I came back after a while and updated osx to 10.13.4 and did security update 2018-001 and now usb 3.0s are not working anymore for usb 3.0 drives(working with 2.0s tho) , is there a way to fix it? And if so does this happen every update?
am running sierra on a optiplex 780 with a pny gt 710. I followed a step by step guide here. My machine boots fine and actually shows that the pny 710 is recognized I have attached a link with proof. My issue is when I am doing anything that relates to video it artifacts and slows alot. I understand that this is a cheap graphics card but from what I read online it seems like the other hackintoshes dont have this issue with this card. I am wondering if you have had any similar problems or solutions to this. I also have attached my config file. I asked around on reddit and they said this could be related to the qe/ci. I am pretty new at this so I don't know how to enable this. I have installed the web drivers for 10.12.6 and that hasnt changed anything.
I have a Mac Mini 2006 (upgraded) with Intel GMA950 graphics, running MLPostFactor 10.8.5. It is connected to an ASUS VS197 LCD panel using DVI-D. This is natively a 1366x768 panel that is recognized and works fine.
However, the other choices for resolution are 4:3 800x600 and 1024x768, and then the oddballs 832x624 and 1360x768. None of these are useful as a low-resolution widescreen for gaming or watching DVD content. Specifically I want to get access to 848x480 or 854x480, and also 1024x576. SwitchResX makes these choices available, but it doesn't work with a "full screen" game, presumably because the game directly queries OSX Display to get a list of valid resolutions and SwitchResX is bypassing that system instead.
So the solution is obvious: buy a new computer pull the monitor's EDID data, hack it to enable new resolutions, and then tell OSX to use this custom EDID instead of the one retrieved from the monitor.
Following the steps of the EDID injection guide, here is where I am:
* Retrieve EDID, DisplayVendorID etc from ioreg.
00 FF FF FF FF FF FF 00 04 69 F2 19 24 94 00 00 31 16 01 03 80 29 17 78 EA F5 45 A4 55 50 9E 27 0F 50 54 BD EE 00 81 C0 01 01 01 01 01 01 01 01 01 01 01 01 01 01 66 21 56 AA 51 00 1E 30 46 8F 33 00 9A E6 10 00 00 1E 00 00 00 FD 00 32 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 41 53 55 53 20 56 53 31 39 37 0A 20 20 00 00 00 FF 00 43 43 4C 4D 54 46 30 33 37 39 32 34 0A 00 F1
* Use an EDID editor to enable new 848x477 and 1024x576 resolutions. (Verify with an online EDID tool, and compare to the previous version)
00 FF FF FF FF FF FF 00 04 69 F2 19 24 94 00 00 31 16 01 03 80 29 17 78 EA F5 45 A4 55 50 9E 27 0F 50 54 BD EE 00 81 C0 4B C0 4B CA 4B CF 61 C0 61 CA 61 CF 01 01 66 21 56 AA 51 00 1E 30 46 8F 33 00 9A E6 10 00 00 1E 00 00 00 FD 00 32 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 41 53 55 53 20 56 53 31 39 37 0A 20 20 00 00 00 FF 00 43 43 4C 4D 54 46 30 33 37 39 32 34 0A 00 47
* Create a new subfolder and plist within /System/Library/Overrides/Display/ containing the new EDID string and monitor name.
Now the problems begin. Even though the plist file is being read (which I know because the Monitor Name has changed in Displays), the custom EDID is not being used. When I dig into IORegExplorer I am able to come up with AAPL00,EDID string and it is the unmodified one read from the monitor. I even tried a plug-and-unplug while OSX is running, and also tried to reset the SMC and NVRAM, but no dice.
Do I need to start digging into DSDT hacking? Is the Intel driver pulling down EDID during boot and I need to override it somewhere else? What am I missing here?
Hello, I've successfully installed macOS Sierra (10.12.5) on my Lenovo Thinkpad x220i (2011).
I followed the x220 mcdonnelltech guide which I had to remove AppleIntelHD3000GraphicsGLDriver.bundle kext as it prevented the os from booting up. Everything is working fine except the brightness (which I fixed via the guide) and QE/CI is not working.
The dock is not transparent and images are failing to load in screensaver and I'm experiencing lags/delay in launchpad.
I'm using all of the stock Intel graphics kexts except AppleIntelHD3000GraphicsGLDriver.bundle.
How do I enable full QE/CI acceleration in Intel HD 3̶0̶0̶0̶?
I believe that it could be achieved if I manage to get AppleIntelHD3000GraphicsGLDriver.bundle working but, I absolutely have no idea how (It shows white apple logo with a loading bar that is stuck on 0%, verbose mode shows nothing related to the problem. ).
I also tried various patched Intel graphics kext which had no effects .
The problem may lie in the config.plist, dsdt or the bios setting.
Intel HD 3̶0̶0̶0̶ Graphics 384mb
Vendor: Intel (0x08086)
Device ID: 0x0116
Revision ID: 0x0009
Resolution: 1366 x 768
Intel® Celeron® CPU 847 @ 1.10GHz
smbios: MacBook Pro 8,1
clover: config.plist and dsdt are from the mcdonnelltech guide
Any help would be really appreciated!
Update: I do not have Intel he 3000, I have Intel HD instead. I will be trying to create my own working dsdt, thank you for the clarification.
Opa galera, boa noite! Beleza? Então.. vou tentar ser o mais explicativo possível. Fiz a instalação, e o sistema mostra que é a Intel HD 620, porém, estou sem aceleração, e mostra apenas 7MB. Estou utilizando o plist do Rehab, que se encontra no repositório dele.
E eu só consigo iniciar o sistema, caso eu utilize uma invalid ig-platform-id inválida, como por exemplo: 0x12345678. Caso eu utilize a ig-platform-id 0x19160000, tenho o erro a seguir:
Pesquisando, vi que isso é relacionado a um problema de DVMT, que está em 32MB, e é necessário 64MB pelo que eu entendi. Na minha BIOS, existe uma opção que CREIO que seja relacionado a isso, porém, se eu seto 32, 64 ou 128 o mesmo erro continua a aparecer.. PORÉM, se eu desabilito essa opção, mostra o erro a seguir:
Alguém poderia me dar um help com isso? Minha pasta EFI segue em anexo, caso alguém queira tirar um tempinho para dar uma olhada. Lembrando que: As kexts FAKEPCIID e FakePCIID_Intel_HD_Graphics estão em S/L/E.