Jump to content
Sign in to follow this  
Followers 0
OneBlueSky

[Solved] GTX 560Ti & Mountain Lion

17 posts in this topic

Recommended Posts

Hello!

 

I've been racking my brain trying to get my 560Ti card working in Mountain Lion. Some people seem to have it working OOB, but no such luck here. I've tried all the boot flags applicable to video issues, no luck. Can't seem to find any kexts for it either! So I can't get native resolution, or any kind of acceleration. If I load anything with any kind of graphic movement (the scrolling bar in Safari for example) it immediately crashes the system (with no error). It just freezes the screen until I force a restart by holding the power button.

 

Can anyone help me figure out how to possibly edit the working kexts for Lion, to work in Mountain Lion? Or maybe show me what I need to do to come to a solution that might work? Thank you!

Share this post


Link to post
Share on other sites
Advertisement

Just an update.. Another thing I have tried, is putting all the kexts related to NVIDIA stuff from Lion, into S/L/E of Mountain Lion. Doesn't seem to do anything at all. Didn't really expect it to, just an update on something else I tried in case anyone has any ideas :)

Share this post


Link to post
Share on other sites

Try removing the following Options from your org.chameleon.Boot.plist

They was causing this problem here:

 

boot option: EnableC2State=Yes

boot option: EnableC3State=Yes

boot option: EnableC4State=Yes

 

 

This is how my bootloader config looks like:

 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Legacy Logo</key>

<string>No</string>

<key>EthernetBuiltIn</key>

<string>Yes</string>

<key>GenerateCStates</key>

<string>Yes</string>

<key>GeneratePStates</key>

<string>Yes</string>

<key>Graphics Mode</key>

<string>1680x1050x32</string>

<key>GraphicsEnabler</key>

<string>Yes</string>

<key>Kernel</key>

<string>mach_kernel</string>

<key>Kernel Flags</key>

<string>npci=0x2000</string>

<key>Timeout</key>

<string>5</string>

<key>USBBusFix</key>

<string>Yes</string>

<key>EnableHDMIAudio</key>

<string>Yes</string>

<key>KeyLayout</key>

<string>mac-de</string>

<key>UHCIreset</key>

<string>mac-de</string>

<key>ForceHPET</key>

<string>Yes</string>

</dict>

</plist>

Share this post


Link to post
Share on other sites

Try removing the following Options from your org.chameleon.Boot.plist

They was causing this problem here:

 

boot option: EnableC2State=Yes

boot option: EnableC3State=Yes

boot option: EnableC4State=Yes

 

 

This is how my bootloader config looks like:

 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Legacy Logo</key>

<string>No</string>

<key>EthernetBuiltIn</key>

<string>Yes</string>

<key>GenerateCStates</key>

<string>Yes</string>

<key>GeneratePStates</key>

<string>Yes</string>

<key>Graphics Mode</key>

<string>1680x1050x32</string>

<key>GraphicsEnabler</key>

<string>Yes</string>

<key>Kernel</key>

<string>mach_kernel</string>

<key>Kernel Flags</key>

<string>npci=0x2000</string>

<key>Timeout</key>

<string>5</string>

<key>USBBusFix</key>

<string>Yes</string>

<key>EnableHDMIAudio</key>

<string>Yes</string>

<key>KeyLayout</key>

<string>mac-de</string>

<key>UHCIreset</key>

<string>mac-de</string>

<key>ForceHPET</key>

<string>Yes</string>

</dict>

</plist>

 

Going to try this and report back shortly! Fingers crossed!

 

Edit: Hmm... The lines -

"

boot option: EnableC2State=Yes

 

boot option: EnableC3State=Yes

 

boot option: EnableC4State=Yes

"

 

 

don't exist for me to delete.

 

Sadly, didn't work for me! However my card now shows as what it is, an NVIDIA GTX 560Ti with 2048mb, until this point it was showing as nothing and just "3mb"... Closer I guess, but hopefully can get the rest of the way!

Share this post


Link to post
Share on other sites

Fixed!! I used the kexts for DP3 from http://www.insanelymac.com/forum/index.php?showtopic=280837&view=findpost&p=1837150 installed them using kext wizard, rebooted, and my problem is gone! Apparently the NVIDIA support has been messed up from DP4 on. So reverting back to DP3 kexts works great. I have full graphics support, acceleration is working, everything is perfect.

 

Hopefully it works for you guys having the same issue as well!

Share this post


Link to post
Share on other sites

Fixed!! I used the kexts for DP3 from http://www.insanelym...dpost&p=1837150 installed them using kext wizard, rebooted, and my problem is gone! Apparently the NVIDIA support has been messed up from DP4 on. So reverting back to DP3 kexts works great. I have full graphics support, acceleration is working, everything is perfect.

 

Hopefully it works for you guys having the same issue as well!

 

how did you get past the black kernal panic after the gray screen?

thats the only issue i'm having. i cannot get to the installer screen..

Share this post


Link to post
Share on other sites

for me is NV*.kext from DP2 that's working for me., on DP2 is one kext less than the other version of DPx & retail of ML.

 

 

//Peter

Share this post


Link to post
Share on other sites

how did you get past the black kernal panic after the gray screen?

thats the only issue i'm having. i cannot get to the installer screen..

 

I wasn't having that issue I'm afraid :worried_anim: All my troubles began after installing. What method of install are you using? Maybe we can get it figured out :)

Share this post


Link to post
Share on other sites

I wasn't having that issue I'm afraid :worried_anim: All my troubles began after installing. What method of install are you using? Maybe we can get it figured out :)

 

[url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url].. since i installed lion very easy with it..

what method did you use?

Share this post


Link to post
Share on other sites

using the DP3 kexts are you able to use dual monitors? My build at the moment is lacking dual monitor support. Im running a Z77 ud5h i7 3770k and gtx 5610ti with kexts from ######. I used PCIRootUID=0 and everything else standard.

Share this post


Link to post
Share on other sites

using the DP3 kexts are you able to use dual monitors? My build at the moment is lacking dual monitor support. Im running a Z77 ud5h i7 3770k and gtx 5610ti with kexts from ######. I used PCIRootUID=0 and everything else standard.

When I get home I'll check what Kexts I'm using. With my 560Ti's, dual monitors work beautifully.

Share this post


Link to post
Share on other sites

NoKz are you using a single 560? i have tried a few things and been researching for over a week now and i cant seem to find anything.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By arsradu
      Hi guys,
       
      So, this little tutorial is meant to help people fix a new issue with Mojave: opening jpg files (looks like it happens with larger files, not so much with smaller ones) using Quick Look (on spacebar key pressed) or Preview app using the dedicated GPUs.
      The issue is that, when trying to open jpg files (for some reason, it doesn't occur with pngs), the pop-up window would remain in an endless loop. And from that point forward, any other app trying to open the same file, will either become unresponsive (in the case of the Preview app) or just stay in endless loop (in case of Quick Look)
       
      As a workaround, in case the tutorial below doesn't work for you, you can use Grab (built-in app in MacOS) to open said files.
       
      This issues DOES NOT occur using the iGPU. So...if you're comfortable using the iGPU, just switch to that and you should be good to go. You don't need this tutorial.
       
      This tutorial is based on @Cyberdevs' research and testing on this topic (especially useful if you're using an RX series AMD video card), and my own very limited time testing this on my rig. I just thought it would be useful to create a new thread for it so that people can discuss this particular issue here.

       
      With that being said, I'll just move on to the actual tutorial.
       
      New (probably better) method.
       
      Switch your SMBIOS in Clover config in regards to the dedicated GPU you're using, instead of the CPU. Take a look here and choose the corresponding SMBIOS closest to your hardware.
      Yeah, that's it.
       
      In case you lose CPU PM with this method, there are multiple ways to fix that, and they do not make the object of this thread.  It worked perfectly fine for me though and I didn't need to change anything else.
       
      In case you wanna try alternative medicine  ...
       
      The main thing we need to do is actually very simple: we need to enable the iGPU (integrated GPU) by default, in BIOS, while actually being connected to the dedicated GPU.
       
      For ATI GPUs (curtesy of @Cyberdevs' post here).
       
      The discreet GPU should be set as primary in BIOS and your displays should be connected to your discreet GPU
      The iGD/iGPU/iGFX must be enabled in BIOS/UEFI as the secondary GPU.
       
      I removed the DSDT Reconfigured the config.plist to and removed some flags which weren't needed because of the DSDT added the InjectATI + Ornioco Framebuffer (I removed the Orinoco framebuffer because of some weird glitches but it might be useful for other AMD GPUs if you inject the correct framebuffer according to your GPU. No need to inject anything for nVidia GPUs unless your GPU needs it) Added the InjectIntel + ig-platform-id for my intel HD530 (for intel HD 530 I use the 0x19120001 ig-platform-id) Removed com.apple.finder.plist Removed com.apple.QuickLookDaemon.plist rebuild the kextcache and reset the nvram  
      Steps 5 to 7 might not be necessary I just did them anyway, if anyone succeeded to get quicklook working without those steps let me know so I can exclude those steps.

           Also confirmed to work with AMD R9 270X on a SandyBridge rig (without an iGPU) using WhateverGreen + Lilu kexts, which also helped to solve the transparency issue along with the Quick Look problem, it also resolved the buggy Screen Capture (Command+Shift+5) issue as well. 
       
          Also, do:
      nvram cleanup kextcache & prelinked kernel rebuild reboot  More info on that here.
       
       
      For NVIDIA GPUs
       
      This is what I needed for my NVIDIA rig and the MSI motherboard in the signature. Your milage may vary, depending on your hardware. But, the idea should be the same regardless.
       
         For MSi motherboads (check out my motherboard details in the signature)
       
      Set your BIOS to use PEG (dedicated GPU) so you can boot.
      Since you're reading this, chances are that you're already connected to the dedicated GPU and the BIOS is set to PEG. So just go into BIOS and see if you're using the iGPU or the dedicated (PEG) graphics device by default.
      If you're already using this, skip to Step 3 (the part AFTER Reboot). Reboot (I think you don't necessarily need to boot into the OS...but you do need to reboot at least until Clover UI) Reboot back into BIOS and set it from PEG to IGD (integrated graphics) WITHOUT removing the cable. Save Reboot again.  
         The result should be that the OS is tricked into thinking you're booting with the IGPU when in fact you're using the dedicated GPU.
       
         For Gigabyte motherboards
       
         Set:
      Peripherals -> Initial Display Output -> iGFX Chipset -> Internal Graphics -> Enabled
           DVMT Pre-Allocation -> default 64M.
           DVMT Total Gfx Mem -> default 256M Save Reboot  
         You should do this with the cable connected to the dedicated GPU.
       
      You will also need to patch the iGPU from Clover config.
      1. Graphics -> Inject Intel (UNCHECK Inject Nvidia or ATI if it's checked).
      2. ig-platform-id (in my case for Intel HD 4600 Desktop) it was: 0x0d220003
       
      And use IntelGraphicsFixup.kext in Clover/kexts/Other. In my particular case, without the kext, I would get freezes in Safari.
       
      This might be a bug with Mojave and it could be fixed by Apple in the future. but in the meantime, feel free to use this if it helps you fix the issue.
       
      For HP motherboards (including laptops), so far no solution, unless the BIOS somehow allows to switch from eGPU to iGPU and vice-versa.
       
      Cheers!
    • By MaLd0n
      Now have a Olarila Folders app, just download app and clover folder for your Chipset! Download Folders.app     First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.MaLd0n GA H110M-S2.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI --FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By zEvilz13
      Hello!
       
      1. I install 10.13.5 on PC and install latest Clover. Working fine with NullCpuPowerManagement.kext. Then I reconfigure config.plist to work with native power management but have kernel panic. Then I found kernel fixes for pentiums, add this to config.plist and have panic again. How i can fix it without using custom DSDT?

      P.S. Also why a have worked speed step with NullCpuPowerManagement.kext? Checked in HWMonitor. Also have good results in Geekbench4 - 3016/5227 points in single/multi-core mode (linux - 2861/4476, win - 3038/4850).

      2. GTS250 worked out of the box. But I have problem during starting with HDMI connection (lost signal to monitor). No problems with VGA. How i can fix it without using custom DSDT?
       
      Hadrware:
       
      MB: Asus H61M-A
      CPU: Intel Pentium G2120 (Ivy Bridge)
      Video: Gainward Nvidia GeForce GTS 250 deep green 512Mb (iGPU disabled in UEFI)
       
      Kexts:
       
      AppleALC.kext
      FakeSMC_ACPISensors.kext
      FakeSMC_CPUSensors.kext
      FakeSMC_GPUSensors.kext
      FakeSMC.kext
      FakeSMC_LPCSensors.kext
      Lilu.kext
      RealtekRTL8111.kext
      USBInjectAll.kext
       
      ACPI Clover dump - acpi_clover_dump.zip
      worked config.plist with NullCpuPowerManagement.kext - config.plist_nullcpupm.zip
      not worked config.plist with fixes and without NullCpuPowerManagement.kext - config.plist.applecpupm.zip
    • By x_sirius
      Hi, I would like to know if you can help, I have a problem with my old system, I have tried to install High Sierra, but I have not managed to make the acceleration of graphics work on my video card NVidia Geforce 9400 GT, eh intendo a lot of methods without Any success, the system recognizes my card and all its data correctly but the acceleration of graphics does not work, this problem is due to install a processor Xeon e5450 3.0ghz Mod 771 to 775 LGA, since installing this peocesador the graphics stopped working and what appeared was a glitch on the screen that shows absolutely nothing, to enter the system I had to enter with bootflags nv_disable = 1 in clover configurator, I have managed to see in other post information to this problem and say that it has been solved with the bootflag npci = 0x2000 and npci = 0x3000 to solve the Glitch on the video card, in my case the boot system is restarted, after a lot of frustration for wanting to start with the graphics, delete all the kexts of graphics cards ATI, Nvidia, from the folder System \ library \ Extensions \ and success !! .... the glitch of the graphic card disappeared completely, the problem of the glitch on the screen was generated by the kexts nvidia, now I can start with Inject Nvidia, but e peoblema is that now the graphics do not work with acceleration, I do not know what to do with this peoblema, my motherboard is Intel DG41TY. another person suggested modifying my dsdt.alm but I could not compile the code provided to me, I get an error in DSDTSE. please maybe you can help me with this problem. I will leave you the link where is the information to compile the code of my nvidia geforce 9400 to my dsdt.alm...... I am the user X_SIRIUS https://www.tonymacx86.com/threads/nvidia-geforce-9400gt-on-sierra-not-works-ok-kernel-panic-nvdastartup-kext.206208/page-2#post-1793409 
       
       
      I'm trying to install the code in the dsdt.alm I copy the respective code to my Geforce 9400 GT 1024MB nvidia card.

      But when I want to compile the file, the DSDTSE program tells me that I have 1 error, 3 warnings, 1 remarks, 49 optimizations.

      I try to find the file dsdt.alm that the program saved and I can not find it.

      My Motherboard is Intel DG41TY.

      here I will upload my dsdt of my current mother card, maybe you can help me compile the code without errors, please
       
      This is my DSDT from my Motherboard Intel DG41TY acpi_dsdt.aml
       
      And This Is The Code text DSDT for Nvidia Geforce 9400 GT 1024MB
      Device (PEGP) { Name (_ADR, 0x00010000) // _ADR: Address Device (GFX0) { Name (_ADR, Zero) // _ADR: Address Name (_SUN, One) // _SUN: Slot User Number Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { Store (Package (0x1C) { "@0,compatible", Buffer (0x0B) { "NVDA,NVMac" }, "@0,device_type", Buffer (0x08) { "display" }, "@0,display-cfg", Buffer (0x08) { 0x03, 0x01, 0x03, 0x00 }, "@0,name", Buffer (0x0F) { "NVDA,Display-A" }, "@1,compatible", Buffer (0x0B) { "NVDA,NVMac" }, "@1,device_type", Buffer (0x08) { "display" }, "@1,display-cfg", Buffer (0x08) { 0xFF, 0xFF, 0x00, 0x01 }, "@1,name", Buffer (0x0F) { "NVDA,Display-B" }, "NVCAP", Buffer (0x14) { /* 0000 */ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, /* 0008 */ 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, /* 0010 */ 0x00, 0x00, 0x00, 0x00 }, "NVPM", Buffer (0x1C) { /* 0000 */ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0008 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0010 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0018 */ 0x00, 0x00, 0x00, 0x00 }, "VRAM,totalsize", Buffer (0x04) { 0x00, 0x00, 0x00, 0x40 }, "device_type", Buffer (0x0D) { "NVDA,Parent" }, "model", Buffer (0x17) { "NVIDIA GeForce 9400 GT" }, "rom-revision", Buffer (0x25) { "NVIDIA GeForce 9400 GT OpenGL Engine" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } } https://tonymacx86.blogspot.com/2010/01/advanced-dsdt-fixes-nvidia-graphics.html
      this is the procedure to follow, but I can not compile the code to my DSDT, please be eternally grateful if someone can help me with this, because I get errors in the DSDTSE editor, I attach an image of the errors that the Program. 

       
      And this is the Glitch, kexts Nvidia error whit Xeon E5450..

×