Jump to content
lmt1979

Kernel Panic on Restart Asus P6T Deluxe V2 Core i7 920

3 posts in this topic

Recommended Posts

Hi guys, I have an Asus P6t Deluxe V2 board with a core i7 920, 12 gigs of ram (6 sticks), running 10.7.2. Everything is pretty much great except for the Kernel Panics I'm getting on restart/shutdown. I've repaired permissions already. Here are some screenshots of the KP after I attempt to restart.

 

As always thanks in advance for looking this over and any suggestions/help/explanations, there is always more to learn with this hacking.

 

https://dl.dumptruck.goldenfrog.com/p/yzVDvmlLq9/Kernel%20panic%202012-08-08%2007-25-33-096.jpg

 

Kernel%20panic%202012-08-08%2007-25-33-096.jpg

 

https://dl.dumptruck.goldenfrog.com/p/Pl3BskxBvz/Kernel%20Panic%202012-08-08%2007-25-36-719.jpg

 

Kernel%20Panic%202012-08-08%2007-25-36-719.jpg

Share this post


Link to post
Share on other sites
Advertisement

This may help you:

http://apple.stackex...nics-on-my-imac

 

In short verify the file system of any NTFS drives plugged in to your system. Better still unplug all drives apart from your OS X one and see if the problem persists.

 

Don't be scared to read apple forums regarding panics, a good hack is pretty much the same as a real mac so the problems crossover.

 

Also if you don't know how to read kernel panics where it says "extensions in backtrace:" thats the driver thats giving you issues

Share this post


Link to post
Share on other sites

Agree fully with rockinron_1 - one thing I don't agree with is a comment on the apple forum linked that ntfs drivers are extremely stable, especially once you try to enable any write support. So aside from the obvious unplugging of drives and filesystem repair, if you have Paragon or Tuxtera installed to enable writing to NTFS, that would be another thing to look at...by look I mean remove

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SepehrM
      I'm trying to install High Sierra 10.13.3 on an ASUS N552VW laptop, and I get stuck after this message:
      "could not recover SATA HDD after 5 attempts, terminating" 
      And some other warnings afterwards.
      Specs:
      CPU: Intel Skylake 6700HQ 2.6GHz
      RAM: 16GB DDR4
      2TB HDD + 128GB SSD
      GPU: Intel HD Graphics 530 + Nvidia GTX960m
      I'm installing using a 16GB USB3 flash drive on one of HDD volumes (UEFI Mode)
       
      I uploaded the verbose log and clover config.plist
      config-new.plist

    • By JRevenge
      Ciao ragazzi,
      alla fine sono riuscito a risolvere il problema che riscontravo qualche mese fa, dopo l'ottima EFI sistemata da @gengik84 e l'ho risolto rimuovendo dart=0 che creava kernel panic e problemi quando la batteria scendeva sotto ad un livello di batteria basso. Adesso il sistema non crea più problemi di kernel panic, ma volevo chiedervi se allo stato attuale secondo voi c'è qualcos'altro da ottimizzare.
       
      Vi allego la EFI.
       
      Grazie anticipatamente.
      CLOVER.zip
    • By TheAngryYeti
      So after a gazillion tries with High Sierra, i gave up and decided to try Mojave. I had nothing to lose, afterall.
       
      I started from scratch. I reformatted my thumb drive. Made it bootable from the Mojave [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Booted with it. Selected my language. It installed a little bit. Rebooted. I Booted from the SSD. Installed a bit more. Rebooted. I Booted from the SSD again and it finished the installation.
       
      I went through the basic setup and got to the desktop. I ran [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and selected my options and "built" it.
       
      Thinking i was a-ok, i decided to reboot, just to make sure all was well.
       
      After about 1min, i lose display.
       
      I thought i had messed something up in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], so i decided to go back to my mac mini, redo the thumb drive all over again.
       
      I go to boot from the thumb drive and when i get to the language selection screen, i lose all USB usage, so i cant even get in to wipe the SSD and start over. So, Mojave is still on the SSD, but i cant get to it because i lose display.
       
      Im attaching a screenshot of Verbose mode right before i lose display.
       
      I would greatly appreciate any help to get back into it or at least help getting it re-installed!!
       
      -Sin

    • By TheAngryYeti
      First, my build:
       
      Asus ROG Strix H370-I mobo
      i5 8400 cpu
      32gb ddr 4 2133
      1tb samsung evo 860 ssd
       
      Ive finally gotten to the point where the installation of HS loads to the language selection screen, but then i lose all usage of every USB port.
       
      Im at a loss of what to do from here.
       
      According to others, i have the proper files in the kexts/other folder as well as the drivers64UEFI folder.
       
      Does anyone have any suggestions as to what i can do? Im getting kinda desperate as ive been at it for a week now and this is as far as ive gotten.
       
      -Sin
       
       
    • By TheAngryYeti
      So I FINALLY got my High Sierra thumb drive to boot and once I got to the language selection screen, I noticed I lost all connectivity to my keyboard and mouse.
       
      i tried plugging in both into all of my USB ports (2.0, 3.0, 3.1) to no avail.
       
      i made sure I had the latest USBInject kext and XHCI-Unsupported kext in the Other folder.
       
      i also noticed whilst troubleshooting, the thumb drive will ONLY boot using Verbose and plugged into one of the 2 3.1 ports.
       
      does anyone have ANY suggestions?? I’ve been struggling for a week now on this!!
       
      thanks in advance
       
      -Sin
       
      Build: Asus ROG Strix H370-I, i5 8400, 32Gb ddr 4 2133, 1Tb Samsung EVO 860 ssd
×