Jump to content
uselessman

GUIDE: How to install Mac OS X on HP 655 notebook

1 post in this topic

Recommended Posts

This tutorial should work with all the variations listed on Hewlett-Packard's Website.

1. First of all, you need to get the iAtkos v7, which you can get from torrent websites. Any snow leopard distros (Hazard, iAtkos S) will refuse to boot, so you are stuck with leopard (However, I did not try any other leopard distros than iAtkos).

 

2. When you have burned the ISO to the disk, boot from the cd drive (press F9), and in the darwin prompt (press F8), input the following flags:busratio=20 -v. After 5-10 minutes (if all goes well) you are looking at the installation screen. Before you continue, format your hard drive with disk utility, located at the utilities menu. Choose your HDD and click on the "Partition" tab. From the dropdown menu that says "current", choose the amount of partitions you want on the disk, name the partition(s) whatever you please, and press apply.

 

3. Choose the partition you want the os to be installed, and press continue, and from the next screen, choose customize.

Make sure the following options are ticked:

Bootloader>Xiezhy booter

X86 Patches>/Extra, DSDT, Decrypters>AppleDecrypt, Disabler, Kernel>Voodoo 9.7.0

Drivers>System>Sata/Ide>ATI Sata/Ide PS/2 Mouse/keyboard>Apple PS/2 Driver, Laptop battery, Network>Wired>Realtek (tick the main tab)

 

After you have ticked all the above options, choose Done, and then install.

 

4. After a while you should see a screen with a large green tick. Click restart. Remove the dvd from the drive once you see the "press esc for startup options" screen.

 

5. Press enter when you see the gray screen with the choise to boot from cd or HDD, choose the partion with os x on it.

 

6. You should see the gray apple logo for a minute, after that you should see the welcome screen. Go trough it. You should be on your os x desktop.

 

 

What works after installation

-Ethernet (requires a restart to work, should the computer "sleep" or cable get unplugged during use.)

-Battery indicator (time and percentage)

 

What does not work:

-Wireless (use os x supported usb dongle)

-Audio (Use os x supported usb dongle)

-QE/CI (Unsupported video card)

-VGA and HDMI ports (no video)

-Sleep (screen stays on, wired network stops working after "waking up"

-Shutting down and rebooting work sometimes, sometimes get stuck and require a forced shutdown.

 

Optional: To toggle full native resolution, press f8 on the boot loader, and boot with the following flag: "Graphics Mode"="1366x768x32". If all goes well, you should see mac os x desktop with full resolution. You can (and should) add the graphics mode flag to the com.apple.boot.plist file if it works. NOTE: Should you enter the boot flags in the com.apple.boot.plist file, you need to press f8 twice and then enter on the bootloader, because otherwise it will not read the com.apple.boot.plist for whatever reason.

 

You should also turn sleeping and shutting the hard drives off from the energy options.

 

That's it! You should now get some ice tea and mud cake. You deserve it. Hope this helps someone! :wink2:

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771     Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover UEFI in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install Sierra and boot into system!   --Install Clover UEFI and replace with my folder  CLOVER POST INSTALLATION.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edit... Run it RunMe.app   --DSDT My DSDT DSDT.ASUS H61M-A MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -EHCx -LPC -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF Clear NVRAM, Purge and Kextcache
          --FakeSMC http://www.hwsensors.com/releases --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771     --Create a bootable copy of macOS Sierra   http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra   http://diskmakerx.com/   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder    CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder   CLOVER.zip   --Nvidia WebDriver Sierra   http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/   --Nvidia WebDriver High Sierra   http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/   --Cuda   http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   Now you need a fine tune!   --DSDT DSDT.GA H97M-D3H MaLd0n.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF --Power Management   Use "plugin-type"=1 in DSDT, SSDT or Clover config.plist   --Brightness   Install .app, select the required permission and reboot. Work in F1 / F2 keys! NativeDisplayBrightness.app.zip https://github.com/Bensge/NativeDisplayBrightness/releases *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install  
      --FakeSMC
        https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/   --Audio   https://github.com/vit9696/AppleALC   --USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   --LAN   http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   --Install Follow my tutorial and use my Clover folder http://www.insanelymac.com/forum/topic/323052-guide-sierra-high-sierra-on-intel-5-6-7-8-and-9-chipset-series-nehalem-sandybridge-ivybridge-haswell-broadwell/ CLOVER Install.zip   --Post Install --Install Clover bootloader and replace with my folder CLOVER Post Install.zip   Bingo!   Now you need a fine tune! DSDT time!   If you need edited DSDT... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer IORegistryExplorer.app.zip -Run it, post files generate in your desktop RunMe.app     -DSDT bios F23 My DSDT  DSDT.MaLd0n GA X99-UD3P.zip   -Patches -FIX ERRORS AND WARNINGS -HPET -SATA -sSATA -DMAC -SLPB -DARWIN -LPC -XHCI -EHCI -PLUGIN TYPE -ALZA to HDEF -HDEF -RTC -IRQs -SBUS -BLC0 -BUS1 -MCHC -ALS0 -IMEI -SHUTDOWN -LAN -SPSR -EC -PNLF -HDMI


      e.g

       
      -Clover https://sourceforge.net/projects/cloverefiboot/files/Installer/ -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek -Audio https://github.com/vit9696/AppleALC -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads -LAN https://github.com/Mieze/IntelMausiEthernet   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, nmano and many, many, many others!   We're all here to have fun and learn from each other!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771  
      -Install, check here 
      http://www.insanelymac.com/forum/topic/323052-guide-sierra-high-sierra-on-intel-5-6-7-8-and-9-chipset-series-nehalem-sandybridge-ivybridge-haswell-broadwell/
       
      -Clover Folder 
      CLOVER.zip
       
      -DSDT 
      DSDT.MaLd0n Supermicro X10DAI.zip
       
      -DSDT Patches 
      -FIX ERRORS AND WARNINGS -HPET -SATA -sSATA -DMAC -SLPB -DARWIN -LPC -XHCI -EHCI -PLUGIN TYPE -ALZA to HDEF -HDEF -RTC -IRQs -SBUS -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN #1 -LAN #2 -SPSR -WIFI -EC -PNLF -HDMI -NVME -Geekbench 

       
      -SS 


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders! Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, MMido and many, many, many others!   We're all here to have fun and learn from each other!  
    • By Donw35
      I have a HP 840 G3 that was donated to me to Hackintosh, currently running High Sierra 10.13.6. This should work for the 840 G2 and you may even have more luck with the 840 G1 with the WiFi that PCIe.
       
      My method to install OS X on the SSD from a working real Mac via SSD to USB converter. I then install Clover and add my kexts ad set the config.plist
       
      Not working
      SD Card reader
       
      Working
      Video - screen looks better in OS X then it does in Windows 10
      VGA port
      WiFi and BlueTooth working OOO using the below hack
      Battery status with Rehabman's DSDT patch
      Brightness controls
      Sounds - using VoodooHDA
      Microphone - cannot turn it off or mute
      Keyboard backlight - controlled though BIOS anyways
      touchpad - using VoodooPS2Controller
      USB3 - this laptop has two on board only and I haven't test them using the docking station
      USB3.1 C
      Ethernet - using IntelMausiEthernet
      Sleep - kind of, closing the lid doesn't go to sleep but goes to sleep over time.
       
      Not tested
      This laptop does not have a Webcam - enterprise model.
      Display port
      Finger Print device
       
      For me what keeps this from being a day to day usable laptop (Mac Book) is the WiFi + Bluetooth, not having battery percentage could be an issue later though.
       
      Clover_folder for those that want to play along.
       
       

      HP_840_G3_Clover.zip
×