Jump to content
ErmaC

Clover General discussion

22,194 posts in this topic

Recommended Posts

Advertisement

isl version changed from 0.12.2 when it worked to 0.14 with the problem.

Test, please,

./buildgcc4.9.sh line 37

export ISL_VERSION=${ISL_VERSION:-isl-0.14}

change to …-0.12.2

Thanks! So everything is compiled.

IMac122:Clover droplets$ ./buildgcc-4.9.sh -x64 -all
- Building GCC toolchain for x64
  Running on Mac OS X 10.10, with x86_64 architecture.
  Using Xcode SDK: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk
- Creating new RAM disk
Initialized /dev/rdisk2 as a 2 GB case-insensitive HFS Plus volume
- gmp-6.0.0a extracting...
- gmp-6.0.0a extracted
- gmp-6.0.0a configure...
- gmp-6.0.0a make...
- gmp-6.0.0a installed in /Users/droplets/src/opt/local
- mpfr-3.1.2 extracting...
- mpfr-3.1.2 extracted
- mpfr-3.1.2 configure...
- mpfr-3.1.2 make...
- mpfr-3.1.2 installed in /Users/droplets/src/opt/local
- mpc-1.0.2 extracting...
- mpc-1.0.2 extracted
- mpc-1.0.2 configure...
- mpc-1.0.2 make...
- mpc-1.0.2 installed in /Users/droplets/src/opt/local
- isl-0.12.2 extracting...
- isl-0.12.2 extracted
- isl-0.12.2 configure...
- isl-0.12.2 make...
- isl-0.12.2 installed in /Users/droplets/src/opt/local
- cloog-0.18.1 extracting...
- cloog-0.18.1 extracted
- cloog-0.18.1 configure...
- isl-0.12.2 reconfigure...
- isl-0.12.2 make...
- cloog-0.18.1 make...
- cloog-0.18.1 installed in /Users/droplets/src/opt/local
- gcc-4.9.2 extracting...
- gcc-4.9.2 extracted
- gcc-4.9.2 (native) configure...
- gcc-4.9.2 (native) make...
- gcc-4.9.2 (native) installing...
- Copying headers and library files...
- gcc-4.9.2 installed in /Users/droplets/src/opt/local
- binutils-2.25 extracting...
- binutils-2.25 extracted
- binutils-2.25 configure...
- binutils-2.25 make...
- binutils-2.25 installed in /Users/droplets/src/opt/local/cross
- gcc-4.9.2 configure...
- gcc-4.9.2 make...
- gcc-4.9.2 installed in /Users/droplets/src/opt/local/cross
* GCC toolchain Build process took 10m32s to complete...
- Ejecting RAM disk
"disk2" unmounted.
"disk2" ejected.

Share this post


Link to post
Share on other sites

@mieze 

There is a way to block a kext from starting. - besides kext patching which as you said means you must load it first edit it if only to make it not load!

 

The GUI Options menu allows one to enter a kext name to block it from starting. I don't know how to do this from the config.plist. It would be handy. 

Share this post


Link to post
Share on other sites

isl version changed from 0.12.2 when it worked to 0.14 with the problem.

Test, please,

./buildgcc4.9.sh line 37

export ISL_VERSION=${ISL_VERSION:-isl-0.14}

change to …-0.12.2

 

 

hello Slice

 

i compile 3185 with 0.14 without problems

 

thanks

Share this post


Link to post
Share on other sites

Hi, I have two HDD: one with Yosemite, and the other with Windows 7.

I just migrated from Chimera to Clover installing the Legacy version into the Yosemite HDD (my motherboard Gigabyte P55A-UD4) and all works fine.

But I have to set Windows 7 like the default OS into the boot menu in Clover. How to do that? I'm going to be crazy...  :)  :(

Thanks a lot

Share this post


Link to post
Share on other sites

Hi Slice !

Do you please confirm yes or not

I remove arg kext-dev-mode=1 on my config.plist and everything works perfect  :)

Not need annymore this args ?

 

I see this on my boot log 

 

 

 

0:982  0:000  theme hmf defined in NVRAM found and theme.plist parsed
0:982  0:000  OS main and drive as badge
0:982  0:000  Font EFI\CLOVER\font\(null) is not loaded, using default
0:982  0:000  Choosing theme hmf
0:982  0:000  found boot-args in NVRAM:kext-dev-mode=1, size=16
0:982  0:000  ...found arg:kext-dev-mode=1
0:982  0:000  ...adding arg:kext-dev-mode=1
 
What about that ??  B)

Share this post


Link to post
Share on other sites

 

Hi Slice !

Do you please confirm yes or not

I remove arg kext-dev-mode=1 on my config.plist and everything works perfect  :)

Not need annymore this args ?

 

I see this on my boot log 

 

 

 

0:982  0:000  theme hmf defined in NVRAM found and theme.plist parsed
0:982  0:000  OS main and drive as badge
0:982  0:000  Font EFI\CLOVER\font\(null) is not loaded, using default
0:982  0:000  Choosing theme hmf
0:982  0:000  found boot-args in NVRAM:kext-dev-mode=1, size=16
0:982  0:000  ...found arg:kext-dev-mode=1
0:982  0:000  ...adding arg:kext-dev-mode=1
 
What about that ??  B)

 

The flag "kext-dev-mode=1" is cached in nvram that has priority on config.plist.

You may clean nvram but I think you don't need to do this. All is right.

Share this post


Link to post
Share on other sites

The flag "kext-dev-mode=1" is cached in nvram that has priority on config.plist.

You may clean nvram but I think you don't need to do this. All is right.

Thanks !

Share this post


Link to post
Share on other sites

Major Dilemma any suggestions are welcome!!  I have a couple older Quad Core 2's for example QX6850 3.0GHZ on two different motherboards. One is a Gigabyte P45 chipset and the other is an Asus Maximus Formula X38 chipset, both LGA775 sockets.  If I use iMac10,1 for example I have good CPU PowerManagement.  If I want to use a more modern day Graphics card like GT 610, 640 or GTX 760,770, I have to use a SMBIOS of imac13 or 14 or I will get no signal to monitor.  If I choose imac13,2 for example I get to desktop (acceleration), with the modern day graphics cards.  If I use iMac13,2 of course my CPU will be stuck at 3Ghz, no CPU power Management.

 

The only way for now to get CPU Power Management is to use a System Definition that was meant for that CPU class.  The only resolution right now for GPU, would be to use a graphics card older than GT 400, 500 or 600 series assuming that the 200 and 300 series will be the same issue or not?  Right now I have the GS 8400, GT 9500 and GTX 9800 no issues with SMBIOS iMac10,1, gets to desktop with acceleration and proper CPU Power managmeent.

 

I am wondering if the GT240 will have the same issue as the 400, 500,600 and 700 series or not and what else can I do in Clover to have FakeID or something else make the CPU Power Management work under imac13,2, so I can use the later series graphics cards?

 

Thanks

Share this post


Link to post
Share on other sites

Major Dilemma any suggestions are welcome!!  I have a couple older Quad Core 2's for example QX6850 3.0GHZ on two different motherboards. One is a Gigabyte P45 chipset and the other is an Asus Maximus Formula X38 chipset, both LGA775 sockets.  If I use iMac10,1 for example I have good CPU PowerManagement.  If I want to use a more modern day Graphics card like GT 610, 640 or GTX 760,770, I have to use a SMBIOS of imac13 or 14 or I will get no signal to monitor.  If I choose imac13,2 for example I get to desktop (acceleration), with the modern day graphics cards.  If I use iMac13,2 of course my CPU will be stuck at 3Ghz, no CPU power Management.

 

The only way for now to get CPU Power Management is to use a System Definition that was meant for that CPU class.  The only resolution right now for GPU, would be to use a graphics card older than GT 400, 500 or 600 series assuming that the 200 and 300 series will be the same issue or not?  Right now I have the GS 8400, GT 9500 and GTX 9800 no issues with SMBIOS iMac10,1, gets to desktop with acceleration and proper CPU Power managmeent.

 

I am wondering if the GT240 will have the same issue as the 400, 500,600 and 700 series or not and what else can I do in Clover to have FakeID or something else make the CPU Power Management work under imac13,2, so I can use the later series graphics cards?

 

Thanks

May be it will be better to patch the kext AppleGPUPM? Why not?

Share this post


Link to post
Share on other sites

@Slice,  I actually tried that using the AGPMLegacy kext and still have no signal to monitor?  Would just editing the native AGPM itself change anything?

Share this post


Link to post
Share on other sites

Help please:

Black screen, white letters:

Welcome to Clover 3175:3182

. . . . . . . . scan entries . . . 

 

No UI, no keyboard, stuck.

Share this post


Link to post
Share on other sites

Try this version (3188) and or attach boot.log

Thanks, 3176 log attached.

0:100  0:100  MemLog inited, TSC freq: 3200003569
0:100  0:000  
0:100  0:000  Now is 5.3.2015,  4:17:33 (GMT+2047)
0:100  0:000  Starting Clover rev 3176:3182 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,EA40D4E9-1060-4D21-90F2-17E821D45D7F,0x28,0x64000) @BA388C18
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 2
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 3176:3182  running on Z97N-WIFI
0:100  0:000  ... with board Z97N-WIFI
0:100  0:000  CPU Vendor = 756E6547 Model=306C3
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i5-4690S CPU @ 3.20GHz
0:100  0:000  MSR 0xE2 before patch 1E000404
0:100  0:000  MSR 0xE4              00021814
0:100  0:000  MSR 0xCE              00080838_F3012000
0:100  0:000  non-usable FLEX_RATIO = 10000
0:100  0:000  corrected FLEX_RATIO = 0
0:100  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x3C/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 32.0/8
0:100  0:000  Turbo: 35/36/38/39
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3200 MHz
0:100  0:000  TSC: 3200 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  PCI (00|00:00.00) : 8086 0C00 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0C01 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 0FC1 class=030000
0:100  0:000  Found NVidia model=EVGA GeForce GT 640
0:100  0:000  PCI (00|01:00.01) : 10DE 0E1B class=040300
0:100  0:000  PCI (00|00:02.00) : 8086 0412 class=030000
0:100  0:000  Found GFX model=Intel HD Graphics 4600
0:100  0:000  PCI (00|00:03.00) : 8086 0C0C class=040300
0:100  0:000  PCI (00|00:14.00) : 8086 8CB1 class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 8CBA class=078000
0:100  0:000  PCI (00|00:19.00) : 8086 153B class=020000
0:100  0:000  LAN 0, Vendor=8086, MMIO=F7A00000
0:100  0:000  PCI (00|00:1A.00) : 8086 8CAD class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 8CA0 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 8C90 class=060400
0:100  0:000  PCI (00|00:1C.03) : 8086 8C96 class=060400
0:100  0:000  PCI (00|03:00.00) : 1969 1091 class=020000
0:100  0:000  LAN 1, Vendor=1969, MMIO=F7900000
0:100  0:000  PCI (00|00:1C.04) : 8086 8C98 class=060400
0:100  0:000  PCI (00|04:00.00) : 14E4 4357 class=028000
0:100  0:000  PCI (00|00:1D.00) : 8086 8CA6 class=0C0320
0:100  0:000  PCI (00|00:1F.00) : 8086 8CC4 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 8C82 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 8CA2 class=0C0500
0:100  0:000  Clover load options size = 0 bytes
0:104  0:004  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:104  0:000  EFI\CLOVER\config.plist loaded: Success
0:106  0:001  Found theme directory: EMBEDDED
0:107  0:001  Found theme directory: METAL
0:111  0:003  Found theme directory: RANDOM
0:112  0:001  Loading early settings
0:112  0:000  timeout set to 10
0:112  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:130  0:018  KextsToPatch: 10 requested
0:133  0:002  KextToPatch 0: IOGraphicsFamily (10.10.2-Second Stage Patch 2-2) Kext bin patch, data len: 5
0:147  0:014  KextToPatch 1: AppleHDAController (10.9/HD4600 HDMI Audio 1/2) Kext bin patch, data len: 5
0:162  0:014  KextToPatch 2: AppleIntelFramebufferAzul (10.9.2/Azul/Port 06/DP>HDMI) Kext bin patch, data len: 12
0:178  0:015  KextToPatch 3: AppleHDAController (10.9/HD4600 HDMI Audio 2/2 ) Kext bin patch, data len: 5
0:193  0:015  KextToPatch 4: AppleIntelFramebufferAzul (10.9.2/Azul/Port 07/DP>HDMI) Kext bin patch, data len: 12
0:205  0:012  KextToPatch 5: AppleHDA (t1-10.9/AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:217  0:011  KextToPatch 6: IOAHCIBlockStorage (TrimEnabler) Kext bin patch, data len: 9
0:229  0:012  KextToPatch 7: AppleHDA (t1-10.9/AppleHDA/Realtek ALC892) Kext bin patch, data len: 4
0:235  0:006  KextToPatch 8: IOGraphicsFamily (10.10-Second Stage Patch 1-2) Kext bin patch, data len: 5
0:243  0:007  KextToPatch 9: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:249  0:006  Default theme: metal
0:251  0:001  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:252  0:001  Hiding entries with string Windows
0:254  0:001  LoadDrivers() start
0:257  0:002  Loading FSInject-64.efi  status=Success
0:263  0:006  Loading OsxAptioFix2Drv-64.efi  status=Success
0:270  0:006  Loading OsxFatBinaryDrv-64.efi  status=Success
0:278  0:008  Loading VBoxHfs-64.efi  status=Success
0:284  0:006   - driver needs connecting
0:286  0:001  1 drivers needs connecting ...
0:287  0:001  PlatformDriverOverrideProtocol->GetDriver overriden
0:291  0:003  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:473  0:182  LoadDrivers() end
0:475  0:001  Dump SMC keys from NVRAM:
0:513  0:038  SetMaxResolution: found best mode 3: 1920x1080
0:701  0:187  Video mode change to mode #3: Success
0:702  0:001   - set
0:706  0:003  Console modes reported: 6, available modes:
0:708  0:002    Mode 1: 80x25 (current mode)
0:712  0:004    Mode 2: 80x50
0:716  0:003    Mode 3: 100x31
0:720  0:004    Mode 4: 128x30
0:724  0:003    Mode 6: 120x50
0:728  0:004  SetScreenResolution: 1920x1080 - already set
0:734  0:005  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,EA40D4E9-1060-4D21-90F2-17E821D45D7F,0x28,0x64000)
0:830  0:096  MAC address of LAN #0= 
0:851  0:021  MAC address of LAN #1= 
0:871  0:019  ScanSPD() start
0:873  0:001  SMBus CmdReg: 0x1
0:875  0:001  Scanning SMBus [8086:8CA2], mmio: 0xF7A38004, ioport: 0xF040, hostc: 0x11
0:876  0:001  Slots to scan [8]...
0:892  0:015  SPD[0]: Type 11 @0x50 
0:901  0:009  Found module with XMP version 0.0XMP Profile1: 10*1/8ns
0:904  0:003  Using XMP Profile1 instead of standard frequency 1333MHz
0:906  0:001  DDR speed 1600MHz 
0:908  0:001  Slot: 0 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBRL SerialNo=0000000000000000 
0:931  0:023  SPD[2]: Type 11 @0x52 
0:940  0:009  Found module with XMP version 0.0XMP Profile1: 10*1/8ns
0:943  0:003  Using XMP Profile1 instead of standard frequency 1333MHz
0:945  0:001  DDR speed 1600MHz 
0:946  0:001  Slot: 2 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBRL SerialNo=0000000000000000 
0:978  0:031  ScanSPD() end
0:980  0:001  Get Acpi Tables List from RSDT:
0:983  0:003   Found table: FACP  A M I len=132
0:986  0:003   Found table: APIC  A M I len=114
0:987  0:001   Found table: FPDT  A M I len=68
0:989  0:001   Found table: SSDT  Ther_Rvp len=3054
0:990  0:001   Found table: SSDT  Cpu0Ist len=1337
0:992  0:001   Found table: SSDT  CpuSsdt len=2932
0:993  0:001   Found table: MCFG  A M I len=60
0:998  0:004   Found table: HPET  A M I len=56
1:002  0:004   Found table: SSDT  SataTabl len=877
1:006  0:004   Found table: SSDT  SaSsdt  len=23390
1:010  0:004  Calibrated TSC frequency =3200003569 =3200MHz
1:015  0:005  Loading main settings
1:018  0:003  Dropping 2 tables
1:022  0:004  Drop table 0 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
1:080  0:057  set table: 54445353,       6D50757043 to drop:
1:087  0:007  Drop table 1 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
1:128  0:040  set table: 54445353,   74734930757043 to drop:  true
1:131  0:003  
1:132  0:001  PatchesDSDT: 2 requested
1:134  0:001   DSDT bin patch #0  lenToFind=4  lenToReplace=4
1:140  0:006   DSDT bin patch #1  lenToFind=4  lenToReplace=4
1:145  0:004  Config set MinMultiplier=8
1:146  0:001  Config set PluginType=0
1:148  0:001  Config set ChassisType=0xD
1:149  0:001  found 17 volumes with blockIO
1:151  0:001   0. Volume:
1:153  0:001    PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x3,0x0)
1:155  0:002    USB volume
1:157  0:001    USB volume
1:159  0:001   1. Volume:
1:160  0:001    PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x3,0x0)\HD(1,GPT,54DEFD5D-259E-48E0-AA0D-F1FE84EDD125,0x28,0x64000)
1:164  0:004    Result of bootcode detection: bootable unknown (legacy)
1:166  0:001    USB volume
1:170  0:004    USB volume
1:259  0:088   2. Volume:
1:260  0:001    PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x3,0x0)\HD(2,GPT,853E4E20-8B3B-427C-B025-EC7D0CC7C61A,0x64028,0xDF8478)
1:265  0:004    USB volume
1:269  0:003    USB volume
1:273  0:004   3. Volume:
1:277  0:004    PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x3,0x0)\HD(3,GPT,EF69E172-8469-49BD-9E45-C9C3B589EC4C,0xE9C4A0,0xDF8478)
1:283  0:005    USB volume
1:285  0:002    USB volume
1:289  0:004   4. Volume:
1:293  0:004    PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x3,0x0)\HD(4,GPT,28806EB6-CF8F-4FFC-8E45-5F88D4E6CD42,0x1CD4918,0xFF770)
1:298  0:004    USB volume
1:302  0:003    USB volume
1:306  0:004   5. Volume:
1:310  0:003    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)
1:315  0:004    Result of bootcode detection: bootable unknown (legacy)
1:317  0:002   6. Volume:
1:321  0:003    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
20:800  19:479   7. Volume:
20:802  0:001    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,EA40D4E9-1060-4D21-90F2-17E821D45D7F,0x28,0x64000)
20:806  0:004    Result of bootcode detection: bootable unknown (legacy)
20:810  0:003    This is SelfVolume !!
20:813  0:002   8. Volume:
20:816  0:003    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,24230257-9C63-4F28-AE62-1D4AD73A6E4B,0x64028,0x26CA468)
20:821  0:004   9. Volume:
20:823  0:002    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,AC25467D-CFC0-43C0-8E1D-2F685EBD7C00,0x28643B8,0x26CA470)
20:828  0:005  10. Volume:
20:830  0:002    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,7A0A4219-2A3D-4FD4-9A23-301429A8318E,0x4F2E828,0x135F20)
20:832  0:002  11. Volume:
20:834  0:001    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(5,GPT,F351B13A-3AD6-482B-8409-62220E7D2CA1,0x5064748,0x25A6420)
20:836  0:002  12. Volume:
20:837  0:001    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,D9EB860B-259C-424B-BE44-6D14B4E3D483,0x28,0x64000)
41:727  20:889  13. Volume:
41:729  0:001    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,797DA229-728A-442A-903F-A652283467BC,0x64028,0x174876E8)
41:741  0:012  14. Volume:
41:743  0:001    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,7AF52C03-ADD6-4DB1-BFF7-865615280C32,0x1752B710,0x5755B3C8)
41:756  0:012  15. Volume:
41:757  0:001    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,0849A9E6-A6BD-44A5-B860-312E3E00E611,0x6EAC6AD8,0x2E93428)
41:771  0:014  16. Volume:
41:773  0:001    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(5,GPT,0A90389B-0F67-4A65-A92D-312FB2AA3DE5,0x71999F00,0x2D2CE88)
62:528  20:755  Using theme 'metal' (EFI\CLOVER\themes\metal)
62:531  0:002  font BoG_LucidaConsole_10W_NA.png loaded from themedir
62:533  0:001  Choosing theme metal
62:535  0:001  Custom legacy start
62:536  0:001  Custom legacy end
62:538  0:001  Scanning legacy ...
62:539  0:001   0: 'Whole Disc Boot' (legacy) not legacy
62:544  0:004   1: 'EFI' (legacy) not legacy
62:547  0:003   2: 'preview' (legacy) not legacy
62:550  0:003   3: 'Yosemite' (legacy) not legacy
62:553  0:003   4: 'post_install' (legacy) not legacy
62:556  0:003   5: 'Whole Disc Boot' (legacy) not legacy
62:564  0:007   6: 'Whole Disc Boot' (legacy) not legacy
62:571  0:007   7: 'EFI' (legacy) not legacy
62:579  0:008   8: '10.9.5' (legacy) not legacy
62:587  0:007   9: '10.10' (legacy) not legacy
62:598  0:010  10: 'Recovery HD' (legacy) not legacy
62:603  0:005  11: '10.??' (legacy) not legacy
62:611  0:008  12: 'EFI' (legacy) not legacy
62:619  0:007  13: 'User' (legacy) not legacy
62:624  0:005  14: 'Media' (legacy) not legacy
62:630  0:006  15: 'OS X-a' (legacy) not legacy
62:636  0:006  16: 'OS X-b' (legacy) not legacy
62:642  0:006  Custom entries start
62:646  0:003  Custom entries finish
62:649  0:003  Scanning loaders...
62:652  0:003   0: 'Whole Disc Boot' no file system
62:658  0:006   1: 'EFI'
62:685  0:027   2: 'preview'
62:695  0:009      AddLoaderEntry for Volume Name=preview
62:699  0:003      Check if volume Is Hibernated:
62:700  0:001      Check sleep image 'by signature':
62:708  0:007      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
62:710  0:001      using default sleep image name = \private\var\vm\sleepimage
62:718  0:008      sleepimage not found -> Not Found
62:720  0:001       hibernated: no - sign
62:735  0:014   3: 'Yosemite'
62:746  0:010      AddLoaderEntry for Volume Name=Yosemite
62:750  0:004      Check if volume Is Hibernated:
62:751  0:001      Check sleep image 'by signature':
62:759  0:008      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
62:761  0:001      using default sleep image name = \private\var\vm\sleepimage
62:771  0:009      sleepimage not found -> Not Found
62:772  0:001       hibernated: no - sign
62:786  0:013   4: 'post_install'
62:804  0:018   5: 'Whole Disc Boot' no file system
62:808  0:003   6: 'Whole Disc Boot' no file system
62:811  0:003   7: 'EFI'
62:828  0:017   8: '10.9.5'
62:838  0:009      AddLoaderEntry for Volume Name=10.9.5
62:843  0:005      Check if volume Is Hibernated:
62:845  0:001      Check sleep image 'by signature':
62:857  0:012      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
62:858  0:001      SleepImage name from pref: ImageVolume = '10.9.5', ImageName = '\private\var\vm\sleepimage'
62:870  0:011      Reading first 512 bytes of sleepimage ...
62:873  0:003   OurBlockIoRead: Lba=1DA4188, Offset=3B4831000 (BlockSize=512)
62:875  0:001   sig lion: 73696D65
62:878  0:003   sig snow: 0
62:882  0:004   got sleep image offset
62:886  0:003      Reading completed -> Success
62:890  0:004       sleepimage offset acquired successfully: 3B4831000
62:893  0:003       gSleepTime: 1407444819
62:900  0:006       HFS+ volume modifyDate: 1425529037
62:903  0:003       image older then volume: 18084218 sec
62:905  0:002       image too old
62:908  0:003       hibernated: no - time
62:918  0:009      AddLoaderEntry for Volume Name=10.9.5
62:939  0:021   9: '10.10'
62:951  0:011      AddLoaderEntry for Volume Name=10.10
62:956  0:004      Check if volume Is Hibernated:
62:957  0:001      Check sleep image 'by signature':
62:968  0:010      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
62:971  0:003      using default sleep image name = \private\var\vm\sleepimage
62:978  0:007      Reading first 512 bytes of sleepimage ...
62:981  0:002   OurBlockIoRead: Lba=30A2638, Offset=6144C7000 (BlockSize=512)
62:984  0:002   sig lion: F1E0BE9D
62:987  0:003   sig snow: 0
62:991  0:003   no valid sleep image offset was found
62:992  0:001      Reading completed -> Success
62:994  0:001       sleepimage offset could not be acquired
62:995  0:001       hibernated: no - sign
63:001  0:005      AddLoaderEntry for Volume Name=10.10
63:021  0:020  10: 'Recovery HD'
63:025  0:004      AddLoaderEntry for Volume Name=Recovery HD
63:042  0:016  11: '10.??'
63:052  0:009      AddLoaderEntry for Volume Name=10.??
63:056  0:004      Check if volume Is Hibernated:
63:058  0:001      Check sleep image 'by signature':
63:063  0:005      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
63:064  0:001      SleepImage name from pref: ImageVolume = '10.??', ImageName = '\private\var\vm\sleepimage'
63:071  0:006      Reading first 512 bytes of sleepimage ...
63:073  0:002   OurBlockIoRead: Lba=6EA47E0, Offset=DD48FC000 (BlockSize=512)
63:074  0:001   sig lion: F1E0BE9D
63:076  0:001   sig snow: 0
63:077  0:001   no valid sleep image offset was found
63:079  0:001      Reading completed -> Success
63:080  0:001       sleepimage offset could not be acquired
63:082  0:001       hibernated: no - sign
63:088  0:006      AddLoaderEntry for Volume Name=10.??
63:110  0:021  12: 'EFI'
63:123  0:013  13: 'User'

Share this post


Link to post
Share on other sites

See very long delays with Sata2. Is it broken? 

1:317  0:002   6. Volume:
1:321  0:003    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
20:800  19:479   7. Volume:

 
...

20:836  0:002  12. Volume:
20:837  0:001    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,D9EB860B-259C-424B-BE44-6D14B4E3D483,0x28,0x64000)
41:727  20:889  13. Volume:

 
...

41:771  0:014  16. Volume:
41:773  0:001    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(5,GPT,0A90389B-0F67-4A65-A92D-312FB2AA3DE5,0x71999F00,0x2D2CE88)
62:528  20:755  Using theme 'metal' (EFI\CLOVER\themes\metal)

Share this post


Link to post
Share on other sites

Maybe no signal to monitor is because Board-ID not present in AppleGraphicsDevicePolicy like it happens here?

 

Thanks very much it, worked perfectly!  I was able to get to Desktop with the Nvidia 6x series cards where before I got no signal to monitor. I edited the plist per that link you posted to include the Board-id for iMac10,1.

 

Thanks Again!!

Share this post


Link to post
Share on other sites

 

See very long delays with Sata2. Is it broken? 

No, hangs at "Welcome to Clover"; occasional disk activity, never gets to UI.

No issues with 3021.

Share this post


Link to post
Share on other sites

No, hangs at "Welcome to Clover"; occasional disk activity, never gets to UI.

No issues with 3021.

You may use boot file from 3021 and others from latest Clover.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By STLVNUB
      Script file to clone and help build Clover, Opencore (official and unofficial) repos
      Script will create link to itself in /usr/local/bin/bob
      Wouldn't hurt to check there are no "Bob"'s there, i "Hope" there isn't.
      Then you only need to type bob. and a parameter
      "n" for NDK repo, unofficial
      "a" for ACID repo, official
      "c" for CLOVER
      It also takes "all" for ALL, if your game
       
      Easier typing bob than.....usual stuff
      Enjoy
       
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By heiza
      Ryzen 7 2700X
      ASUS Prime X470 Pro
      32GB G.Skill Ripjaws V DDR4-3200
      ASRock Phantom Gaming Vega 56
       
      My motherboard doesn’t have an option for 4G encoding. And boot modes are listed as ”Windows UEFI Mode” and “Other OS”.
       
    • By Myfz
      Hi all,

      I recently build my hackintosh, I got Win10 on my 1st disk and MacOS Catalina on the 2nd disk.
       
      Unfortunately my Win10 disk was defective and I will need to change it.
       
      I was thinking to :
       
      - Remove my Win10 disk and replace by my new one
      - Temporarily remove my MacOS Disk (Clover)
      - Reinstall Win10 on my new disk
      - Put back my MacOS Disk

      I believe clover will still start, and I will still be able to boot on the new Win10 disk, what do you think ?

      Thank in advance for your help,
      regards
    • By blackosx
      Do you want to quickly find your boot log, or ever wanted to know which version of bootloader is installed on your disk(s), had the need to dump your BIOS from OS X, just curious about your own system setup or been asked to provide your setup information to others when asking for assistance?
       
      DarwinDumper is a useful collection of readily available tools, and scripts wrapped in an application framework giving you a convenient method to quickly gather a system overview of your hack or Mac. And rest assured that enabling the privacy option will mask sensitive data like the IOPlatformSerialNumber, IOPlatformUUID, IOMACAddress(s), USB Serial Number(s), SystemSerialNumber, serial-number, fmm-mobileme-token-FMM, MLB and ROM efi vars and CustomUUID in the dumped files and report.
       
      Current Release Version: 3.0.4, though latest beta DarwinDumper_v3.1.0b6


      The system dumps are saved to a folder or your choice, but defaulting to the same directory as the main application. You can choose to setup a symlink to make it simple to run DarwinDumper from the Terminal.
       
      There is an option to create an html report showing a complete overview of the dumps. This report will mostly just contain the text dumps as you'll find in the main dump directory, but for some dumps there is extra processing to try to present the information in a better way. For example, the Disk Partitions and Unique ID's dump will show a visual map of the disk layout, and the DMI Tables (SMBIOS) dump will show the data split by table type.
       

       
      Note: The html report does not contain all files from a complete dump so if seeking assistance for a problem and you wish to send someone a DarwinDump then you will want to send the complete dump directory and not just the .html report file.
       
      The following can be read and dumped by DarwinDumper:
      - ACPI tables.
      - Audio codec and further info.
      - Boot loaders and configuration files.
      - CPU info.
      - Device-properties.
      - Disk partition structure / info.
      - Disk sectors (hex).
      - DMI (SMBIOS).
      - EDID.
      - I/O Kit Registry.
      - EFI Memory Map.
      - EFI vars (some).
      - Kernel information
      - Kexts - (list of currently loaded kexts).
      - Memory.
      - NVRAM (both Apple specific and UEFI firmware variables).
      - SMC Keys.
      - LSPCI (PCI vendor & device codes) dumps.
      - Power (Sleep/Hibernate) settings.
      - RTC.
      - System Profiler.
      - System BIOS.
      - System Log(s).
      - Video BIOS.
       
      License:
      DarwinDumper is licensed under GNU General Public License, version 3.0 (GPLv3).
       
      Tools included:
      AnalyseVBIOS
      Copyright: Not Known. License: Not known Source: http://www.insanelymac.com/forum/topic/211294-information-on-vesa-modes-in-atinvidia-bios/   AppleIntelInfo Copyright: © 2012-2017 Pike R. Alpha. All rights reserved. License: Creative Commons Attribution-NonCommercial https://github.com/Piker-Alpha/AppleIntelInfo   atomdis Copyright: Michael Larabel @ Phoronix.com License: GPL Version 2 Source: http://www.phoronix.com/scan.php?page=article&item=amd_atombios_dumper   bgrep Copyright 2009 Felix Domke <tmbinc@elitedvb.net>. All rights reserved.   Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:      1. Redistributions of source code must retain the above copyright notice, this list of       conditions and the following disclaimer.      2. Redistributions in binary form must reproduce the above copyright notice, this list       of conditions and the following disclaimer in the documentation and/or other materials       provided with the distribution.   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.   The views and conclusions contained in the software and documentation are those of the authors and should not be interpreted as representing official policies, either expressed or implied, of the copyright holder.   Source: https://github.com/tmbinc/bgrep   bdmesg Copyright 2010 by Islam M. Ahmed Zaid. All rights reserved. License: GPL Version 2 Source: http://forge.voodooprojects.org/p/chameleon/source/tree/HEAD/trunk/i386/util/bdmesg.c   cmosDumperForOsx Created by rafirafi, revised extensively by STLVNUB License: Information not available Source: http://www.projectosx.com/forum/index.php?showtopic=2432&st=0&p=21522&&do=findComment&comment=21522   csrstat Created by Piker-Alpha Copyright: © 2015-2017) by Pike R. Alpha License: Information not available Source: https://github.com/Piker-Alpha/csrstat   dmidecode http://www.nongnu.org/dmidecode/ License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2488   dumpACPI Created by blackosx. Idea taken from PHPdev32's MacIASL. Source: https://bitbucket.org/blackosx/dumpacpi   edid-decode Created by Adam Jackson, revised by Andy Vandijck License: Information not available Original Source: http://cgit.freedesktop.org/xorg/app/edid-decode Revised Source: http://bit.ly/1qAzqxb   fdisk440 Apple Computer, Inc. License: APSL v2.0 Source: http://forge.voodooprojects.org/p/chameleonApplications/source/tree/HEAD/trunk/fdisk.tproj   FirmwareMemoryMap script Amit Singh (showbootermemorymap) License: Information not available Source: http://www.projectosx.com/forum/index.php?showtopic=2447&st=120&p=19329&&do=findComment&comment=19329   flashrom http://flashrom.org/Flashrom License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2485&view=findpost&p=40285   getcodecid Copyright © 2012 AnV Software. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/285277-getcodecid-command-line-tool-to-detect-codec-id/   getdump Created by fassl?, modifications by Slice and AutumnRain? License: Information not available Source: https://svn.code.sf.net/p/voodoohda/code/tranc/getdump.c   gfxutil Copyright 2008 mcmatrix. All rights reserved. License: Information not available http://forum.netkas.org/index.php?PHPSESSID=q2isd338ihjjpcgbng7tne08pdv7tr4f&topic=64.0 Source: https://dl.dropbox.com/u/222155/gfxutil_source.zip   iasl Copyright © 2000 – 2014 Intel Corporation. License: Information not available Source: https://github.com/acpica/acpica   ioregwv Apple Computer, Inc. License: APSL v2.0 Source: https://bitbucket.org/blackosx/ioregwv   lzma Copyright © 2013 Igor Pavlov. License: GNU Lesser General Public License Source: http://www.7-zip.org/sdk.html   lzvn Copyright: © 2014 Apple Computer, Inc. All rights reserved. License: APSL Credit: Piker-Alpha, Andy Vandijck, MinusZwei. https://github.com/Piker-Alpha/LZVN   MacGap2 Created by Tim Debo. All rights reserved. License: MIT Source: https://github.com/MacGapProject/MacGap2   nvram Apple Computer, Inc. License: APSL v2.0 Source: https://bitbucket.org/blackosx/nvram   oclinfo Copyright © 2009 cmf License: GPL Version 2 Source: http://www.insanelymac.com/forum/topic/170796-opencl-info/   pciutils driver (DirectHW.kext) DirectHW is Copyright © 2008-2010 coresystems GmbH License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2480   pciutils lspci Copyright © 1997--2008 Martin Mares License: GPL Version 2 Source Code: https://kernel.googlesource.com/pub/scm/utils/pciutils/pciutils.git/+/master   Macpmem driver (Macpmem.kext) Copyright © 2007-2011 Volatile Systems. Copyright 2013-2014 Google Inc. All Rights Reserved. License: GPL Version 2 Source Code: https://github.com/google/rekall/tree/master/tools/osx/MacPmem]https://github.com/google/rekall/tree/master/tools/osx/MacPmem   RadeonDump Created by Dong Luo. Copyright 2008. All rights reserved. Modified by Andy Vandijck License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   radeon_bios_decode Created by Dong Luo. Copyright 2008. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   smbios-reader http://www.nongnu.org/dmidecode/ License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2208   SMC_util3 Copyright © 2006 devnull  License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2447&view=findpost&p=23230   VoodooHDA.kext Created by fassl?, modifications by Slice and AutumnRain? License: https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h]https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h Source: https://sourceforge.net/p/voodoohda/code/HEAD/tree/]https://sourceforge.net/p/voodoohda/code/HEAD/tree/   x86info Written to succeed CPUID by Phil Karn (KA9Q). Contributed to by various people. OS X compatability by Slice License: GPL Version 2 Original Source: https://github.com/kernelslacker/x86info Revised Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2447&view=findpost&p=41134  
       
      Running DarwinDumper from the command line:
      From Terminal, you can initiate DarwinDumper by running the following script directly.
       
       
       
      /DarwinDumper.app/Contents/Resources/public/bash/script.sh To help with this, the UI has a Symlink option which you can click to create a symbolic link which points to the above script. DarwinDumper can then be subsequently run from the command-line by loading a new Terminal window and typing darwindumper followed by return.

      Credits (in alphabetical order):
      Adam Jackson, Amit Singh, Andy Vandijck, Apple Inc., arsradu, bcc9, blackosx, cmf, DieBuche, dmazar, Dong Luo, droplets, ErmaC, Felix Domke, Google Inc., Intel Corporation, InsanelyDeepak, JrCs, Kabyl, Kynnder, Martin Mareš, mcmatrix, Michael Larabel, Mickey1979, phcoder, Phil Karn, Piker-Alpha, rafirafi, гык-sse2, Slice ,sonotone, STLVNUB, THe KiNG, Trauma, Volatile Systems, xsmile, !Xabbu.
       
      DarwinDumper was originally inspired as an open project by Trauma, it has remained an open project and please keep it an open project, so if you make any changes or additions to it then please share your work here.
       
      Please report any feedback, requests or bugs.
       
      Please note:
      DarwinDumper v3 requires OS X 10.9 and newer to run in the Finder, though it should work from the command line okay on older OS versions.

      The following link retains the download for v2.9.9.2 for older OS versions.

      DarwinDumper Download
×