Jump to content
Welcome to InsanelyMac Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.


MSI H67A-G43 and DSDTs, Also Graphics

1 post in this topic

Recommended Posts

Greetings, everyone, and thank you for taking the time to read my thread.


I have a MSI H67A-G43 motherboard. I can install OS X and patch to 10.7.4 just fine, and using kexts I can get everything running. I suspect that by patching my DSDT I will be able to more cleanly utilize everything I have, and thus my adventure into DSDT patching.


I've never patched a DSDT before, though through Google and browsing the forums here I've gathered an idea of how it works and why it is the preferred method of handling things. My question concerns the model of my motherboard, the MSI H67A-G43.


My first question concerns my motherboard in particular and the differences between the MSI H67A-G43 and the P67A-643. They seem identical to me at first glance, save for the model number. Are they identical? Is there a difference? Google searching has netted no useful information.


Secondly, I was unable to find any DSDT patches for either the H-series or P-series 67A-G43. How are DSDT patches made, and is this something I am able to do myself and upload to the community? What kind of tribulations are involved?



Lastly, I am using a GeForce GTX 560 Superclocked from EVGA. I've noticed that my graphics are usually fluid until I open up Mission Control or go to look at my apps, opening a drawer thusly causing a lot of lag. I would suspect that my graphics card is very much powerful enough to handle these things, and the drop in FPS surprises me. Is there something else I can be doing to improve this situation? My FPS in games such as EVE Online is also astoundingly low, from 300+ FPS in Windows to ~20 in OS X.


Other than that, everything runs amazingly well. If I can get around these two topics of interest I think I'll be set for some time to come.



Thank you all in advance!


EDIT: Also, of note, I'm reading http://www.tonymacx8...p?f=168&t=34494 and I see here he uses the GeForce DP4 driver bundle. I don't know what that is, but according to him his FPS issues were resolved through that. He uses an 8800 series card, where as I use the GTX 560 SC. Does anyone know if that may have an affect on my FPS issue? Again, I don't really know what the DP4 bundle is.


EDIT 2: I did happen across this as well, http://www.tonymacx86.com/viewtopic.php?f=168&t=34494 -- I'll have to try that out to see how it goes. Will the DP4 bundle still be important? I'm still unsure what the DP4 bundle IS.


Some more research (amazing how posting a thread makes you research things more deeply in the mean time) thew up this: http://www.tomshardware.com/forum/285747-30-choosing-chipset-2600k


Evidently they are the same exact board, but the H series doesn't support overclocking and the P series doesn't support integrated graphics. So ultimately I'm guessing they're the same?

Edited by johncrist1988

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By onlyJRevenge
      Buonasera ragazzi,
      grazie all'aiuto di questo forum, sono riuscito qualche mese fa a configurare il mio portatile e ne sono pienamente soddisfatto. Ora mi è sorto un dubbio, per poter utilizzare la porta HDMI esterna per collegare il portatile ad un monitor cosa dovrei fare? Ho letto che c'è la possibilità che questo non possa essere possibile, per via del fatto che ho disabilitato la GTX950M e di conseguenza essa portava il segnale "all'esterno". A voi cosa risulta? Riuscireste a darmi una mano?
      Grazie anticipatamente.
    • By Pink Waters
      Hi guys, I have my dsdt.aml extracted from windows.
      I compiled just fine no errors, but when I try to add audio in it following this guide I get a lot of errors

      I am running High Sierra
      my audio is ALC889

      The errors are attached

    • By uzmi
      Para los usb 3 de mi placa uso un inyector USB_Series8_Injector.kext modificado para mis puertos.
      Deseo eliminar dicho inyector poniendo los datos de los puertos en el DSDT directamente pero no se si es posible ni como hacerlo.
      Tengo dos instalaciones en dos discos con 10.13.3 
      Uno con un DSDT basado en el que crea Clover y luego modificado para mi equipo.
      Otro con un DSDT basado en el de Pikeralpha y luego modificado para mi equipo
      ¿Podrían echarme una mano?
      Dejo el inyector o un SSDT-UIAC con los datos de los puertos.
      Muchas gracias.
    • By quattrofx
      Hi to all,
      I just wont to give inough informations on one place for all the people with same Hardware with
      costimization steps witch i have done. I have fast perfect working High Sierra 10.13.3 on my PC but
      still needs to be actualized thru the DSDT, because it ist the only way to get all the hardware 
      properly working.
      Gigabyte Z370 Aorus Ultra Gaming - BIOS F7h
      Intel i7-8700K (4.8GHz)
      Gigabyte GTX 1080 G1 Gaming  8G
      DDR4 64GB PC 3000 CL15 G.Skill KIT (4x16GB) 64GVR Ripjaws V
      Dual-Band PCI-e Adapter TP-Link TL-WDN4800
      Firewire PCI-e Digitus (Texas Instruments Chipset)
      Bluetooth 4.0 USB Dongle ASUS BT400 (Broadcom)
      PSU: LC-Power Metatron Prophecy 2 LC8750II V2.2, 750 Watt
      2 x NVMe SSD 960 Evo 500GB (Win10Pro & High Sierra 10.13.3)
      1 x SSD Crucial 500GB (Sierra 10.12.6)
      1 x 4TB Segate Barracuda SATA 3 (Multimedia)
      Tripple-boot Win10Pro, Sierra 10.12.6 & High Sierra 10.13.3
      Bios Settings:
      1.       M.I.T. → Advanced Memory Settings  Extreme Memory Profile(X.M.P.) : Profile1
      2.       BIOS → Fast Boot : Disabled
      3.       BIOS → LAN PXE Boot Option ROM : Disabled
      4.       BIOS → Storage Boot Option Control : UEFI
      5.       Peripherals → Trusted Computing → Security Device Support : Disable
      6.       Peripherals → Network Stack Configuration → Network Stack : Disabled
      7.       Peripherals → USB Configuration → Legacy USB Support : Auto
      8.       Peripherals → USB Configuration → XHCI Hand-off : Enabled
      9.       Chipset → Vt-d : Enabled
      10.   Chipset → Wake on LAN Enable : Disabled
      11.   Chipset → IOAPIC 24-119 Entries : Enabled
      Dedicated graphics card:
      1.      Peripherals → Initial Display Output : PCIe 1 Slot
      2.      Chipset → Integrated Graphics : Enabled
      Chipset → DVMT Pre-Allocated :128M   
      Wake for Ethernet Network access - Unchecked
      Enable Power Nap - Unchecked
      First step:
      I have a perfect Sierra 10.12.6 working on my HP Z800 witch i use to clone to one SSD
      Second step:
      Delete old EFI on cloned SSD and put the new one from here:
      Adjusted Kexts and Config.plist for my Rig:
      Kext Folder:
      FakeSMC.kext + Sensors Kexts
      Thread step:
      connected new cloned SSD on the SATA port and Sierra started up and working.
      Fourth step:
      regulary updated to HighSierra 10.13.3 running installer from App folder.
      Fifth step:
      Cloned Sierra SSD to NVMe SSD 960 Evo 500GB
      Made changes to BIOS & Config.plist to become hardware encoding acceleration  in FCPX and HEVC support:
      BIOS Gigabyte:
      §  Chipset → Integrated Graphics : Enabled
      §  Chipset → DVMT Pre-Allocated :128
      §  Peripherals → Initial Display Output : PCIe 1 Slot
      1.       Inject Kexts is set to Yes
      2.       In Boot Under Custom flags added:
      Nvidia users: shikigva=60
      3.       Kaby Lake & Coffee Lake Users:
      In Devices Using Nvidia 
      - Set ig-platform-id to: 0x59120003
      DSDT Patching:
      1.       HECI -> IMEI Patch
      1.       Comment: change HECI to IMEI
      2.       Find* [Hex]: 48454349
      3.       Replace [Hex]: 494d4549
      2.       GFX0 -> IGPU Patch
      1.       Comment: change GFX0 to IGPU
      2.       Find* [Hex]: 47465830
      3.       Replace* [Hex] : 49475055
      3.        PEGP -> GFX0 Patch
      1.       Comment: change PEGP to GFX0
      2.       Find* [Hex]: 50454750
      3.       Replace [Hex]: 47465830
      I think that in my Config.plist (used EFI from here https://hackintosher.com/guides/high-sierra-install-full-guide/  and edited by me)
      are the double entries, but i am not shure and i dont wont to make a mess myself.
      It is beter to leave it to the profis like Maldon!
      Maldon, i have attached my Send me iMac_4FX.zip file generated with RunMe.app
      Can you post the list of maded Patches for this RIG please.
      THX in advance
      Send me iMac_4FX.zip
    • By MaLd0n
        --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   Installation   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER Install.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER Post Install.zip   --Reboot   DSDT DSDT.MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC ----- -Disable GPU new patch and PNLF SSDT - Credits RehabMan

      SSDT    Generate your SSDT for PM, use ssdtPRGen by Piker-Alpha https://github.com/Piker-Alpha ssdtPRGen.command.zip   or just use "plugin-type"=0x01 in DSDT, SSDT or Clover config.plist   for check Power, Frequency, Temperature and Utilization, use it Install Intel Power Gadget.pkg.zip  
      https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/   -Atheros Ethernet https://github.com/Mieze/AtherosE2200Ethernet   -IntelGraphicsFixup https://sourceforge.net/projects/intelgraphicsfixup/   -IntelGraphicsDVMTFixup https://github.com/BarbaraPalvin/IntelGraphicsDVMTFixup   -USBInjectAll https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   Special Thanks to Pablo Galán   We're all here to have fun and learn from each other!   ENJOY!