Jump to content
ErmaC

Clover General discussion

19,684 posts in this topic

Recommended Posts

Hi

any chance to update auto SMBIOS for iMac14,2?

Latest bios version is:

IM142.88Z.0118.B13.1602221716

obviously the date should be:

02/22/2016

 

it will prevent the firmware update constantly downloaded to EFI partition

 

Thank you

Share this post


Link to post
Share on other sites
Advertisement

Hi

any chance to update auto SMBIOS for iMac14,2?

Latest bios version is:

IM142.88Z.0118.B13.1602221716

obviously the date should be:

02/22/2016

 

it will prevent the firmware update constantly downloaded to EFI partition

 

Thank you

OK, I will commit all such updates. Thanks!

They also appear to update my Firmware.scap this morning silently (same with /usr/standalone/i386/Firmware.scap). Changed to MP61.88Z.0116.B17.1602221600 & see what happen

These values should not be arbitrary imho.

Share this post


Link to post
Share on other sites

Hey guys, been struggling with this. I changed my both systems to skylake mobos. Somehow, in both cases, I cannot charge my iphone via the Mac wired keyboard. I used to but I cannot any more.

Odd thing is that it charges when the system did not load yet. Then, when the load its half way it stops charging.

I'm using usbinjectall.kext by the way.

Notes:

I'm using a vanilla dsdt.aml file (made one for this case, asus z170m-plus does not need dsdt fixes) but does not effect. Tried the HighCurrent value. Tried the FixUSB value. Tried the Add ClockID. Just for the sake of it swaped XHCI to enable/disabled too.

 

Thanks for any insight. 

Share this post


Link to post
Share on other sites

Hey guys, been struggling with this. I changed my both systems to skylake mobos. Somehow, in both cases, I cannot charge my iphone via the Mac wired keyboard. I used to but I cannot any more.

Odd thing is that it charges when the system did not load yet. Then, when the load its half way it stops charging.

I'm using usbinjectall.kext by the way.

Notes:

I'm using a vanilla dsdt.aml file (made one for this case, asus z170m-plus does not need dsdt fixes) but does not effect. Tried the HighCurrent value. Tried the FixUSB value. Tried the Add ClockID. Just for the sake of it swaped XHCI to enable/disabled too.

 

Thanks for any insight.

It would be nice to see the boot log and the config.

Tip: remove the serial number & the mlb before sharing it publicly.

 

Just to clarify, you're trying to charge your phone via a keyboard?

 

Best regards. ?

Share this post


Link to post
Share on other sites

It would be nice to see the boot log and the config.

Tip: remove the serial number & the mlb before sharing it publicly.

 

Just to clarify, you're trying to charge your phone via a keyboard?

 

Best regards.

Exactly. The iphone is plugged to the keyboard.

0:100  0:100  MemLog inited, TSC freq: 4008557250
0:100  0:000  MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100  0:000  
0:100  0:000  Now is 9.4.2016,  20:5:11 (GMT+2047)
0:100  0:000  Starting Clover rev 3388 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,7D36F89B-586C-431F-83CD-D892080B86B3,0x28,0x64000) @CBB56818
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 2400MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 DIMM_A1
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 DIMM_A2
0:100  0:000  Type 17 Index = 2
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 DIMM_B1
0:100  0:000  Type 17 Index = 3
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 DIMM_B2
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 3388  running on System Product Name
0:100  0:000  ... with board Z170M-PLUS
0:100  0:000  CPU Vendor = 756E6547 Model=506E3
0:100  0:000  got cores from CPUID_1 = 0
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz
0:100  0:000   TSC/CCC Information Leaf:
0:100  0:000    numerator     : 334
0:100  0:000    denominator   : 2
0:100  0:000   Calibrated ARTFrequency: 24003336
0:100  0:000  MSR 0xE2 before patch 1E000000
0:100  0:000  MSR 0xE4              00031814
0:100  0:000  MSR 0xCE              00080838_F1012800
0:100  0:000  non-usable FLEX_RATIO = F0000
0:100  0:000  corrected FLEX_RATIO = E0000
0:100  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 40.0/8
0:100  0:000  Turbo: 40/40/40/42
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 8
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 4000 MHz
0:100  0:000  TSC: 4000 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  PCI (00|00:00.00) : 8086 191F class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 1901 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 1187 class=030000
0:100  0:000  Found NVidia model=EVGA GeForce GTX 760
0:100  0:000  PCI (00|01:00.01) : 10DE 0E0A class=040300
0:100  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:100  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:100  0:000  PCI (00|00:1B.00) : 8086 A167 class=060400
0:100  0:000  PCI (00|00:1C.00) : 8086 A110 class=060400
0:100  0:000  PCI (00|00:1D.00) : 8086 A118 class=060400
0:100  0:000  PCI (00|00:1F.00) : 8086 A145 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:100  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:100  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : 8086 15B8 class=020000
0:100  0:000  LAN 0, Vendor=8086, MMIO=F7100000
0:100  0:000  Clover load options size = 0 bytes
0:106  0:005  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:106  0:000  EFI\CLOVER\config.plist loaded: Success
0:107  0:001  Found theme directory: bootcamp
0:108  0:000  Found theme directory: embedded
0:108  0:000  Found theme directory: random
0:108  0:000  Loading early settings
0:108  0:000  timeout set to 2
0:108  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:108  0:000  KextsToPatch: 6 requested
0:108  0:000  KextsToPatch 0: AppleGraphicsDevicePolicy (AppleGraphicsDevicePolicy (board-id) Patch (c) 				Pike R. Alpha) Kext bin patch, data len: 8
0:108  0:000  KextsToPatch 1: AppleUSBXHCIPCI (change 15 port limit to 30) Kext bin patch, data len: 7
0:108  0:000  KextsToPatch 2: AppleHDA (t1-10.9-10.11-AppleHDA/Realtek ALC887) Kext bin patch, data len: 4
0:108  0:000  KextsToPatch 3: AppleHDA (t1-AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:108  0:000  KextsToPatch 4: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:108  0:000  KextsToPatch 5: AppleHDA (t1-10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
0:108  0:000  Default theme: embedded
0:108  0:000  Hiding entries with string BOOTX64.EFI
0:108  0:000  Hiding entries with string Windows
0:108  0:000  LoadDrivers() start
0:108  0:000  Loading FSInject-64.efi  status=Success
0:110  0:001  Loading HFSPlus.efi  status=Success
0:110  0:000   - driver needs connecting
0:110  0:000  Loading OsxAptioFix2Drv-64.efi  status=Success
0:110  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:110  0:000  1 drivers needs connecting ...
0:110  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:110  0:000  HFS+ driver loaded 
0:110  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:299  0:188  LoadDrivers() end
0:299  0:000  Dump SMC keys from NVRAM:
0:306  0:007  SetMaxResolution: found best mode 0: 2560x1080
0:321  0:015  Video mode change to mode #0: Success
0:321  0:000   - set
0:321  0:000  Console modes reported: 4, available modes:
0:321  0:000    Mode 1: 80x25 (current mode)
0:321  0:000    Mode 2: 80x50
0:321  0:000    Mode 3: 100x31
0:321  0:000    Mode 4: 320x56
0:321  0:000  SetScreenResolution: 2560x1080 - already set
0:321  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,7D36F89B-586C-431F-83CD-D892080B86B3,0x28,0x64000)
0:322  0:000  ScanSPD() start
0:322  0:000  SMBus CmdReg: 0x3
0:322  0:000  Scanning SMBus [8086:A123], mmio: 0xF714A004, ioport: 0xF000, hostc: 0x11
0:322  0:000  Slots to scan [8]...
0:349  0:027  SPD[0]: Type 12 @0x50 
0:350  0:000  Sorry, DDR4 is not fully implemented! Use settings in config.plist
0:350  0:000  DDR speed 3200MHz 
0:350  0:000  Slot: 0 Type 26 4096MB 3200MHz Vendor=NoName PartNo= SerialNo=0200020B000C020B 
0:392  0:042  ScanSPD() end
0:392  0:000  Get Acpi Tables List from RSDT:
0:392  0:000   Found table: FACP  A M I  len=132
0:392  0:000   Found table: APIC  A M I  len=188
0:392  0:000   Found table: FPDT  A M I  len=68
0:392  0:000   Found table: FIDT  A M I  len=156
0:392  0:000   Found table: MCFG  A M I len=60
0:392  0:000   Found table: HPET  A M I len=56
0:392  0:000   Found table: SSDT  SataTabl len=877
0:392  0:000   Found table: LPIT  SKL len=148
0:392  0:000   Found table: SSDT  sensrhub len=584
0:392  0:000   Found table: SSDT  PtidDevc len=11182
0:392  0:000   Found table: SSDT  Ther_Rvp len=3315
0:392  0:000   Found table: DBGP   len=52
0:392  0:000   Found table: DBG2   len=84
0:392  0:000   Found table: SSDT  xh_rvp08 len=1797
0:392  0:000   Found table: SSDT  SaSsdt  len=21226
0:392  0:000   Found table: UEFI   len=66
0:392  0:000   Found table: SSDT  CpuSsdt len=3672
0:392  0:000   Found table: DMAR  SKL  len=112
0:392  0:000  Calibrated TSC frequency =4008557250 =4008MHz
0:392  0:000  Loading main settings
0:392  0:000  USB FixOwnership: true
0:392  0:000  Dropping 3 tables
0:392  0:000  Drop table 0 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
0:392  0:000  set table: 54445353,   74734930757043 to drop:
0:392  0:000  Drop table 1 signature="DMAR" (52414D44)
0:392  0:000  set table: 52414D44,                0 to drop:  true
0:392  0:000  
0:392  0:000  Drop table 2 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
0:392  0:000  set table: 54445353,       6D50757043 to drop:
0:392  0:000  Config set Fixes will override FixMask mask!
0:392  0:000     final mask=93EE0000
0:392  0:000  PatchesDSDT: 4 requested
0:392  0:000   DSDT bin patch #0  lenToFind=4  lenToReplace=4
0:392  0:000   DSDT bin patch #1  lenToFind=4  lenToReplace=4
0:392  0:000   DSDT bin patch #2  lenToFind=4  lenToReplace=4
0:392  0:000   DSDT bin patch #3  lenToFind=4  lenToReplace=4
0:392  0:000  Config set EnableC6: +
0:392  0:000  Config set ChassisType=0xD
0:392  0:000  found 10 volumes with blockIO
0:392  0:000   0. Volume:
0:392  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)
0:394  0:001   1. Volume:
0:394  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,7D36F89B-586C-431F-83CD-D892080B86B3,0x28,0x64000)
0:394  0:000    Result of bootcode detection: bootable unknown (legacy)
0:394  0:000    This is SelfVolume !!
0:394  0:000   2. Volume:
0:394  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,704EA2A8-A948-41D3-A226-39F19744607E,0x64028,0x1CFEBA00)
0:395  0:000   3. Volume:
0:395  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,FAE8CEFF-C997-4631-817B-DFB583B03BA7,0x1D08FA28,0x135F20)
0:396  0:000   4. Volume:
0:396  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x4,0xFFFF,0x0)
0:396  0:000   5. Volume:
0:396  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,E51FCD3F-19D2-40DA-9BB3-6322C01E6594,0x28,0x64000)
0:397  0:000    Result of bootcode detection: bootable unknown (legacy)
0:406  0:008   6. Volume:
0:406  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,862D8259-478B-4385-A155-54B844406FE3,0x64028,0xE8D64860)
0:406  0:000   7. Volume:
0:406  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)
0:407  0:000    Result of bootcode detection: bootable unknown (legacy)
0:407  0:000   8. Volume:
0:407  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)\HD(1,GPT,6208E448-E5ED-4A86-99DE-96815489B31E,0x28,0x64000)
0:408  0:000    Result of bootcode detection: bootable unknown (legacy)
0:420  0:012   9. Volume:
0:420  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)\HD(2,GPT,7679E440-D6C6-40E3-8B50-D3C9C0735466,0x64028,0x4A7B4260)
0:421  0:000   using embedded theme
0:421  0:000  Choosing theme <null string>
0:421  0:000  found boot-args in NVRAM:nvda_drv=1, size=11
0:421  0:000  ...found arg:nvda_drv=1
0:421  0:000  Custom entries start
0:421  0:000  Custom entries finish
0:421  0:000  Scanning loaders...
0:421  0:000   0: 'Whole Disc Boot' no file system
0:421  0:000   1: 'EFI'
0:424  0:002   2: 'Macintosh HD 256'
0:428  0:003      AddLoaderEntry for Volume Name=Macintosh HD 256
0:431  0:003      Check if volume Is Hibernated:
0:431  0:000      Check sleep image 'by signature':
0:435  0:004      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
0:435  0:000      SleepImage name from pref: ImageVolume = 'Macintosh HD 256', ImageName = '\private\var\vm\sleepimage'
0:439  0:003      Reading first 512 bytes of sleepimage ...
0:440  0:000   OurBlockIoRead: Lba=517E498, Offset=A2FC93000 (BlockSize=512)
0:440  0:000   sig lion: 73696D65
0:440  0:000   sig snow: 0
0:440  0:000   got sleep image offset
0:440  0:000      Reading completed -> Success
0:440  0:000       sleepimage offset acquired successfully: A2FC93000
0:440  0:000       gSleepTime: 1447019944
0:440  0:000       HFS+ volume modifyDate: 1460232298
0:440  0:000       image older then volume: 13212354 sec
0:440  0:000       image too old
0:440  0:000       hibernated: no - time
0:499  0:058   3: 'Recovery HD'
0:501  0:002      AddLoaderEntry for Volume Name=Recovery HD
0:502  0:000      Check if volume Is Hibernated:
0:502  0:000      Check sleep image 'by signature':
0:502  0:000      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
0:502  0:000      using default sleep image name = \private\var\vm\sleepimage
0:502  0:000      sleepimage not found -> Not Found
0:502  0:000       hibernated: no - sign
0:503  0:000      AddLoaderEntry for Volume Name=Recovery HD
0:504  0:001   4: 'Whole Disc Boot' no file system
0:504  0:000   5: 'EFI'
0:504  0:000   6: '2tb_tm'
0:505  0:000   7: 'Whole Disc Boot' no file system
0:505  0:000   8: 'EFI'
0:505  0:000   9: 'dump'
0:506  0:000  Custom legacy start
0:506  0:000  Custom legacy end
0:506  0:000  Scanning legacy ...
0:506  0:000   0: 'Whole Disc Boot' (legacy) not legacy
0:506  0:000   1: 'EFI' (legacy) not legacy
0:506  0:000   2: 'Macintosh HD 256' (legacy) not legacy
0:506  0:000   3: 'Recovery HD' (legacy) not legacy
0:506  0:000   4: 'Whole Disc Boot' (legacy) not legacy
0:506  0:000   5: 'EFI' (legacy) not legacy
0:506  0:000   6: '2tb_tm' (legacy) not legacy
0:506  0:000   7: 'Whole Disc Boot' (legacy) not legacy
0:506  0:000   8: 'EFI' (legacy) not legacy
0:506  0:000   9: 'dump' (legacy) not legacy
0:506  0:000  Custom tool start
0:506  0:000  Custom tool end
0:506  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
0:506  0:000  Checking EFI partition Volume 1 for Clover
0:506  0:000   Found Clover
0:507  0:000  Checking EFI partition Volume 5 for Clover
0:507  0:000  Checking EFI partition Volume 8 for Clover
0:507  0:000  GetEfiBootDeviceFromNvram:
0:507  0:000   efi-boot-device-data: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,704EA2A8-A948-41D3-A226-39F19744607E,0x64028,0x1CFEBA00)
0:507  0:000   Volume: 'PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,704EA2A8-A948-41D3-A226-39F19744607E,0x64028,0x1CFEBA00)'
0:507  0:000   LoaderPath: '<null string>'
0:507  0:000   Guid = 704EA2A8-A948-41D3-A226-39F19744607E
0:507  0:000   volume: partition = PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,704EA2A8-A948-41D3-A226-39F19744607E,0x64028,0x1CFEBA00)
0:507  0:000   searching for that partition
0:507  0:000    found entry 0. 'Boot Mac OS X from Macintosh HD 256', Volume 'Macintosh HD 256'
0:507  0:000  Boot redirected to Entry 0. 'Boot Mac OS X from Macintosh HD 256'
0:507  0:000  DefaultIndex=0 and MainMenu.EntryCount=9
0:519  0:011  Found Mouse device:
0:519  0:000  GUI ready
5:126  4:606  StartLoader() start
5:126  0:000  Entry->Settings: <null string>
5:126  0:000  Finally: Bus=100213kHz CPU=4009MHz
5:126  0:000  Kernel and Kext Patches at C76D1D38:
5:126  0:000  	Allowed: y
5:126  0:000  	Debug: n
5:126  0:000  	KernelCpu: n
5:126  0:000  	Lapic: n
5:126  0:000  	Haswell-E: n
5:126  0:000  	AICPUPM: y
5:126  0:000  	AppleRTC: y
5:126  0:000  	KernelPm: n
5:126  0:000  	FakeCPUID: 0x0
5:126  0:000  	ATIController: null
5:126  0:000  	ATIDataLength: 0
5:126  0:000  	0 Kexts to load
5:126  0:000  	6 Kexts to patch
5:126  0:000  	  KextPatch[0]: 8 bytes, AppleGraphicsDevicePolicy
5:126  0:000  	  KextPatch[1]: 7 bytes, AppleUSBXHCIPCI
5:126  0:000  	  KextPatch[2]: 4 bytes, AppleHDA
5:126  0:000  	  KextPatch[3]: 6 bytes, AppleHDA
5:126  0:000  	  KextPatch[4]: 8 bytes, AppleAHCIPort
5:126  0:000  	  KextPatch[5]: 4 bytes, AppleHDA
5:126  0:000  Loading boot.efi  status=Success
5:142  0:015  GetOSVersion: : 10.11.4
5:142  0:000  insert table 9 for dev 0:0
5:142  0:000  insert table 9 for dev 0:1
5:142  0:000  insert table 9 for dev 1F:6
5:142  0:000  Channels: 1
5:142  0:000  Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
5:142  0:000  SMBIOS Type 17 Index = 0 => 0 0:
5:142  0:000  BANK0 DIMM0 3200MHz 4096MB
5:142  0:000  mTotalSystemMemory = 4096
5:142  0:000  SMBIOS Type 17 Index = 1 => 1 1:
5:142  0:000  BANK0 DIMM1 EMPTY
5:142  0:000  SMBIOS Type 17 Index = 2 => 2 2:
5:142  0:000  BANK0 DIMM2 EMPTY
5:142  0:000  SMBIOS Type 17 Index = 3 => 3 3:
5:142  0:000  BANK0 DIMM3 EMPTY
5:142  0:000  NumberOfMemoryDevices = 4
5:142  0:000  Table 131 is present, CPUType=10
5:142  0:000  Change to: 705
5:142  0:000  RSDT 0xCF35E028
5:142  0:000  FADT from RSDT: 0xCF35E160
5:142  0:000  XSDT 0xCF35E0A0
5:142  0:000  FADT from XSDT: 0xCF37FBA8
5:142  0:000  Xsdt reallocation done
5:142  0:000  old FADT length=10C
5:142  0:000  Found OperationRegion(GNVS, SystemMemory, CFB55000, ...)
5:142  0:000  Found OperationRegion(CPSB, SystemMemory, CF0FEF18, ...)
5:142  0:000  Found OperationRegion(PNVA, SystemMemory, CFB56C98, ...)
5:142  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW1, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW1, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:142  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PREG, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PREG, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PREG, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(GPPX, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(GPPX, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(GPPX, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PDW0, SystemMemory, ...) skipping
5:143  0:000  Found OperationRegion(THBA, SystemMemory, FE200000, ...)
5:143  0:000  Unable to determine address for OperationRegion(THBA, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PCR0, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PCR0, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PCR1, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PWMR, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(PMST, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(XHCP, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(MC11, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(MC11, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(XDBW, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(XDBD, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(XDW2, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(RPAL, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(EPAC, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(NCRG, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(ICB1, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(ICB1, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(ICB1, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(ICB1, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(BAR0, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(BAR0, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(BAR1, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(BAR1, SystemMemory, ...) skipping
5:143  0:000  Found OperationRegion(ITSS, SystemMemory, FDC43100, ...)
5:143  0:000  Unable to determine address for OperationRegion(MBAR, SystemMemory, ...) skipping
5:143  0:000  Unable to determine address for OperationRegion(ACTC, SystemMemory, ...) skipping
5:144  0:000  Found OperationRegion(RAMW, SystemMemory, CFB30018, ...)
5:144  0:000  Found OperationRegion(ABNV, SystemMemory, FFFF0000, ...)
5:144  0:000  Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
5:144  0:000  Found OperationRegion(CRBD, SystemMemory, FED40000, ...)
5:144  0:000  Found OperationRegion(TPMR, SystemMemory, FFFFFFFF, ...)
5:144  0:000  Found OperationRegion(RAMX, SystemMemory, CFB44C18, ...)
5:144  0:000  Found OperationRegion(GPBX, SystemMemory, FDAE0400, ...)
5:144  0:000  Found OperationRegion(GPBB, SystemMemory, FDAF0400, ...)
5:146  0:001  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
5:148  0:002  Output DSDT before patch to /EFI/CLOVER/ACPI/origin/DSDT-or.aml
5:172  0:024  Apply DsdtFixMask=0x93EE0000 new way
5:172  0:000     drop _DSM mask=0x0000
5:172  0:000  ========= Auto patch DSDT Starting ========
5:172  0:000  VideoCard devID=0x118710DE
5:172  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
5:172  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
5:173  0:000  Audio HDA (addr:0x1F0003) setting specified layout-id=1 (0x1)
5:173  0:000   patch pattern 45484332
5:173  0:000    bin not found
5:173  0:000   patch pattern 5F4F5349
5:173  0:000    patched at 987B
5:173  0:000    patched at 79A2
5:173  0:000    patched at 3
5:173  0:000    patched at 11
5:173  0:000    patched at 18
5:173  0:000    patched at 1C
5:173  0:000    patched at 1C
5:173  0:000    patched at 1A
5:173  0:000    patched at 18
5:173  0:000    patched at 18
5:173  0:000    patched at 18
5:173  0:000    patched at 18
5:173  0:000   patch pattern 45484331
5:173  0:000    bin not found
5:173  0:000   patch pattern 48444153
5:173  0:000    patched at ABA6
5:173  0:000    patched at 19DD
5:173  0:000    patched at 86
5:173  0:000    patched at D
5:173  0:000    patched at A1
5:173  0:000    patched at 6A
5:173  0:000  first CPU found at 9574 offset 9577
5:173  0:000  score candidate at 9570
5:173  0:000  score inserted in acpi_cpu_score _PR_
5:173  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 
  within the score: _PR_
5:174  0:000  Found PCIROOTUID = 0
5:174  0:000  Start RTC Fix
5:174  0:000  found RTC Length not match, Maybe will case CMOS reset will patch it.
5:174  0:000  found RTC had IRQNoFlag will move -3 bytes
5:174  0:000  ...len=21CFC
5:174  0:000  new size written to 20A41 shift=0 len=21CFC
5:174  0:000  len after correct outers 21CFC
5:174  0:000  Start TMR Fix
5:175  0:000  device (IMEI) found at 10072, don't add!
5:175  0:000  Start _WAK Return Fix
5:175  0:000  _WAK Method find return data, don't need to patch.
5:175  0:000  return len=21D07
5:175  0:000   deleting device CRT_
5:175  0:000   deleting device DVI_
5:176  0:000   deleting device SPKR
5:176  0:000   deleting device ECP_
5:177  0:000   deleting device LPT_
5:177  0:000   deleting device FDC0
5:177  0:000   deleting device ECP1
5:178  0:000   deleting device LPT1
5:178  0:000  Start PNLF Fix
5:178  0:000  found PWRB at 20B5D
5:178  0:000  Start _S3D Fix
5:179  0:000    indirect name=PNVB
5:179  0:000  OperationRegion (THBA...) corrected to addr=0xFE200000
5:179  0:000    indirect name=RAMB
5:179  0:000    indirect name=TPMM
5:179  0:000    indirect name=FTPM
5:179  0:000    indirect name=RAMS
5:179  0:000  Start ADP1 fix
5:179  0:000  no device(AC) exists
5:179  0:000  ========= Auto patch DSDT Finished ========
5:197  0:018  Drop tables from Xsdt, SIGN=DMAR TableID=SKL  Length=112
5:197  0:000   Xsdt has tables count=18 
5:197  0:000   Table: DMAR  SKL   112 dropped
5:197  0:000  corrected XSDT length=172
5:197  0:000  Patch table: SSDT  SataTabl
5:197  0:000   SSDT len = 0x36D
5:197  0:000   patch pattern 45484332
5:197  0:000    bin not found
5:197  0:000   patch pattern 5F4F5349
5:197  0:000    bin not found
5:197  0:000   patch pattern 45484331
5:197  0:000    bin not found
5:197  0:000   patch pattern 48444153
5:197  0:000    bin not found
5:197  0:000  Patch table: SSDT  sensrhub
5:197  0:000   SSDT len = 0x248
5:197  0:000   patch pattern 45484332
5:197  0:000    bin not found
5:197  0:000   patch pattern 5F4F5349
5:197  0:000    bin not found
5:197  0:000   patch pattern 45484331
5:197  0:000    bin not found
5:197  0:000   patch pattern 48444153
5:197  0:000    bin not found
5:197  0:000  Patch table: SSDT  PtidDevc
5:197  0:000   SSDT len = 0x2BAE
5:197  0:000   patch pattern 45484332
5:197  0:000    bin not found
5:197  0:000   patch pattern 5F4F5349
5:198  0:000    bin not found
5:198  0:000   patch pattern 45484331
5:198  0:000    bin not found
5:198  0:000   patch pattern 48444153
5:198  0:000    bin not found
5:198  0:000  Patch table: SSDT  Ther_Rvp
5:198  0:000   SSDT len = 0xCF3
5:198  0:000   patch pattern 45484332
5:198  0:000    bin not found
5:198  0:000   patch pattern 5F4F5349
5:198  0:000    bin not found
5:198  0:000   patch pattern 45484331
5:198  0:000    bin not found
5:198  0:000   patch pattern 48444153
5:198  0:000    bin not found
5:198  0:000  Patch table: SSDT  xh_rvp08
5:198  0:000   SSDT len = 0x705
5:198  0:000   patch pattern 45484332
5:198  0:000    bin not found
5:198  0:000   patch pattern 5F4F5349
5:198  0:000    bin not found
5:198  0:000   patch pattern 45484331
5:198  0:000    bin not found
5:198  0:000   patch pattern 48444153
5:198  0:000    bin not found
5:198  0:000  Patch table: SSDT  SaSsdt 
5:198  0:000   SSDT len = 0x52EA
5:198  0:000   patch pattern 45484332
5:198  0:000    bin not found
5:198  0:000   patch pattern 5F4F5349
5:198  0:000    bin not found
5:198  0:000   patch pattern 45484331
5:198  0:000    bin not found
5:198  0:000   patch pattern 48444153
5:198  0:000    bin not found
5:198  0:000  Patch table: SSDT  CpuSsdt
5:198  0:000   SSDT len = 0xE58
5:198  0:000   patch pattern 45484332
5:198  0:000    bin not found
5:198  0:000   patch pattern 5F4F5349
5:198  0:000    bin not found
5:198  0:000   patch pattern 45484331
5:198  0:000    bin not found
5:198  0:000   patch pattern 48444153
5:198  0:000    bin not found
5:198  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
5:198  0:000   Xsdt has tables count=17 
5:198  0:000  corrected XSDT length=172
5:198  0:000  Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success
5:198  0:000   CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
5:198  0:000  Maximum control=0x28
5:198  0:000  Turbo control=0x2A
5:198  0:000  P-States: min 0x8, max 0x2A
5:198  0:000  SSDT with CPU P-States generated successfully
5:198  0:000  SSDT with CPU C-States generated successfully
5:198  0:000  EdidDiscovered size=128
5:198  0:000  00 | 00 FF FF FF FF FF FF 00 1E 6D 6A 5A 01 01 01 01 
5:198  0:000  16 | 01 17 01 03 80 3A 18 78 EA 0A 95 A8 54 4C 9E 26 
5:198  0:000  32 | 0F 50 54 A5 4B 80 71 4F 81 80 81 C0 A9 C0 B3 00 
5:198  0:000  48 | D1 C0 01 01 01 01 CD 46 00 A0 A0 38 1F 40 30 20 
5:198  0:000  64 | 3A 00 A5 22 21 00 00 18 02 3A 80 18 71 38 2D 40 
5:198  0:000  80 | 58 2C 45 00 A5 22 21 00 00 1E 00 00 00 FC 00 4C 
5:198  0:000  96 | 47 20 55 4C 54 52 41 57 49 44 45 0A 00 00 00 FD 
5:198  0:000  112 | 00 38 4B 1E 5A 18 00 0A 20 20 20 20 20 20 00 71 
5:198  0:000  NVidia GFX injection not set
5:198  0:000  USB Controller [8086:A12F] :: PciRoot(0x0)\Pci(0x14,0x0)
5:199  0:000   RCBA disabled; cannot use it
5:199  0:000  HDA Controller [8086:A170] :: PciRoot(0x0)\Pci(0x1F,0x3) => setting specified layout-id=1 (0x1)
5:199  0:000  LAN Controller [8086:15B8] :: PciRoot(0x0)\Pci(0x1F,0x6)
5:199  0:000  stringlength = 1042
5:199  0:000  CurrentMode: Width=2560 Height=1080
5:199  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CBB56518
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CBB56518
5:205  0:006  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
5:206  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
5:208  0:001    Extra kext: EFI\CLOVER\kexts\10.11\AppleLPCInjector.kext
5:209  0:000    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC.kext
5:211  0:002    Extra kext: EFI\CLOVER\kexts\10.11\realtekALC.kext
5:214  0:002  SetStartupDiskVolume:
5:214  0:000    * Volume: 'Macintosh HD 256'
5:214  0:000    * LoaderPath: '<null string>'
5:214  0:000    * DevPath: Macintosh HD 256
5:214  0:000    * GUID = 704EA2A8-A948-41D3-A226-39F19744607E
5:214  0:000    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>704EA2A8-A948-41D3-A226-39F19744607E</string></dict></dict></dict></array>
5:214  0:000  Custom boot is disabled
5:214  0:000  Closing log

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<true/>
			<key>DropOEM_DSM</key>
			<false/>
			<key>Fixes</key>
			<dict>
				<key>AddIMEI_80000</key>
				<true/>
				<key>AddPNLF_1000000</key>
				<true/>
				<key>DeleteUnused_400000</key>
				<true/>
				<key>FIX_ADP1_800000</key>
				<true/>
				<key>FIX_RTC_20000</key>
				<true/>
				<key>FIX_S3D_2000000</key>
				<true/>
				<key>FIX_TMR_40000</key>
				<true/>
				<key>FIX_WAK_200000</key>
				<true/>
				<key>FixRegions_10000000</key>
				<true/>
				<key>NewWay_80000000</key>
				<true/>
			</dict>
			<key>Name</key>
			<string>DSDT.aml</string>
			<key>Patches</key>
			<array>
				<dict>
					<key>Comment</key>
					<string>change EHC2 to EH02</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>
					RUhDMg==
					</data>
					<key>Replace</key>
					<data>
					RUgwMg==
					</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>change _OSI to XOSI</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>
					X09TSQ==
					</data>
					<key>Replace</key>
					<data>
					WE9TSQ==
					</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>change EHC1 to EH01</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>
					RUhDMQ==
					</data>
					<key>Replace</key>
					<data>
					RUgwMQ==
					</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>Rename HDAS to HDEF</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>
					SERBUw==
					</data>
					<key>Replace</key>
					<data>
					SERFRg==
					</data>
				</dict>
			</array>
			<key>ReuseFFFF</key>
			<false/>
		</dict>
		<key>DropTables</key>
		<array>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>Cpu0Ist</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>DMAR</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>CpuPm</string>
			</dict>
		</array>
		<key>HaltEnabler</key>
		<true/>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<false/>
			<key>EnableC6</key>
			<true/>
			<key>Generate</key>
			<true/>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>darkwake=10 nvda_drv=1 kext-dev-mode=1</string>
		<key>Debug</key>
		<false/>
		<key>DefaultVolume</key>
		<string>LastBootedVolume</string>
		<key>Legacy</key>
		<string>PBR</string>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>2</integer>
		<key>XMPDetection</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>1</string>
			<key>ResetHDA</key>
			<true/>
		</dict>
		<key>FakeID</key>
		<dict>
			<key>ATI</key>
			<string>0x0</string>
			<key>IMEI</key>
			<string>0x0</string>
			<key>IntelGFX</key>
			<string>0x0</string>
			<key>LAN</key>
			<string>0x0</string>
			<key>NVidia</key>
			<string>0x0</string>
			<key>SATA</key>
			<string>0x0</string>
			<key>WIFI</key>
			<string>0x0</string>
			<key>XHCI</key>
			<string>0x0</string>
		</dict>
		<key>USB</key>
		<dict>
			<key>FixOwnership</key>
			<true/>
			<key>Inject</key>
			<true/>
		</dict>
	</dict>
	<key>DisableDrivers</key>
	<array>
		<string>Nothing</string>
	</array>
	<key>GUI</key>
	<dict>
		<key>Hide</key>
		<array>
			<string>BOOTX64.EFI</string>
			<string>Windows</string>
		</array>
		<key>Language</key>
		<string>en:0</string>
		<key>Mouse</key>
		<dict>
			<key>DoubleClick</key>
			<integer>500</integer>
			<key>Enabled</key>
			<true/>
			<key>Mirror</key>
			<false/>
			<key>Speed</key>
			<integer>8</integer>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Legacy</key>
			<true/>
			<key>Tool</key>
			<true/>
		</dict>
		<key>Theme</key>
		<string>embedded</string>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<false/>
			<key>Intel</key>
			<false/>
			<key>NVidia</key>
			<false/>
		</dict>
		<key>NvidiaSingle</key>
		<false/>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<true/>
		<key>Debug</key>
		<false/>
		<key>KernelCpu</key>
		<false/>
		<key>KernelHaswellE</key>
		<false/>
		<key>KernelLapic</key>
		<false/>
		<key>KernelPm</key>
		<false/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>AppleGraphicsDevicePolicy (board-id) Patch (c) 				Pike R. Alpha</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				Ym9hcmQtaWQ=
				</data>
				<key>Name</key>
				<string>AppleGraphicsDevicePolicy</string>
				<key>Replace</key>
				<data>
				Ym9hcmQtaXg=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>change 15 port limit to 30</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				g72M/v//EA==
				</data>
				<key>Name</key>
				<string>AppleUSBXHCIPCI</string>
				<key>Replace</key>
				<data>
				g72M/v//Hw==
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>t1-10.9-10.11-AppleHDA/Realtek ALC887</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				ixnUEQ==
				</data>
				<key>Name</key>
				<string>AppleHDA</string>
				<key>Replace</key>
				<data>
				hwjsEA==
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>t1-AppleHDA/Resources/xml>zml</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				eG1sLnps
				</data>
				<key>Name</key>
				<string>AppleHDA</string>
				<key>Replace</key>
				<data>
				em1sLnps
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>External icons patch</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				RXh0ZXJuYWw=
				</data>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				SW50ZXJuYWw=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>t1-10.11-AppleHDA/Realtek ALC...</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				gxnUEQ==
				</data>
				<key>Name</key>
				<string>AppleHDA</string>
				<key>Replace</key>
				<data>
				AAAAAA==
				</data>
			</dict>
		</array>
	</dict>
	<key>RtVariables</key>
	<dict>
		<key>BooterConfig</key>
		<string>0x28</string>
		<key>CsrActiveConfig</key>
		<string>0x3</string>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>BiosReleaseDate</key>
		<string>09/22/2015</string>
		<key>BiosVendor</key>
		<string>Apple Inc.</string>
		<key>BiosVersion</key>
		<string>IM171.88Z.0105.B00.1509221819</string>
		<key>Board-ID</key>
		<string>Mac-hidden</string>
		<key>BoardManufacturer</key>
		<string>Apple Inc.</string>
		<key>BoardType</key>
		<integer>10</integer>
		<key>BoardVersion</key>
		<string>iMac17,1</string>
		<key>ChassisAssetTag</key>
		<string></string>
		<key>ChassisManufacturer</key>
		<string>Apple Inc.</string>
		<key>ChassisType</key>
		<string>13</string>
		<key>Family</key>
		<string>iMac</string>
		<key>LocationInChassis</key>
		<string>Part Component</string>
		<key>Manufacturer</key>
		<string>Apple Inc.</string>
		<key>Memory</key>
		<dict>
			<key>Channels</key>
			<integer>0</integer>
		</dict>
		<key>ProductName</key>
		<string>iMac17,1</string>
		<key>SerialNumber</key>
		<string>hidden</string>
		<key>Trust</key>
		<false/>
		<key>Version</key>
		<string>1.0</string>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectKexts</key>
		<string>Yes</string>
		<key>InjectSystemID</key>
		<true/>
	</dict>
</dict>
</plist>

Share this post


Link to post
Share on other sites

Exactly. The iphone is plugged to the keyboard.

0:100  0:100  MemLog inited, TSC freq: 4008557250
0:100  0:000  MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100  0:000  
0:100  0:000  Now is 9.4.2016,  20:5:11 (GMT+2047)
0:100  0:000  Starting Clover rev 3388 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,7D36F89B-586C-431F-83CD-D892080B86B3,0x28,0x64000) @CBB56818
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 2400MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 DIMM_A1
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 DIMM_A2
0:100  0:000  Type 17 Index = 2
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 DIMM_B1
0:100  0:000  Type 17 Index = 3
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 DIMM_B2
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 3388  running on System Product Name
0:100  0:000  ... with board Z170M-PLUS
0:100  0:000  CPU Vendor = 756E6547 Model=506E3
0:100  0:000  got cores from CPUID_1 = 0
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz
0:100  0:000   TSC/CCC Information Leaf:
0:100  0:000    numerator     : 334
0:100  0:000    denominator   : 2
0:100  0:000   Calibrated ARTFrequency: 24003336
0:100  0:000  MSR 0xE2 before patch 1E000000
0:100  0:000  MSR 0xE4              00031814
0:100  0:000  MSR 0xCE              00080838_F1012800
0:100  0:000  non-usable FLEX_RATIO = F0000
0:100  0:000  corrected FLEX_RATIO = E0000
0:100  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 40.0/8
0:100  0:000  Turbo: 40/40/40/42
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 8
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 4000 MHz
0:100  0:000  TSC: 4000 MHz
0:100  0:000  PIS: 400 MHz
...

First of all, you should configure your memory in the config.plist file. Reason: ddr4 is not fully supported and memory detection may be wrong.

 

What affects your charging problem, you have a lot of enabled patches/fixes. I'd suggest to use minimal, required, patches/fixes until you get a fully working system, you can always add other customisations later. In this way you'll find what causes your problem, as you mentioned that it's charging before booting into the system.

 

If I were you, I'd start with only the fakesmc and the required, system instructions, aka .aml files.

 

In addition, what does your console show when you attempt to charge your phone via the keyboard? Did you try with other devices?

 

For anybody else reading this, if you have spotted a problem I don't see, feel free to correct me.

Share this post


Link to post
Share on other sites

Someone has working DumpUefiCalls.efi? I seems lost something. All my versions just hangs on black screen.

I want to see what news with ElCapitan here.

 

 

PS. It works with legacy boot. The problem with UEFI boot.

 

PPS. Yes, there is a news here. ElCapitan asked for Smbios3 table

No, this is an undesirable change in CloverEFI.

 

PPPS. Works with UEFI boot too.

Share this post


Link to post
Share on other sites

Both screen are with AptioFix, there is no AptioFix2 version because I see messages.

Today I again try last version of Clover with AptioFix2 and share pic here.

Share this post


Link to post
Share on other sites

@crusher - i recently saw a similar message and changing my CsrActiveSetting to 0x43 (from 0x3) fixed this apparent error. 

Share this post


Link to post
Share on other sites

@crusher - i recently saw a similar message and changing my CsrActiveSetting to 0x43 (from 0x3) fixed this apparent error. 

thx for answer I try today with different CsrActiveSetting.

Share this post


Link to post
Share on other sites

No. I always UEFI mode and AptioFix and PartitionDxe driver. Today I sent you my EFI folder.

DataHubDxe is obiligatory module for UEFI boot.

Share this post


Link to post
Share on other sites

Interesting. I don't use it on any of my systems, all booting UEFI.

This is a question for debugging if you want to check.

He said about reboot, I proposed DataHubDxe missing. It is cause and reason.

OsxAptioFix2Drv and DataHubDxe make a this problem:

attachicon.gifIMAG0096.jpg

error allocating pages is the most discussed question in UEFI booting.

There are workarounds:

1. Use different AptioFix/LowMemFix versions.

2. Use slide=something

3. Disable SIP entirely

4. Reboot twice

5. Restrict a number of custom kexts

6. Optimize your BIOS settings

If nothing helped then use legacy Clover.

Share this post


Link to post
Share on other sites

Same. I have it and PartitionDxe under DisableDrivers on all three of my installs.

If you look at the source, DataHub appears to relay important variables to the OS. So I use it anyway, even though the system can ostensibly boot fine w/o it.

Share this post


Link to post
Share on other sites

Your systems boot fine because AMI Aptio 4 ships with DataHub... not even AMI is junk enough to not include DataHub. :P

DataHub cannot fix allocation errors. I had asked for a memory map before (privately) and got no response... with nothing to work with, legacy is the only 100% solution.

Share this post


Link to post
Share on other sites

Your systems boot fine because AMI Aptio 4 ships with DataHub... not even AMI is junk enough to not include DataHub. :P

DataHub cannot fix allocation errors. I had asked for a memory mao before (privately) and got no response... with nothing to work with, legacy is the only 100% solution.

I assume you mean "memory map". Do you have any information on how to collect a memory map, and what we are looking for in it?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By metaphysician
      hi folks! i'm just checking for opinions here on a Clover based install of High Sierra. currently i can't boot directly from the internal drive on my hackbook, an ASUS ROG GL502-VS laptop (with the replaced WiFi card), though i can boot from the USB bootloader/installer

      i installed 10.13.6 fine using a prepared vanilla installer on HFS+ (not APFS), but my configuration is somewhat unusual. i have two drives. the first SSD has the Windows system, the second has two partitions with the 2nd partition holding the macOS system. when i ran Clover installer i could not use the UEFI option to copy to the EFI partition because it couldn't find one on that drive. so it installed the EFI folder on the root of the macOS partition instead.
       
      however, after a bit of tinkering around, i found out that there is an existing EFI partition on the primary drive called SYSTEM. it has a EFI folder and underneath that is a Windows folder, a Boot folder, and one called APPLE. i can mount this partition with Clover Configurator and copy files to it, but i don't know if this is a good or risky solution. i was thinking i would manually copy the CLOVER folder and the uefi64.boot file to this partition , making sure not to overwrite anything existing. using the UEFI setup, i can create a boot path from the SYSTEM partition to the Clover boot file, but i'm just curious if this is a useful solution or not, and i don't want to ruin the existing Windows 10 installation for sure. any advice appreciated!
    • By Slice
      OK, 4988 released.
      Now, @vector sigma, what have we do to update translations?
    • By fusion71au
      Clover r4989 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4989 for VMware.zip". Mount Clover-v2.4k-4989-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
×