Jump to content
  1. faizfaris9

    faizfaris9

  2. Allan

    Allan

  3. talsid

    talsid

  4. BettyBoo

    BettyBoo

  5. iFIRE

    iFIRE

  6. -Pingu-

    -Pingu-

  7. smagin

    smagin

  8. fantomas1

    fantomas1

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By wmchris
      This tutorial has been updated on GITHUB to 10.14 and 10.15
      the tutorial on insanelymac got too fragmented for a simple forum thread and will not be updated, but still be used for discussion and hints, tips and tricks
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      Dell XPS 15 (9550, Version of 2016) Sierra 10.13.1 Tutorial

       

       
       
       
       
       
      Before we start:
      this installation includes real time DSDT/SSDT patching from within clover. This is pretty easy to install. But it is NOT suited for people with no or only few knowledge in Hackintosh Systems. If you only know how to copy commands in your shell and you dont know what they're doing, then stop the tutorial and revert to windows or buy a real mac. Even if you get it running: this system is not failsafe and will be broken multiple times in its usage time, where you have to fix it without a tutorial.
      Optional steps are marked in GREEN, System dependent steps are BLUE

      English is not my mother-tongue and i'm writing this without proof reading, so please forgive my bad spelling
      If you've questions or something doesn't work: first check if you've done all steps of this tutorial! If yes: please read the whole thread (doesn't matter how long it is) before asking to prevent multiple questions. Additionally do a search in google and this forum.


      Credits:
      Many knowledge of "how to hackintosh a dell in the first place" by the tutorial of @Gymnae http://www.insanelymac.com/forum/topic/319766-dell-xps-9550-detailled-1011-guide/
      Using many kexts and solutions from @RehabMan

      What's not working:
      Hibernation (works somehow, but high chance to destroy your whole data), Sleep works fine! SD-Card reader Killer 1535 Wifi (rarely used, need replace) nVidia Graphics card (Intel works) FileVault 2 (full HDD encryption) Requirements:
      one working MAC OS X Enviroment 16GB USB Stick (larger is sometimes not bootable and/or requires advanced partitioning) MacOS High Sierra 10.13.1 installation file from the app store (redownload, just in case) Knowledge in PLIST editing USB Harddrive for backup - you'll loose all data on your computer! Step 1: Prepare Installation
      Use the existing Mac to download the Sierra installer from the App Store and create a bootable USB stick with CLOVER. You can do this with the App "Pandora's Box" of insanelymac (use google for download link), which is pretty easy to use.
      Optional: check if your SSD can be switched to 4k sector size. This prevents NVMe corruption. See https://github.com/wmchris/DellXPS15-9550-OSX/blob/10.13/4k_sector.md
      After you've finished you need to download the Dell XPS 15 specific configurations for clover.
      Link: https://github.com/wmchris/DellXPS15-9550-OSX/archive/10.13.zip and unzip this file or checkout git directly:
      git clone https://github.com/wmchris/DellXPS15-9550-OSX.git You only need the folder 10.13, you can delete the 10.11. I'll refer to this folder by "git/"
      Now mount the hidden EFI partition of the USB Stick by entering
      diskutil mount EFI Inside the terminal. Mac OS will automaticly mount the EFI partition of the USB stick, but just in case: make sure it really is
      Overwrite everything in the CLOVER folder of the partition EFI with the content of git/10.13/CLOVER.
      If your PC has a Core i5 processor, you'll have to modify your config.plist in EFI/EFI/CLOVER/: search for the Key ig-platform-id: 0x191b0000 and replace it with 0x19160000.
      If you could use the 4k sector patch, replace the config.plist with the 4kconfig.plist. 
      If you use a hynix device and you didnt do the 4k sector switch, you'll have to add the following patch to your config.plist
      <key>Comment</key> <string>IONVMeFamily Pike R. Alpha Hynix SSD patch</string> <key>Disabled</key> <false/> <key>Find</key> <data>9sEQD4UcAQAA</data> <key>Name</key> <string>IONVMeFamily</string> <key>Replace</key> <data>9sECD4UcAQAA</data> Go into the EFI Configuration (BIOS) of your Dell XPS 15:
       
      Also disable the SD-Card Reader to reduce the power consumption drastically. Insert the stick on the Dell XPS 15 and boot it up holding the F12 key to get in the boot-menu and start by selecting your USB-Stick (if you've done it correctly it's named "Clover: Install macOS Sierra", otherwise it's just the brandname of your USB-Drive). You should get to the MacOS Installation like on a real mac. If you're asked to log-in with your apple-id: select not now! Reason: see Step 5.


      Step 2: Partition and Installation
      INFORMATION: after this step your computer will loose ALL data! So if you haven't created a backup, yet: QUIT NOW!

      Dont install macOS yet. Select the Diskutil and delete the old partitions. Create a new HFS partition and name it "OSX". If you want to multiboot with Windows 10, then you'll have to create a second partition, too (also HFS! Dont use FAT or it will not boot! You have to reformat it when installing Windows). Make sure to select GUID as partition sheme.
      Close the Diskutil and install OSX normally. You'll have to reboot multiple times, make sure to always boot using the attached USB stick. So dont forget to press F12. After the first reboot you should see a new boot option inside clover, which is highlighted by default. Just press enter. If you only see one, then something went wrong.


      Step 3: Make it bootable
      After a few reboots you should be inside your new macOS enviroment. You can always boot into it using the USB stick. Remove the USB drive after successful bootup. Enter
      diskutil mount EFI in your terminal, which should mount the EFI partition of your local installation.

      install git/Additional/Tools/Clover_v2.4k_r4003.pkg. Make sure to select "Install Clover in ESP". Also select to install the RC-Scripts. This should install the Clover Boot System. Now copy everything from git/10.13/CLOVER to EFI/CLOVER like you did before by creating the usb stick. (if you had to modify the config.plist in step 1, do it here, too). Your system should be bootable by itself. Reboot and check if your system can boot by itself.

       
      Step 4: Post Installation
      Because all DSDT/SSDT changes are already in the config.plist, you dont need to recompile your DSDT (albeit i suggest doing it anyway to make your system a lil bit more failsafe, see gymnaes El-Capitan tutorial for more informations). So we can skip this part and go directly to the installation of the required kexts. Open a terminal and goto the GIT folder.
      sudo cp -r ./Post-Install/LE-Kexts/* /Library/Extensions/ sudo mv /System/Library/Extensions/AppleACPIPS2Nub.kext /System/Library/Extensions/AppleACPIPS2Nub.bak 2> /dev/null sudo mv /System/Library/Extensions/ApplePS2Controller.kext /System/Library/Extensions/ApplePS2Controller.bak 2> /dev/null sudo ./AD-Kexts/VoodooPS2Daemon/_install.command Now you'll have to replace the config.plist. Because you'll install modified kexts you'll HAVE TO replace the config.plist in your installation. Otherwise your PC will not boot anymore.
      diskutil mount EFI replace EFI/CLOVER/config.plist with git/Post-Install/CLOVER/config.plist. Again: if your PC has a Core i5 processor, search the config.plist for the Key ig-platform-id: 0x191b0000 and replace it with 0x19160000.

      OPTIONAL (in case you've audio problems):
      AppleHDA has some problems after Wake-Up. You'll have to plug in a headphone to get your speakers working again. You can use VoodooHDA instead, which breaks the headphone jack most of the time, but makes the rest much more stable.
      sudo rm -r /Library/Extensions/CodecCommander.kext sudo rm /EFI/EFI/CLOVER/ACPI/patched/SSDT-ALC298.aml then remove from your config.plist from the key "KextsToPatch" the elements "AppleHDA#1" to "AppleHDA#7". Install the package: git/Post-Install/AD-Kexts/VoodooHDA-2.8.8.pkg
      i also suggest moving some of the kext from EFI/CLOVER/kexts/10.13 to /Library/Extensions. It's just more stable.
      Finalize the kext-copy by recreating the kernel cache:
      sudo rm -rf /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache sudo rm -rf /System/Library/PrelinkedKernels/prelinkedkernel sudo touch /System/Library/Extensions && sudo kextcache -u / sometimes you'll have to redo the last command if your system shows "Lock acquired".
      OSX 10.12.2 removed the posibility to load unsigned code. You can enable this by entering
      sudo spctl --master-disable If you're using the 4K monitor, you'll have to copy the UHD enabling kexts to your clover directory:
      sudo cp ./Post-Install/AD-Kexts/UHD-Kexts/* /EFI/EFI/CLOVER/kexts/10.13/ To enable GPU acceleration: Edit your clover config file again and remove the following block from it:
       
      To prevent getting in hibernation (which can and will corrupt your data), just set the default sleep mode to "suspend to ram" (sleep) instead of "suspend to disk" (hibernation)
      sudo pmset -a hibernatemode 0 To get HDMI Audio working:
      Search for your Boarrd-ID in the config.plist and open /S/E/AppleGraphicsControl.kext/contents/plugin/AppleGraphicePolicy.kext/contents/info.plist with a texteditor. Search for your board-id in there and change the value of it from "Config2" to "none"
       
      OPTIONAL (alternative power management):
      the whole power management is done by intels speed step technology (HWP), which is enabled in the clover config. If you want to let OSX manage the power management, you'll have to do these steps:
      sudo cp ./Post-Install/CLOVER/ACPI/optional/SSDT.aml /EFI/EFI/CLOVER/ACPI/patched/ then open the config.plist (/EFI/EFI/CLOVER/config.plist) and change <key>HWPEnable</key><true/> to <key>HWPEnable</key><false/>.
       
      Step 5: iServices (AppStore, iMessages etc.)
       
      WARNING! DONT USE YOUR MAIN APPLE ACCOUNT FOR TESTING! It's pretty common that apple BANS your apple-id from iMessage and other services if you've logged in on not well configured hackintoshs!
      If you want to use the iServices, you'll have to do some advanced steps, which are not completly explained in this tutorial. First you need to switch the faked network device already created by step 4 to be on en0. Goto your network settings and remove every network interface.
      sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist Reboot, go back in the network configuration and add the network interfaces (LAN) before Wifi.

      You also need to modify your SMBIOS in the config.plist of Clover in your EFI partition with valid informations about your "fake" mac. There are multiple tutorials which explain how to do it like "http://www.fitzweekly.com/2016/02/hackintosh-imessage-tutorial.html".

      It's possible you have to call the apple hotline to get your fake serial whitelisted by telling a good story why apple forgot to add your serial number in their system. (aka: dont do it if you dont own a real mac). I personally suggest using real data from an old (broken) macbook.


      Step 6: Upgrading to macOS 10.13.2 or higher / installing security updates
      Each upgrade will possibly break your system!
      (Update: after the latest updates in this tutorial the system should be update-proof.) 
       
      Step 7: Fixes / Enhancements / Alternative Solutions / Bugs
      See: https://github.com/wmchris/DellXPS15-9550-OSX/blob/10.13/Tutorial_10.13_Step7.md
       
      Afterword and fixes
      as i said before: this is not a tutorial for absolute beginners, albeit it's much easier then most other tutorials, because most is preconfigured in the supplied config.plist. Some Dells have components included, which are not supported by these preconfigured files. Then i can only suggest using Gymnaes tutorial which explains most of the DSDT patching, config.plist editing and kexts used in detail and use the supplied files here as templates.
      Warning: Some people have reported multiple data losses on this machine. I suggest using time-machine whenever possible! If your device is detected as "Model Name: Apple Device", see: http://www.insanelymac.com/forum/topic/319764-guide-dell-xps-15-9550-sierra-10122-quick-installation/page-13?do=findComment&comment=2362337 If you want to save the settings of the display brightness: downgrade to clover 3899, in the never versions the nvram restore is broken. USBInjectAll is not intended for permanent use. You should check which USB are really required to be injected and modify your DSDT/SSDT. 4K Touchscreen only: Multitouch can be achieved with the driver from touch-base.com, but it's not open source - costs > 100 $ Not a bug: if you REALLY want to use the 4K Display natively and disable the Retina Mode (max 1920x1080), see: http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-retina-display-faq/macbook-pro-retina-display-hack-to-run-native-resolution.html Tutorial Updates
      27. March 2017: UHD Kexts added, replaces perl command 23. March 2017: 4k sector tutorial against NVMe corruption added   7. March 2017: Suggestion to disable the SD Card Reader for reduced power consumption 4. February 2017: Dell SMBIOS Truncation workaround added 23. January 2017: Hynix SSD fix added 31. December 2016: USB-C Hotplug Fix and USB InjectAll Removed 28. December 2016: NVMe SSDT Spoof precreated, FakeID already preset in installation config.plist. VoodooHDA added as alternative to SSDT-ALC298 patch as well as color coding in tutorial 22. December 2016: FakeSMBios added Accessories Appendix:
      The official Dell adaptor DA200 (http://accessories.euro.dell.com/sna/productdetail.aspx?c=at&l=de&s=dhs&cs=atdhs1&sku=470-abry) works completly on Sierra 10.2.2. You can use the Network, USB, HDMI and VGA. Everything is Hot-Pluggable a cheap 3rd party noname USB-C -> VGA adaptor didnt work you can charge the Dell with a generic USB-C Power Adaptor, but USB-C has only a maximum power of 100W, so it's either charging OR usage, not both. Dont forget you need a special USB-C cable (Power Delivery 3.0) for charging.
    • By dracoflar
      So you've been reading the forum on this brand new boot loader called OpenCore hoping to try it out but you take one look at the configurations PDF and take a step back in shock at the complexity! Well if you've been feeling a bit intimidated by the DOCS well you've come to the right place:
       
      OpenCore Vanilla Desktop Guide
       
      If you have any issues or suggestions please feel free to comment
       
      - Your local neighbourhood Hackintosh Slav
    • By JackBauer24
      Hello,
       
      I have installed OSx86 10.11 (El Capitan) on April 2016 on my Asus Z170 Deluxe system.
       
      For installation I used this Thread.
       
      I used it a lot and it worked well. Meanwhile I switched to Linux and I use Win10 time to time. So OSX was forgotten. Also it did not boot correctly anymore.
       
      Now I wanted to start with a fresh installation and use OSX more often again. I want to use OSX 10.13 High Sierra. Is it working on my Asus Z170 Deluxe? I have the same Hardware as of April 2016 only the graphics card was updated to a Nvidia GTX1080.
       
      My Hardware in detail: Asus Z-170-Deluxe (Bios 3801), i7-6700k, EVGA GeForce GTX 1080 SC GAMING ACX 3.0, Samsung 950 Pro/M2 NVME 512MB, HDD 4 TB)
      Can I use some of support files from the old thread for the installation (see attachment)? Can I still use  Clover 2.3k r3292 Special Edition v2 ? Or do I need a newer version?
       
      Has someone installed High Sierra successfully on the Asus Z170 Deluxe ?
       
      About some hints where to start I would be thankful.
       
      regards
      JackBauer24
       
      Z170DeluxeFiles.zip
    • By PookyMacMan
      Many users wonder why we do not support tonymac's products here at InsanelyMac. The reason is that we believe he is a commercial spin-off of the OSx86 scene, and it's not in the spirit of OSx86 to have commercial intents with development.
      These are the main reasons why we don't approve posting his material here (why he's a commercial spin-off):
       
      1. His software is not open source. This is often confused because most people equate open source software with free software. This is definitely true, but it doesn't grasp the entire scope of open source; open source also includes releasing source code for the product, which tonymac fails to do. The OSx86 community believes everything should be open source.
       
      2. The construction of his site is set up with emphasis on donation buttons and (affiliate) links to Amazon and Newegg, hinting at interests of profit.
       
      3. The intent of gaining profits is basically confirmed by marketing his projects with suggestions of donations as though he deserves it, even though his products (most notably #####) is a compilation of products/drivers developed by others (not himself) that any non-programmer could put together.
       
      4. You must pay for the tonymac software. Although this may seem reasonable considering the effort involved in building a customized installer for specific computer builds, again, it is not in the spirit of OSx86 to charge for software development, so the wiser idea would most likely be not to offer that service at all. Even though it may be nice for newbies, in my opinion it does not encourage education but rather laziness. I say this because the OSx86 movement is designed as an educational movement, where by hacking Mac OS X you can learn more about the operating system works, how computers work, etc., like how many of us do. However, the purpose of OSx86 is not a way to get a cheap Mac, which I personally believe is encouraged by tonymac's software considering it is marketed to perform a task without any sort of explanation of how it works.
       
      From another perspective: http://prasys.info/2011/01/tonymac-seriously/ This covers one of the issues brought up by developers.
       
      In two sentences: at InsanelyMac, we want to keep moral standards high and safeguard genuine developers.
      At tonymacx86 they take from others without giving credit.
       
      In order to make sure that it doesn't happen any longer, staff have now a new guideline:
       
       
    • By steamteam
      Hey everyone,
       
      after years I come back to Hackintosh. In the early days I played with ozmosis and my good old 4700k. Now I'm back and worked around a 100% working setup with enough power to get me through all my tasks like audio, video cut etc.
       
      In this short tutorial I will guide you through BIOS Settings and give you access to my EFI Folder. This I do because I haven't found anything on the web for my setup. Maybe it will help some of you. When you follow the steps you will have a perfect running Hackintosh  like I do have now  
       
      I've chosen the iMac 18,3 because of the easy integration of both Graphic Units and the support of HEVC. 
       
      Specs:
       
      CPU: Intel i7 9700k (Overclocked in Bios to 4,7 GHz)
      SMBIOS: iMac18,3 (Because of Dedicated Graphics and HEVC Intel Support)
      RAM: 32GB G.Skill Trident Z RGB DDR4-3200 DIMM CL16 (XMP Profile to 3200MHz)
      Motherboard: MSI MPG Z390 GAMING PRO CARBON (MS-7b17) <- It's the model without WLAN/Bluetooth
      Graphic Card: Sapphire RX580 Nitro+
      Bluetooth & WLAN: Broadcom Card in PCI Adapter
       
      What is working: 
       
      Almost everything! All USB Ports, Intel Power Management, Bluetooth, WLAN, LAN, Intel Graphics HEVC, Boot/Reboot, Sleep
       
      What is not working: 
       
      Facetime & iMessage (Don't need it but I will come back to this)
       
      Steps:
       
      1. Create Mojave 10.14.5 USB Drive | https://www.youtube.com/watch?v=9CZDXxKfodE&amp;t=95s | Us this tutorial or search the forum
      2. Load my EFI Folder: https://workupload.com/file/zkJ4zdQk
      3. Go into your bios and use my settings in the Screenshot I attached 
      4. Boot from USB Stick | Install Mojave | Boot into Mojave (Check other Tutorials if you don't know how)
      5. Generate Serials with Clover Configurator
      6. Happy Hackintosh Life! 
       
      Kext I use:
       
      AppleALC.kext | Needed for Sound
      BrcmFirmwareData.kext | Needed for my WLAN/Bluetooth Card 
      BrcmNonPatchRAM2.kext | Needed for my WLAN/Bluetooth Card 
      BrcmPatchRAM2.kext | Needed for my WLAN/Bluetooth Card 
      CodecCommander.kext | Fix Problems after Sleep
      CPUFriend.kext | Perfect Power Management for my CPU
      CPUFriendDataProvider.kext | Perfect Power Management for my CPU
      FakePCIID_Broadcom_WiFi.kext | Needed for my WLAN/Bluetooth Card 
      FakePCIID.kext | Needed for my WLAN/Bluetooth Card 
      FakeSMC.kext | Standard
      IntelMausiEthernet.kext | Ethernet
      Lilu.kext | Standard
      USBInjectAll.kext | To fix all USB Ports
      WhateverGreen.kext | Needed for graphics
       
       
      If you have success with my little tutorial and EFI Build let me know! Hope you reach the desktop and will be happy!
       






×