Catalina update 10.15.4 without issues, make sure you update your kexts before hand and clover 5107
Catalina update 10.15.3 without issues, make sure you update your kexts before hand.
Catalina update 10.15.2 without issues, make sure you update your kexts before hand.
Catalina update 10.15.1 without issue although you may have to make sure clover boots from the right partition.
HP 840 G2/G3, working with OS X 10.15 Catalina, for this to work you will need the SSDT-ECUSBX.aml and place that EFI/CLOVER/ACPI/Patched.
Make sure you remove Remove all patches about renaming acpi of EC or H_EC, revert all ACPI renaming in ACPI DSDT.
My method to install OS X on the SSD from a working real Mac via SSD to USB converter. I then install Clover and add my kexts and set the config.plist
SD Card reader
Finger Print device
Video - screen looks better in OS X then it does in Windows 10
WiFi and BlueTooth working OOO using the below hack
Battery status with Rehabman's DSDT patch
Sounds - using VoodooHDA
* Microphone - cannot turn it off or mute
Keyboard backlight - controlled though BIOS anyways
touchpad - using VoodooPS2Controller
USB3 - this laptop has two on board only and I haven't test them using the docking station
Ethernet - using IntelMausiEthernet
Sleep - kind of, closing the lid doesn't go to sleep but goes to sleep over time.
Web Cam, works but I covered it up.
In this machine I successfully installed macOS Sierra 10.12.6 (16G29). But I'm getting an error in verbose mode like some contagious file. Also I'm getting an error of shutdown. I have attached the screenshot of the same. I have also recorded the video and its url is :
You may see it at 0:40 seconds. Later on when whole process get completed then I get an error of shut down "You shut down your computer because of a problem." Again and again I'm getting this error on every restart. If I'm somewhere wrong for any kext or any other thing for that, here is my EFI folder (https://drive.google.com/open?id=1k-MSKSHXK9TL3WOBPZj6O789jBau7kWx). Also I have attached my config.plist file. Audio is working, but didn't recognised the device. About this Mac is also showing details properly.
Please help me out it would be grateful and appreciated
Hi, I want to install MacOS Catalina on my laptop.
I was installed MacOS Mojave previously but i had a lot of problem, for example my wifi's card (Dell DW1820A) had a problem: My pc sometimes doesn't boot up or pc after some minutes crashed or slowed.
Now i want to try again to install macOS.
this is my spec:
CPU: i7 6500U with HD520
SSD: 500GB SSD Samsung
Wifi & Bluetooth: Dell DW1820A (Bluetooth: BCM2045A0) (Wifi: BCM94350ZAE)
Ethernet: Realtek 8100
Attached in this thread, my old clover configuration created by me (CLOVER OLD) and clover with Wifi driver (CLOVER) created by Hervè (I had asked help at insanelymac's community)
P.S SORRY FOR MY BAD ENGLISH.
Thanks in advance
Hi, i can someone help me with installing mac OS Mojave on my HP ENVY - 15-as102na? I have an imac to use for setting up my usb & installing MacOS Mojave.There are various kext files etc that i'm not sure about and need some help as some are hardware specific. I tried previously but got stuck on an apple logo and couldn't get past that, and tried today and had problems with Clover.
Once i get mac os on my 128gb m.2 ssd ( which i'll upgrade to either a 256gb or 512gb depending on how well this hackintosh works)
I have a free 2.5" inch hdd bay where i'd like to install windows on in the future.
I think i may have to replace my wireless card ( based on a few google results) which i'm fine with as long as i can see it working without just so i know i won't waste money Specs: Cpu: i5 7200u GPU: HD 620 8GB ram Wifi card- Intel Wireless 7265 ( Intel® 802.11ac (2x2) ) Motherboard - HP 81D2 & BIOS version is f.56