Jump to content
InsanelyMac Forum
Sign in to follow this  
Rampage Dev

DSDT for X79 Motherboards

Recommended Posts

For the past few week my friends and I have been developing DSDT for Intel LGA 2011 x79 Motherboards. Development first started with Asus motherboards and now we have recently added Gigabyte motherboards. This is my blog that will provide all of the information about these DSDT.

 

http://rampagedev.wordpress.com/

 

If your x79 motherboard is not included on are blog please post your unedited DSDT, IOreg, and what GPU you were using at the time the DSDT was extracted. Post this information and files on here and we will work on it and add support as soon as we can. I can usually edit a basic DSDT within 30 minutes.

 

Motherboards Currently Supported:

 

All Asus Motherboards

All Gigabyte Motherboards

Limited AsRock Motherboards

Share this post


Link to post
Share on other sites
Advertisement

Just to let others know I successfully used HereToHelp's method to get my 3930K / Asus Rampage Extreme IV / HD 6870 build working. (I am in the process of finally updating my old Q6600 / GA-P35-DS4 build)

 

Thanks HereToHelp!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By MaLd0n
      Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder CLOVER Install.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder CLOVER Post Install.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By MaLd0n
      First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan and Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder CLOVER Install.zip   --Install EL Capitan / Sierra / High Sierra and boot into system! for Sierra/High Sierra you need a Processor with SSE4.1 instruction   Post Installation --Install Clover and replace with my folder CLOVER Post Install.zip   --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time! -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) and tell me what your hardware! -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609    My DSDT GA P35-DS3 DSDT.MaLd0n LGA775.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By dark_hacker
      I have a samsung NP530U3C extract DSDT by clover and made the edit following the guide https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/ I also did following this guide https: // www. tonymacx86.com/threads/fixing-brightness-with-custom-edid.219413/ the fix of my EDID and followed the guide to put the brightness to work https://www.tonymacx86.com/threads/guide-laptop-backlight -control-using-applebacklightinjector-kext.218222 / I have the brightness to work but I have a problem in the screen I leave the image to see the problem.
       
      Clover + IOREG + kextcache -i
       
      https://ufile.io/z61kh
       

    • By M3G4DR01D
      Hello everyone, I have an Asus gl502vmk (i7 kabylake + GTX 1060 6 gb) laptop and I tried all the patches/kexts to get the brightness with fn keys/touchpad (I2C ELAN 1200 works with VooDoo I2C kext v1.0 but no gestures/preference pane)/Keyboard backlight to work but no success so far, any help would be appreciated, thanks in advance.
      [EDIT] (10/04/2018)
      Battery status now works, thanks to @RehabMan turned out to be incorrect SMBIOS (used iMac instead of Mbp) lol, but it drains crazy fast (~1.5 - 2 hours while on standby (all apps quited!), on windows 10 it lasts 4 - 5 hours, and on linux it lasts 6 ~ 7 hours!)
      And with VoodooI2C v2.0.1 + VoodooI2CHID kext and patched DSDT, the touchpad is now detected in the sys pref pane but still no input.
      Sound works with VoodooHDA v2.9.1, but the only issue is that the jack sense isn't working (the output device doesn't auto switch to headphone when connected)
       
      [EDIT 2] (11/04/2018)
      The system brightness now works thanks to @onejay09 but I have no brightness slider, and there are 4 extra brightness levels (brightness stops increasing after 12 levels)  and the brightness keys are not mapped correctly, plus the brightness decreases when I plug in the ac adapter, then increases if I unplug it???, the brightness level isn't also saved after reboot.
      battery still drains crazy fast (~1.5 - 2 hours, even with brightness at 50%, so apparently it is a power management issue).
      and I also have shutdowns while in sleep mode (I tried darkwake=10 and darkwake-0 and darkwake=no)
       
      P.S. I have uploaded my new report files, thanks!
       
      Latest report files (11/04/2018): https://www95.zippyshare.com/v/AMOpP0AY/file.html
×