Been browsing the forums for a while and trying to setup a Mojave 10.14.3 with the following hardware:
Motherboard: ga-z370n-wifi - BIOS revision F5
CPU: Intel i7-8700k
RAM: G.Skillz Trident Z 32gb (2x 16gb) DDR4-3000
HDD: Samsung 860 Evo M.2 1 TB
PSU: Corsair RX750
USB used is 2.0
I've run into an issue where I'm trying to load the installer, but I am getting a panic error before getting to the Grey install screen.
Followed this guide:
See attached Screenshot for kernel panic.
If I need to provide more info, let me know and I'll do my best to provide the info
Also i'm not sure how to get the panic logs since I don't get shell unless I boot into single-user mode. (That of which I noticed a panic error whenever I try to run diskutil from single user mode)
Innanzitutto vorrei scegliere all'avvio del PC quale dei sistemi operativi far partire. Ho fatto la procedura con "moltebestie" (in ogni tipo di opzione nel quick start) ma all'avvio devo sempre inserire la pennetta per poter scegliere Sierra.
Secondo problema è che mi mancano i vari driver, scheda video... E, cosa strana, ho notato che nelle informazioni di sistema mi da che ho 4 GB di Ram invece che 8.
Ho comprato da poco un Acer Aspire 5750G e girando su internet ho trovato la cartella efi che garantiva quasi tutto funzionante perfino il wifi (https://github.com/zipippino/HighSierraAspire5750G).
Allora felicissimo installo macOS e a parte incappare in errori stupidi, riesco a fare tutto, ma quando sono riuscito ad installare clover Legacy e sostituendo la roba con la 'mia' efi clover si avvia ma macOS no, semplicemente non carica (si nota anche pk la spia dell'hdd che dice se è in attivitá è spenta.
Qualcuno può aiutarmi?
I think, at this point converting to hfs+ is out of the question, Apple has been pushing the apfs file policy very aggressively, so does anybody solved the missing "Boot macOS from Mojave " (this last word may be different). I have installed the latest clover in HDD and USB, but I can only see 3 Mac Os related tabs but not the one for actually loading the Mojabe mac OS. I updated high sierra to Mojave and everything went fine. My laptop (Dell E6530) booted up normally, Mojave system loaded up, I finished the setup and spent sometime exploring. I updated clover to the latest version and turned of machine. When I restarted, I noticed Clover did not have an option for booting into the system like High sierra had it. I tried adding the apfs.efi or the ApfsDriverLoader-64.efi driver to the clover efi folder in the HDD and also tried with a USB clover installation and the result is the same: No boot option for the Mojave OS. I used the recovery option and I was able to explore the partion where the system is located but that´s as far as I could go. Does anybody has an idea of what happened?
First post, thank you all for any help offered. I am coming from a certain commercialized hackintosh community - after seeing such amazing vanilla installs and reading of the talent here, I decided to have a go at not using such software methods. And I immediately got myself into a predicament
I successfully upgraded from Mavericks to Mojave 10.14.2 but decided to start over and do a clean install because my Vega Frontier was not playing OOB even with Lilu & whatevergreen - and there was a lot of 'code junk' Clover barfed at boot from this 'commercialized software'.
I created Mojave USB installer from scratch using the latest Clover, it worked fine, got me to the Mojave install screen.
For reasons unknown to me, I decided for one last ditch effort to see if I could get my already installed Mojave playing nicer - instead of starting over clean. So I installed the latest Clover on my Mojave SSD, (it had a Clover version YEARS ago when I last installed Mavericks) and I replaced the EFI file with the kexts and config of my USB EFI file because I figured, since the USB installer launched, it was all good to go.
Now nothing boots after BIOS. Not my Mavericks drive, Mojave SSD, nor my USB Mojave Installer. They all hang right where Clover usually launches. I look at my USB lights and nothing flashes...
The only drive I can use is Windows 8.1 (my testing environment) and not from Clover. That's just booting windows up without any HD's plugged in.
Is there a way to rescue my predicament? I don't have another Mac computer and CloverConfig only runs on Mac. Is there a way to fix the USB from Windows? Thanks!