I noticed some weird behavior with macOS High Sierra. This system was working just fine on Sierra 10.12.5, until I decided to update to High Sierra (10.13.3). The upgrade process went mostly fine I guess, but it got stuck in an infinite spinning wheel which would just keep overlapping. I went into verbose mode, and sure enough, I found "IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0" repeating over and over along with ACM errors... I'm really lost right now. I can boot in recovery mode and safe mode just fine, when the graphics drivers aren't loaded. Web drivers aren't installed. I installed NvidiaGraphicsFixup, but it didn't fix the issue. I tried deleting the native graphics drivers from macOS and installing web drivers, but it didn't help.
Graphics card: ASUS GT630-2GD3 (It's a Fermi card and it needs injection, so I modified my DSDT. Full graphics acceleration worked in Sierra. No Clover injection. I tried using Clover injection instead, I saw no difference.)
CPU: Intel Core i3-3210, iGPU disabled in UEFI
All kexts updated to their latest versions, along with Clover.
For more info, you can refer to the GitHub issue where I posted it. https://github.com/lvs1974/NvidiaGraphicsFixup/issues/3
Any help would be appreciated.
Thank you for your time!
I know veterans from the hackintosh community claimed that Intel HD 2500 is not supported and doesn't work, but mine (mobile version) works with High Sierra, as it did back with every versions since Mountain Lion.
I formerly started a topic here for ElCapitan : http://www.insanelymac.com/forum/topic/316981-intel-hd-graphics-ivy-b-hd-2500-qeci-for-osx-1011/
This should apply to any laptop with following CPU (mobile Ivy Bridge)
My Laptop is an Asus (F301A-RX229H) with an Intel Pentium Mobile 2020M, which includes an Intel HD Graphics, not labelled 2500, but it has 6 execution Units like the 2500, and approximately same clock settings (650-1100) instead of 650-1150 for HD2500. You can check specs here and here. Most importantly, it is identified by bootloader and MacOsX/macOS as "Intel HD Graphics 2500" and uses HD4000 kexts.
Few Graphic Glitches (windows title bar, dock...) solved by reducing transparency in Accessibility Preferences Panel.
I am attempting to install my first Hackintosh, and I am encountering significant issues. Currently, I am able to get to the installation screen but disk utility does not recognize (either of) my hard disks. Additionally, my touchpad and keyboard do not work (though my touchscreen does).
Here are my specs:
System Board: Dell 0knvcw
CPU: intel core-i7 3517U (Ivy Bridge) @1.9 gHz turbo @2.8 GHz
Graphics: Intel HD 4000, Discrete Nvidia GeForce GT 630M
Storage: 500 GB Western Digital WDC WD5000LPVT-75G33T0 HDD, 250 GB Samsung SSD 850 EVO mSATA (Intel RST mode on BIOS-possibly the source of the problem)
(I am trying to install to the HDD, currently in GUID mode with a windows installation on a ~200 GB partition)
Boot flags: -v
Kexts: Just FakeSMC and VoodooPS2Controller by RehabMan (located at Clover/kexts/10.12)
config.plist From RehabMan for HD Graphics 1366x768
I'm a newbie, so if anyone has a possible solution, please be clear on how to do it (i.e. LMK if it's a boot flag, a change to a kext or a change in a .plist).
I have an almost fully working Intel HD Graphics in ElCapitan.
At least QE & CI are working. I had graphic glitches in Dock background and windows titles, apparently due to my MBP9.2 SmBios (which I want to keep for Power Management reasons)
It's on an Asus Laptop (F301A-RX229H) with an Intel Pentium Mobile 2020M, which includes an Intel HD Graphics, not labelled 2500, but it has 6 execution Units like the 2500 series, and approximately same clock settings (650-1100) instead of 650-1150 for HD2500. You can check specs here and here. It seems like it's a lower end HD2500.
Vendor ID 8086 of course, Device ID 0156, rev 0009. I use chameleon with GraphicsEnabler=Yes, GraphicsMode=1366x768x32, IntelCapriFB=3 (with Moutain Lion, previous setup on the same laptop, with QE/CI too, required IGPlatformID=01660003)
I have vanilla AGPM and IntelGraphics kexts, SmBios MacBookPro 9.2, as mentionned before, and a custom DSDT, device is named GFX0.
Graphic Glitches were solved (accordingly to real macbookpro users forums) by reducing transparency in Accessibility Preferences Panel.