Jump to content
Larx

10.7.4 is OUT !

158 posts in this topic

Recommended Posts

I updated from 10.7.2 to 10.7.4 using Combo update and so far everything going pretty smooth accept for my WiFi card. The kext I was using in 10.7.2 does not work in 10.7.4 for the Dell 1510 Mini-Card I have installed to replace the original installed into my Qosmio X500. I just get "no WIFI Hardware Installed" when I point the mouse over the Wireless icon on the top of screen.

Anyone has the same issue?

Any help will be welcome.

Thanks

 

I have the same card. I made a modified IO80211Family.kext. Try it out and see if it works for you.

 

IO80211Family.kext.zip

Share this post


Link to post
Share on other sites
Advertisement

Cant for the life of me get my kexts in order and copious amounts of deleting have left me with a system with terrible GFX performance out of my

Gigabyte GA-Z68X-UD5-B3 and Nvidia 560ti 1024.

 

 

My question is could someone tell me with Nvidia and Geforce kexts I should have in my S/L/E folder as I needed to delete a few just to get it to boot as with them in there, the system would have a funky graphics issue on continuous loop at the login screen.

 

I can post exactly what I deleted a little bit later if it will help. But if someone would kindly upload the new graphics as a base for editing on the new update (As I think I have replaced them) that would be awesome!

Share this post


Link to post
Share on other sites

here's a link to the retail drivers from nvidia... :whistle:http://www.nvidia.co...f06-driver.html (10.7.4)

 

Thanks, I have those but when I got to install it says it won't run on my system?

 

Which kexts am I likely missing? Also I still need to put the updated AppleGraphicsPowerManagement.kext in there if anyone has an updated one.

post-321125-0-74768400-1338201083_thumb.png

Share this post


Link to post
Share on other sites

 

 

Thanks, I have those but when I got to install it says it won't run on my system?

 

Which kexts am I likely missing? Also I still need to put the updated AppleGraphicsPowerManagement.kext in there if anyone has an updated one.

 

Which smbios you use?

Share this post


Link to post
Share on other sites

Which smbios you use?

 

Cracked it!!! I just hit 'Show Package Contents' and went to the payload pkg and ran that =) Now everything flawless again!!!

 

I

Share this post


Link to post
Share on other sites

 

 

Cracked it!!! I just hit 'Show Package Contents' and went to the payload pkg and ran that =) Now everything flawless again!!!

 

I

 

So?

You have resolve?

Share this post


Link to post
Share on other sites

 

 

Yep everything back working 100%. Thanks for offering to help though :)

 

Sorry , listen me please...but because you use nvidia driver and not grafic enabler in bootplist?

Share this post


Link to post
Share on other sites

i did the update and i lost ethernet , it shows i have no ethernet installed. my mobo is dg43gt with Intel Corporation 82567V-2 Gigabit for my ethernet. if anyone has any info please let me know. thank you.

Share this post


Link to post
Share on other sites

Sorry , listen me please...but because you use nvidia driver and not grafic enabler in bootplist?

 

Poi parlare anche in Italiano.

 

I used both. This is what I did

 

1. My kexts were broken. I could not boot because it would get to the login screen (Verbose) and all the graphics would go crazy.

2. I deleted geforce.kext, nvidia etc etc etc leaving only Hal100, and geforce.bundle for my card

3. This allowed me to boot into my computer with 1024x768 resolution and minimal card performance.

4. I then used geforce5XX enabler installer for 10.7.2 (I actually have no idea if this did anything or not)

5. I then replaced NVHal100, geforce.bundle (Which was patched previously for my graphics card 560ti and fermi etc) and ApplePowerManagement

6. Rebooted, and my graphics card was coming up listed as a 440 GT with less than desirable performance.

7. Deleted Natit.kext, and extracted the installer from the above Nvidia link (As running it normally said it wasn't able to install)

 

Rebooted and voila. Resolution back, proper card and max performance with QE/Ci and fermi.

Share this post


Link to post
Share on other sites

i did the update and i lost ethernet , it shows i have no ethernet installed. my mobo is dg43gt with Intel Corporation 82567V-2 Gigabit for my ethernet. if anyone has any info please let me know. thank you.

 

Restore IONetworkingFamily.kext from 10.7.3, see if that makes a difference.

Share this post


Link to post
Share on other sites

Gigabyte GA-EP43-UD3L updated (I'm always lazy when it comes on to software updates)

 

Had to patch AppleHDA like usual and run a perl command to get my 6870 back into motion. I must say though, these updates just keep getting smoother and smoother..

Share this post


Link to post
Share on other sites

Here another spaghetti-pizza-mandolino speaking :D

 

Just updated to 10.7.4 on my inspiron 1545.

After software update I've got KP so I rolled back my AppleACPIPlatform.kext, IOPCIFamily.kext (I don't really know if it was necessary), and IO80211Family.kext to the 10.6.7 versions and the AppleHDA.kext to the 10.6.2 version.

Now everything's back ok.

 

Tried new version of IO80211Family.kext with the old AppleAirPortBrcm4311.kext plugin with my dev id but I've got no wifi card was detected.

Share this post


Link to post
Share on other sites

Upgraded from 10.7.3 on my HP 6730b:

- KP with ACPIThermal.kext (removed).

- KP with AppleHDA.kext (removed).

- Rebuild system caches and all went fine except:

- Battery has "X" sign (VoodooBattery)

 

in kernel log: AppleACPIBatteryManager:getBatteryBST(0xE00002BC) continuoslly ... still investigating.

Share this post


Link to post
Share on other sites

Thx for the advice. The error msg stopped but the battery icon still has the X symbol.

Also, I get KP with some apps like "System Info" and also if I try to list the loaded kexts from within Kext Wizard app. Sounds like this KP occurs with some data scanning actions. This is the kernel log for the KP:

 

 

Resetting IOCatalogue.

USBF: 3044.501 AppleUSBEHCI[0xf970800]: unable to get filterInterruptEventSource

USBF: 3044.501 AppleUSBEHCI[0xf970800]::UIMInitialize - Error occurred (0xe00002be)

USBF: 3044.503 AppleUSBEHCI[0xf62a000]: unable to get filterInterruptEventSource

USBF: 3044.503 AppleUSBEHCI[0xf62a000]::UIMInitialize - Error occurred (0xe00002be)

 

Any other good advice ? :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By JavadEd
      Hi, I have a lot of problems and could not find a right place to publish a topic, than I posted here ///
       
      2 years ago with modified bios, I install a mac on asrock h61m-u3s3...
      2 days ago, I had a 10.7.4 mac. I pulled off the drive and installed new hdd to for installing mavericks. 
      at the begin of installing my pc reboots every time with any flag. I searched and somebody said that with updating bios, your problem will be solved. 
      I did it! and start installing , at the begin of installing it hanged at these lines. these are last 3 lines
       
      init
      probe 
      start
       
      I tried to boot my old mac. But I got kp at : nullcpupowermanagement.kext start:;;
      I installed XP and macdrive. I moved above kext somewhere else and try to boot again, it hanged a line before the above line. 
       
      I dont know what to do. any suggestion for me?
      I just want one of them ...install new one or having my old one.
       
      tnx a lot for your time and sorry for any mistake in my writing 
       
    • By Frank Nitty
      I have successfully been able to boot into 10.7.4 with my 660/680 GPUs, surpassing many KPs by finding solutions online but the resolution is in VGA mode which is depressing (lol, not really). From what I know, Apple doesn't plan on supporting older OSs with the newer hardware, so I am asking the help from the hackintosh community to lead me to a patch that would allow me to utilize the native resolution of the GTX 6XX in Lion. Any useful help is appreciated, thanks.
    • By erjaquer
      Buenas amigos del foro
       
      Desde hace tiempo uso hackintosh en mi pc y las que le he montado osx86 siempre han sido con retail e ###### pero esta vez se me presento un reto realmente bueno, yo soy musico y tengo una portatil vit m2421 que recien compre hace unos dias y he tratado de instalarle lion de las mil y un maneras sera que me pueden hechar una mano?
    • By cym0ej12
      Hello everyone,
       
      I'm trying to figure out why my card doesn't work anymore after updating my mac installation from 10.7.2 to 10.7.4 using a combined version of the mac I downloaded from apple.com.
       
      My network card is a Realtek RTL8168. I've tried different kexts and packages so far but to no success. I had 10.7.4 installed before and I managed to make it work very easily last time. I just installed a kext using the ###### app.
       
      I have built and rebuilt the permission over and over again. Still no success.
       
      Does anyone have any suggestions to what else I should try to make it work?
       
      Thanks in advance.
       
      Just in case you need my computer information:
      Compaq CQ61-112SL (kinda bad )
      Graphics: GMA4500HD - Mobile Intel 4 Series Chipset Family
      Wireless: AR5007 802.11 b/g (can't make this work either)
      Ethernet: Realtek RTL8168
      CPUs: 2 X Intel Pentium Dual CPU T3400 @2.16GHz
    • By kalyiatkos
      I had Lion working with my Intel HD 3000 Graphics (DEV 0x0116) and after the 10.7.4 update it boots fine and then flashes blue for a second and goes blank. If HDMI is plugged the screen comes alive and works till next reboot. This is a vanilla install using the latest FakeSMC and Chimera.
×