Recently Browsing 0 members
No registered users viewing this page.
I am new in this, i try to make my hp laptop in hackintosh but i facing some error in clover boot manager while installing but unable to understand it. I really try hard but not able to get there, something i noticed that i facing same kind of error every time. I just watched youtube and visitied so forum like tonymac86, InsanelyMac, Noobsplanate and so on but nothing solved. So Please Please I Request All of You If you can help me to resolve my problem.
Here Is my Laptop Specs:
Laptop : HP cs2082tx
Mobo : HP84C1
Southbridge : Coffee Lake-U/Y PCH
CPU : Intel Core i5 8265U @ 1.60GHz Kaby Lake- U/Y
Ram : 8 Gb
HDD : 256GB SSD & 1TB HDD
Graphics : Intel UHD Graphic 620 with nvidia MX250
I even don't is my laptop is compatible or not, and don't have MacBook or Mac Desktop so if you can provide important driver and other stuff for installation. I really be very thankful to you.
Please Reply me if any other information about my laptop hardware i will attached it i only have this info right now.
and i here attached my screenshot while installation error in clover.
Sorry for my English.
Please Help Me
I've bought an old Mac from a friend. I got it cheap and it had the Problens before.
now the Mac only booted into Single User / Safe mode until i removed the ATI kext
on top it has those weird lines (as seen in Picture) they are very thin on a white background
so can annybody tell me what is wrong with my mac and what i have to replace (my Mac is an IMac 8,1 early 2008 F226BEC8)
thanks in advance and kind regards
By vector sigma
Control temperature of Intel and AMD CPU Control temperature of AMD, Intel and NVidia cards Control temperature of motherboard Control FANS Control Voltages Control HDD/SSD state (SATA & NVMe) with S.M.A.R.T. monitoring Control frequencies Laptop Battery Monitoring Different applications support High Sierra compatible Installation to /S/L/E or in the ESP (Clover only)
English (base), Russian, Italian, Korean and semplified Chinese
Source code: at https://sourceforge.net/p/hwsensors/hwsensors3/code3/HEAD/tree/
Bugs report at https://sourceforge.net/p/hwsensors/hwsensors3/tickets/
Topic for discussion at: https://www.insanelymac.com/forum/topic/299861-hwsensors3/
Chief Developer @Slice, new HWMonitorSMC2.app and package by @vector sigma
Sorry for the vague subject line, but I think I have a hardware issue and I'm having trouble diagnosing it. This is a LONG post because I'm trying to explain what I tried and to give you all the info that I do have.
History: This has been a successful Hackintosh for 2 years 2 months. I have not changed the OS (still running 10.11.4) just to avoid any problems. I have not changed the hardware other than GPU about a year ago, hard drives over time, and RAM about two weeks ago. (Keep that RAM in mind.)
Motherboard: ASRock Z170 OC Formula CPU: Intel i7-6700K RAM: G.SKILL Ripjaws V Series 32GB DDR4 @2400, replaced with Corsair 64GB DDR4 @2133 (but lower CAS latency) GPU: MSI GeForce GTX 970 PSU: CORSAIR AX760 760W 80+ Platinum CPU Heatsink: CORSAIR Hydro Series H105
Problem, Tuesday Night: Catastrophic death. Just shut down, couldn't get it up. I spent over two hours midnight–2am, then another hour after I got up in the AM, determining that the heatsink pump had died. To make a three hour story short, the errors on the motherboard were all related to RAM, but it had been running fine with the new RAM for 10 days. I put in the old RAM and got the computer to boot, and then I heard that the fans were going full-tilt and saw the CPU temperature at just under boiling. And it shut down. I determined it was the pump and not motherboard because the pump did not turn on when I moved it to a header on the motherboard that had just been powering a fan that was fine. So I ordered a new CPU cooler and installed it yesterday.
Problem, Sunday Night: It was running fine for a day, after installing the new CPU heat sink. We had a brown-out in the morning which apparently did NOT trip any UPS in the house, and the computer restarted. Seemed fine, then tonight (11 hrs after the brownout), I went to make dinner, came back and all the fans were going and the computer wasn't on. The light on the Corsair pump was flickering.
Trying to Diagnose: So, with the light flickering, I thought maybe it was the motherboard after all, and the CPU fan 1 was just dead (or dying). No problem, moved it to CPU fan 2 and moved the fans for the heatsink to chassis 2 and tweaked the fan speeds in the BIOS (I was able to boot to it) and ... couldn't boot. I can get to the BIOS. I can start getting to the Mac OS, but I can't actually boot fully. The motherboard is cycling between error codes 00 and 19, which from what I can find means CPU (00) or RAM (19). I have tried powering the whole system down (on the PSU) for awhile, going back to the old RAM (works but then same error code on reboot), and even going to a passive heatsink I had in storage.
Why this May Be a Hackintosh Question: I have a pattern now to diagnose. After hitting the restart a few times, I can get into the BIOS, no longer getting the 00/19 error on the motherboard. I can get to the Clover boot menu, at which point the diagnostic LED on the motherboard turns off. I can start the Mac OS, it spits out a bunch of diagnostic stuff, and then freezes, and the lights on the motherboard turn back on and flash between the 00 and 19 errors and the display shuts off. I get to the same spot in the Mac OS startup, and that's when it shuts down. To me, from the zero that I know about this, it looks like it's saying there's a CPU error. Meaning I may have fried the CPU (or motherboard? or both?) during that initial CPU cooler failure five days ago. I have attached a screenshot from the video I took of the screen while starting up the last time.
CMOS Reset: I tried doing this as an addendum, after taking pictures of every screen in the BIOS so I could restore. The reset definitely reset the BIOS, I got it to boot to the BIOS again, but I'm stuck at the same death point as in the screenshot. The ONLY difference is that now instead of just stopping there, it goes black for a few seconds and returns to the BIOS option screen (F2 for BIOS, F11 for Boot, etc.), and then tries to boot the Mac OS again. Fails at the same point again, the only difference each time is that in that "Backtrace (CPU #) ..." line, the # changes, and the com.apple.lokit.IOBluetoothHostController... hex stuff is different.
Help!? Do I need a new motherboard and CPU? Fortunately, everything is backed up hourly, and on my laptop, and the HDDs should still be fine.