\patched ... Success

81:574 0:000 === [ PatchAllSSDT ] ======================================

81:574 0:000 Patch table: SSDT SaSsdt len=0x3154

81:574 0:000 0. [Rename _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched!

81:574 0:000 1. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!

81:574 0:000 2. [Rename SAT0 to SATA]: pattern 53415430, bin not found / already patched!

81:574 0:000 3. [Rename H_EC to EC]: pattern 485F4543, bin not found / already patched!

81:574 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0

81:574 0:000 Xsdt has tables count=21

81:574 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1

81:574 0:000 Maximum control=0x28

81:574 0:000 Turbo control=0x2A

81:574 0:000 P-States: min 0x8, max 0x2A

81:574 0:000 SSDT with plugin-type without P-States is generated

81:574 0:000 === [ RestSetup macOS ] ===================================

81:574 0:000 EdidDiscovered size=128

81:574 0:000 Inject EDID

81:574 0:000 ------- EDID Table

81:574 0:000 000 | 00 FF FF FF FF FF FF 00 1E 6D

81:574 0:000 010 | 09 5B 65 BC 05 00 09 1A 01 04

81:574 0:000 020 | B5 3C 22 78 9F 30 35 A7 55 4E

81:574 0:000 030 | A3 26 0F 50 54 21 08 00 71 40

81:574 0:000 040 | 81 80 81 C0 A9 C0 D1 C0 81 00

81:574 0:000 050 | 01 01 01 01 4D D0 00 A0 F0 70

81:574 0:000 060 | 3E 80 30 20 65 0C 58 54 21 00

81:574 0:000 070 | 00 1A 28 68 00 A0 F0 70 3E 80

81:574 0:000 080 | 08 90 65 0C 58 54 21 00 00 1A

81:574 0:000 090 | 00 00 00 FD 00 30 3D 87 87 38

81:574 0:000 100 | 01 0A 20 20 20 20 20 20 00 00

81:574 0:000 110 | 00 FC 00 4C 47 20 55 6C 74 72

81:574 0:000 120 | 61 20 48 44 0A 20 01 0F

81:574 0:000 VendorID = 0x1E6D

81:574 0:000 ProductID = 0x5B09

81:574 0:000 ------- New EDID Table

81:574 0:000 000 | 00 FF FF FF FF FF FF 00 6D 1E

81:574 0:000 010 | 09 5B 65 BC 05 00 09 1A 01 04

81:574 0:000 020 | B5 3C 22 78 9F 30 35 A7 55 4E

81:574 0:000 030 | A3 26 0F 50 54 21 08 00 71 40

81:574 0:000 040 | 81 80 81 C0 A9 C0 D1 C0 81 00

81:574 0:000 050 | 01 01 01 01 4D D0 00 A0 F0 70

81:574 0:000 060 | 3E 80 30 20 65 0C 58 54 21 00

81:574 0:000 070 | 00 1A 28 68 00 A0 F0 70 3E 80

81:574 0:000 080 | 08 90 65 0C 58 54 21 00 00 1A

81:574 0:000 090 | 00 00 00 FD 00 30 3D 87 87 38

81:574 0:000 100 | 01 0A 20 20 20 20 20 20 00 00

81:574 0:000 110 | 00 FC 00 4C 47 20 55 6C 74 72

81:574 0:000 120 | 61 20 48 44 0A 20 01 0F

81:574 0:000 ATI injection not set

81:575 0:000 RCBA disabled; cannot use it

81:575 0:000 stringlength = 2160

81:575 0:000 CurrentMode: Width=3840 Height=2160

81:575 0:000 Beginning FSInjection

FSInjectionInstall ...

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 8B2F2F18

FSInjectionInstall ...

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 8B2F2F18

81:581 0:006 Use origin smbios table type 1 guid.

81:593 0:011 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other

81:593 0:000 Extra kext: EFI\CLOVER\kexts\Other\AMD9xxxControllerPatcher.kext

81:595 0:002 Extra kext: EFI\CLOVER\kexts\Other\Z270-USB.kext

81:596 0:001 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext

81:599 0:002 |-- PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\IntelCPUMonitor.kext

81:600 0:001 |-- PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\W836x.kext

81:601 0:001 Extra kext: EFI\CLOVER\kexts\Other\AppleIGB.kext

81:604 0:002 Extra kext: EFI\CLOVER\kexts\Other\EFICheckDisabler.kext

81:607 0:002 Extra kext: EFI\CLOVER\kexts\Other\IntelMausiEthernet.kext

81:610 0:003 SetStartupDiskVolume:

81:610 0:000 * Volume: 'HIGH_SIERRA_PCIe'

81:610 0:000 * LoaderPath: ''

81:610 0:000 * DevPath: HIGH_SIERRA_PCIe

81:610 0:000 * GUID = 535A8AC0-AEB6-4C9B-8216-FC10937ADE34

81:610 0:000 * efi-boot-device: IOMatchIOProviderClassIOMediaIOPropertyMatchUUID535A8AC0-AEB6-4C9B-8216-FC10937ADE34

81:611 0:000 Custom boot screen not used because entry has unset use graphics

 

 

Share this post


Link to post
Share on other sites
Advertisement

Test, please, rev 4289. Looks good.

yes - 4289 works via compile and test. (compile and run with Xcode 9.1 on 10.13.2beta)

And when doing a diff from rehabman's AcpiPatcher.c the new version is functionally identical.

$ diff -bEBw AcpiPatcher.c ./edk2/Clover/rEFIt_UEFI/Platform/AcpiPatcher.c|grep -v "//"
36d35
< #define SSDT_SIGN        SIGNATURE_32('S','S','D','T')
200a203
236a242
256a263
594d601
595a603
738c747
<       if (hdr->Signature != SSDT_SIGN || MatchIndex != -1) {
---
>       if (hdr->Signature != EFI_ACPI_4_0_SECONDARY_SYSTEM_DESCRIPTION_TABLE_SIGNATURE || MatchIndex != -1) {
755c764
<       if (hdr->Signature != SSDT_SIGN || MatchIndex != -1) {
---
>       if (hdr->Signature != EFI_ACPI_4_0_SECONDARY_SYSTEM_DESCRIPTION_TABLE_SIGNATURE || MatchIndex != -1) {

Share this post


Link to post
Share on other sites

Everything also looks fine here as well. I tested r4289 on my Legacy system which I had trouble booting into macOS Sierra last night using r4287 and r4288.

 

Thanks

 

 

 

0:100  0:100  MemLog inited, TSC freq: 2999661419

0:100  0:000  LegacyRegion2: Chipset/proc: 0x2E208086

0:100  0:000   Intel Series 4 and similar (PAM 0x90-0x96)

0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=00, 0x91=11) at chipset 2E208086

0:100  0:000  , Install = Success

0:110  0:010  BiosVideoDriverBindingStart!

0:110  0:000  BiosVideoCheckForVbe

0:110  0:000  EdidOverride not found

0:113  0:002   Edid1+

0:113  0:000   found Detail Timing 1920x1080

0:113  0:000   found Detail Timing 1360x768

0:115  0:002   Edid0+

0:115  0:000   found Detail Timing 1920x1080

0:115  0:000  ... already present

0:115  0:000   found Detail Timing 1360x768

0:115  0:000  ... already present

0:119  0:003     0 1280x960 attr=BB - ok, edid+, working, highest, pref=0

0:120  0:000     1 640x480 attr=BB - ok, edid+, 640x480, working

0:120  0:000     2 800x600 attr=BB - ok, edid+, 800x600, working

0:120  0:000     3 1024x768 attr=BB - ok, edid+, 1024x768, working

0:120  0:000     4 1280x1024 attr=BB - ok, edid+, working, highest, pref=4

0:121  0:000     5 1400x1050 attr=BB - ok, edid-

0:122  0:001     6 1920x1080 attr=BB - ok, edid+, working, highest, pref=6

0:123  0:000     7 1360x768 attr=BB - ok, edid+, working

0:123  0:000  BV new mode: 6 1920x1080

0:209  0:086   SetMode pref 6 (6) = Success

2:193  1:983  

2:193  0:000  Now is 2.11.2017,  18:54:30 (GMT)

2:193  0:000  Starting Clover revision: 4289 on CLOVER EFI

2:193  0:000  Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 9 | OS: 10.13.1 | XCODE: 9.1]

2:193  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x0,0x0)\HD(1,GPT,BFF998B5-1815-452C-84B4-169B2F68C418,0x28,0x64000) @BF00DC18

2:193  0:000  SelfDirPath = \EFI\CLOVER

2:193  0:000  === [ Get Smbios ] ========================================

2:193  0:000  Type 16 Index = 0

2:193  0:000  Total Memory Slots Count = 4

2:193  0:000  Type 17 Index = 0

2:193  0:000  SmbiosTable.Type17->Speed = 800MHz

2:193  0:000  SmbiosTable.Type17->Size = 2048MB

2:193  0:000  SmbiosTable.Type17->Bank/Device = Bank0/1 A0

2:193  0:000  SmbiosTable.Type17->Vendor =  

2:193  0:000  SmbiosTable.Type17->SerialNumber =  

2:193  0:000  SmbiosTable.Type17->PartNumber =  

2:193  0:000  Type 17 Index = 1

2:193  0:000  SmbiosTable.Type17->Speed = 800MHz

2:193  0:000  SmbiosTable.Type17->Size = 2048MB

2:193  0:000  SmbiosTable.Type17->Bank/Device = Bank2/3 A1

2:193  0:000  SmbiosTable.Type17->Vendor =  

2:193  0:000  SmbiosTable.Type17->SerialNumber =  

2:193  0:000  SmbiosTable.Type17->PartNumber =  

2:193  0:000  Type 17 Index = 2

2:193  0:000  SmbiosTable.Type17->Speed = 800MHz

2:193  0:000  SmbiosTable.Type17->Size = 2048MB

2:193  0:000  SmbiosTable.Type17->Bank/Device = Bank4/5 A2

2:193  0:000  SmbiosTable.Type17->Vendor =  

2:193  0:000  SmbiosTable.Type17->SerialNumber =  

2:193  0:000  SmbiosTable.Type17->PartNumber =  

2:193  0:000  Type 17 Index = 3

2:193  0:000  SmbiosTable.Type17->Speed = 800MHz

2:193  0:000  SmbiosTable.Type17->Size = 2048MB

2:193  0:000  SmbiosTable.Type17->Bank/Device = Bank6/7 A3

2:193  0:000  SmbiosTable.Type17->Vendor =  

2:193  0:000  SmbiosTable.Type17->SerialNumber =  

2:193  0:000  SmbiosTable.Type17->PartNumber =  

2:193  0:000  Boot status=0

2:193  0:000  Running on: 'EP45-DS3R' with board 'EP45-DS3R'

2:193  0:000  === [ GetCPUProperties ] ==================================

2:193  0:000  CPU Vendor = 756E6547 Model=1067A

2:193  0:000   The CPU supported SSE4.1

2:193  0:000  BrandString = Intel® Core2 Duo CPU     E8400  @ 3.00GHz

2:193  0:000  got cores from CPUID_1 = 2

2:193  0:000   The CPU not supported turbo

2:193  0:000  MSR dumps:

2:193  0:000  @0x00CD=80000804

2:193  0:000  @0x0198=616091F0600091F

2:193  0:000  FSBFrequency = 444 MHz, DMI FSBFrequency = 333 MHz, Corrected FSBFrequency = 333 MHz

2:193  0:000  MaxDiv/MinDiv: 9.0/6

2:193  0:000  Turbo: 10/0/0/0

2:193  0:000  Features: 0xBFEBFBFF

2:193  0:000  Threads: 2

2:193  0:000  Cores: 2

2:193  0:000  FSB: 333 MHz

2:193  0:000  CPU: 4000 MHz

2:193  0:000  TSC: 4000 MHz

2:193  0:000  PIS: 1333 MHz

2:193  0:000  ExternalClock: 333 MHz

2:193  0:000  === [ GetDevices ] ========================================

2:193  0:000  PCI (00|00:00.00) : 8086 2E20 class=060000

2:193  0:000  PCI (00|00:01.00) : 8086 2E21 class=060400

2:193  0:000  PCI (00|01:00.00) : 1002 665C class=030000

2:193  0:000   - GFX: Model=AMD Radeon HD 7790 (ATI/AMD)

2:193  0:000  PCI (00|01:00.01) : 1002 AAC0 class=040300

2:193  0:000   - HDMI Audio: 

2:193  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300

2:193  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300

2:193  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300

2:193  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320

2:193  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300

2:193  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400

2:193  0:000  PCI (00|02:00.00) : 1106 3483 class=0C0330

2:193  0:000  PCI (00|00:1C.04) : 8086 3A48 class=060400

2:194  0:000  PCI (00|03:00.00) : 10EC 8168 class=020000

2:194  0:000   - LAN: 0 Vendor=Realtek

2:194  0:000  PCI (00|00:1C.05) : 8086 3A4A class=060400

2:194  0:000  PCI (00|04:00.00) : 10EC 8168 class=020000

2:194  0:000   - LAN: 1 Vendor=Realtek

2:194  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300

2:194  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300

2:194  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300

2:194  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320

2:194  0:000  PCI (00|00:1E.00) : 8086 244E class=060401

2:194  0:000  PCI (00|05:07.00) : 104C 8024 class=0C0010

2:194  0:000  PCI (00|00:1F.00) : 8086 3A16 class=060100

2:194  0:000  PCI (00|00:1F.02) : 8086 3A22 class=010601

2:194  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500

2:194  0:000  === [ GetDefaultSettings ] ================================

2:194  0:000  Clover load options size = 0 bytes

2:233  0:038  EFI\CLOVER\config.plist loaded: Success

2:233  0:000  ---dump hibernations data---

2:237  0:004    Firmware wake address=00000000

2:237  0:000    Firmware wake 64 addr=               0

2:237  0:000    Hardware signature   =00000000

2:237  0:000    GlobalLock           =00000000

2:237  0:000    Flags                =00000000

2:237  0:000  === [ GetListOfThemes ] ===================================

2:287  0:050  - [00]: Dev

2:326  0:038  === [ Found config plists ] ===============================

2:326  0:000  - config.plist

2:326  0:000  === [ GetEarlyUserSettings ] ==============================

2:326  0:000  timeout set to 4

2:326  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)

2:326  0:000  KextsToPatch: 5 requested

2:326  0:000   - [00]: AppleHDA (t1-t1-110.9-10.12-AppleHDA/Realtek ALC885 (Optional)) :: BinPatch :: data len: 4

2:326  0:000   - [01]: AppleHDA (t1-110.9-10.12-AppleHDA/Realtek ALC885 (Optional)) :: BinPatch :: data len: 4

2:326  0:000   - [02]: AppleHDA (t1-AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6

2:326  0:000   - [03]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8

2:326  0:000   - [04]: AppleUSBXHCIPCI (change 15 port limit to 26 in XHCI kext (100-series)) :: MatchOS: 10.12.x :: BinPatch :: data len: 7

2:326  0:000  Default theme: Dev

2:326  0:000  === [ LoadDrivers ] =======================================

2:339  0:012  Loading AppleImageCodec-64.efi  status=Success

2:365  0:025  Loading AppleKeyAggregator-64.efi  status=Success

2:365  0:000  Loading AppleUITheme-64.efi  status=Success

2:365  0:000  Loading FirmwareVolume-64.efi  status=Success

2:365  0:000  Loading FSInject-64.efi  status=Success

2:365  0:000  Loading SMCHelper-64.efi  status=Success

2:379  0:013  Video bios patch requested or CustomEDID - forcing video reconnect

2:379  0:000  1 drivers needs connecting ...

2:379  0:000  PlatformDriverOverrideProtocol->GetDriver overriden

2:379  0:000  Video driver loaded: disconnect Success

2:410  0:031  VideoBiosPatchNativeFromEdid:

2:410  0:000   Bios: ATI, MasterDataTables: 0xCA132, std_vesa: 0xCA178, ati_mode_table: 0xCA17C, mode_table_size: 0xE0 BT_ATI_1

2:410  0:000   VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Success) = Success

2:410  0:000   VideoBiosUnlock:  unlocked

2:410  0:000   Patching: BT_ATI_1

2:410  0:000   Parse Edid: descriptor block 0 is timing descriptor (h_active: 1920, v_active: 1080, h_sync_offset: 88, h_sync_width: 44, h_blanking: 280, v_blanking: 45, pixel_clock: 14850, v_sync_offset: 4, v_sync_width: 5)

2:410  0:000   mode 0 (640x32) patched to 1920x1080

2:410  0:000   VideoBiosLock: Success

2:421  0:011  BiosVideoDriverBindingStart!

2:421  0:000  BiosVideoCheckForVbe

2:421  0:000  EdidOverride not found

2:424  0:002   Edid1+

2:424  0:000   found Detail Timing 1920x1080

2:424  0:000   found Detail Timing 1360x768

2:427  0:002   Edid0+

2:427  0:000   found Detail Timing 1920x1080

2:427  0:000  ... already present

2:427  0:000   found Detail Timing 1360x768

2:427  0:000  ... already present

2:431  0:004     0 1280x960 attr=BB - ok, edid+, working, highest, pref=0

2:431  0:000     1 640x480 attr=BB - ok, edid+, 640x480, working

2:431  0:000     2 800x600 attr=BB - ok, edid+, 800x600, working

2:431  0:000     3 1024x768 attr=BB - ok, edid+, 1024x768, working

2:432  0:000     4 1280x1024 attr=BB - ok, edid+, working, highest, pref=4

2:432  0:000     5 1400x1050 attr=BB - ok, edid-

2:434  0:001     6 1920x1080 attr=BB - ok, edid+, working, highest, pref=6

2:435  0:000     7 1360x768 attr=BB - ok, edid+, working

2:435  0:000  BV new mode: 6 1920x1080

2:526  0:091   SetMode pref 6 (6) = Success

2:608  0:081  === [ InitScreen ] ========================================

2:608  0:000  SetScreenResolution: 1920x1080 - already set

2:608  0:000  Console modes reported: 4, available modes:

2:608  0:000   - [01]: 80x25

2:608  0:000   - [02]: 80x50

2:608  0:000   - [03]: 100x31

2:608  0:000   - [04]: 240x56 (current mode)

2:608  0:000  SetScreenResolution: 1920x1080 - already set

2:608  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x0,0x0)\HD(1,GPT,BFF998B5-1815-452C-84B4-169B2F68C418,0x28,0x64000)

2:608  0:000  Using embedded font: Success

2:609  0:000  === [ GetMacAddress ] =====================================

2:609  0:000  === [ ScanSPD ] ===========================================

2:609  0:000  SMBus device : 8086 3A30 class=0C0500 status=Success

2:609  0:000  SMBus CmdReg: 0x3

2:609  0:000  Scanning SMBus [8086:3A30], mmio: 0xE8407004, ioport: 0x500, hostc: 0x1

2:609  0:000  Slots to scan [8]...

2:609  0:000  SPD[0]: Type 8 @0x50

2:624  0:014  DDR speed 800MHz

2:624  0:000  Slot: 0 Type 19 2048MB 800MHz Vendor=Geil PartNo=CL6-6-6DDR2-1066 SerialNo=0000000000000000

2:625  0:000  SPD[1]: Type 8 @0x51

2:639  0:014  DDR speed 800MHz

2:639  0:000  Slot: 1 Type 19 2048MB 800MHz Vendor=Geil PartNo=CL6-6-6DDR2-1066 SerialNo=0000000000000000

2:640  0:000  SPD[2]: Type 8 @0x52

2:655  0:014  DDR speed 800MHz

2:655  0:000  Slot: 2 Type 19 2048MB 800MHz Vendor=Geil PartNo=CL6-6-6DDR2-1066 SerialNo=0000000000000000

2:655  0:000  SPD[3]: Type 8 @0x53

2:670  0:014  DDR speed 800MHz

2:670  0:000  Slot: 3 Type 19 2048MB 800MHz Vendor=Geil PartNo=CL6-6-6DDR2-1066 SerialNo=0000000000000000

2:670  0:000  === [ GetAcpiTablesList ] =================================

2:675  0:004  Get Acpi Tables List from RSDT:

2:675  0:000   - [00]: FACP  GBTUACPI len=116

2:675  0:000   - [01]: HPET  GBTUACPI len=56

2:675  0:000   - [02]: MCFG  GBTUACPI len=60

2:675  0:000   - [03]: APIC  GBTUACPI len=132

2:675  0:000   - [04]: SSDT  Cpu0Cst len=394

2:675  0:000   - [05]: SSDT  Cpu1Cst len=394

2:675  0:000   - [06]: SSDT  Cpu2Cst len=394

2:675  0:000   - [07]: SSDT  Cpu3Cst len=394

2:675  0:000   - [08]: SSDT  CpuPm len=939

2:675  0:000  Calibrated TSC Frequency = 2999661419 = 2999MHz

2:675  0:000  === [ GetUserSettings ] ===================================

2:676  0:000  USB FixOwnership: yes

2:676  0:000   - final DSDT Fix mask=00008055

2:676  0:000  PatchesDSDT: 4 requested

2:676  0:000   - [00]: (Change EHC2 to EH02) lenToFind: 4, lenToReplace: 4

2:676  0:000   - [01]: (Change EHC1 to EH01) lenToFind: 4, lenToReplace: 4

2:676  0:000   - [02]: (change _OSI to XOSI) lenToFind: 4, lenToReplace: 4

2:676  0:000   - [03]: (Rename HDAS to HDEF) lenToFind: 4, lenToReplace: 4

2:676  0:000  Using ProductName from config

2:676  0:000  ProductName: Macmini7,1

2:676  0:000  Using latest BiosVersion from clover

2:676  0:000  BiosVersion: MM71.88Z.0226.B00.1709290808

2:676  0:000  BiosReleaseDate: 09/29/2017

2:676  0:000  Using FirmwareFeatures from clover

2:676  0:000  FirmwareFeatures: 0xE00DE137

2:676  0:000  Using FirmwareFeaturesMask from clover

2:676  0:000  FirmwareFeaturesMask: 0xFF1FFF3F

2:676  0:000  Using PlatformFeature from clover

2:676  0:000  PlatformFeature: 0x3

2:676  0:000  Board-ID set from config as Mac-35C5E08120C7EEAF

2:676  0:000  BoardType: 0xA

2:676  0:000  ChassisType: 0x16

2:676  0:000  Converted CustomUUID 68CFF2F5-401F-4462-AD01-514746514CEC

2:767  0:091  === [ ScanVolumes ] =======================================

2:767  0:000  Found 9 volumes with blockIO

2:767  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x0,0x0)

2:779  0:011          Result of bootcode detection: bootable unknown (legacy)

2:779  0:000          USB volume

2:779  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x0,0x0)\HD(1,GPT,BFF998B5-1815-452C-84B4-169B2F68C418,0x28,0x64000)

2:790  0:011          Result of bootcode detection: bootable unknown (legacy)

2:790  0:000          USB volume

2:790  0:000          This is SelfVolume !!

2:790  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x0,0x0)\HD(2,GPT,FDBFE105-7CBF-4E2E-B919-34D130D5A74B,0x64028,0x38A3AD8)

2:802  0:011          USB volume

2:802  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)

2:802  0:000          Result of bootcode detection: bootable unknown (legacy)

2:802  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,GPT,6F120BF7-753E-4F0B-B1BA-EA857ADF2483,0x28,0x64000)

2:802  0:000          Result of bootcode detection: bootable unknown (legacy)

2:819  0:016  - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(2,GPT,0989FCE4-D5EB-41A6-864A-D6E100D89756,0x64028,0x3A3516B0)

2:819  0:000  - [06]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(3,GPT,AF7A3075-0200-4073-98C2-6D8D1FE0FE24,0x3A3B56D8,0x135F20)

2:820  0:000  - [07]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(4,GPT,E2624F06-EEEA-4886-AE32-1B5C4993D044,0x3A4EB5F8,0x3A0E5870)

2:820  0:000  - [08]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(5,GPT,BBF3C261-174B-4AF6-817C-AE0556451B1A,0x745D0E68,0x135F20)

2:903  0:082  PutNvramPlistToRtVars: nvram.plist not found

2:903  0:000  === [ InitTheme ] =========================================

2:916  0:013  Using theme 'Dev' (EFI\CLOVER\themes\Dev)

2:931  0:014  Loading font from ThemeDir: Success

2:931  0:000  Choosing theme Dev

2:931  0:000  after NVRAM boot-args=dart=0 nv_disable=1

2:931  0:000  === [ Dump SMC keys from NVRAM ] ==========================

2:931  0:000  found AppleSMC protocol

2:931  0:000  === [ AddCustomEntries ] ==================================

2:931  0:000  Custom entry 0 FullTitle:"Sierra" Path:"\System\Library\CoreServices\boot.efi" Type:1 Flags:0x2 matching Volume:"4BEDE57A-AC49-4F49-8294-1E6B69D5B2E9"

2:931  0:000      Checking volume "EFI" (PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x0,0x0)\HD(1,GPT,BFF998B5-1815-452C-84B4-169B2F68C418,0x28,0x64000)) ... skipped because media is ignored

2:931  0:000      Checking volume "Install macOS High Sierra" (PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x0,0x0)\HD(2,GPT,FDBFE105-7CBF-4E2E-B919-34D130D5A74B,0x64028,0x38A3AD8)) ... skipped because media is ignored

2:931  0:000      Checking volume "EFI" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,GPT,6F120BF7-753E-4F0B-B1BA-EA857ADF2483,0x28,0x64000)) ... skipped

2:931  0:000      Checking volume "Macintosh HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(2,GPT,0989FCE4-D5EB-41A6-864A-D6E100D89756,0x64028,0x3A3516B0)) ... skipped

2:931  0:000      Checking volume "Recovery HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(3,GPT,AF7A3075-0200-4073-98C2-6D8D1FE0FE24,0x3A3B56D8,0x135F20)) ... skipped

2:931  0:000      Checking volume "HS" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(4,GPT,E2624F06-EEEA-4886-AE32-1B5C4993D044,0x3A4EB5F8,0x3A0E5870)) ... skipped

2:931  0:000      Checking volume "Recovery HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(5,GPT,BBF3C261-174B-4AF6-817C-AE0556451B1A,0x745D0E68,0x135F20)) ... skipped

2:931  0:000  Custom entry 1 FullTitle:"Windows10" Path:"\EFI\Microsoft\Boot\bootmgfw.efi" Options:"-s -h" Type:7 Flags:0x0 matching Volume:"C7F761E3-5B54-4C76-944C-486002109379"

2:931  0:000      Checking volume "EFI" (PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x0,0x0)\HD(1,GPT,BFF998B5-1815-452C-84B4-169B2F68C418,0x28,0x64000)) ... skipped because media is ignored

2:931  0:000      Checking volume "Install macOS High Sierra" (PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x0,0x0)\HD(2,GPT,FDBFE105-7CBF-4E2E-B919-34D130D5A74B,0x64028,0x38A3AD8)) ... skipped because media is ignored

2:931  0:000      Checking volume "EFI" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,GPT,6F120BF7-753E-4F0B-B1BA-EA857ADF2483,0x28,0x64000)) ... skipped

2:931  0:000      Checking volume "Macintosh HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(2,GPT,0989FCE4-D5EB-41A6-864A-D6E100D89756,0x64028,0x3A3516B0)) ... skipped

2:931  0:000      Checking volume "Recovery HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(3,GPT,AF7A3075-0200-4073-98C2-6D8D1FE0FE24,0x3A3B56D8,0x135F20)) ... skipped

2:931  0:000      Checking volume "HS" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(4,GPT,E2624F06-EEEA-4886-AE32-1B5C4993D044,0x3A4EB5F8,0x3A0E5870)) ... skipped

2:931  0:000      Checking volume "Recovery HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(5,GPT,BBF3C261-174B-4AF6-817C-AE0556451B1A,0x745D0E68,0x135F20)) ... skipped

2:931  0:000  === [ ScanLoader ] ========================================

2:931  0:000  - [01]: 'EFI'

2:931  0:000  - [02]: 'Install macOS High Sierra'

2:954  0:022          AddLoaderEntry for Volume Name=Install macOS High Sierra

3:069  0:115  - [04]: 'EFI'

3:098  0:028  - [05]: 'Macintosh HD'

3:119  0:021          AddLoaderEntry for Volume Name=Macintosh HD

3:128  0:009      Check if volume Is Hibernated:

3:128  0:000      Check sleep image 'by signature':

3:158  0:029      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success

3:158  0:000      using default sleep image name = \private\var\vm\sleepimage

3:178  0:019      sleepimage not found -> Not Found

3:178  0:000      hibernated: no - sign

3:191  0:013  - [06]: 'Recovery HD'

3:192  0:000          AddLoaderEntry for Volume Name=Recovery HD

3:242  0:049  - [07]: 'HS'

3:278  0:036          AddLoaderEntry for Volume Name=HS

3:300  0:021      Check if volume Is Hibernated:

3:300  0:000      Check sleep image 'by signature':

3:342  0:042      using default sleep image name = \private\var\vm\sleepimage

3:353  0:011      sleepimage not found -> Not Found

3:353  0:000      hibernated: no - sign

3:367  0:013  - [08]: 'Recovery HD'

3:367  0:000          AddLoaderEntry for Volume Name=Recovery HD

3:409  0:042  === [ AddCustomTool ] =====================================

3:410  0:000  === [ GetEfiBootDeviceFromNvram ] =========================

3:410  0:000  Default boot entry not found

3:410  0:000  DefaultIndex=-1 and MainMenu.EntryCount=9

3:774  0:363  GUI ready

5:425  1:651  BootVariable of the entry is empty

5:425  0:000  === [ StartLoader ] =======================================

5:425  0:000  Finally: ExternalClock=333MHz BusSpeed=333295kHz CPUFreq=3000MHz PIS: hw.busfrequency=1332000000Hz

5:425  0:000  Loading boot.efi  status=Success

5:527  0:101  GetOSVersion: 10.12.6 (16G29)

5:527  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS

5:527  0:000  Filtering KextPatches:

5:527  0:000   - [00]: AppleHDA (t1-t1-110.9-10.12-AppleHDA/Realtek ALC885 (Optional)) :: BinPatch :: [OS: 10.12.6 | MatchOS: All | MatchBuild: All] ==> allowed

5:527  0:000   - [01]: AppleHDA (t1-110.9-10.12-AppleHDA/Realtek ALC885 (Optional)) :: BinPatch :: [OS: 10.12.6 | MatchOS: All | MatchBuild: All] ==> allowed

5:527  0:000   - [02]: AppleHDA (t1-AppleHDA/Resources/xml>zml) :: BinPatch :: [OS: 10.12.6 | MatchOS: All | MatchBuild: All] ==> allowed

5:527  0:000   - [03]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.12.6 | MatchOS: All | MatchBuild: All] ==> allowed

5:527  0:000   - [04]: AppleUSBXHCIPCI (change 15 port limit to 26 in XHCI kext (100-series)) :: BinPatch :: [OS: 10.12.6 | MatchOS: 10.12.x | MatchBuild: All] ==> allowed

5:527  0:000  Will not patch boot.efi

5:527  0:000  === [ PatchSmbios ] =======================================

5:527  0:000  insert table 9 for dev 0:0

5:527  0:000  insert table 9 for dev 0:1

5:527  0:000  insert table 9 for dev 0:0

5:527  0:000  insert table 9 for dev 7:0

5:527  0:000  Trusting SMBIOS...

5:527  0:000  Channels: 2

5:527  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23

5:527  0:000   partNum unknown

5:527  0:000  SMBIOS Type 17 Index = 0 => 0 0:

5:527  0:000  BANK 0 DIMM0 800MHz 2048MB

5:527  0:000   partNum unknown

5:527  0:000  SMBIOS Type 17 Index = 1 => 2 2:

5:527  0:000  BANK 1 DIMM0 800MHz 2048MB

5:527  0:000   partNum unknown

5:527  0:000  SMBIOS Type 17 Index = 2 => 1 1:

5:527  0:000  BANK 0 DIMM1 800MHz 2048MB

5:527  0:000   partNum unknown

5:527  0:000  SMBIOS Type 17 Index = 3 => 3 3:

5:527  0:000  BANK 1 DIMM1 800MHz 2048MB

5:527  0:000  mTotalSystemMemory = 8192

5:527  0:000  NumberOfMemoryDevices = 4

5:527  0:000  Type20[0]->End = 0x1FFFFF, Type17[0] = 0x800

5:527  0:000  Type20[1]->End = 0x3FFFFF, Type17[1] = 0x1800

5:527  0:000  Type20[2]->End = 0x5FFFFF, Type17[2] = 0x3000

5:527  0:000  Type20[3]->End = 0x7FFFFF, Type17[3] = 0x5000

5:527  0:000  === [ PatchACPI ] =========================================

5:527  0:000  RSDT 0xBFEE3040

5:527  0:000  FADT from RSDT: 0xBFEE30C0

5:527  0:000  Xsdt is not found! Creating new one

5:527  0:000  RsdPointer is Acpi 1.0 - creating new one Acpi 2.0

5:527  0:000  RsdPointer Acpi 2.0 installed

5:527  0:000  RSDT entries = 9

5:527  0:000  Xsdt reallocation done

5:527  0:000  old FADT length=74

5:527  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml

5:540  0:012  Apply DsdtFixMask=0x00008055

5:540  0:000     drop _DSM mask=0x0000

5:540  0:000  === [ FixBiosDsdt ] =======================================

5:540  0:000  VideoCard devID=0x665C1002

5:540  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0

5:540  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE

5:540  0:000  USBADR[1] = 0x1A0001 and PCIe = 0xFFFE

5:540  0:000  USBADR[2] = 0x1A0002 and PCIe = 0xFFFE

5:540  0:000  USBADR[3] = 0x1A0007 and PCIe = 0xFFFE

5:553  0:012  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)

5:553  0:000  USBADR[4] = 0x1C0000 and PCIe = 0x0

5:553  0:000  USBADR[5] = 0x1D0000 and PCIe = 0xFFFE

5:553  0:000  USBADR[6] = 0x1D0001 and PCIe = 0xFFFE

5:553  0:000  USBADR[7] = 0x1D0002 and PCIe = 0xFFFE

5:553  0:000  USBADR[8] = 0x1D0007 and PCIe = 0xFFFE

5:553  0:000  Patching DSDT:

5:553  0:000   - [Change EHC2 to EH02]: pattern 45484332, patched at: [ (58F) (32AF) ]

5:553  0:000   - [Change EHC1 to EH01]: pattern 45484331, patched at: [ (57D) (31EB) ]

5:553  0:000   - [change _OSI to XOSI]: pattern 5F4F5349, patched at: [ (2308) (3) ]

5:553  0:000   - [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!

5:553  0:000  first CPU found at 85 offset 88

5:553  0:000  score candidate at 81

5:553  0:000  score inserted in acpi_cpu_score _PR_

5:553  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 , within the score: _PR_

5:553  0:000  Found PCIROOTUID = 0

5:553  0:000  Start PIC Fix

5:553  0:000  PIC size=28 at 246B

5:553  0:000  Start HPET Fix

5:553  0:000  patch HDEF in DSDT 

5:553  0:000  Start HDA Fix

5:553  0:000  found HDA device NAME(_ADR,0x001B0000) And Name is HDEF

5:553  0:000  NewName HDEF already present, renaming impossible

5:553  0:000  _DSM already exists, patch HDA will not be applied

5:553  0:000  Start SHUTDOWN Fix len=4BD3

5:553  0:000  === [ ACPIDropTables ] ====================================

5:553  0:000  === [ ACPIPatchedAML ] ====================================

5:553  0:000  Unsorted

5:553  0:000  Inserting SSDT-HDMI-AMD-PEGP@1.aml from EFI\CLOVER\ACPI\patched ... Success

5:553  0:000  === [ PatchAllSSDT ] ======================================

5:553  0:000  Patch table: SSDT  Cpu0Cst len=0x18A

5:553  0:000  0. [Change EHC2 to EH02]: pattern 45484332, bin not found / already patched!

5:553  0:000  1. [Change EHC1 to EH01]: pattern 45484331, bin not found / already patched!

5:553  0:000  2. [change _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched!

5:553  0:000  3. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!

5:553  0:000  Patch table: SSDT  Cpu1Cst len=0x18A

5:553  0:000  0. [Change EHC2 to EH02]: pattern 45484332, bin not found / already patched!

5:553  0:000  1. [Change EHC1 to EH01]: pattern 45484331, bin not found / already patched!

5:553  0:000  2. [change _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched!

5:553  0:000  3. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!

5:553  0:000  Patch table: SSDT  Cpu2Cst len=0x18A

5:553  0:000  0. [Change EHC2 to EH02]: pattern 45484332, bin not found / already patched!

5:553  0:000  1. [Change EHC1 to EH01]: pattern 45484331, bin not found / already patched!

5:553  0:000  2. [change _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched!

5:553  0:000  3. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!

5:553  0:000  Patch table: SSDT  Cpu3Cst len=0x18A

5:553  0:000  0. [Change EHC2 to EH02]: pattern 45484332, bin not found / already patched!

5:553  0:000  1. [Change EHC1 to EH01]: pattern 45484331, bin not found / already patched!

5:553  0:000  2. [change _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched!

5:553  0:000  3. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!

5:553  0:000  Patch table: SSDT  CpuPm len=0x3AB

5:553  0:000  0. [Change EHC2 to EH02]: pattern 45484332, bin not found / already patched!

5:553  0:000  1. [Change EHC1 to EH01]: pattern 45484331, bin not found / already patched!

5:553  0:000  2. [change _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched!

5:553  0:000  3. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!

5:553  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0

5:553  0:000   Xsdt has tables count=10

5:553  0:000  CPUBase=0 and ApicCPUBase=0 ApicCPUNum=4

5:553  0:000  Drop tables from Xsdt, SIGN=APIC TableID= Length=0

5:553  0:000   Xsdt has tables count=10

5:553  0:000   Table: APIC  GBTUACPI  132 dropped

5:553  0:000  Found subtable in MADT: type=0

5:553  0:000  Found subtable in MADT: type=0

5:553  0:000  Found subtable in MADT: type=0

5:553  0:000  Found subtable in MADT: type=0

5:553  0:000  Found subtable in MADT: type=1

5:553  0:000  Found subtable in MADT: type=2

5:553  0:000  Found subtable in MADT: type=2

5:553  0:000  LocalApicNMI is already present, no patch needed

5:553  0:000  New APIC table successfully inserted

5:941  0:387  Patched APIC table saved into efi/clover/acpi/origin/APIC-p.aml 

5:941  0:000  === [ RestSetup macOS ] ===================================

5:941  0:000  EdidDiscovered size=128

5:941  0:000  ------- EDID Table

5:941  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  4C  2D

5:941  0:000  010  |  09  05  01  00  00  00  30  12  01  03

5:941  0:000  020  |  80  10  09  78  0A  EE  91  A3  54  4C

5:941  0:000  030  |  99  26  0F  50  54  BD  EF  80  71  4F

5:941  0:000  040  |  81  00  81  40  81  80  95  00  95  0F

5:941  0:000  050  |  B3  00  01  01  02  3A  80  18  71  38

5:941  0:000  060  |  2D  40  58  2C  45  00  A0  5A  00  00

5:941  0:000  070  |  00  1E  66  21  50  B0  51  00  1B  30

5:941  0:000  080  |  40  70  36  00  A0  5A  00  00  00  1E

5:941  0:000  090  |  00  00  00  FD  00  18  4B  1A  51  17

5:941  0:000  100  |  00  0A  20  20  20  20  20  20  00  00

5:941  0:000  110  |  00  FC  00  53  41  4D  53  55  4E  47

5:941  0:000  120  |  0A  20  20  20  20  20  01  6F

5:941  0:000  Framebuffer @0xC0000000  MMIO @0xD0000000 I/O Port @0x0000B000 ROM Addr @0x00000000

5:941  0:000  PCI region 1 = 0x00000000, region3 = 0x00000000, region5 = 0xE5000000

5:941  0:000  Use region5 as MMIO space

5:941  0:000  BIOS_0_SCRATCH=0x00000000, 1=0x00000000, 2=0x00000000, 3=0x00000000, 4=0x00000000, 5=0x00000000, 6=0x00000000

5:941  0:000  RADEON_CRTC2_GEN_CNTL == 0x00000000

5:941  0:000   card posted because CONFIG_MEMSIZE=0x400

5:941  0:000  ATI card POSTed, 

5:941  0:000  Set VRAM for Bonaire =1024Mb

5:941  0:000  ATI: get_vram_size returned 0x40000000

5:941  0:000  ATI Radeon EVERGREEN+ family

5:941  0:000  Users config name Vervet

5:941  0:000  (AtiPorts) Nr of ports set to: 5

5:941  0:000  ATI Bonaire AMD Radeon HD 7790 1024MB (Vervet) [1002:665C] (subsys [174B:E253]):: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)

5:941  0:000   setting specified layout-id=1 (0x1)

5:942  0:000  stringlength = 7378

5:942  0:000  CurrentMode: Width=1920 Height=1080

5:942  0:000  Beginning FSInjection

FSInjectionInstall ...

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BDDD3A18

FSInjectionInstall ...

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BDDD3A18

5:942  0:000  Use origin smbios table type 1 guid.

5:943  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other

5:943  0:000  Extra kext: EFI\CLOVER\kexts\Other\RT2870USBWirelessDriver.kext

6:100  0:156  Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext

6:168  0:067  Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext

6:195  0:027  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext

6:240  0:045    |-- PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\ACPISensors.kext

6:256  0:015    |-- PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\CPUSensors.kext

6:271  0:014    |-- PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\GPUSensors.kext

6:303  0:032    |-- PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\LPCSensors.kext

6:359  0:056  Extra kext: EFI\CLOVER\kexts\Other\USBInjectAll.kext

6:608  0:248  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext

6:626  0:017  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext

6:698  0:072    |-- PlugIn kext: EFI\CLOVER\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext

6:884  0:186  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12

6:890  0:005  Custom boot is disabled

 

 

Share this post


Link to post
Share on other sites

@Slice

 

Thank you for the prevous Answer (with the cpuid inject thing), that solved my problem :-)

 

I have another one...

I want to get aptiofix working...

 

I just forgot, how to debug it...

Last time ive dumped the memory mappings was ~4 years ago...

 

Maybe you can Point my Nose to the right direction :-)

 

I dont want to waste your time.

 

Cheers :-)

 

EDIT:

Just the Specs (In case if its already fixed in a future clover version)

Asus X299 R6E + 7900x + 64GB Ram

 

Cheers :-)

Share this post


Link to post
Share on other sites

4289 is booting in verbose mode rather than with the Apple logo/progress bar - is this a change or do I need to set something?

 

Cheers!

Share this post


Link to post
Share on other sites

Guys I am getting this error when I click to update;

 

attachicon.gifScreen Shot 2017-11-03 at 13.35.54.png

attachicon.gifScreen Shot 2017-11-03 at 13.34.26.png

CloverUpdater was not changed since 4000 when it changes 2.3 -> 2.4.

Did you check any other 4xxx revision?

@Slice

 

Thank you for the prevous Answer (with the cpuid inject thing), that solved my problem :-)

 

I have another one...

I want to get aptiofix working...

 

I just forgot, how to debug it...

Last time ive dumped the memory mappings was ~4 years ago...

 

Maybe you can Point my Nose to the right direction :-)

 

I dont want to waste your time.

 

Cheers :-)

 

EDIT:

Just the Specs (In case if its already fixed in a future clover version)

Asus X299 R6E + 7900x + 64GB Ram

 

Cheers :-)

Change AptioFix AptioFix2 or vice versa.

4289 is booting in verbose mode rather than with the Apple logo/progress bar - is this a change or do I need to set something?

 

Cheers!

Remove "-v" from boot-args. 

Remove nvram.plist from EFI partition and from Mac root partition.

Share this post


Link to post
Share on other sites

Guys I am getting this error when I click to update;

 

attachicon.gifScreen Shot 2017-11-03 at 13.35.54.png

attachicon.gifScreen Shot 2017-11-03 at 13.34.26.png

the updater looks for a file like this: 

http://sourceforge.net/projects/cloverefiboot/files/Installer/Clover_v2.4k_r${last_revision}.zip/download

but the latest 4289 zip on SourceForge is not named properly: Clover_v2.4k_r4289.pkg.zip

Share this post


Link to post
Share on other sites

the updater looks for a file like this: 

http://sourceforge.net/projects/cloverefiboot/files/Installer/Clover_v2.4k_r${last_revision}.zip/download

but the latest 4289 zip on SourceForge is not named properly: Clover_v2.4k_r4289.pkg.zip

 

Probably that file was made manually, because the buildpkg.sh script still generates the name without that ".pkg".

Yes, it was. Will be corrected.

Share this post


Link to post
Share on other sites
Slice, Rehabman

Thank you for clover r4289. 

i like "fix menu navigation with regard to space/enter/esc" commit. clover had this issue for long time

i tested legacy and UEFI 10.6.8~10.13.2 beta1.

good works. thank you so much again.

 

@Rehabman

no more use stereo->mono adaptor in probook 4x30s.

line-in is working now without adaptor. i tested it from 10.6.8 to 10.13.2 beta1.

now probook 4x30s is perfect. no more exist issues.

here is file

thanks to insanelydeepak.

Share this post


Link to post
Share on other sites

@Rehabman

no more use stereo->mono adaptor in probook 4x30s.

line-in is working now without adaptor. i tested it from 10.6.8 to 10.13.2 beta1.

now probook 4x30s is perfect. no more exist issues.

here is file

thanks to insanelydeepak.

Please post complete details in the ProBook guide thread on tmx.

Share this post


Link to post
Share on other sites

hi guys,

I don't know if this is the right thread, but my question is related with clover, I have not succeed in updating clover the last version is 4239, and yesterday I tried to update clover and the program works and all is installed, but in boot the clover is the same, 4239, anyone knows why?

Thanks in advance 

 

PS: But the install log says 4268, I don't know why this occurs...

Clover_Install_Log.txt

Share this post


Link to post
Share on other sites

hi guys,

I don't know if this is the right thread, but my question is related with clover, I have not succeed in updating clover the last version is 4239, and yesterday I tried to update clover and the program works and all is installed, but in boot the clover is the same, 4239, anyone knows why?

Thanks in advance 

 

PS: But the install log says 4268, I don't know why this occurs...

 

Most likely there's another Clover installation somewhere on (one of) your disks

Share this post


Link to post
Share on other sites

Hi ricoc90,

I only have one other HDD named Time machine and formatted GUID, but don't have clover I think, what should I do?

The update of clover for me is purely cosmetic, until I changed the theme, all the rest all works as it should...

Thanks

Share this post


Link to post
Share on other sites

Line 405 in /edk2/Clover/rEFIt_UEFI/Platform/platformdata.c

 

- "iMac17,1", "1.0", "C02QFHACGG7L", "iMac-Aluminum",

+ "iMac", "1.0", "C02QFHACGG7L", "iMac-Aluminum",

Share this post


Link to post
Share on other sites

I have the same issue when it comes to no buildversion detection for macOS (update) installer as well as empty kext inject management, as reported here

(Issue persists in r4278)

 

Can confirm this still happens for App Store upgrade to 10.13.2_17C60c and Clover r4289.  Clover incorrectly identifies "macOS Install Data" as 10.12 instead of 10.13.2...

22:480  0:000  Loading boot.efi  status=Success
22:898  0:418  GetOSVersion: 10.12

It seems the code does not parse "/macOS Install Data/Locked Files/Boot Files/SystemVersion.plist"?

post-846696-0-46169600-1509746013_thumb.png

 

Practically speaking, this means FakeSMC must be placed in Clover/Kexts/Other instead of 10.13, otherwise upgrade will fail.  Also any conditional kext patching in your config.plist eg @SunKi's AppleAHCIPort.kext patch for 10.13 should be made unconditional, otherwise it won't be applied during the update...

22:899  0:000  Filtering KextPatches:
22:899  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
22:899  0:000   - [01]: AppleAHCIPort (fix IO error ICH10 for 10.13, credit SunKi) :: BinPatch :: [OS: 10.12 | MatchOS: 10.13.x | MatchBuild: All] ==> not allowed
22:899  0:000   - [02]: AppleAHCIPort (fix hotplug ICH10 for 10.13, credit SunKi) :: BinPatch :: [OS: 10.12 | MatchOS: 10.13.x | MatchBuild: All] ==> not allowed

Note:  The final, installed system is detected without problems...

 

 

1:358  0:000  Starting Clover revision: 4289 on CLOVER EFI
1:358  0:000  Build with: [Args: -x64 -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_APPLE_HFSPLUS_DRIVER -t XCODE5 | -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.6 | XCODE: 9.1]
...
24:496  0:000  Loading boot.efi  status=Success
24:935  0:439  GetOSVersion: 10.13.2 (17C60c)
24:935  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_KERNEL_DEBUGGER | CSR_ALLOW_APPLE_INTERNAL | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_ALLOW_ANY_RECOVERY_
24:935  0:000  Filtering KextPatches:
24:935  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed
24:935  0:000   - [01]: AppleAHCIPort (fix IO error ICH10 for 10.13, credit SunKi) :: BinPatch :: [OS: 10.13.2 | MatchOS: 10.13.x | MatchBuild: All] ==> allowed
24:935  0:000   - [02]: AppleAHCIPort (fix hotplug ICH10 for 10.13, credit SunKi) :: BinPatch :: [OS: 10.13.2 | MatchOS: 10.13.x | MatchBuild: All] ==> allowed

 

 

preboot_r4289.log.zip

Share this post


Link to post
Share on other sites

r4291 boots 10.13.2 Beta (17C60c) fine on my legacy mach, thanks.  :)

 

 

 

.....  .....  ...
2:734  0:000  Now is 3.11.2017,  22:18:49 (GMT)
2:734  0:000  Starting Clover revision: 4291 on CLOVER EFI
2:734  0:000  Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.11.6 | XCODE: 8.2]
......  .....  ...
20:805  0:000  Loading boot.efi  status=Success
20:929  0:123  GetOSVersion: 10.13.2 (17C60c)
......  .....  ...
20:956  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
20:956  0:000  Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext
20:990  0:034  Extra kext: EFI\CLOVER\kexts\Other\ApplePS2SmartTouchPad.kext
21:027  0:036    |-- PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Keyboard.kext
21:039  0:012    |-- PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Controller.kext
21:048  0:009  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.13
21:048  0:000  Extra kext: EFI\CLOVER\kexts\10.13\VoodooBatterySMC.kext
21:083  0:034  Extra kext: EFI\CLOVER\kexts\10.13\FakeSMC.kext
21:096  0:013  Extra kext: EFI\CLOVER\kexts\10.13\IOath3kfrmwr.kext
21:118  0:021  Extra kext: EFI\CLOVER\kexts\10.13\EFICheckDisabler.kext
21:153  0:034  Extra kext: EFI\CLOVER\kexts\10.13\AppleALC.kext
21:178  0:025    |-- PlugIn kext: EFI\CLOVER\kexts\10.13\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
21:437  0:259  Extra kext: EFI\CLOVER\kexts\10.13\CodecCommander.kext
21:504  0:066  Extra kext: EFI\CLOVER\kexts\10.13\CalDigitUSBxHCI.kext
21:521  0:017  Extra kext: EFI\CLOVER\kexts\10.13\CalDigitFastIO.kext
21:550  0:028  Extra kext: EFI\CLOVER\kexts\10.13\AsusNBFnKeys.kext
21:575  0:025  Extra kext: EFI\CLOVER\kexts\10.13\AsusACPIBackLightPanel.kext
21:595  0:019  Extra kext: EFI\CLOVER\kexts\10.13\Lilu.kext
21:614  0:018  SetStartupDiskVolume:
21:614  0:000    * Volume: 'macOS High Sierra'
......  .....  ... 

 

 

bootlog.log.txt_a43sj_r4291.zip

Share this post


Link to post
Share on other sites

Line 405 in /edk2/Clover/rEFIt_UEFI/Platform/platformdata.c

 

- "iMac17,1", "1.0", "C02QFHACGG7L", "iMac-Aluminum",

+ "iMac", "1.0", "C02QFHACGG7L", "iMac-Aluminum",

 

I think this was discussed a while back.  It (mac family) may be that way with the iMac17,1.

Someone should double check on an actual Mac.

Share this post


Link to post
Share on other sites

You can download a IOReg dump from iMac17,1 from here. Search for the "SMBIOS" property (located under AppleSMBIOS). The current family name (iMac17,1) appears to be correct:

Handle 0x0010, DMI type 1, 27 bytes
System Information
	Manufacturer: Apple Inc.
	Product Name: iMac17,1
	Version: 1.0
	Serial Number: C02QH7CZGG7L
	UUID: C35553FC-643B-6152-ACCD-6063A5220F56
	Wake-up Type: Power Switch
	SKU Number:
	Family: iMac17,1

Share this post


Link to post
Share on other sites

You can download a IOReg dump from iMac17,1 from here. Search for the "SMBIOS" property (located under AppleSMBIOS). The current family name (iMac17,1) appears to be correct:

Handle 0x0010, DMI type 1, 27 bytes
System Information
	Manufacturer: Apple Inc.
	Product Name: iMac17,1
	Version: 1.0
	Serial Number: C02QH7CZGG7L
	UUID: C35553FC-643B-6152-ACCD-6063A5220F56
	Wake-up Type: Power Switch
	SKU Number:
	Family: iMac17,1

 

Interesting. Is that the lone exception to the usual pattern?

Share this post


Link to post
Share on other sites

Can confirm this still happens for App Store upgrade to 10.13.2_17C60c and Clover r4289.  Clover incorrectly identifies "macOS Install Data" as 10.12 instead of 10.13.2...

22:480  0:000  Loading boot.efi  status=Success
22:898  0:418  GetOSVersion: 10.12

It seems the code does not parse "/macOS Install Data/Locked Files/Boot Files/SystemVersion.plist"?

attachicon.gifmacOS Install Data.png

 

Practically speaking, this means FakeSMC must be placed in Clover/Kexts/Other instead of 10.13, otherwise upgrade will fail.  Also any conditional kext patching in your config.plist eg @SunKi's AppleAHCIPort.kext patch for 10.13 should be made unconditional, otherwise it won't be applied during the update...

22:899  0:000  Filtering KextPatches:
22:899  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
22:899  0:000   - [01]: AppleAHCIPort (fix IO error ICH10 for 10.13, credit SunKi) :: BinPatch :: [OS: 10.12 | MatchOS: 10.13.x | MatchBuild: All] ==> not allowed
22:899  0:000   - [02]: AppleAHCIPort (fix hotplug ICH10 for 10.13, credit SunKi) :: BinPatch :: [OS: 10.12 | MatchOS: 10.13.x | MatchBuild: All] ==> not allowed

Note:  The final, installed system is detected without problems...

 

 

1:358  0:000  Starting Clover revision: 4289 on CLOVER EFI
1:358  0:000  Build with: [Args: -x64 -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_APPLE_HFSPLUS_DRIVER -t XCODE5 | -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.6 | XCODE: 9.1]
...
24:496  0:000  Loading boot.efi  status=Success
24:935  0:439  GetOSVersion: 10.13.2 (17C60c)
24:935  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_KERNEL_DEBUGGER | CSR_ALLOW_APPLE_INTERNAL | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_ALLOW_ANY_RECOVERY_
24:935  0:000  Filtering KextPatches:
24:935  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed
24:935  0:000   - [01]: AppleAHCIPort (fix IO error ICH10 for 10.13, credit SunKi) :: BinPatch :: [OS: 10.13.2 | MatchOS: 10.13.x | MatchBuild: All] ==> allowed
24:935  0:000   - [02]: AppleAHCIPort (fix hotplug ICH10 for 10.13, credit SunKi) :: BinPatch :: [OS: 10.13.2 | MatchOS: 10.13.x | MatchBuild: All] ==> allowed

 

 

Very good description, I've exactly same issue   :) On my system, Block inject don't show any folder so I can't disabled kext. Fakesmc is in Other Folder and @SunKi's AppleAHCIPort.kext patch for 10.13 is unconditional.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By DarkHarthur
      DH67CL
      R7 250
      2 discos duros
      En el 1: Windows 10 y una partición de datos
      En el 2: High Sierra y una particion de datos
       
      Hola, mi problema es el siguiente Clover ya no me muestra EFI Windows; Tenia todo funcionando bien con High Sierra 10.13.6, quise actualizar a Mojave y como tuve muchos problemas decidí volver a High Sierra con el disco duro USB en el que había hecho una copia con Carbon Copy;
      La situacion es algo así, en la carpeta EFI si dejo la carpeta Microsoft, al encender la PC entra directo a Windows, si elimino la carpeta Microsoft si entra con Clover pero no aparece la entrada EFI Windows, ya active legacy en Clover Configurator pero solo me aparecen otras entradas de Windows pero no EFI, todo esto desde el disco duro supuestamente restaurado a como lo tenia antes.
      Si entro con el disco duro USB que tiene la copia que había hecho, me aparecen todas las opciones.
      Si conecto un pendrive tampoco me aparece la opción EFI Windows. 
      Probablemente paso después de desconectar el disco duro de Windows, pero recuerdo que me seguía apareciendo EFI Windows después de haberlo desconectado. Saludos
    • By gengik84
      Ciro82==>>Thanks
      Uno dei tre Requisiti:
      Hack funzionante Mac vero Macchina virtuale Impostazioni Bios per il boot:
      Cercate una voce  del tipo “Sata Mode”e settatela  in AHCI
      Secure Boot: disabilitare o altri sistemi operativi
      CSM: UEFI o LEGACY, oppure a secondo del tipo di installazione
      VT-x / VT-d disable
      *Nota: Secure boot e csm valido solo per bios UEFI
      Materiale Occorrente 
      "OS X (Versione App.Store)”
      USB 8GB  *nota: nel caso di usb superiori dovrà essere partizionata, in modo da avere una partizione su cui "lavoreremo,di questa dimensione
      ShowAllfiles 
      kext Wizard 
      Bootloader Clover_2.3k_r xxx:                   http: //sourceforge.n.../cloverefiboot/
      Clover Configurator:                                    http: //mackie100proj...a.org/download/
      FakeSmc.kext:                                            https://github.com/kozlek/HWSensors/releases
      In allegato,a fondo pagina troverete un "pacchetto" contenente : ShowAllfiles, Kext Wizard, FakeSmc.kext: 
      App alternative:
      ESP Mounter Pro: per montare la partizione EFI
      Vi illustrerò tre metodi per creare la usb, ma sono ben distinti… quindi usatene soltanto uno
      Metodo 1: “Install Mac_OS_X.command” Metodo 2: “Create Install Media di Apple” Metodo 3:  Metodo Manuale Alla fine delle preparazione dell’installer, tutti i metodi necessitano l’installazione del Bootloader Clover sulla a vostra USB.
      “CONDIZIONI OBBLIGATORIE”
      PUNTO 1: che la vostra usb sia stata preventivamente nominata USB (caratteri maiuscoli) Tabella di partizione GUID e la formattazione in  Mac esteso Journaled.
      PUNTO 2: che l’installer di OSX si trovi in Applicazioni
      Utility Disco 
      Selezionate la pendrive, andate su “partizione”, selezionate “1 partizione”, impostate Mac OS esteso journaled e date il nome USB, poi in basso cliccate su opzioni e scegliete Tabella partizione (GUID), poi “applica”.
      Immagine 
      Riporto nuovamente l’operazione sopra citata adoperando dal nuovo Utility Disco introdotto su El Capitan.
      Rimane ovviamente invariato nome della usb in ==>> USB (maiuscolo), la formattazione in Mac esteso Journaled e sia la mappa partizione in GUID
      Da utility disco selezionate la usb, cliccate su inizializza.
      dal menù a tendina scegliete la relative impostazioni
      Immagine  
      Procedura effettua da High Sierra è la stessa della precedente, l'unica attenzione e operazione da aggiungere in primis  è cliccare nel menù a tendina in alto sulla sinistra di utility disco e selezionare "mostra tutti i dispositivi"
      Immagine 
       
      =====================
        METODO 1: "Install_Mac_OS_X.Command" Lo script che trovate allegato in fondo alla guida permette la creazione dell’installer in maniera automatica
      Include la possibilità di scelta di tre versioni di osx
      Yosemite El Capitan Sierra Il risultato finale è come quello del metodo "manuale" descritto nella guida, per cui l'installazione avverrà in un solo passaggio, non in due come con il metodo createinstallmedia. 
      Offre inoltre la possibilità di inserire un kernel patchato, utile, per esempio, per chi usa AMD.
      Rimane invariato il nome dato alla usb in USB, mappa partizione e tipo di formattazione
      Se la vostra usb non sarà rinominata nel modo corretto, verrete avvisati dal terminale, quindi non dovrete far altro che apportare la relativa modifica e rilanciare nuovamente lo script
      Esempio
      ===========================
      Metodo 2 
      L'intento è quello di usare la procedura fornitaci direttamente da Apple, "createinstallmedia", introdotta  con Mavericks. 
      Tale metodo prevede l’uso del terminale che via via se ne sta perdendo il “valore e l’uso”
      Inizialmente per i neofiti potrà sembrare problematico ma alla fine non è così.
      Durante il post installazione alcune operazioni ne richiedono l’ uso.
      Perciò mi sono chiesto perchè, qualora uno volesse, non far conoscere da subito un po’ questo “strumento”???
      Per favorirvi vi ho allegato i comandi già  “pronti”, i quali li potrete copiare ed incollare sul terminale.
      A questo punto aprite il terminale, copiate ed incollate il comando sottostante e premete invio, digitate la vostra password e premete nuovamente invio.
      Comando per creare USB con Yosemite:
      sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction  
      Comando per creare USB con El Capitan
      sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app --nointeraction Comando per creare USB con Sierra 
      sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app/ --nointeraction Per creare USB con Hight Sierra o Mojave usate --> C_I_M (aggiornato per 10.14)
       
      Funziona con il drag & drop sul terminale, in questo caso non vi è necessità che la usb sia nominata in un determinato modo ed essendo basato su create install media ovviamente funziona da 10.9 a 10.14.... 
      BENE…IL PROCESSO DI CREAZIONE E’ INIZIATO…
      AVREMO CIRCA 20/30 MINUTI DI TEMPO LIBERO A CUI DEDICARSI A CIO’ CHE VOGLIAMO………………………………………..  
      COLGO L’OCCASIONE PER FARVI NOTARE LA VELOCITA’ E LA SICUREZZA DI QUESTO METODO
      CONFRONTATE QUESTO CON IL TERZO METODO E NOTERETE CHE CON UN SOLO PASSAGGIO, OSSIA IL COMANDO DATO AL TERMINALE, FACCIAMO IN UNA SINGOLA OPERAZIONE TUTTI I VARI STEP DESCRITTI SULL’ ALTRO METODO.
      DETTO QUESTO, MOLTO IMPORTANTE E’ SOTTOLINEARE CHE COSI’ FACENDO EVITEREMO ERRORI  DI DISTRAZIONE RIGUARDO AI PASSAGGI O FRAINTENDIMENTI.
      Immagine 
      Potete adesso passare ad installare il bootloader Clover sulla vostra usb.
      *NOTA*:
      Avendo usato questo metodo l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      =========================
      METODO "MANUALE"....  (lascio per futura memoria-Compatibile fino a 10.12)
      ==========================
      Bootloader
      **Nota:** Installazione in UEFI  dipenderà dalla scheda madre in vostro possesso, quindi se non supporta tale opzione , il bootloader dovrà essere installato in  modalità Legacy.
       Vi invito, qualora non sapeste questa informazione, a recarvi nel sito ufficiale del produttore e controllare le informazioni a riguardo
      Fatto questo dobbiamo installare  Clover sulla usb.
      A seconda del tipo di Bios o al tipo di installazione che vogliamo fare UEFI o Legacy avremo ovviamente configurazioni diverse in questa fase.
      Lanciate il pkg.
      Immagine 

       
      Cambiate la destinazione di installazione ad USB oppure Install Mac_OS_X (a secondo del tipo di creazione eseguita)
      Successivamente clicchiamo su "Ad Hoc"
      Per Installazione UEFI
      Mettete i flag   : Installazione solo per avvio UEFI
                               : installare Clover nella ESP
                               : Driver64UEFI  selezionate OsxAptioFixDrv-64
                             *  :Se nel vostro sistema è presente una scheda grafica (discreta) della serie 9xx nVidia selezionate OsxAptioFix2Drv-64 al posto di  OsxAptioFixDrv-64 *
      ** OsxAptioFix2Drv :E' necessario per poter impostare CsrActiveConfig= 0x3 **
      ***OsxAptioFix3Drv oppure AptioMemory --> (consigliato) devono essere usati su hardware Skylake o successivi perché permettono alla nvram di lavorare correttamente
           (mi raccomando o uno o l'altro)
      Proseguite con l’installazione.
      Immagine 
      ** Ricordate che avrete accesso a questa cartella dopo aver montato la partizione EFI**
      ===========================
      Per installazione Legacy
      Immagine 
      ===========================
      Impostazione per config.plist:
      Con clover configurator “montate” la partizione EFI della usb.
      1) Per fare questo nel menù di sinistra, cliccate su “Mount EFI”
      2) individuate la partizione relativa alla vostra usb, a questo punto montiamo la relativa partizione EFI  selezionando l’apposito pulsante “Mount Partition”
      Immagine 
      3) Successivamente cliccate su “Open Partition”.. recatevi in EFI/Clover ed aprite il config.plist
      4) Sezione ACPI: Disabilitate tutti i fix sia del menù 1 che del menù 2
      Immagine 
      5) Sezione BOOT: Sole se si sta installando Yosemite mettete il flag su kext-dev-mode=1
      Immagine 
      6) Sezione RT Variables: Se si sta installando El Capitan oppure Sierra, aggiungere i valori: BooterConfig= 0x28, CsrActiveConfig= 0x67
      Immagine 
      7) Sezione System Parameters: Su inject kext mettete YES
      Immagine 
      ===========================
      Nota: Su El Capitan, è stato introdotto SIP (System Integrity Protection)
      Info:
      ===========================
      Recatevi in EFI/Clover/kext/10.x 
      X= alla versione di osx che state installando. Per esempio se installerete Yosemite dovrete recarvi nella cartella 10.10, con El Capitan in 10.11….ecc
      Se non ci fosse tale cartella, createla e nominatela voi a “modo”.
      Copiatevi all’interno FakeSmc.kext
      *Nota se venite già da altre vostre configurazioni, oltre kext sopra citato ,potete mettere gli altri necessari per il vostro hardware
      Stessa cosa se avete DSDT e/o SSDT potete copiarli in EFI/Clover/Acpi/Patched
      Immagine 
      
      Per High Sierra:
      Scaricare il driver apfs.efi a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
       
      Per chi volesse continuare ad usare HFS vi rimando a questo post:
        Come installare High Sierra in HFS direttamente dalla usb  
      Utenti Laptop:  Nel 99% è obbligatorio disattivare la grafica discreta Nvidia/Amd per installare questo nuovo osx
                                     Quindi aggiungete --> SSDT-Disable_DGPU.aml.zip
                                     in EFI/Clover/acpi/Patched della usb
      --------------------------------------------------------------------
      Per Mojave:
      Scaricare il driver apfs.efi per 10.14 a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
      Versione di clover non antecedente a V_4015
      Volete usare HFS?
      E' possibile fare un installazione diretta su altro disco o partizione, nel caso può essere usato anche per effettuare aggiornamenti...
      nel caso guardate...
       Mojave in HFS 
       
       
       
      Fatto questo avrete la vostra USB bootable per installare OSX.
      ………Non scordatevi Fakesmc.kext da mettere nella relativa cartella…. senza il quale non farete mai il Boot......
      *NOTA: se usato il terminale per la creazione della usb, l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      **NOTA** Se avete processori Broadwell,Skylake o Kabylake...usate FakeSmc.kext e relativi sensors che trovate all'interno del secondo pacchetto.. (potete usarlo anche sui precedenti senza problemi, essendo una versione più aggiornata ha ulteriore supporto per le cpu più recenti)
      Update: Fakesmc e sensors versione 6.26
      Post installazione... post #2           
       Buon Hack….. 
      Aggiornamento:Install_Mac_OS_X.command.zip (compatibile da 10.10 a 10.12)
      le info le trovate a questo post
      Ringrazio @Ciro82 che mi ha aiutato nel preparare questa guida.
      Pacchetto.zip
      Pacchetto-2.zip
      apfs.efi-10.13-NoLog.zip
      Pacchetto-Fake+Sensors 6.26.1440.zip
      apfs.efi-10.13.1-No_LOG.zip
      apfs.efi-10.13.2_No_Log.zip
      apfs.efi-10.13.3-No_Log.zip
      apfs.efi-10.13.4-No_Log.zip
      apfs.efi-10.13.5_No_Log.zip
      C_I_M.zip
       
      apfs.efi-10.14-beta1_No_Log.zip






    • By warty
      On 8/20/2018 at 5:22PM, TessereKt said:
       
      On 8/21/2018 at 7:34AM, insanelyDeepak said:
       
      @insanelyDeepak, I would like to try cloverHDA, but I need help understanding how to use it.
       
      I have an Asus laptop that uses Realtek ALC295.
       
      My questions with regard to using cloverHDA:
      1.  I am running High Sierra (10.13.6). Is cloverHDA directly compatible? If not, can it easily be made compatible with adjustments I can apply?
       
      2.  What needs to be done with the original AppleHDA.kext that is already present in /S/L/E? Should it be left alone? Should it be removed? If it is removed, does the AppleHDA.kext that comes with cloverHDA, for example /Vanilla AppleHDA/Mac OS Sierra 10.12.6/AppleHDA.kext, need to be installed in its place?
       
      3.  In the 21 aug 18 reply to TessereKt, you mentioned "there is ALCPluxfix must install this." I noticed that there is a directory for alc_fix in one ALC295 directory (the ALC295_v2 Asus UX430UA directory) but not in the other ALC 295 directory that is provided (the ALC295/3254 directory). In which situation(s) is ALCPlugFix required?
       
      4.  My pathmaps are somewhat different from those in the cloverHDA.kext. Is there an easy way for me to customize the kext? For example, if I just switch the values in the xml files, will that be enough? Or does the whole thing then need to be recompiled?
       
      needed pathmaps:
      33-2
      23-3
      7-36-18
      9-34-19
       
      (My highest priority for the moment is getting headphone working, which is 33-2, and I might even be able to use the 33-3 that is already included. But I would like to eventually get all of them working.)
       
       
    • By C0nvert
      EFI Clover zip: https://aster-cloud.de/nextcloud/index.php/s/TjXg3qs2ydRTmS9
×