Finally I finished the installation of 10.14.6 on my Dell E5440. Everything works just fine, but HDMI will not work. Every time I plug it in, it causes a grey screen on my laptop monitor. Also on boot up. I attached my EFI Folder, maybe someone can help me. I searched a bit and read something about Azul Framebuffer Kext.
Thank you for helping.
I can not manage to install Catalina on this legacy Asus machine that runs Mojave fine. When the installer boots up, DiskUtility does not see the internal hard-drives, neither the master SATA one or the the slave, ATA one. I have discussed this already on the Clover section with Slice, he told that some kext seems to have changed from Mojave to Catalina, he told me to use IOReg. Since then, I have postponed my work on Catalina due to the issues regarding the Mojave supplemental updates.
I have decided to start a new topic in here, due to visibility reasons and some new turn. The latest version of the dosdude1 patcher for unsupported Macs, discussed on Macrumors forums, patches the installer so that DiskUtility sees the internal hard-drives, I am able to install Catalina but, on first boot, the OS gets into a kernal panic with the message ”still waiting for root device”. I have searched online for this error, I have found Information regarding previous macOS versions with solutions that seem to have little to no relevance for the present issue.
Before installation finishes, I receive a message like ”Installation finished on Macintosh HD Data”, instead of ”Installation finished on Macintosh HD”. I admit this split between the two in Catalina still confuses me, perhaps this is how it was suppose to be? Perhaps something that was suppose to end up on Macintosh HD ends in Macintosh HD Data?
I admit the DVD-Rom and hard-drives are wired kinda of weird by some guy in a PC service, he said this is the optimum combination, something the ATA hard-drive is slave to the DVD-Rom. Perhaps this causes confusion into Catalina? On Mojave this configuration was fine.
Probably the solution suggested by Slice is the best, to replace one or more kext from Catalina with the Mojave versions of them. I do not know yet how to identify and replace them. If any other solutions seem possible, I am open to them.
Asus P5P41TED motherboard.
Intel Core 2 Duo E 8500
2 gb ram DDR 3
after years I come back to Hackintosh. In the early days I played with ozmosis and my good old 4700k. Now I'm back and worked around a 100% working setup with enough power to get me through all my tasks like audio, video cut etc.
In this short tutorial I will guide you through BIOS Settings and give you access to my EFI Folder. This I do because I haven't found anything on the web for my setup. Maybe it will help some of you. When you follow the steps you will have a perfect running Hackintosh like I do have now
I've chosen the iMac 18,3 because of the easy integration of both Graphic Units and the support of HEVC.
CPU: Intel i7 9700k (Overclocked in Bios to 4,7 GHz)
SMBIOS: iMac18,3 (Because of Dedicated Graphics and HEVC Intel Support)
RAM: 32GB G.Skill Trident Z RGB DDR4-3200 DIMM CL16 (XMP Profile to 3200MHz)
Motherboard: MSI MPG Z390 GAMING PRO CARBON (MS-7b17) <- It's the model without WLAN/Bluetooth
Graphic Card: Sapphire RX580 Nitro+
Bluetooth & WLAN: Broadcom Card in PCI Adapter
What is working:
Almost everything! All USB Ports, Intel Power Management, Bluetooth, WLAN, LAN, Intel Graphics HEVC, Boot/Reboot, Sleep
What is not working:
Facetime & iMessage (Don't need it but I will come back to this)
1. Create Mojave 10.14.5 USB Drive | https://www.youtube.com/watch?v=9CZDXxKfodE&t=95s | Us this tutorial or search the forum
2. Load my EFI Folder: https://workupload.com/file/zkJ4zdQk
3. Go into your bios and use my settings in the Screenshot I attached
4. Boot from USB Stick | Install Mojave | Boot into Mojave (Check other Tutorials if you don't know how)
5. Generate Serials with Clover Configurator
6. Happy Hackintosh Life!
Kext I use:
AppleALC.kext | Needed for Sound
BrcmFirmwareData.kext | Needed for my WLAN/Bluetooth Card
BrcmNonPatchRAM2.kext | Needed for my WLAN/Bluetooth Card
BrcmPatchRAM2.kext | Needed for my WLAN/Bluetooth Card
CodecCommander.kext | Fix Problems after Sleep
CPUFriend.kext | Perfect Power Management for my CPU
CPUFriendDataProvider.kext | Perfect Power Management for my CPU
FakePCIID_Broadcom_WiFi.kext | Needed for my WLAN/Bluetooth Card
FakePCIID.kext | Needed for my WLAN/Bluetooth Card
FakeSMC.kext | Standard
IntelMausiEthernet.kext | Ethernet
Lilu.kext | Standard
USBInjectAll.kext | To fix all USB Ports
WhateverGreen.kext | Needed for graphics
If you have success with my little tutorial and EFI Build let me know! Hope you reach the desktop and will be happy!
[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, BroadwellBy MaLd0n
Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771 Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/ Install MacOS with Olarila Image, Step by Step, Install and Post Install
Mojave Full DSDT patch http://olarila.com/forum/viewtopic.php?f=59&t=6428 First... ***Update bios to last available version!*** If you need a full patched DSDT... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app Installation --Create a bootable copy of macOS Sierra / High Sierra / Mojave https://github.com/chris1111/Create-Install-Media/releases --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/ --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip --Install Sierra/High Sierra and boot into system! Post Installation --Install Clover and replace with my folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip --Reboot and activate video! Bingo! Now you need a fine tune! DSDT time! --DSDT Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
- 1 Generation Intel Processors, use Generate P and C States in config.plist
- 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
- 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
for check Power, Frequency, Temperature and Utilization, use it
Install Intel Power Gadget.pkg.zip
Install .app, select the required permission and reboot. Work in F1 / F2 keys!
*in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
Use DSDT + AppleAlc
--install Lan driver by Mieze
-Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/ -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/ -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/ --Links -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/ -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads It's time to Rock -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders! Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others! We're all here to have fun and learn from each other!