Jump to content
Welcome to InsanelyMac Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

43 posts in this topic

Recommended Posts

No it's fine, actually it's works well JamesLittler, thank you :)


I just have some little questions. Let's say I installed OS X on a hard disk and Windows on SSD. I also have another hard drive for Windows 7 (music, images, videos).


...Do you think that if I plugged them in the same time and insert a dual-boot (Chameleon, by putting the hard drive as primary boot OSX.) do they will work?

...If, for example, I start OS X, do the other drives will they be affected by OS X (SSD and HDD Windows 7) or they will only be disabled (turn off) ? Because I'm too afraid that OS X can write on my other hard drives and the corrompres them since I have important files.

...Also, is that run OS X is he good for the health of my computer and my other drives (SSD W7, HDD W7) ? The dual-boot does not risk damaging my computer hardrive (CPU, Graphics Card, Motherboard) ?

I'm a little paranoid, but this is all new to me, so I prefer to know everything about everything :)


Oh yeah also, a few hours ago, I installed my second monitor. Everything worked very well. But when restart my PC (with two monitors installed), I had a small problem. My computer got stuck on a white screen.

If I started up my PC with a single screen, everything works fine. I just need to reconnect the second monitor when I'm on the OSX desktop so I can use both screens. Is there a solution for this ?


And finally, is there a solution to improve the precision of my mouse ? Because on OSX, I feel that it isn't too reactive, and accurate that Windows 7 does. I have heard of hardware acceleration, is this what gives the comfort to the mouse?

Share this post

Link to post
Share on other sites

Plug in all your drives, make sure the drive with Chameleon is set to primary.

Chameleon will boot and show ALL bootable partitions, pick which one you want and hit enter.


You're drives will be fine unless you do something stupid like format one of them.


For your mouse sensitivity, what is it? USB, PS2 Bluetooth, Optical, Laser.....?

Have a look in system preferences, you can adjust the sensitivity just like in any other OS.

Share this post

Link to post
Share on other sites

Thanks for your reply :)


My mouse is a G700, a laser mouse.

Ok, with regard to hard drives, that comforts me. I'm just not format anywhere.


And according to you, do you think OS X is it healthy for components of my computer ? It will don't heat up more than usual and will not degrade performance ? (i7 3770k, GTX 680, Asus Maximus V Formula)

At the same time, the dual boot is not going to damage my computer ?


Do you think is there a solution to the problem of dual monitor ?

Share this post

Link to post
Share on other sites

OS X is fine health wise.

I haven't booted windows in nearly a year on mine but from what I remember it runs at about the same temps as OS X..


I'm sure you could fix the monitor issue with either an efi string, a dsdt mod or a kext edit.

Share this post

Link to post
Share on other sites

Thank hugely JamesLittler, rockinron_1, TheRacerMaster and also InsanelyMac community ! Thank you for your friendliness and patience you have given me.

Don't change anything, you are the best forum for people seeking OSX on Windows !

Thank you very much again, you were such a great help !

Share this post

Link to post
Share on other sites

So ?

How this hack is going ?


The 82579V is functional, just put inside the IONetworkingFamily.kext (plugins) : AppleIntelE1000e.kext ; already done ? ok ;)


Do you have a Windows partition ?


I will need a HWMonitor or OpenHardwareMonitor dump if you don't mind. I'd like to add the support of our board inside SuperIOSensors to monitor it.


Do you think you could transmit me that ?








EDIT : By the way, those games were fabulous




Share this post

Link to post
Share on other sites

And here are the files:

HWMonitor and OpenHardwareMonitor : http://www.mediafire.com/?5fyrizhjwszw950

Hoping that this will help you and help me at the same time :)


I also have a question a little bit subsidiary, I intend to also install Mountain Lion on my laptop X53SV which is an ASUS. Do you think this can be done ?

Share this post

Link to post
Share on other sites


This is great, thank you very much :)


I will forward a .plist to Kozlek for the support of the MVF in HWMonitor.


I just know those Asus laptops for Gamers are highly compliant with OS X :) I can't tell for this specific model though :)





EDIT : Do you speak French ?

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By rtke333

      Could anyone help me installing High Sierra on this system?
      I succesfully installed Sierra before on this system with help of Jake Lo (thanks!!), I just wondering if could High sierra possible to installed on this system?
      Boot stopped at this. I'll attach my Clover folder and a picture from boot.
      UEFI enabled, and for skylake I used IntelGraphicsDVMTfixup and IntelGraphicsFixup kexts. My bios is very limited and does not have any option to change dvmt prealloc or anything else.
      Everything works fine on Sierra.
      Here is my system:

      Acer Aspire V15 V5-591G-55TU
      (Note: Bootpack works fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)

      Mobo: Skylake USOPP_SLS
      Bios: Insyde corp latest version
      CPU: Intel Core i5-6300HQ 2.30 GHz (Skylake)
      GPU: Geforce GTX 950M 2 GB (optimus, disabled), Intel HD 530
      Ram: 8 GB DDR4 (4+4 GB)
      Wifi: Qualcomm Atheros QCNFA344A, Replaced to BCM94352Z
      Ethernet: Realtek 8168B/8111B
      Audio: ALC 255 (layout-3 fix)
      Card Reader: Realtek
      HDD: 1 TB
      Dual-boot with Windows 10

      Any help appreciated!

      UPDATE! (2017.10.30)
      UPDATE! (2017.11.09)
      UPDATE! (2018.02.01)

      Successfully installed High Sierra 10.13, 10.13.1, 10.13.3
      (Original OSXLatitude post link: http://forum.osxlatitude.com/index.php?/topic/10077-success-acer-aspire-v-15-v5-591g-55tu-high-sierra-dual-boot-windows/)
      Wi-Fi and Bluetooth with BCM94352z: (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, install them with Kext Utility or another kext installer) (Original WiFi is Qualcomm Atheros, unsupported but BT works) Hand-off with BCM94352z Full Graphics enabled on HD 530, HDMI, VGA. ALC 255 Audio: (Internal Speakers, Internal Microphone, Headphone jack (microphone not tested) with layout-3 fix (you can use AppleHDAPatcher) Ethernet Realtek 8168B/8111B App Store, Messages, FaceTime, Siri, iCloud (native) Integrated webcam (native) 3.0 USB (native) Touchpad and Keyboard: Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn. (VoodoPS2Controller.kext) Battery info: Install ACPIBatteryManager.kext with kext utility or other installer. Sleep Mode: In High Sierra sleep mode not worked for me natively. Inject custom EDID to fix the blank screen after wake from sleep
      See here for instruction (thanks black.dragon74 and Jake Lo !!) Please add these 2 patches to ACPI\DSDT\Patches in your config.plist in order to avoid not responding applications after sleep: (added in "v5_591g_55tu_updated_CLOVER.zip") HECI to IMEI 48454349 494d4549 EC0 to EC 4543305f 45435f5f Before updating to a new version of High Sierra please update kexts to new versions to avoid kernel panics Note: No need for "IntelGraphicsDVMTFixup.kext" so you should delete it. Not working:
      Original Wi-Fi: Qualcomm Atheros QCNFA344A unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle. NVIDIA GTX 950M: Optimus not supported. Card Reader: Unsupported For WiFi:
      You can choose an external USB wifi dongle (I used tp-link Archer T1U (5GHz support), Tp-link have official macOS drivers, you just need to install it (OR)Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kext I wrote above I'll attach my EFI folder for anyone who want to install High Sierra (acer_aspire_v5_591g_55tu_hs.zip).
      *REUPLOADED updated CLOVER folder, attached as "v5_591g_55tu_updated_CLOVER.zip" (uploaded to OSXLatitude forum, can't upload here).
      I'm using High Sierra in Dual-boot with Windows 8.1. To do this in a clean install or with Windows installed first try my little minimal guide:
      Dual-boot clean install (on one drive):
      1. Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it's no matter what), 1 for Mac), 
      2. Install Mac, boot with your USB, *mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder, copy the CLOVER folder I attached to the EFI folder, restart,
      3. Boot into your Win installer, Format the partition you created for Win, install. 
      4. Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi 5. You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
      Dual-boot with Windows installed first (on one drive):
      If you already have Windows and you don't want to lose all your data there is a hope:
      You need bootable Mac Installer and a full system restore image (you can search for it).
      (You may see errors if your EFI partition is not 200 MB)
      1. Boot into your Windows, resize your partition or create one for Mac.
      2. Boot into your Mac installer and in Disk Utility format the partition you created.
      3. Restore from image: select your full system restore image.
      4. When it's finished restoring you just need to restart, then boot to the system with your usb.
      5. Do Step 2. from "*" from clean install dual-boot above. but KEEP "Microsoft" FOLDER IN IT!
      6. Do Step 4. from clean install dual-boot above.
      7. You're done! You can select your old Windows and your new macOS!
      (I only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
      Make sure you have partitions in GPT The best version for restore method is Windows 8.1. It's using 200 MB EFI. Windows 10 using 100 MB EFI and will annoy the Mac restore. You can use with Windows 10, just ignore the errors IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT installer IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found)
      It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem) You also could "mount" the EFI from windows, for that open cmd and type: diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition, to manage files download totalcmd or explorer++ (run as admin)) remove letter=b (This will "unmount" your EFI) Here is a video from dual-boot with Windows installed first (on one drive):
      Here some pictures:

    • By MikixIT
      Salve a tutti ho installato OSX, Sierra 10.12.6 (16G29), grazie a questo forum
      Ho installato tutti i Kext necessari da Nvidia a quelli per l'audio HDMI,ethernet ecc..
      L'unico problema che  Mouse e tastiera USB collegati ad un hub FUNZIONANO, mentre senza hub usb non funzionano nelle altre porte, NELLE ALTRE PORTE PERO' FUNZIONANO PEN DRIVE USB,ho provato vari kext in rete mentre il Forum era in manutenzione
      Ma non riesco a farli funzionare su altre porte,vi allego La mia EFI( http://www.mediafire.com/file/mimomvp1on4ys58/EFI-MikixIT 12%3A03%3A2018.zip) E vari screen del mio OSX con info varie

    • By zafirofx
      Hi everyone. I installed MacOS High Sierra on my computer 3 months ago, in January. After a long way to get the computer fully working now I'm facing a new problem: imagine I'm working or doing something in my computer and it suddenly freezes and I have to restart it.  There's no reason why the computer restarts by itself...
      Here I also attach my Clover EFI folder in case you need it (it doesn't allow me to attach it so here i give you the link: https://mega.nz/#!92xCiLDZ!WY1F55ZvuP-9WW369EP9KY-3hNLt5sWUgJDxPrbgpPM .
      Thank you in advance.
    • By MikixIT
      Hi guys
      i need help for this kernel panic its the first hackintosh for me
      I posted photo error
      my spec: i7 720qm,gt 730 2 gb ddr3 msi,8 gb ram
      its a desktop
      Pls help me

    • By Allan
      Hello guys.   As some of you know, the option fast startup cause some problems in dual-boot Hacks, this happens because the Hibernation mode. But is possible you keep the fast startup on, and disable Hibernation: 1 - powercfg /h /type reduced This command line will reduce the size of hiberfile.sys file, in simple words, will cut the file in the half.
      Some people recommend solve that by using this command line bellow:
      2 - powercfg /hibernate off But if you do that, you'll disable Hibernation and Fast Startup.
      Use the first command line in Command Prompt (Admin) above (1º), and you'll enjoy this great resource in your dual-boot.