Jump to content
Larx

10.7.4 is OUT !

158 posts in this topic

Recommended Posts

Maybe after first patch the kernel cache wasnt updated? I always use kextwizard to update the kernel cache after i change something in the .kext (.plist or patch).

 

Yeah. Issue was in next cache. Originally I rebuild caches by cmd line. This time I used next wizard and indeed now all is OK.

Thx for help !!!

Share this post


Link to post
Share on other sites
Advertisement

Hi,

 

I'm stuck after "DMOS has arrived " on my dell XPS M1330 (with Nvidia 8400 GS chipset). First, I need to replace the IOPCIFamily.kext (by the "Mountain Lion compatible" one provided by Netkas) to avoid the infinite [PCI Configuration begin/end] (as npci=0×2000 and npci=0×3000 didn't' change anything - I never had this issue before).

 

Now, no luck after the "DMOS has arrived" (no change after being stuck 10 hours so, it's not a question of time LOL). And no idea how to solve it... First google pointed a possible issue about the video card, however, the Nvidia one was correctly recognized previously (via DSDT or injection with chameleon)... So, it seems to be elsewhere...

 

Note that I've got the same issue on 10.7.4, or in my test to install Mountain Lion.

 

I'm open to all suggestions ;).

Share this post


Link to post
Share on other sites

from Apple Support Communities

 

 

All those errors you pasted are just the result of some application asking the kernel for a SMC sensor that does not exist, e.g.: on the first line you pasted is asked for the IN0C sensor.

 

Previously the kernel did not log errors when asked about SMC sensors it does not have, this is what changed in 10.7.4

 

I'm still using iStat Menus 3 eventhough I get the SMC log errors and the app along with OS X are working fine.

Share this post


Link to post
Share on other sites

Thanks robertx for digging that out, that makes perfect sense. And yes everything seems to work fine sensors-wise, just like in 10.7.3.

My smc errors;

May 14 01:03:32 Gringos-Mac-Pro kernel[0]: SMC::smcReadKeyAction ERROR $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
May 14 01:03:32 Gringos-Mac-Pro kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode

I also get a ton of these, for different smc keys:

May 14 00:44:02 Gringos-Mac-Pro kernel[0]: SMC::smcReadKeyAction ERROR TC0H kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff800b3cf800

Ran combo update, patched AppleHDA with HDAWizard, ran Perl script for patching AppleRTC, installed f06 nvidia drivers, rebuilt caches, everything seems fine so far.

I can't believe how easy it is to install and update compared to the old days.

Thanks to David F. Elliott, everyone working on or contributing to Chameleon, and to the authors of fakesmc.

 

ICH10R/P45/Core 2 Duo E8500/GTX460

Share this post


Link to post
Share on other sites

Hi,

 

I'm stuck after "DMOS has arrived " on my dell XPS M1330 (with Nvidia 8400 GS chipset). First, I need to replace the IOPCIFamily.kext (by the "Mountain Lion compatible" one provided by Netkas) to avoid the infinite [PCI Configuration begin/end] (as npci=0×2000 and npci=0×3000 didn't' change anything - I never had this issue before).

 

Now, no luck after the "DMOS has arrived" (no change after being stuck 10 hours so, it's not a question of time LOL). And no idea how to solve it... First google pointed a possible issue about the video card, however, the Nvidia one was correctly recognized previously (via DSDT or injection with chameleon)... So, it seems to be elsewhere...

 

Note that I've got the same issue on 10.7.4, or in my test to install Mountain Lion.

 

I'm open to all suggestions ;).

 

Same here: I´m on 10.7.3 and after updating it stalls at the point where it should load the GUI, no errors, CPUPMClient loads and thats it: it just doesn´t load the GUI :(

Share this post


Link to post
Share on other sites

updated and opencl is broken now.

 

luxmark gives me OpenCL ERROR: clBuildProgram(-11) error with my 6850 card.

 

some ati cards give this error within 10.7.4 update as Ive seen from other forums.

 

and no fix yet I guess...

same here so i went back to 10.7.3

Share this post


Link to post
Share on other sites

Work for me without problem....

1. Run sofwate update

2. Patched AppleHDA with HDAWizard

3. Run Perl script for patching AppleRTC

4. Rebuilt caches.

Share this post


Link to post
Share on other sites

For OpenCL errors (Luxmark). Try other OpenCL Benches like Galaxies or OceanWave , perhaps Luxmark has some incompatibility to new 10.7.4 OpenCL drivers, and works in general.

For my NVIDIA OpenCL stay working with 10.7.4 in all OpenCL Benches.

netkas has some fixes for OpenCL 10.7.4 + AMD 48xx cards - not helps normally working AMD 5xxx cards. ;aybe you ask, if all OpemCL Benches fail with AMD 5xxx in the netkas thread 10.7.4.

http://netkas.org

Share this post


Link to post
Share on other sites

Updated from apple software update crashed my mac (my bad), replaced AppleACPIPlatform.kext (10.7.2) and AppleGraphicsPowerManagment.kext (for GTX570)

All ok now. .

Share this post


Link to post
Share on other sites

Updated my Sager laptop from 10.7.3 to 10.7.4 yesterday. Everything works without a problem EXCEPT the WiFi. System doesn't recognize it, says WiFi adapter not installed. The WiFi card isDell 1395 and it woked fine with 10.7.3. Any ideas please??

Share this post


Link to post
Share on other sites

For OpenCL errors (Luxmark). Try other OpenCL Benches like Galaxies or OceanWave , perhaps Luxmark has some incompatibility to new 10.7.4 OpenCL drivers, and works in general.

For my NVIDIA OpenCL stay working with 10.7.4 in all OpenCL Benches.

netkas has some fixes for OpenCL 10.7.4 + AMD 48xx cards - not helps normally working AMD 5xxx cards. ;aybe you ask, if all OpemCL Benches fail with AMD 5xxx in the netkas thread 10.7.4.

http://netkas.org

 

After the update you did not have to change the hex values on the updated nvidia graphics kexts or does the update leave them alone?

Share this post


Link to post
Share on other sites

Updated from 10.7.3 to 10.7.4 from software update as always but this time got a kernel panic from AppleIntelCPUpowermanagement...thought I had to do a clean install but gave it a shot and booted into windows and used trasmac to detele the kext and rebooted and it worked. Geekbench test is down by at least 2000 points and boot time is up by at least 5 seconds. Usually when it got to the spinning wheel it only took 1 and a half rotation to boot into OS but now it spins like 12 times. This looks more like a downgrade then an update

Share this post


Link to post
Share on other sites

After the update you did not have to change the hex values on the updated nvidia graphics kexts or does the update leave them alone?

*

...Gt 520 here...had to re-apply the fixes for nvidia after the update (same changes from 10.7.3 apply to 10.7.4)

Share this post


Link to post
Share on other sites

*

...Gt 520 here...had to re-apply the fixes for nvidia after the update (same changes from 10.7.3 apply to 10.7.4)

 

So you applied the changes to the

"libclh.dylib"

from Thread:

 

http://www.insanelym...pic=266318&st=0

 

And

netkas opencl fix for the GeoforceGLdriver binary as well? Is it the same hex edit as in10.7.3 for the GeoFroceGLdriver or something changed or different in 10.7.4?

 

Thanks

Share this post


Link to post
Share on other sites

..same edit as in 10.7.3...

 

Find

EB A8 83 F8 02 7C 15

replace 02 with 03 to get

EB A8 83 F8 03 7C 15

Find

78 E8 83 F8 02 7C 11

replace 02 with 03 to get

78 E8 83 F8 03 7C 11

Share this post


Link to post
Share on other sites

Updated my Sager laptop from 10.7.3 to 10.7.4 yesterday. Everything works without a problem EXCEPT the WiFi. System doesn't recognize it, says WiFi adapter not installed. The WiFi card isDell 1395 and it woked fine with 10.7.3. Any ideas please??

 

I have the same problem! Just updated to 10.7.4 and everything works, except the Wi-Fi! I have Dell Inspiron 1525 with the same Wi-Fi Card! When I boot in verbose It shows that it loads the driver, but then when I boot it says that it's not installed! Anyone got this sorted out?

Share this post


Link to post
Share on other sites

Lost Ethernet on my P5K-E after updating to Lion 10.7.4. Still no joy here after trolling the forums all night for a solution. System Information reports the Yukon 88E8056, but System Preferences tells me the cable is not plugged in. All was well under 10.7.3, and an alternate boot drive runs all under SL 10.6.8.

 

All suggestions and tips will be appreciated. Thanks in advance.

Share this post


Link to post
Share on other sites

10.7.4 without an issue on:

 

MB: Gigabyte EP45T-UD3LR

CPU: Intel E8400

Memory: 4GB Kington 1333MHz

Video: Asus EN9800GT (NVidia 9800GT 512MB)

Apple Peripherials

Share this post


Link to post
Share on other sites

Lost Ethernet on my P5K-E after updating to Lion 10.7.4. Still no joy here after trolling the forums all night for a solution. System Information reports the Yukon 88E8056 (...)

 

I have the same 88E8056 and it works fine in 10.7.4. Make a legacy kext for it, I believe this still works:

http://www.insanelym...howtopic=157881

 

Also there's this that you can use instead of EthernetBuiltIn=y

http://www.projectosx.com/forum/index.php?showtopic=60

(read the whole thread first!)

Share this post


Link to post
Share on other sites

DiamondSami,

 

I tried loading IO80211Family.Kext using Kext Wizard and/or other kext utilities but it will not load. Tried loading with Command Line, same problem. Will work on some more and report.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By JavadEd
      Hi, I have a lot of problems and could not find a right place to publish a topic, than I posted here ///
       
      2 years ago with modified bios, I install a mac on asrock h61m-u3s3...
      2 days ago, I had a 10.7.4 mac. I pulled off the drive and installed new hdd to for installing mavericks. 
      at the begin of installing my pc reboots every time with any flag. I searched and somebody said that with updating bios, your problem will be solved. 
      I did it! and start installing , at the begin of installing it hanged at these lines. these are last 3 lines
       
      init
      probe 
      start
       
      I tried to boot my old mac. But I got kp at : nullcpupowermanagement.kext start:;;
      I installed XP and macdrive. I moved above kext somewhere else and try to boot again, it hanged a line before the above line. 
       
      I dont know what to do. any suggestion for me?
      I just want one of them ...install new one or having my old one.
       
      tnx a lot for your time and sorry for any mistake in my writing 
       
    • By Frank Nitty
      I have successfully been able to boot into 10.7.4 with my 660/680 GPUs, surpassing many KPs by finding solutions online but the resolution is in VGA mode which is depressing (lol, not really). From what I know, Apple doesn't plan on supporting older OSs with the newer hardware, so I am asking the help from the hackintosh community to lead me to a patch that would allow me to utilize the native resolution of the GTX 6XX in Lion. Any useful help is appreciated, thanks.
    • By erjaquer
      Buenas amigos del foro
       
      Desde hace tiempo uso hackintosh en mi pc y las que le he montado osx86 siempre han sido con retail e ###### pero esta vez se me presento un reto realmente bueno, yo soy musico y tengo una portatil vit m2421 que recien compre hace unos dias y he tratado de instalarle lion de las mil y un maneras sera que me pueden hechar una mano?
    • By cym0ej12
      Hello everyone,
       
      I'm trying to figure out why my card doesn't work anymore after updating my mac installation from 10.7.2 to 10.7.4 using a combined version of the mac I downloaded from apple.com.
       
      My network card is a Realtek RTL8168. I've tried different kexts and packages so far but to no success. I had 10.7.4 installed before and I managed to make it work very easily last time. I just installed a kext using the ###### app.
       
      I have built and rebuilt the permission over and over again. Still no success.
       
      Does anyone have any suggestions to what else I should try to make it work?
       
      Thanks in advance.
       
      Just in case you need my computer information:
      Compaq CQ61-112SL (kinda bad )
      Graphics: GMA4500HD - Mobile Intel 4 Series Chipset Family
      Wireless: AR5007 802.11 b/g (can't make this work either)
      Ethernet: Realtek RTL8168
      CPUs: 2 X Intel Pentium Dual CPU T3400 @2.16GHz
    • By kalyiatkos
      I had Lion working with my Intel HD 3000 Graphics (DEV 0x0116) and after the 10.7.4 update it boots fine and then flashes blue for a second and goes blank. If HDMI is plugged the screen comes alive and works till next reboot. This is a vanilla install using the latest FakeSMC and Chimera.
×