Jump to content
  • Announcements

    • Allan

      Forum Rules   04/13/2018

      Hello folks! As some things are being fixed, we'll keep you updated. Per hour the Forum Rules don't have a dedicated "Tab", so here is the place that we have our Rules back. New Users Lounge > [READ] - InsanelyMac Forum Rules - The InsanelyMac Staff Team. 
Sign in to follow this  

The easiest x58 motherboard to install 10.8 or 10.7

7 posts in this topic

Recommended Posts

What would you guys say is the easiest x58 motherboard to install 10.8 or 10.7 on? Preferably one with a video tutorial from beginning to end. I've tried for years to get 10.6/7 on my EVGA without success and now I just want easy sailing.

Share this post

Link to post
Share on other sites

The easiest X58 board to configure is a Gigabyte. However X58 boards are becoming extremely scarce. I have two X58A-UD3R boards and one X58-UD3R and they all configure easily. Only two special kexts are required for boot. To be fully functional two kexts are required for audio and one for ethernet. You will need a DSDT.aml for the board (google DSDT and you will find).


Use DigitalDreamers script to install (see his long thread in the Tutorials section). The first post contains the script download and explanation. His script will build a bootable USB from the iStore Lion app or .dmg (and also ML when it becomes available - will do the development versions today).


The only difference between Lion and MountainLion for install is the bootloader - earlier versions work only on Lion, later versions work for Lion and MountainLion (Chameleon r1820 and later works for both - I am using r1924 presently).


I presently use ATI 5770 video cards as they work OOB with GraphiceEnabler=Yes. I understand the 6870 cards work well. I cannot speak for Nvidia cards as I do not have any current cards in that family.

Share this post

Link to post
Share on other sites

Lionize and pretty much any Asus Board - http://www.insanelymac.com/forum/index.php?showtopic=267001


Supported board:

  • P6T Deluxe OK
  • P6T Deluxe V2 OK
  • P6TD Deluxe OK
  • P6T OK
  • P6T SE OK
  • P6T WS Professional OK
  • P6T7 WS Supercomputer OK
  • P6T6 WS Revolution OK
  • Rampage II GENE OK
  • Rampage II Extreme OK
  • Rampage III Extreme OK
  • P6X58D-E OK
  • P6X58D Premium OK
  • Rampage III GENE OK (Audio works with VoodooHDA)
  • Rampage Black Edition NEED TESTER FEEDBACK

Share this post

Link to post
Share on other sites

Look in my signature


I have near 100% functionality including 'Wake on Demand' and auto sleep.

The only things that may not work are a few of the audio inputs (never tested them so they might work).


There is a post by d00d in the DSDT section with instructions on how to get everything working.

Share this post

Link to post
Share on other sites

I have a 100% working install on a GA-X58-USB3. Processor is an i7 950, GPU is a GTX 560 Ti. myHack creates the basic stuff, and then install the official Realtek 81xx network kext, AppleHDA, HDA Rollback, and the non-DSDT enabler for the 892 in the current Lion version of Mu|tibeast.

Share this post

Link to post
Share on other sites

Like badaxe2 said most any Asus board. I'm running a almost vanilla install on my Asus Rampage II gene.

My specs are Intel i7 920

12 Gigs DDR 3 ram

Gtx 260

running Mac OSX 10.8 D4

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Posts

    • Hello! In my signature system the program does not show the life of the hard drives but only that of the ssd.   High Sierra 10.13.4
    • hello   try this one   DSDT.aml.zip   for graphics and backlight are needed ssdt files   good hack
    • Non ti ho messo io quelle impostazioni I sul config.. Poi aggiorna i kext.. 
    • So, i am thinking about pubblishing the stable release of tinu 2.0, just with a few minor chenges from the last pre-release, and to focus my work on the next one, i have just chenged a couple of UI things for the stable release and add a warning message if you try to use a time machine disk as a target drive to create the macOS install media, for the release that will come after the stable 2.0 release (and maybe also after a bug fix release for the 2.0 if needed) i am trying to use the system apis to manage the tasks which needs special priviladges to be executed, instead of the "sudo" based system which i am using now, this will make the application more secure and reliable, and also you will have to do the authentication only one time, when creating an install media, and using this system maybe i can also pubblish the application on the app store (obviusly just a limited version for mac users, but a version with all the features unlocked will be always available outside the app store and will have all the hackintosh-friendly features as well). But to do that i need to re-write a large amount of code into the app, because all the tasks which needs special permitions needs to be re-implemented differently, so that's why i do not want to use this in the 2.0 release, so because i am going to finish with tinu 2.0 tell me every complain or problem you are having with the latest pre-release or the latest release of tinu, so i can work on that before releaseing the stable 2.0 version
    • here it is,