Jump to content
  1. Baio77

    Baio77

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By grisno
      Hi people,
       
      This is a preliminary installer to activate the Combo Mini PCIe Atheros AR9004WB-1NG in MacOS.
       
      I want to thank the whole community for their efforts and content provided, because without these it would not be possible to create this installer.
       
      I would appreciate comments and suggestions!!
       
      Status:
      AIRPORT : OK Atheros AR9004WB-1NG (AR9485) (168c:0032) Mini PCIe * (10.9.0+)BLUETOOTH : OK Atheros AR3012 (0cf3:3121) USB 2.0 ** (10.9.0+)AIRDROP : Not TestedHANDOFF : Not TestedCONTINUITY : Not TestedWOL : Not TestedIMESSAGE : OKFACETIME : OKICLOUD : OKAPPSTORE : OK
      Known Issues:
       
      - Partial support with a maximum speed of 11Mbits (10.9.0+) *
      - Don't support Bluetooth Power Off/On by Software (10.9.0+) **
       
      Sources:
       
      Insanelymac
    • By grisno
      Hi people,
       
      This is a preliminary installer to activate the Combo Mini PCIe Atheros QCWB335 in MacOS.
       
      I want to thank the whole community for their efforts and content provided, because without these it would not be possible to create this installer.
       
      I would appreciate comments and suggestions!!
       
      Status:
      AIRPORT : OK Atheros QCWB335 (AR9565) (168c:0036) Mini PCIe *BLUETOOTH : OK Atheros AR3012 (0cf3:3121) USB 2.0 **AIRDROP : Not TestedHANDOFF : Not TestedCONTINUITY : Not TestedWOL : Not TestedIMESSAGE : OKFACETIME : OKICLOUD : OKAPPSTORE : OK
      Known Issues:
       
      - Partial support with a maximum speed of 10Mbits (10.11.0+) *
      - Don't support Bluetooth Power Off/On by Software (10.10.0+) **
       
      Sources:
       
      Insanelymac
    • By Mieze
      Key Features of the Driver
      Supports Qualcomm Atheros AR816x, AR817x, Killer E220x, Killer E2400 and Killer E2500.
      Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission.
      No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer.
      TCP, UDP and IPv4 checksum offload (receive and transmit).
      Support for TCP/IPv6 and UDP/IPv6 checksum offload.
      Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data.
      Fully optimized for Mountain Lion, Mavericks and Yosemite (64bit architecture) but should work with Lion (only 64bit) too, provided you build from source with the 10.7 SDK.
      Wake on LAN support.
      VLAN support is implemented but untested as I have no need for it.
      The driver is published under GPLv2.

    • By Nonta72
      Hi,
      I have an Atheros AR5B195 wifi card that actually works pretty good on Yosemite after a proper DSDT patch.
      The problem now is that the card can't seem to discover any network when the computer wakes from sleep.
      I have to restart the computer before the card can discover networks again.
      I used a DSDT patch to make it work. I have also tried some injectors found here on this forum and OSXLatitude but they did not fix this issue.
      Can someone please help?
      Thanks!
    • By fluxus123
      Hello bright community!
       
      I have just got myself a WiFi card with Atheros AR3980 chipset (devID 168c,30 - Sub Ven 106b Sub Dev 009a), which I thought was supposed to work out of the box(?), as it's the same that Apple uses natively (checked the info.plist in AirportAtheros40.kext)(?)
       
      I plugged in the card, restarted, then tried to set it up in System Pref under Network by adding the device with the "+" but WIFI doesn't show up, only my 2x ethernet ports and bluetooth.
       
      In system profiler under PCI I just see this:
       
      pci168c,30:
       
        Type: Other Network Controller
        Driver Installed: No
        MSI: No
        Bus: PCI
        Slot: PCI Slot 7
        Vendor ID: 0x168c
        Device ID: 0x0030
        Subsystem Vendor ID: 0x106b
        Subsystem ID: 0x009a
        Revision ID: 0x0001
        Link Width: x1
        Link Speed: 2.5 GT/s
       
      When using Kextstat in Terminal it tells me that the corresponding kexts are loaded:
       
        113    1 0xffffff7f82998000 0xe6000    0xe6000    com.apple.iokit.IO80211Family (1200.12.2) A08E69B1-9559-358F-A363-9083B344DA10 <112 50 22 8 7 6 5 4 3 1>
          114    0 0xffffff7f82a7e000 0x14c000   0x14c000   com.apple.driver.AirPort.Atheros40 (700.74.5) 448A2423-55B3-3033-BE5F-CB19CB92D35E <113 50 12 7 5 4 3 1>   In IOReg it shows to be connected under an odd tree/device/address - not the usual I have seen (RP0x etc) I have attached the IOReg file below.
       
      Do I need to edit my dsdt to make this work? I have attached my current DSDT as well. 
       
      Oh, turning on dsdt mask for Lan and Wifi in clover also didn't work. Hitting a brick wall here. 
       
      Thanks a lot for all your helpful comments and suggestions already!
       
       

      Atheros Issue IORegistry.zip
      DSDT.aml.zip

×