Jump to content
  1. Edwin Moquete

    Edwin Moquete

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Bazza08
      Hi Guys I have been trying to get my hackintosh to work using High Sierra... My Build is:--
       
      Asus Z87-K Mother board
      Intel i5 processor
      8 gig of Memory
      Nvidia Geforce GT 730 4gb DDR3 
      500gb SSD hard drive 
      I can get it up and running if I take Graphics card out and use Internal graphics, but when I have my graphics card in the only way I can get it to work is to use boot flag nv_disabe=1 .... and the graphics are rubbish..... I am trying to get it working by creating my own DSDT file..
       
      what I have tried is to download and used  RwPortableX64V1.7 to extract 4 SSDT.aml files and one DSDT.aml ... I was looking on this forum for any clues what to do next
      but I a am afraid I am stuck... I have uploaded the files I extracted from  RwPortableX64V1.7
       
      Any Help would be appreciated 
       
      Bazza
      DSDT.aml
      SSDT-1.aml
      SSDT-3.aml
      SSDT.aml
      SSDT-2.aml
    • By Duyhaicx
      Hi everybody. I am not a programmer and English is not my native language. So I'm very sorry if it bothers you.
      I want to use an EGPU but that requires editing the DSDT file. I have added the necessary lines of code. The other is to remove the Warning and Remark. It was really hard for me. So I look forward to getting help from a kind person.
      I use HP 8570w and this is my DSDT.dsl file.
      https://drive.google.com/open?id=1Th5DhYm7L08Ufj8AeQHFrLPSzrTaxFC6
      Thank you and have a nice day.
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/forum/viewtopic.php?f=28&t=8222   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://olarila.com/forum/viewtopic.php?f=28&t=8222     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By ludufre
      New guide available for macOS Catalina 10.15 (i3 and i5 versions)!
       
       
      Installing OS X Yosemite 10.10.3 on ASUS VivoBook S400C (also know as S400CA)
      Specifically in S400CA-CA178H model, most likely all other models are compatible
      Can't boot S400CA-CA206H due HD3000 issues (i3-2375M model)
       
        

      Updated 17/06/15 #1:
       
      - Brightness now work. DSDT patch below.
       
       
       
      - Updated attachment with DSDT.aml and missing VoodooHDA kext.
      - Added TO DO list.
       
      Updated 17/06/15 #2:
       
      - WebCam now work. Kext AnyiSightCam.
       
       
       
      - Update attachment with new WebCam kext.
       
      Updated 19/06/15 #1:
       
      - Can't boot installation in S400C-CA206H model (i3-2375M/HD3000).
       
       
       
      - VGA tested. Don't work.
      - Boot logo work. Missed CsmVideoDxe-64 on my install.
       
      Updated 21/06/15 #1:
       
      - I Forgot of the need of FakeSMC.kext.
       
       
       
       
      Updated 22/11/17 #1:
       
      - High Sierra 10.13.1 on ASUS Vivobook S400C (S400CA-CA178H).

       
      Prequel
       
      Hi, my name is Luan and today I will show how I installed the OS X Yosemite version 10.10.3 on my ultrabook.
      I know that my procedure maybe can be made in other ways, but this is about how I made it.
      I am part of this world for four years. Since the launch of XCode 7 and no need to sign the Developer Program to test applications on the iPhone, I decided to install OS X.
      God bless WWDC15 (I'm not religious, just a popular saying in my country).
       
       
      What works and what does not work
       
      - Processor ->  Work. i5-3317U @ 1.7Ghz/2.6Ghz.  SpeedStep 8 to 26 stages. AsusAICPUPM <true/> in Clover config.plist. 
      - Video Card ->  Work. HD4000. Full QE/CI.
      - Chipset ->  Work.
      - HDMI ->  Work.
      - VGA ->  Not work. I did not have time to fix yet.
      - Audio ->  Work. Kext VoodooHDA + AppleHDADisabler.
      - WiFi ->  Work. Replaced by Athero 9285 Wifi/Bluetooth.
      - Ethernet ->  Work. Kext Experimental Atheros AR81(31/32/51/52/61/62/71/72) Driver for 10.7/10.8.
      - Touchpad and keyboard ->  Work. Kext ELAN, FocalTech and Synaptics (Smart Touchpad) Driver (Mac OS X).
      - FN keyboards keys ->  Not work. I did not have time to fix yet.
      - Brightness control ->  Work. DSDT patch.
      - Sleep ->  Work.
      - Battery ->  Work. Kext ACPIBatteryManager by RehabMan and DSDT patch (below).
      - Card Reader -> Not tested. I have no adapters.
      - Integrated Camera ->  Work. Kext AnyiSightCam.
      - Bluetooth ->  Work. Kext Bluetooth Firmware Uploader and ControllerPowerState change to 1.
      - Boot Logo ->  Work.
       
       
      What I needed to install
       
      - Running install of Yosemite on VMware -> Downloaded version 10.10 via torrent (Google it). You can use a real Mac of an friend. I believe that Snow Leopard (10.6), Lion (10.7), Mountain Lion (10.8), Mavericks (10.9) also work.
      - Two USB flash drives of 8GB -> One for OSX install and another to the bootloader. This second not need to be 8GB, a 256MB is perfect.
      - OS X Yosemite install app -> Downloaded via App Store inside the virtual machine. I used version 10.10.3.
      - CloverEFI -> Also downloaded inside the virtual machine. I used build 3229.
      - DSDT patch skills -> Needed to battery works. How to patch DSDT.
       
      P.s.: You can use a single flash drive, in my install I used two because I don't wanted lose the os install created on the main flash drive.
       
       
      How I created flash cards
       
      Install flash drive:
       
      Partially used @snatch guide. More specifically this part:
       
       
       
       
       
       
      In the part above used the first flash drive (8GB).
       
      Bootloader flash drive:
       
      Format the second flash drive with GUID partition and Journaled file system type. If you want to use only one flash card, don't format!
       
      Downloaded the CloverEFI (used 3229) and installed with this options:

      Options:
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - Drivers64UEFI - CsmVideoDxe-64
      - Drivers64UEFI - OsxAptioFixDrv-64
       
      Will be created a partition named EFI. Edit the /EFI/CLOVER/config.plist and change those values:
       
      - SystemParameters - InjectKexts - <true/>
      - Graphics - Inject - ATI - <false/>
      - Graphics - Inject - Intel - <true/>
      - Graphics - ig-platform-id - 0x01660003
      - KernelAndKextPatches - AsusAICPUPM - <true/>
       
      P.s.: I will provide below my config.plist as attachment.
       
      Now you will capable to boot in installation, but your keyboard and mouse will not work. Let's fix that:
       
      - Download the Smart Touchpad kext from here. I used the version 4.3. This also enable the touchscreen.
      - Download the FakeSMC kext from here. I used the version 6.9.1315. This is very important. Can't boot without it.
      - Put the Kexts inside /EFI/CLOVER/kexts/10.10/
       
      Now you can start the instalation without problem (I guess).
       
       
      BIOS Setup Configuration
       
      - Intel Virtualization Technology: Disabled
      - VT-d: Disabled
      - USB Configuration - XHCI Pre-Boot Mode: Disabled
       
      P.s.: BIOS version 210.
       
       
      Installing indeed
       
      - Plug in the two flash drives.
      - When appear the Asus logo, press ESC once to enter Boot Menu.
      - Select the flash drive name with UEFI prefix. In my case "UEFI: KingstonDataTraveler 2.0PMAP".
      - On CloverEFI menu, use arrow to mark the flash drive with de OS X install, press Space on keyboard and select: "Boot Mac OS X in verbose mode".
      - As usual, format your HDD or SSD as GUID and Journaled. Make more partitions if you need. Take a note of the OSX partition name you entered on Disk Utillity.
      - After that, go ahead as always and start the instalation.
      - Go in the kitchen grab some lunch. You deserve it.
       
       
      Post installation
       
      What we have so far? The system installed on your ultrabook. Now you need to get rid of bootable flash drive installing the bootloader on HDD or SSD.
       
      Installing the bootloader in internal HDD or SSD:
       
      - Boot again selecting the flash drive on Boot menu. Same you did before.
      - Now select the partition you noted early.
      - If you do everything wright, the system will start normally.
      - Now you will use the CloverEFI install package again (same options from above). This time, the target will be your OS X installed partition.
       
      Our adorable ultrabook don't boot EFI if partition on the HDD or SSD if isn't MS-DOS. We will need to format and install Clover again.
       
      - Open the Terminal and enter "sudo -s".
      - Run the command: "diskutil list".
      - Take note of what location is your EFI. Usually it is "rdisk0s1". Make sure it's correct or you loose your data.
      - Now, let's format it, now execute: "newfs_msdos -v EFI -F 32 /dev/rdiskXsX". rdiskXsX is your EFI partition location from line above.
       
      Now you need to copy all data of your flash card bootloader to the root of your new created EFI partition on internal disk.
      This EFI partition is unmounted. Mount with "diskutil mount /dev/rdiskXsX".
       
      Just restart without flash drives to test.
       
      Others Kexts:
       
      Download the kexts from the links below. I strongly recommend always use newest versions. If you are too lazy, I attach on end of the post.
       
      Ethernet: ALXEthernet
      Sound: VoodooHDA (You may have to select the output there in System Preferences)
      Battery: ACPIBatteryManager
      Bluetooth: BTFirmwareUploader
      Integrated Camera: AnyiSightCam
       
      All kexts will be placed inside /EFI/CLOVER/kexts/10.10/, mount again this partition (diskutil mount /dev/rdiskXsX) for it.
       
      Now we need to add Battery patch to a new DSDT:
       
      #Maintained by: RehabMan for: Laptop Patches #battery_ASUS-N55SL.txt # created by RehabMan 8/12/2013 # created originally for jesselid # works for: # ASUS N55SL, BIOS rev. 204 # ASUS VivoBook series # ASUS Zenbook UX31A # ASUS UX301LA # ASUS X553E-SX399V # ASUS F501A # ASUS K55VM # ASUS U46SV, BIOS rev. 2.04 # ASUS N43 # ASUS PU500CA (90NB00F1-M01120) # ASUS N73SV # ASUS X401A-WX108 # ASUS F551CA Bios rev. 207 # ASUS S551LB VivoBook # ASUS ZenBook UX32VD # ASUS F550L-X455H # ASUS X53S # ASUS K550JD-XX003H # ASUS G53SX # ASUS K56CB # ASUS UX305 into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # not really for battery, but might come in handy to read fan speed(s) into device label EC0 code_regex TAH0,\s+16 replace_matched begin TH00,8,TH01,8 end; into device label EC0 code_regex TAH1,\s+16 replace_matched begin TH10,8,TH11,8 end; into method label TACH code_regex \(TAH0, replace_matched begin (B1B2(TH00,TH01), end; into method label TACH code_regex \(TAH1, replace_matched begin (B1B2(TH10,TH11), end; into method label GFAN code_regex \(\\_SB\.PCI0\.LPCB\.EC0\.TAH0, replace_matched begin (B1B2(\\_SB.PCI0.LPCB.EC0.TH00,\\_SB.PCI0.LPCB.EC0.TH01), end; # battery EC into device label EC0 code_regex B0SN,\s+16 replace_matched begin B0S0,8,B0S1,8 end; into device label EC0 code_regex B1SN,\s+16 replace_matched begin B1S0,8,B1S1,8 end; into method label BIFA code_regex \(B0SN, replace_matched begin (B1B2(B0S0,B0S1), end; into method label BIFA code_regex \(B1SN, replace_matched begin (B1B2(B1S0,B1S1), end; into device label EC0 code_regex DT2B,\s+16 replace_matched begin T2B0,8,T2B1,8 end; into method label SMBR code_regex \(DT2B, replace_matched begin (B1B2(T2B0,T2B1), end; into method label SMBW code_regex Store\s+\(([^,]*),\s+DT2B\) replace_matched begin Store(%1,T2B0) Store(ShiftRight(%1,8),T2B1) end; into device label EC0 insert begin Method (RDBA, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BA00, Index(TEMP, 0x00))\n Store (BA01, Index(TEMP, 0x01))\n Store (BA02, Index(TEMP, 0x02))\n Store (BA03, Index(TEMP, 0x03))\n Store (BA04, Index(TEMP, 0x04))\n Store (BA05, Index(TEMP, 0x05))\n Store (BA06, Index(TEMP, 0x06))\n Store (BA07, Index(TEMP, 0x07))\n Store (BA08, Index(TEMP, 0x08))\n Store (BA09, Index(TEMP, 0x09))\n Store (BA0A, Index(TEMP, 0x0A))\n Store (BA0B, Index(TEMP, 0x0B))\n Store (BA0C, Index(TEMP, 0x0C))\n Store (BA0D, Index(TEMP, 0x0D))\n Store (BA0E, Index(TEMP, 0x0E))\n Store (BA0F, Index(TEMP, 0x0F))\n Store (BA10, Index(TEMP, 0x10))\n Store (BA11, Index(TEMP, 0x11))\n Store (BA12, Index(TEMP, 0x12))\n Store (BA13, Index(TEMP, 0x13))\n Store (BA14, Index(TEMP, 0x14))\n Store (BA15, Index(TEMP, 0x15))\n Store (BA16, Index(TEMP, 0x16))\n Store (BA17, Index(TEMP, 0x17))\n Store (BA18, Index(TEMP, 0x18))\n Store (BA19, Index(TEMP, 0x19))\n Store (BA1A, Index(TEMP, 0x1A))\n Store (BA1B, Index(TEMP, 0x1B))\n Store (BA1C, Index(TEMP, 0x1C))\n Store (BA1D, Index(TEMP, 0x1D))\n Store (BA1E, Index(TEMP, 0x1E))\n Store (BA1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBA, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BA00)\n Store (DerefOf(Index(TEMP, 0x01)), BA01)\n Store (DerefOf(Index(TEMP, 0x02)), BA02)\n Store (DerefOf(Index(TEMP, 0x03)), BA03)\n Store (DerefOf(Index(TEMP, 0x04)), BA04)\n Store (DerefOf(Index(TEMP, 0x05)), BA05)\n Store (DerefOf(Index(TEMP, 0x06)), BA06)\n Store (DerefOf(Index(TEMP, 0x07)), BA07)\n Store (DerefOf(Index(TEMP, 0x08)), BA08)\n Store (DerefOf(Index(TEMP, 0x09)), BA09)\n Store (DerefOf(Index(TEMP, 0x0A)), BA0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BA0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BA0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BA0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BA0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BA0F)\n Store (DerefOf(Index(TEMP, 0x10)), BA10)\n Store (DerefOf(Index(TEMP, 0x11)), BA11)\n Store (DerefOf(Index(TEMP, 0x12)), BA12)\n Store (DerefOf(Index(TEMP, 0x13)), BA13)\n Store (DerefOf(Index(TEMP, 0x14)), BA14)\n Store (DerefOf(Index(TEMP, 0x15)), BA15)\n Store (DerefOf(Index(TEMP, 0x16)), BA16)\n Store (DerefOf(Index(TEMP, 0x17)), BA17)\n Store (DerefOf(Index(TEMP, 0x18)), BA18)\n Store (DerefOf(Index(TEMP, 0x19)), BA19)\n Store (DerefOf(Index(TEMP, 0x1A)), BA1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BA1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BA1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BA1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BA1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BA1F)\n }\n end; into device label EC0 code_regex BDAT,\s+256 replace_matched begin //BDAT, 256,\n BA00,8,BA01,8,BA02,8,BA03,8,\n BA04,8,BA05,8,BA06,8,BA07,8,\n BA08,8,BA09,8,BA0A,8,BA0B,8,\n BA0C,8,BA0D,8,BA0E,8,BA0F,8,\n BA10,8,BA11,8,BA12,8,BA13,8,\n BA14,8,BA15,8,BA16,8,BA17,8,\n BA18,8,BA19,8,BA1A,8,BA1B,8,\n BA1C,8,BA1D,8,BA1E,8,BA1F,8\n end; into method label SMBR code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into method label SMBR code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into device label EC0 insert begin Method (RDBB, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BB00, Index(TEMP, 0x00))\n Store (BB01, Index(TEMP, 0x01))\n Store (BB02, Index(TEMP, 0x02))\n Store (BB03, Index(TEMP, 0x03))\n Store (BB04, Index(TEMP, 0x04))\n Store (BB05, Index(TEMP, 0x05))\n Store (BB06, Index(TEMP, 0x06))\n Store (BB07, Index(TEMP, 0x07))\n Store (BB08, Index(TEMP, 0x08))\n Store (BB09, Index(TEMP, 0x09))\n Store (BB0A, Index(TEMP, 0x0A))\n Store (BB0B, Index(TEMP, 0x0B))\n Store (BB0C, Index(TEMP, 0x0C))\n Store (BB0D, Index(TEMP, 0x0D))\n Store (BB0E, Index(TEMP, 0x0E))\n Store (BB0F, Index(TEMP, 0x0F))\n Store (BB10, Index(TEMP, 0x10))\n Store (BB11, Index(TEMP, 0x11))\n Store (BB12, Index(TEMP, 0x12))\n Store (BB13, Index(TEMP, 0x13))\n Store (BB14, Index(TEMP, 0x14))\n Store (BB15, Index(TEMP, 0x15))\n Store (BB16, Index(TEMP, 0x16))\n Store (BB17, Index(TEMP, 0x17))\n Store (BB18, Index(TEMP, 0x18))\n Store (BB19, Index(TEMP, 0x19))\n Store (BB1A, Index(TEMP, 0x1A))\n Store (BB1B, Index(TEMP, 0x1B))\n Store (BB1C, Index(TEMP, 0x1C))\n Store (BB1D, Index(TEMP, 0x1D))\n Store (BB1E, Index(TEMP, 0x1E))\n Store (BB1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBB, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BB00)\n Store (DerefOf(Index(TEMP, 0x01)), BB01)\n Store (DerefOf(Index(TEMP, 0x02)), BB02)\n Store (DerefOf(Index(TEMP, 0x03)), BB03)\n Store (DerefOf(Index(TEMP, 0x04)), BB04)\n Store (DerefOf(Index(TEMP, 0x05)), BB05)\n Store (DerefOf(Index(TEMP, 0x06)), BB06)\n Store (DerefOf(Index(TEMP, 0x07)), BB07)\n Store (DerefOf(Index(TEMP, 0x08)), BB08)\n Store (DerefOf(Index(TEMP, 0x09)), BB09)\n Store (DerefOf(Index(TEMP, 0x0A)), BB0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BB0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BB0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BB0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BB0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BB0F)\n Store (DerefOf(Index(TEMP, 0x10)), BB10)\n Store (DerefOf(Index(TEMP, 0x11)), BB11)\n Store (DerefOf(Index(TEMP, 0x12)), BB12)\n Store (DerefOf(Index(TEMP, 0x13)), BB13)\n Store (DerefOf(Index(TEMP, 0x14)), BB14)\n Store (DerefOf(Index(TEMP, 0x15)), BB15)\n Store (DerefOf(Index(TEMP, 0x16)), BB16)\n Store (DerefOf(Index(TEMP, 0x17)), BB17)\n Store (DerefOf(Index(TEMP, 0x18)), BB18)\n Store (DerefOf(Index(TEMP, 0x19)), BB19)\n Store (DerefOf(Index(TEMP, 0x1A)), BB1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BB1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BB1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BB1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BB1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BB1F)\n }\n end; into device label EC0 code_regex BDA2,\s+256 replace_matched begin //BDA2, 256,\n BB00,8,BB01,8,BB02,8,BB03,8,\n BB04,8,BB05,8,BB06,8,BB07,8,\n BB08,8,BB09,8,BB0A,8,BB0B,8,\n BB0C,8,BB0D,8,BB0E,8,BB0F,8,\n BB10,8,BB11,8,BB12,8,BB13,8,\n BB14,8,BB15,8,BB16,8,BB17,8,\n BB18,8,BB19,8,BB1A,8,BB1B,8,\n BB1C,8,BB1D,8,BB1E,8,BB1F,8\n end; into method label SMBR code_regex \(BDA2, replaceall_matched begin (RDBB(), end; into method label SMBR code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex \(BDA2, replaceall_matched begin (RDBB(), end; # additional work for _BIX method present in some ASUS laptops into device label EC0 code_regex B0C3,\s+16 replace_matched begin XC30,8,XC31,8 end; into device label EC0 code_regex B1C3,\s+16 replace_matched begin YC30,8,YC31,8 end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B0C3, replaceall_matched begin (B1B2(^^LPCB.EC0.XC30,^^LPCB.EC0.XC31), end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B1C3, replaceall_matched begin (B1B2(^^LPCB.EC0.YC30,^^LPCB.EC0.YC31), end; # or could remove the _BIX method if it turns out not to work #into_all method label _BIX remove_entry; And the Brightness:
       
       
       
       
       
      #Maintained by: RehabMan for: Laptop Patches #graphics_PNLF_ivy_sandy.txt # This patch enables the brightness slider in SysPrefs->Displays # and will also enable activation of sleep mode by closing # the laptop lid. # # This particular version is intended to be used with ACPIBacklight.kext # although it can also be used with AppleBacklight.kext, # provided AppleBacklight.kext is patched to recognize your # display or an injector is used to set brightness levels. # # See this thread for more information: # http://www.tonymacx86.com/hp-probook-mavericks/121031-native-brightness-working-without-blinkscreen-using-patched-applebacklight-kext.html # (also read any linked threads) # # # Note: This patch should be applied to the DSDT or SSDT that defines # your integrated graphics device (always at _ADR 0x00020000) # into_all device label PNLF remove_entry; into_all device name_adr 0x00020000 code_regex (OperationRegion\s\(RMPC,\sPCI_Config[^\}]*\}) remove_matched; into device name_adr 0x00020000 insert begin OperationRegion (RMPC, PCI_Config, 0x10, 4)\n Field (RMPC, AnyAcc, NoLock, Preserve)\n {\n BAR1,32,\n }\n Device (PNLF)\n {\n // normal PNLF declares (note some of this probably not necessary)\n Name (_ADR, Zero)\n Name (_HID, EisaId ("APP0002"))\n Name (_CID, "backlight")\n Name (_UID, 10)\n Name (_STA, 0x0B)\n //define hardware register access for brightness\n // lower nibble of BAR1 is status bits and not part of the address\n OperationRegion (BRIT, SystemMemory, And(^BAR1, Not(0xF)), 0xe1184)\n Field (BRIT, AnyAcc, Lock, Preserve)\n {\n Offset(0x48250),\n LEV2, 32,\n LEVL, 32,\n Offset(0x70040),\n P0BL, 32,\n Offset(0xc8250),\n LEVW, 32,\n LEVX, 32,\n Offset(0xe1180),\n PCHL, 32,\n }\n // DEB1 special for setting KLVX at runtime...\n //Method (DEB1, 1, NotSerialized)\n //{\n // Store(Arg0, KLVX)\n //}\n // LMAX: use 0x710 to force OS X value\n // or use any arbitrary value\n // or use 0 to capture BIOS setting\n Name (LMAX, 0x710)\n // KMAX: defines the unscaled range in the _BCL table below\n Name (KMAX, 0x710)\n // KPCH: saved value for PCHL\n Name(KPCH, 0)\n // _INI deals with differences between native setting and desired\n Method (_INI, 0, NotSerialized)\n {\n // save value of PCHL for later\n Store(PCHL, KPCH)\n // determine LMAX to use\n If (LNot(LMAX)) { Store(ShiftRight(LEVX,16), LMAX) }\n If (LNot(LMAX)) { Store(KMAX, LMAX) }\n Store(ShiftLeft(LMAX,16), KLVX)\n If (LNotEqual(LMAX, KMAX))\n {\n // Scale all the values in _BCL to the PWM max in use\n Store(0, Local0)\n While (LLess(Local0, SizeOf(_BCL)))\n {\n Store(DerefOf(Index(_BCL,Local0)), Local1)\n Divide(Multiply(Local1,LMAX), KMAX,, Local1)\n Store(Local1, Index(_BCL,Local0))\n Increment(Local0)\n }\n // Also scale XRGL and XRGH values\n Divide(Multiply(XRGL,LMAX), KMAX,, XRGL)\n Divide(Multiply(XRGH,LMAX), KMAX,, XRGH)\n }\n // adjust values to desired LMAX\n Store(ShiftRight(LEVX,16), Local1)\n If (LNotEqual(Local1, LMAX))\n {\n Store(LEVL, Local0)\n If (LOr(LNot(Local0),LNot(Local1))) { Store(LMAX, Local0) Store(LMAX, Local1) }\n Divide(Multiply(Local0,LMAX), Local1,, Local0)\n //REVIEW: wait for vblank before setting new PWM config\n //Store(P0BL, Local7)\n //While (LEqual (P0BL, Local7)) {}\n If (LGreater(LEVL, LMAX))\n { Store(KLVX, LEVX) Store(Local0, LEVL) }\n Else\n { Store(Local0, LEVL) Store(KLVX, LEVX) }\n }\n }\n // _BCM/_BQC: set/get for brightness level\n Method (_BCM, 1, NotSerialized)\n {\n // initialize for consistent backlight level before/after sleep\n If (LNotEqual(PCHL, KPCH)) { Store(KPCH, PCHL) }\n If (LNotEqual(LEVW, 0x80000000)) { Store (0x80000000, LEVW) }\n If (LNotEqual(LEVX, KLVX)) { Store (KLVX, LEVX) }\n // store new backlight level\n Store(Match(_BCL, MGE, Arg0, MTR, 0, 2), Local0)\n If (LEqual(Local0, Ones)) { Subtract(SizeOf(_BCL), 1, Local0) }\n If (LNotEqual(LEV2, 0x80000000)) { Store(0x80000000, LEV2) }\n Store(DerefOf(Index(_BCL, Local0)), LEVL)\n }\n Method (_BQC, 0, NotSerialized)\n {\n Store(Match(_BCL, MGE, LEVL, MTR, 0, 2), Local0)\n If (LEqual(Local0, Ones)) { Subtract(SizeOf(_BCL), 1, Local0) }\n Return(DerefOf(Index(_BCL, Local0)))\n }\n Method (_DOS, 1, NotSerialized)\n {\n // Note: Some systems have this defined in DSDT, so uncomment\n // the next line if that is the case.\n //External(^^_DOS, MethodObj)\n ^^_DOS(Arg0)\n }\n // extended _BCM/_BQC for setting "in between" levels\n Method (XBCM, 1, NotSerialized)\n {\n // initialize for consistent backlight level before/after sleep\n If (LNotEqual(PCHL, KPCH)) { Store(KPCH, PCHL) }\n If (LNotEqual(LEVW, 0x80000000)) { Store (0x80000000, LEVW) }\n If (LNotEqual(LEVX, KLVX)) { Store (KLVX, LEVX) }\n // store new backlight level\n If (LGreater(Arg0, XRGH)) { Store(XRGH, Arg0) }\n If (LAnd(Arg0, LLess(Arg0, XRGL))) { Store(XRGL, Arg0) }\n If (LNotEqual(LEV2, 0x80000000)) { Store(0x80000000, LEV2) } \n Store(Arg0, LEVL)\n }\n Method (XBQC, 0, NotSerialized)\n {\n Store(LEVL, Local0)\n If (LGreater(Local0, XRGH)) { Store(XRGH, Local0) }\n If (LAnd(Local0, LLess(Local0, XRGL))) { Store(XRGL, Local0) }\n Return(Local0)\n }\n // Use XOPT=1 to disable smooth transitions\n Name (XOPT, Zero)\n // XRGL/XRGH: defines the valid range\n Name (XRGL, 40)\n Name (XRGH, 1808)\n // KLVX is initialization value for LEVX\n Name (KLVX, 0x7100000)\n // _BCL: returns list of valid brightness levels\n // first two entries describe ac/battery power levels\n Name (_BCL, Package()\n {\n 1808,\n 479,\n 0,\n 53, 55, 57, 59,\n 62, 66, 71, 77,\n 83, 91, 99, 108,\n 119, 130, 142, 154,\n 168, 183, 198, 214,\n 232, 250, 269, 289,\n 309, 331, 354, 377,\n 401, 426, 453, 479,\n 507, 536, 566, 596,\n 627, 660, 693, 727,\n 762, 797, 834, 872,\n 910, 949, 990, 1031,\n 1073, 1115, 1159, 1204,\n 1249, 1296, 1343, 1391,\n 1440, 1490, 1541, 1592,\n 1645, 1698, 1753, 1808,\n })\n }\n end;  
       
      It's done! Now go brush your teeth!
       
       
      To do list
       
      - Turn AppleHDADisabler in CloverEFI path.
      - Fix FN keyboard keys.
      - Turn Battery DSDT patch in CloverEFI path.
      - Test Cardreader.
      - Test USB3 port.
       
       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX and all others members involved directly or indirectly.
       
       
      EFI.zip
×