Jump to content
proteinshake

HD4000 full acceleration for 10.8 / 10.7.5

126 posts in this topic

Recommended Posts

I enabled VGA port on a GA-Z77X-UP5 TH editing AppleIntelFramebufferCapri binary to change the port.

 

I use AAPL,ig-platform-id: 01660003, injected via DSDT.

and edited AppleIntelFramebufferCapri binary at framebuffer @3 from this:

 

@0, 05 03 00 00 02 00 00 00 30 00 00 00 // (LVDS)

@1, 02 05 00 00 00 04 00 00 07 04 00 00 // (DisplayPort)

@2, 03 04 00 00 00 04 00 00 81 00 00 00 // (DisplayPort)

@3, 04 06 00 00 00 04 00 00 81 00 00 00 // (DisplayPort) - DETECTED 0x0 desktop

 

to this:

 

@0, 05 03 00 00 02 00 00 00 30 00 00 00 // (LVDS)

@1, 02 05 00 00 00 04 00 00 07 04 00 00 // (DisplayPort)

@2, 03 04 00 00 00 04 00 00 81 00 00 00 // (DisplayPort)

@3, 06 02 00 00 02 00 00 00 30 00 00 00 // (DisplayPort) - Working VGA - Version 1

 

this worked too:

 

@0, 05 03 00 00 02 00 00 00 30 00 00 00 // (LVDS)

@1, 02 05 00 00 00 04 00 00 07 04 00 00 // (DisplayPort)

@2, 03 04 00 00 00 04 00 00 81 00 00 00 // (DisplayPort)

@3, 06 02 00 00 01 00 00 00 30 00 00 00 // (DisplayPort) - Working VGA - Version 2

 

Chameleon SVN 2.1 r2064, GraphicsEnabler=No and GraphicsMode to match monitor resolution, Mountain Lion always detected the HD 4000, but without QE/CI.

Injecting platform Id get QE/CI enabled, and editing AppleIntelFramebufferCapri get video through VGA (i´ve only have a VGA monitor)

 

Thank you ,ac3bn,thank you very much . Now my HD4000 works perfectly with OS X 10.11.5 and a VGA monitor.

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By hornpipe2
      I have a Mac Mini 2006 (upgraded) with Intel GMA950 graphics, running MLPostFactor 10.8.5.  It is connected to an ASUS VS197 LCD panel using DVI-D.  This is natively a 1366x768 panel that is recognized and works fine.
       
      However, the other choices for resolution are 4:3 800x600 and 1024x768, and then the oddballs 832x624 and 1360x768.  None of these are useful as a low-resolution widescreen for gaming or watching DVD content.  Specifically I want to get access to 848x480 or 854x480, and also 1024x576.  SwitchResX makes these choices available, but it doesn't work with a "full screen" game, presumably because the game directly queries OSX Display to get a list of valid resolutions and SwitchResX is bypassing that system instead.
       
      So the solution is obvious: buy a new computer pull the monitor's EDID data, hack it to enable new resolutions, and then tell OSX to use this custom EDID instead of the one retrieved from the monitor.
       
      Following the steps of the EDID injection guide, here is where I am:
       
      * Retrieve EDID, DisplayVendorID etc from ioreg.
      00 FF FF FF FF FF FF 00 04 69 F2 19 24 94 00 00 31 16 01 03 80 29 17 78 EA F5 45 A4 55 50 9E 27 0F 50 54 BD EE 00 81 C0 01 01 01 01 01 01 01 01 01 01 01 01 01 01 66 21 56 AA 51 00 1E 30 46 8F 33 00 9A E6 10 00 00 1E 00 00 00 FD 00 32 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 41 53 55 53 20 56 53 31 39 37 0A 20 20 00 00 00 FF 00 43 43 4C 4D 54 46 30 33 37 39 32 34 0A 00 F1 * Use an EDID editor to enable new 848x477 and 1024x576 resolutions.  (Verify with an online EDID tool, and compare to the previous version)
      00 FF FF FF FF FF FF 00 04 69 F2 19 24 94 00 00 31 16 01 03 80 29 17 78 EA F5 45 A4 55 50 9E 27 0F 50 54 BD EE 00 81 C0 4B C0 4B CA 4B CF 61 C0 61 CA 61 CF 01 01 66 21 56 AA 51 00 1E 30 46 8F 33 00 9A E6 10 00 00 1E 00 00 00 FD 00 32 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 41 53 55 53 20 56 53 31 39 37 0A 20 20 00 00 00 FF 00 43 43 4C 4D 54 46 30 33 37 39 32 34 0A 00 47 * Create a new subfolder and plist within /System/Library/Overrides/Display/ containing the new EDID string and monitor name.
      * Reboot.
       
      Now the problems begin.  Even though the plist file is being read (which I know because the Monitor Name has changed in Displays), the custom EDID is not being used.  When I dig into IORegExplorer I am able to come up with AAPL00,EDID string and it is the unmodified one read from the monitor.  I even tried a plug-and-unplug while OSX is running, and also tried to reset the SMC and NVRAM, but no dice.
       
      Do I need to start digging into DSDT hacking?  Is the Intel driver pulling down EDID during boot and I need to override it somewhere else?  What am I missing here?
    • By lenny11
      I have that machine with an HP Advanced Docking Station. Everything else works great. I have 3 drives set up with OS X Sierra, Windows, and Linux. I can use three external monitors with Windows 10 and Ubuntu 16, works flawlessly. I also have a desktop Nvidia Hackintosh that can. The monitors are DELL U2410f DisplayPort(two monitors must be DP or Active Adapters for 3 screens to work). The machine is a rev 9 HD4000 with a 1600X900 panel.
       
      However OS X struggles to detect the third monitor. It will activate the third monitor and put it right to sleep.
      Docking station has
      DVI.  DVI
      DP.    DP
      (using DP)
       
      Notebook Has a DP out
       
      VGA never used, No HDMI
       
      I can use any combination of two screens, internal or external.
       
      Here is my frame buffer for starters, 
      Here is the original AppleCapriFrameBuffer: 09 00 66 01 01 03 03 03 00 00 00 04 . - 09/ 3 ports 00 00 00 01 00 00 00 60 10 07 00 00 - 10 07 00 00 00 00 00 00 00 00 00 00 - 00 00 00 00 50 29 04 00 00 00 00 00 - 01 00 00 00 02 00 00 00 30 00 00 00 - LVDS 02 05 00 00 00 04 00 00 07 01 00 00 - DVI 03 04 00 00 00 04 00 00 07 01 00 00 -DP I edited it to this, but did not really get a change: 09 00 66 01 01 03 04 03 00 00 00 04 - 4th port 00 00 00 01 00 00 00 60 10 07 00 00 10 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50 29 04 00 00 00 00 00 01 00 00 00 02 00 00 00 30 00 00 00 02 05 00 00 00 04 00 00 07 01 00 00 03 04 00 00 00 04 00 00 07 01 00 00 03 04 00 00 00 04 00 00 07 01 00 00 - Another dp? Is there anything else to try? I saw some stuff for desktop, but I'm not sure if it applies to notebooks.
      Thanks
    • By Newbie Mac
      Ciao a tutti,
      sono felicemente riuscito a installare Lion sul mio Optiplex 330.
      Funziona tutto tranne la scheda audio interna ma non importa perché vorrei installare una USB esterna: una Yamaha AG03.
      Dalle istruzioni questa dovrebbe essere installata su Lion senza driver e riconosciuta subito (http://www.yamahaproaudio.com/global/en/products/mixers/ag/manual/mac/index_en.jsp).
      Su un altro hackintosh sempre con Lion viene riconoscita perfettamente.
      Il sistema la vede, nel System Report, correttamente collegata all'USB ma da Audio Midi Setup mi dice "NO DEVICES FOUND".
      Temo che mi manchi qualche parte software per far riconoscere la scheda esterna.
      Ho installato i VoodooHDA ma mi hanno mandato in crash il sistema quindi li ho rimossi.
      Avete consigli?
      Grazie mille
       
      Retroman Newbie
       
    • By DaniiSwan
      Hello,
       
      I've been attempting for the past few days to install OS X Mountain Lion on my Lenovo Thinkpad Edge E530 with little success. So much so that I've finally decided I'm probably out of ideas and created this forum post requesting help.
       
      My Laptop Specs are:
       
      Intel Core i3-2328m (Sandy Bridge CPU at 2.2GHZ with support for SSE2 , SSE3 and SSSE3)
      8GB RAM
      500GB Hitachi Z7K500 HDD
      Lenovo 627226G Motherboard (Intel HM77 Chipset)
      Intel HD Graphics 3000
       
      More Detailed Specs ---> https://drive.google.com/open?id=0B-GXUa1I8xyDZU1SdklDSlhER2c
       
      So far , I've attempted to install iAtkos ML2 and ML3U via USB and so far both have worked up until the first sighting of the apple logo then the laptop restarted. In both cases , I was using a separate USB with chameleon bootloader on but in the instance where I tried to use the onboard bootloader on ML3U , I hit enter and the screen simply remained black.
       
      Any help would be much appreciated
       
      Thank you for your time.
    • By VanekMedia
      Hey all,
       I built my first Hackintosh back in 2012 and its been runner amazing. Thank you again for the awesome guides and forums that made it all possible. I have however hit the end of this builds software limits. I am still running 10.8.2 mountain lion on the machine. I would like to update to Sierra and want to make sure I am clear on the procedures. Now that it seems like everything is could based and no longer get physical versions of OS.
      currently i am backing up the system using and external drive and "carbon copy cloner" as shown here: http://www.macbreaker.com/2012/06/backup-your-hackintosh-with-carbon-copy.html
       
      My question is should i follow the set via the App store updates, Wipe the system and start over or is there a better way to achieve running Sierra on my machine?
       
      Here are my build specs:
      Processor name: Intel Core i7
      Processor Speed: 3.50 GHZ
      # of cores: 4
      memory: 32gb
      Boot rom version: insanelymac.com
      Graphics Card: Nivda GeForce GTX 670
      System Version: OSX 10.8.2 (12c60)
      i have also attached screen shots of the spec to further help:
       
      Thank you for taking the time to help me out with my build. look forward to getting this bad boy updated.
       
       
      Mahalo,
       
      -VM




×