Jump to content

1,081 posts in this topic

Recommended Posts

P.S. dimmi sposto i vari post se sono OT

 

Non è un problema...

può essere di riferimento per gli altri. Lascimoli dove sono...

Anzi se trovi i link sull'internazionale li possiamo mettere come nota informativa...

 

Fabio

Share this post


Link to post
Share on other sites
Advertisement

Grazie ci do un occhiata.

 

Ho una domanda :

 

Scheda video HD 6750 quando parte al boot mi vede in pieno lo schermo 1920x1080 fino alla pass

scheda video GTX 470 mi vede lo schermo con i bordi neri come se la risoluzione è 1680x1050 alla pass lo vede in pieno.

Questo dipende dal boot

 

Fabio

Share this post


Link to post
Share on other sites

Ciao fabio, ho notato adesso che la mia scheda wifi è impostata su en1, mentre l'ethernet è su en0, questo può influire sul fatto che imessage non si connette?

Un piccolo off-topic: meglio una scheda wifi ar9285 o una ar9287, quali delle 2 è migliore e perchè? grazie e scusate per l'OT.

Share this post


Link to post
Share on other sites

Ciao cili0

come suggerito da un utente sulla pagina internazionale (non ho provato)

da terminale:

sudo nvram -d boot-args

 

Ciao Fabio,

 

grazie del suggerimento, proverò. Ma questo vuol dire che l'implementazione via software della NVRAM è completo?

Share this post


Link to post
Share on other sites

Niente da fare, anche cancellando il parametro di boot-args non funziona (in realtà ho provato a cancellarli tutti). Inoltre, mi è capitato in due accensioni consecutive che il computer improvissamente entrasse in uno stato inusabile (ventole ancora che vanno, ma nessun segnale video e computer non presente nella rete locale).

 

Fabio, mi citavi un post nella sezione internazionale, intendi quello di enoch? qualche suggerimento?

 

grazie.

Share this post


Link to post
Share on other sites

Ciao cili0.

Gli autori del modulo FileNVRAM.dylib hanno aggiornato alla versione 1.1.1

http://www.insanelymac.com/forum/topic/286258-filenvram-111-released/

Si consiglia di aggiornare tale modulo.

----

il comando per "azzerare" i valori delle flag al boot causato dal nvram proveniva da qui post #1552 (nyolc8)

 

Fabio

Share this post


Link to post
Share on other sites

Proverò ad aggiornare allora. Da una rapida scorsa sembra che il problema in quel caso fosse una persistenza non voluta dei parametri di boot. Nel mio caso invece sembra che non riesca a bootare in presenza di kernelcache.

 

Tenterò l'aggiornamento comunque,

grazie.

Share this post


Link to post
Share on other sites

ariecchime.. come sempre super preso..

comunque, enoch perfetto, mai un problema, boota windows 8!!

ora installo l'ultmia branch

 

 

 

Enoch (r2176) [2013-01-31 11:00:55]

cpu freq classic = 0x000000006fc305e0

msr(524): ia32_perf_stat 0x06000615

max: 6 current: 6

---------------------------------------------

CPU: Brand String: Genuine Intel® CPU U2300 @ 1.20GHz

CPU: Vendor/Family/ExtFamily: 0x756e6547/0x6/0x0

CPU: Signature: 1067a

CPU: Model/ExtModel/Stepping: 0x17/0x1/0xa

CPU: MaxCoef/CurrCoef: 0x6/0x6

CPU: MaxDiv/CurrDiv: 0x0/0x0

CPU: TSCFreq: 1875MHz

CPU: FSBFreq: 313MHz

CPU: CPUFreq: 1875MHz

CPU: Number of CPU Cores: 2

CPU: Number of CPU Threads: 2

CPU: Features: 0x0000034f

---------------------------------------------

Module 'Symbols.dylib' by 'Chameleon' Loaded.

Description: Chameleon symbols for linking

Version: 0

Compat: 0

Module 'ACPICodec.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Module 'KernelPatcher.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Module 'klibc.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Module 'Resolution.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Buffer location: 0x1000F8CA status: 0

0x00 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0x00 0x05 0xE3 0x50 0x22 0xAF 0x44 0x00 0x00

0xFF 0xFF 0xFF 0x00 0xE3 0x22 0x44 0x00 0x15 0x03 0x30 0x78 0x9D 0xA2 0x54 0x27

0xFF 0xFF 0x05 0x22 0x00 0x15 0x80 0x78 0x80 0x54 0x0E 0xBF 0xD1 0x00 0x81 0x40

0xFF 0x00 0x22 0x00 0x03 0x78 0xA2 0x27 0xBF 0xC0 0x00 0x40 0x01 0x3A 0x38 0x2C

0xFF 0xE3 0x00 0x03 0x2A 0x54 0x54 0xC0 0x81 0xC0 0x02 0x38 0x45 0x00 0x00 0x1E

0xFF 0x22 0x15 0x78 0x54 0xBF 0x00 0x40 0x01 0x38 0x00 0x1E 0x32 0x0A 0x20 0x32

0xFF 0x44 0x80 0xA2 0x54 0x00 0x81 0x3A 0x58 0x00 0x00 0x0A 0x00 0x35 0x20 0xFF

0x00 0x00 0x78 0x27 0xC0 0x40 0x3A 0x2C 0x1E 0x1E 0x20 0x32 0x20 0xFF 0x41 0xF3

getResolution: 1920x1080x32

Module 'Sata.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Module 'uClibcxx.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Loading Darwin 10.8

Loading kernel cache /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache

kernel_patcher.c[534]: Patching 64bit XNU Kernel 12.2.0

Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; *patched-2050.18.24~1/RELEASE_X86_64

commpage_patch.c[87]: _commpage_stuff_routine patched.

lapic_patch.c[76]: lapic_init panic removed.

bootstrap_patch.c[167]: KLDBootstrap::readBooterExtensions() call injected into KLDBootstrap::readPrelinkedExtensions(void* section_64)

Using PCI-Root-UID value: 0

LAN Controller [10de:0ab0] :: PciRoot(0x0)/Pci(0xa,0x0)

Setting up lan keys

ATI Framebuffer Addr: @0xE0000000 MMIO Addr: @0xFEAE0000 I/O Port Addr: @0x0000D000 ROM Addr: @0xFEAC0000

ATI card POSTed, reading Video BIOS from legacy space

Framebuffer set to: Bulrushes using AtiConfig=Bulrushes

Number of ports set to: 3 using AtiPorts=3

AMD Radeon HD 6450 512MB [1002:6779] (subsys [174b:e164]) (Caicos:Bulrushes) :: PciRoot(0x0)/Pci(0xc,0x0)/Pci(0x0,0x0)

CPU is Genuine Intel® CPU U2300 @ 1.20GHz, family 0x6, model 0x17

Type: 0, Length: 24, Handle: 0x0

BIOSInformation:

vendor: Apple Inc.

version: MBP81.88Z.0047.B24.1110141131

releaseDate: 10/14/11

Type: 1, Length: 27, Handle: 0x1

SystemInformation:

manufacturer: Apple Inc.

productName: Macmini5,1

version: 1.0

serialNumber: C07G3VUFDJD0

uuid: 00020003-0004-0005-0006-000700080009

wakeupReason: 0x6

skuNumber: To Be Filled By O.E.M.

family: Macmini

Type: 2, Length: 15, Handle: 0x2

BaseBoard:

manufacturer: Apple Inc.

product: Mac-8ED6AF5B48C039E1

version: To be filled by O.E.M.

serialNumber: C02140302D5DMT31M

assetTagNumber: MacBook-Aluminum

locationInChassis: Part Component

boardType: 0xA

Type: 3, Length: 21, Handle: 0x3

SystemEnclosure:

manufacturer: Apple Inc.

type: 3

version:

serialNumber:

assetTagNumber:

Type: 4, Length: 42, Handle: 0x4

ProcessorInformation:

socketDesignation: CPU 1

processorType: 3

processorFamily: 0x2

manufacturer: Intel

processorID: 0x1067A

processorVersion: Genuine Intel® CPU U2300 @ 1.20GHz

externalClock: 312MHz

maximumClock: 1875MHz

currentClock: 1200MHz

serialNumber: To Be Filled By O.E.M.

assetTag: To Be Filled By O.E.M.

partNumber: To Be Filled By O.E.M.

Type: 7, Length: 19, Handle: 0x5

Type: 7, Length: 19, Handle: 0x6

Type: 7, Length: 19, Handle: 0x7

Type: 8, Length: 9, Handle: 0x8

Type: 8, Length: 9, Handle: 0x9

Type: 8, Length: 9, Handle: 0xa

Type: 8, Length: 9, Handle: 0xb

Type: 8, Length: 9, Handle: 0xc

Type: 8, Length: 9, Handle: 0xd

Type: 8, Length: 9, Handle: 0xe

Type: 8, Length: 9, Handle: 0xf

Type: 8, Length: 9, Handle: 0x10

Type: 8, Length: 9, Handle: 0x11

Type: 8, Length: 9, Handle: 0x12

Type: 8, Length: 9, Handle: 0x13

Type: 8, Length: 9, Handle: 0x14

Type: 8, Length: 9, Handle: 0x15

Type: 8, Length: 9, Handle: 0x16

Type: 8, Length: 9, Handle: 0x17

Type: 8, Length: 9, Handle: 0x18

Type: 8, Length: 9, Handle: 0x19

Type: 8, Length: 9, Handle: 0x1a

Type: 8, Length: 9, Handle: 0x1b

Type: 8, Length: 9, Handle: 0x1c

Type: 8, Length: 9, Handle: 0x1d

Type: 8, Length: 9, Handle: 0x1e

Type: 8, Length: 9, Handle: 0x1f

Type: 9, Length: 17, Handle: 0x20

Type: 9, Length: 17, Handle: 0x21

Type: 13, Length: 22, Handle: 0x22

Type: 15, Length: 55, Handle: 0x23

Type: 16, Length: 15, Handle: 0x24

Type: 19, Length: 15, Handle: 0x25

Type: 17, Length: 28, Handle: 0x26

MemoryDevice:

deviceLocator: DIMM0

bankLocator: BANK0

memoryType: DDR3

memorySpeed: 1250MHz

errorHandle: ffff

manufacturer: Corsair

serialNumber: 00000000

assetTag: AssetTagNum0

partNumber: CMX4GX3M2A1333C8

Type: 20, Length: 19, Handle: 0x27

Type: 17, Length: 28, Handle: 0x28

MemoryDevice:

deviceLocator: DIMM1

bankLocator: BANK1

memoryType: DDR3

memorySpeed: 1250MHz

errorHandle: ffff

manufacturer: Corsair

serialNumber: 00000000

assetTag: AssetTagNum1

partNumber: CMX4GX3M2A1333C8

Type: 20, Length: 19, Handle: 0x29

Type: 32, Length: 20, Handle: 0x2a

Type: 41, Length: 11, Handle: 0x2b

Type: 41, Length: 11, Handle: 0x2c

Type: 131, Length: 6, Handle: 0x2c

AppleProcessorType:

ProcessorType: 0x301

Type: 127, Length: 4, Handle: 0x2d

Customizing SystemID with : 00020003-0004-0005-0006-000700080009

Converted ACPI V1 FADT to ACPI V2 FADT

FADT: Restart Fix applied (Type : PCI) !

MADT table successfully patched

* Processing RSDT:

ACPI Revision 0 successfully patched

LoadDrivers: Loading from [/Extra/Extensions.mkext]

Starting Darwin x86_64

Boot Args: boot-uuid=C8A15FB4-41BD-3305-8684-878096148A2E rd=*uuid PCIRootUID=0 npci=0x2000 darkwake=0

Setting Legacy USB Off on controller [10de:0aa6] at 00:04.1

Legacy USB Off Done

Setting Legacy USB Off on controller [10de:0aa9] at 00:06.1

Legacy USB Off Done

 

 

Share this post


Link to post
Share on other sites

Ciao a tutti,

Forse sono l'unico ad avere questo problema, ma Si blocca l'installazione di Enoch sulla pennetta USB. Da cosa può essere dovuto? Potete aiutarmi? Grazie mille

 

Share this post


Link to post
Share on other sites

Aggiornamento Enoch 2188:

- Sostanzialmente ho aggiunto alcune schede ATI previste per l'aggiornamento 10.8.3

- E ho aggiornato il modulo FileNVRAM alla versione 1.1.3

------------------

 

Ciao a tutti,

Forse sono l'unico ad avere questo problema, ma Si blocca l'installazione di Enoch sulla pennetta USB. Da cosa può essere dovuto? Potete aiutarmi? Grazie mille

 

Come è formattata la pennetta?

Share this post


Link to post
Share on other sites

È formattata Mac OS (journaled)

Ho seguito la procedura di Marchius ma al punto del l'installazione di enoch sulla pennetta si blocca.

Grazie per la pazienza Ermac

Share this post


Link to post
Share on other sites

È formattata Mac OS (journaled)

Ho seguito la procedura di Marchius ma al punto del l'installazione di enoch sulla pennetta si blocca.

Grazie per la pazienza Ermac

 

Ciao murients.

Abbi pazienza ma sono molto occupato...

 

Vediamo...

Posta il log del terminale.. (copia e incolla il contenuto del terminale)

oppure una foto della schermata dove si vede l'errore.

 

il discorso che si blocca è abbastanza generico.

 

Fabio

Share this post


Link to post
Share on other sites

Nessuno può aiutarmi?

Grazie

Buona giornata

Ciao murients.

Se avessi il tuo hardware in firma, sarebbe anche più facile aiutarti, ma così chi ti aiuta va alla cieca!

Hai per caso un laptop o scheda madre con bios UEFI....e magari con qualche partizione nascosta per il recupero del bios?....

...ti dico questo perchè anche a me si bloccava e comunque durante il boot, ma non certo durante l'istallazione con l'istaller di Enoch. Chiarisci anche questa cosa.

Hai provato l'istallazione manuale dei binari?

 

Micky

Share this post


Link to post
Share on other sites

Grazie a tutti per l'aiuto , appena arrivo a casa posto le info che mi avete richiesto. Comunque ho un notebook acer aspire 6930g.

Ma non credo sia l'hardware il problema, si pianta l'installazione di enoch su pennetta.

Non ho provato ad installare i binari, non sono capace. :-(

Grazie ancora è buona giornata

Share this post


Link to post
Share on other sites

Ciao a tutti,

di seguito quanto mi restituisce il log dell'installer:

 

 

Chameleon installer log - Wed Feb 27 22:16:47 CET 2013

Installer version: 2.2svn 2188

======================================================

/dev/disk0

#: TYPE NAME SIZE IDENTIFIER

0: FDisk_partition_scheme *298.1 Gi disk0

1: Windows_NTFS PQSERVICE 10.0 Gi disk0s1

2: Windows_NTFS 58.8 Gi disk0s2

3: Windows_NTFS DATA 166.6 Gi disk0s3

4: Apple_HFS Leopard 62.7 Gi disk0s4

/dev/disk1

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme *232.9 Gi disk1

1: EFI 200.0 Mi disk1s1

2: Apple_HFS Macintosh HD 232.6 Gi disk1s2

/dev/disk2

#: TYPE NAME SIZE IDENTIFIER

0: FDisk_partition_scheme *7.5 Gi disk2

1: Apple_HFS Mac OS X Base System 7.5 Gi disk2s1

======================================================

Backup Chameleon files

======================================================

Clearing options...

Can't locate YAML/Syck.pm in @INC (@INC contains: /Library/Perl/Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /Library/Perl/5.8.1 .) at /Volumes/Mac OS X Base System/private/tmp/scripts.ubp0/clean_bootplist.pl line 4.

BEGIN failed--compilation aborted at /Volumes/Mac OS X Base System/private/tmp/scripts.ubp0/clean_bootplist.pl line 4.

======================================================

 

Vorrei anche allegare l'immagine dell'installer, ma non so come si fa ad incollarla nel post...

 

Manca qualcosa nella pennetta? Dite che installando manualmente da binari potrei risolvere?

Come si fa? :-)

 

Grazie ancora a tutti per la pazienza

 

buona serata

Share this post


Link to post
Share on other sites

Ciao a tutti.

 

Io ho una Intel HD3000 integrata e una geForce 9500GT, vorrei fare andare due schermi (usando le due schede con i VGA o usando una sola scheda con HDMI+VGA) ma non ci riesco. Potete suggerirmi qual'è la strada migliore? Ho aperto un post

 

http://www.insanelymac.com/forum/topic/286805-video-dual-card-intel-hd3000-e-nvidia-geforce-9500gt/#entry1894512

 

e sto seguendo alcuni consigli, però vedo che qua viene esposta la soluzione con due schede attive contemporaneamente

 

Quelle chiavi le ho pensate per chi ha problemi con il GraphicsEnbaler, nel senso che se hai una scheda video integrata tipo le Intel HD4000,

e il GraphicsEnabler = Yes ti riconosce la Intel ma allo stesso tempo ti da problemi sulla Nvidia o la Ati con quella chiave gli dici praticamente di saltare il

GraphicsEnabler per la nvidia (SkipNvidiaGfx) o per la ATI (SkipAtiGfx) oppure la Intel (SkipIntelGfx),

 

Il dubbio è: meglio disabilitare la integrata o provare a farle coesistere?

Share this post


Link to post
Share on other sites

perfect

 

 

 

Enoch (r2188) [2013-02-23 19:01:41]

cpu freq classic = 0x000000006fc22350

msr(524): ia32_perf_stat 0x06000615

max: 6 current: 6

 

---------------------------------------------

CPU: Brand String: Genuine Intel® CPU U2300 @ 1.20GHz

CPU: Vendor/Family/ExtFamily: 0x756e6547/0x6/0x0

CPU: Signature: 1067a

CPU: Model/ExtModel/Stepping: 0x17/0x1/0xa

CPU: MaxCoef/CurrCoef: 0x6/0x6

CPU: MaxDiv/CurrDiv: 0x0/0x0

CPU: TSCFreq: 1874MHz

CPU: FSBFreq: 312MHz

CPU: CPUFreq: 1874MHz

CPU: Number of CPU Cores: 2

CPU: Number of CPU Threads: 2

CPU: Features: 0x0000034f

---------------------------------------------

Module 'Symbols.dylib' by 'Chameleon' Loaded.

Description: Chameleon symbols for linking

Version: 0

Compat: 0

Module 'ACPICodec.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Module 'KernelPatcher.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Module 'klibc.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Module 'Resolution.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Buffer location: 0x1000F8CA status: 0

0x00 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0x00 0x05 0xE3 0x50 0x22 0xAF 0x44 0x00 0x00

0xFF 0xFF 0xFF 0x00 0xE3 0x22 0x44 0x00 0x15 0x03 0x30 0x78 0x9D 0xA2 0x54 0x27

0xFF 0xFF 0x05 0x22 0x00 0x15 0x80 0x78 0x80 0x54 0x0E 0xBF 0xD1 0x00 0x81 0x40

0xFF 0x00 0x22 0x00 0x03 0x78 0xA2 0x27 0xBF 0xC0 0x00 0x40 0x01 0x3A 0x38 0x2C

0xFF 0xE3 0x00 0x03 0x2A 0x54 0x54 0xC0 0x81 0xC0 0x02 0x38 0x45 0x00 0x00 0x1E

0xFF 0x22 0x15 0x78 0x54 0xBF 0x00 0x40 0x01 0x38 0x00 0x1E 0x32 0x0A 0x20 0x32

0xFF 0x44 0x80 0xA2 0x54 0x00 0x81 0x3A 0x58 0x00 0x00 0x0A 0x00 0x35 0x20 0xFF

0x00 0x00 0x78 0x27 0xC0 0x40 0x3A 0x2C 0x1E 0x1E 0x20 0x32 0x20 0xFF 0x41 0xF3

getResolution: 1920x1080x32

Module 'Sata.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Module 'uClibcxx.dylib' by 'Unknown' Loaded.

Description:

Version: 0

Compat: 0

Loading Darwin 10.8

Loading kernel cache /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache

kernel_patcher.c[534]: Patching 64bit XNU Kernel 12.2.0

Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; *patched-2050.18.24~1/RELEASE_X86_64

commpage_patch.c[87]: _commpage_stuff_routine patched.

lapic_patch.c[76]: lapic_init panic removed.

bootstrap_patch.c[167]: KLDBootstrap::readBooterExtensions() call injected into KLDBootstrap::readPrelinkedExtensions(void* section_64)

Using PCI-Root-UID value: 0

LAN Controller [10de:0ab0] :: PciRoot(0x0)/Pci(0xa,0x0)

Setting up lan keys

ATI Framebuffer Addr: @0xE0000000 MMIO Addr: @0xFEAE0000 I/O Port Addr: @0x0000D000 ROM Addr: @0xFEAC0000

ATI card POSTed, reading Video BIOS from legacy space

Framebuffer set to: Bulrushes using AtiConfig=Bulrushes

Number of ports set to: 3 using AtiPorts=3

AMD Radeon HD 6450 512MB [1002:6779] (subsys [174b:e164]) (Caicos:Bulrushes) :: PciRoot(0x0)/Pci(0xc,0x0)/Pci(0x0,0x0)

CPU is Genuine Intel® CPU U2300 @ 1.20GHz, family 0x6, model 0x17

 

Type: 0, Length: 24, Handle: 0x0

BIOSInformation:

vendor: Apple Inc.

version: MBP81.88Z.0047.B24.1110141131

releaseDate: 10/14/11

 

Type: 1, Length: 27, Handle: 0x1

SystemInformation:

manufacturer: Apple Inc.

productName: Macmini5,1

version: 1.0

serialNumber: C07G3VUFDJD0

uuid: 00020003-0004-0005-0006-000700080009

wakeupReason: 0x6

skuNumber: To Be Filled By O.E.M.

family: Macmini

 

Type: 2, Length: 15, Handle: 0x2

BaseBoard:

manufacturer: Apple Inc.

product: Mac-8ED6AF5B48C039E1

version: To be filled by O.E.M.

serialNumber: C02140302D5DMT31M

assetTagNumber: MacBook-Aluminum

locationInChassis: Part Component

boardType: 0xA

 

Type: 3, Length: 21, Handle: 0x3

SystemEnclosure:

manufacturer: Apple Inc.

type: 3

version:

serialNumber:

assetTagNumber:

 

Type: 4, Length: 42, Handle: 0x4

ProcessorInformation:

socketDesignation: CPU 1

processorType: 3

processorFamily: 0x2

manufacturer: Intel

processorID: 0x1067A

processorVersion: Genuine Intel® CPU U2300 @ 1.20GHz

externalClock: 312MHz

maximumClock: 1874MHz

currentClock: 1200MHz

serialNumber: To Be Filled By O.E.M.

assetTag: To Be Filled By O.E.M.

partNumber: To Be Filled By O.E.M.

 

Type: 7, Length: 19, Handle: 0x5

Type: 7, Length: 19, Handle: 0x6

Type: 7, Length: 19, Handle: 0x7

Type: 8, Length: 9, Handle: 0x8

Type: 8, Length: 9, Handle: 0x9

Type: 8, Length: 9, Handle: 0xa

Type: 8, Length: 9, Handle: 0xb

Type: 8, Length: 9, Handle: 0xc

Type: 8, Length: 9, Handle: 0xd

Type: 8, Length: 9, Handle: 0xe

Type: 8, Length: 9, Handle: 0xf

Type: 8, Length: 9, Handle: 0x10

Type: 8, Length: 9, Handle: 0x11

Type: 8, Length: 9, Handle: 0x12

Type: 8, Length: 9, Handle: 0x13

Type: 8, Length: 9, Handle: 0x14

Type: 8, Length: 9, Handle: 0x15

Type: 8, Length: 9, Handle: 0x16

Type: 8, Length: 9, Handle: 0x17

Type: 8, Length: 9, Handle: 0x18

Type: 8, Length: 9, Handle: 0x19

Type: 8, Length: 9, Handle: 0x1a

Type: 8, Length: 9, Handle: 0x1b

Type: 8, Length: 9, Handle: 0x1c

Type: 8, Length: 9, Handle: 0x1d

Type: 8, Length: 9, Handle: 0x1e

Type: 8, Length: 9, Handle: 0x1f

Type: 9, Length: 17, Handle: 0x20

Type: 9, Length: 17, Handle: 0x21

Type: 13, Length: 22, Handle: 0x22

Type: 15, Length: 55, Handle: 0x23

Type: 16, Length: 15, Handle: 0x24

Type: 19, Length: 15, Handle: 0x25

Type: 17, Length: 28, Handle: 0x26

MemoryDevice:

deviceLocator: DIMM0

bankLocator: BANK0

memoryType: DDR3

memorySpeed: 1250MHz

errorHandle: ffff

manufacturer: Corsair

serialNumber: 00000000

assetTag: AssetTagNum0

partNumber: CMX4GX3M2A1333C8

 

Type: 20, Length: 19, Handle: 0x27

Type: 17, Length: 28, Handle: 0x28

MemoryDevice:

deviceLocator: DIMM1

bankLocator: BANK1

memoryType: DDR3

memorySpeed: 1250MHz

errorHandle: ffff

manufacturer: Corsair

serialNumber: 00000000

assetTag: AssetTagNum1

partNumber: CMX4GX3M2A1333C8

 

Type: 20, Length: 19, Handle: 0x29

Type: 32, Length: 20, Handle: 0x2a

Type: 41, Length: 11, Handle: 0x2b

Type: 41, Length: 11, Handle: 0x2c

Type: 131, Length: 6, Handle: 0x2c

AppleProcessorType:

ProcessorType: 0x301

 

Type: 127, Length: 4, Handle: 0x2d

 

Customizing SystemID with : 00020003-0004-0005-0006-000700080009

Converted ACPI V1 FADT to ACPI V2 FADT

FADT: Restart Fix applied (Type : PCI) !

MADT table successfully patched

* Processing RSDT:

ACPI Revision 0 successfully patched

LoadDrivers: Loading from [/Extra/Extensions.mkext]

Starting Darwin x86_64

Boot Args: boot-uuid=C8A15FB4-41BD-3305-8684-878096148A2E rd=*uuid PCIRootUID=0 npci=0x2000 darkwake=0 -v

Setting Legacy USB Off on controller [10de:0aa6] at 00:04.1

Legacy USB Off Done

Setting Legacy USB Off on controller [10de:0aa9] at 00:06.1

Legacy USB Off Done

 

 

Share this post


Link to post
Share on other sites

Ciao Ermac!

 

Sto cercando di installare ML e sono partico dalla tua guida, questa: http://www.insanelym...-automatizzata/

Il mio problema è che ho problemi con la 6970, come spiegato anche qui:

http://www.insanelym...761-6970-falso/

 

mi hanno suggerito questo:

 

Ciao blackwalker, molto probabilmente il tuo problema non è legato alla tua 6970, ma bensì alla marca della tua scheda video che dall'hardware in firma vedo essere HIS, te lo dico poichè la mia sapphaire x-vapor 4870 all'inizio non voleva sapere di funzionare, poi grazie ad ErmaC, ha cominciato a funzionare, questo perchè la mia scheda presentava un sub id differente dalle reference che venivano riconosciute dal sistema, per cui è stato costretto ad aggiungere nelle sorgenti di chamaleon il corretto id e sub id per la mia scheda e da lì poi ha cominciato a funzionare, naturalmente poi con il comando AtiConfig ho iniettato il corretto framebuffer per la mia scheda. Quindi prova a chiedere nel forum di enoch boot loader se ErmaC può inserire il tuo id e sub id per farti riconoscere la scheda, e poi effettuare prove con il comando AtiConfig per trovare il framebuffer corretto.

 

dovresti mettere il corretto id e sub id della mia scheda nel tuo bootloader credo.

Per cui provo a chiedere qui cosa ne pensi e se è possibile farlo.

 

questo è fino dove arrivo:

img0891cc.jpg

 

 

img0892sk.jpg

 

Queste sono le informazioni della mia 6970:

 

my6970.jpg

 

Grazie in anticipo e spero di avere una tua risposta/consiglio ^_^

Share this post


Link to post
Share on other sites

mi hanno suggerito questo:

dovresti mettere il corretto id e sub id della mia scheda nel tuo bootloader credo.

Per cui provo a chiedere qui cosa ne pensi e se è possibile farlo.

 

Ciao blackwalker...

Enoch 2188 ha dentro di base questo:

 

{ 0x6718, 0x0B001002, CHIP_FAMILY_CAYMAN, "AMD Radeon HD 6970", kGibba },

{ 0x6718, 0x20101458, CHIP_FAMILY_CAYMAN, "AMD Radeon HD 6970", kGibba },

{ 0x6718, 0x20101787, CHIP_FAMILY_CAYMAN, "AMD Radeon HD 6970", kGibba },

{ 0x6718, 0x22001458, CHIP_FAMILY_CAYMAN, "AMD Radeon HD 6970", kGibba },

{ 0x6718, 0x23061787, CHIP_FAMILY_CAYMAN, "AMD Radeon HD 6970", kGibba }, // HIS

{ 0x6718, 0x23701462, CHIP_FAMILY_CAYMAN, "AMD Radeon HD 6970", kGibba }, // MSI

{ 0x6718, 0x31301682, CHIP_FAMILY_CAYMAN, "AMD Radeon HD 6970", kGibba },

{ 0x6718, 0x67181002, CHIP_FAMILY_CAYMAN, "AMD Radeon HD 6970", kGibba },

{ 0x6718, 0xE182174B, CHIP_FAMILY_CAYMAN, "AMD Radeon HD 6970", kGibba },

{ 0x6718, 0xE203174B, CHIP_FAMILY_CAYMAN, "AMD Radeon HD 6970", kGibba },

 

 

I valori in neretto "potrebbero" corrispondere alla tua scheda...

purtroppo dalla foto che hai postato non si vede il SubDeviceID...

fai un dump con DarwinDunper e riuscirai a vedere anche il valore del SubDeviceId

Poi dovrai trovare quale FrameBuffer si adatta alle tue esigenze..

(Vi ricordo che non ho schede ATi.. e quindi rispondo "per sentito dire...")

 

Fabio

Share this post


Link to post
Share on other sites

Ciao ErmaC,

grazie della tua risposta. :)

Ora provo a trovare l'esatto SubDeviceID con DarwinDunper!

 

Ho usato la tua guida, per ricreare l'usb di installazione, con il pacchetto di installazione

comprensivo dell'ultimo aggiornamento di MountanLion 10.8.3!

 

mi chiedevo se era possibile, intanto,

aggiornare la USB con l'ultima versione, la 2188!

Share this post


Link to post
Share on other sites

mi chiedevo se era possibile, intanto,

aggiornare la USB con l'ultima versione, la 2188!

 

Se pazientate ancora qualche giorno... è in arrivo "Il vaso di Pandora" che farà molto (e oltre) il lavoro per voi...

 

Fabio

Share this post


Link to post
Share on other sites
Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By thomaspetersen
      Hi All
       
      I'm trying to start a Hackintosh High Sierra 10.13.5 installation:
      - MSI B350 PC Mate
      - Ryzen 5 - 2600
      - Radeon Pro 580 GPU
      - 4 x 8GB DDR4
      (Have a working clover bootloader for HS 10.13.3 - but for some reason, I can't use that setup with the 10.13.5) 
       
      Have tried different bootloader setup, with different outcomes...
      ATM. I get this error/hang - "Unknown CPU: family = 0x17, model = 0x8, Stepping = 0x2"
      Have search google, and can see that the threads ppl. are getting this, is when they look at "About this mac", I haven't yet installed the OSX.
       
      So can someone help...

      I'm running the newest Kexts: AppleALC, FakeSMC, Lilu, RealtekRTL8111, USBInjectAll and WhateverGreen.
      In Bootloader setup, i'm running: -v, -s, -f, -no_compat_check, busratio=34, PCIRootUID=1, npci=0x2000, dart=0 and nv_disable=1
      In SMBIOS i'm using the iMac18,2 and in RT i'm using BooterConfig: 0x28 and CsrActiveConfig: 0x67
      In installed drivers i'm using: AptioMemoryFix, EmuVariableUefi-64, OsxAptioFixDrv-64 (Have tried Fix2 as well)
       
      But i'm, keep getting the Unknown CPU hang/error, can someone help...
      Or do someone have a setup with the same CPU and GPU, that can show me his/her setup for Bootloader/Kexts...
    • By Slice
      Now I want to add vector graphics support in Clover. See rev 4560 and later.
      It is not working yet but designers may begin to create Vector Themes.
      It supposed to consist of SVG elements and has design size. It will be rendered to any screen size scaled from design size.
       
      What application in macOS can create SVG graphics?
      Inkscape is not working in macOS 10.11+. Pity.
      LibreOffice Draw works with SVG but buggy.
      Boxy SVG cost 10$ but looks good enough. It creates the best in simplicity files and have more then enough features.
      Illustrator is good but expensive.
       
      How to improve SVG file?
      Clover has restricted support for SVG. It is your job to make compatible file and as small as possible to speedup rendering.
      Some helps:
      Help:Inkscape – From invalid to valid SVG Inkscape files
      From invalid to valid SVG Adobe Illustrator files
      From invalid to valid SVG files of other editors: BKchem, ChemDraw and CorelDRAW
      Help:Illustrator – Assistance with creating and saving SVG images in Adobe Illustrator that will pass W3C validation
      User:Quibik/Cleaning up SVG files manually
      Later I will write own instructions specific to Clover abilities.
       
      How to create SVG fonts?
      You can google to find ready-to-use SVG fonts.  I found some problems with too beaty fonts: slow rendering and overflow crash. Be careful.
      You can get ttf or otf fonts and convert them into svg by using online WEB services. Not a problem to google.
      But then I want to find a way to simplify the font to reduce a size and speedup rendering.
      You can create own font by FontForge It is opensource and available for Windows, Mac and GNU+Linux. It creates otf font which you can convert to svg font.
       
      Pictures from Badruzeus
      https://www.insanelymac.com/forum/applications/core/interface/file/attachment.php?id=301597
    • By apianti
      Just so you all know I actually have done something. I have pushed the source to both my github and to sourceforge, please commit to the experimental branch and I will merge it into the stable branch once it is safe. Also, nothing meaningful happens yet so don't get too excited. Only the Visual studio build works right now. I haven't set up the Xcode or Makefile builds yet, I'm trying to do them now.
       
      https://github.com/apianti/Clover
      https://sourceforge.net/p/cloverefiboot/Clover
       
      IA32/X64/ARM/ARM64 testing ISO (6/7/2018): Clover-3.0-experimental.iso
    • By cvad
      Bootdisk Utility Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
      Special utility from cvad & russian MAC community for new hackintosh users.
       
      BDU_v2.1.2018.023b.zip
      MakeCloverBDUReadyZip.bat.zip
      Enjoy...
       
       
       
      Feel free to "Rate File"
      Submitter cvad Submitted 04/28/2013 Category Bootloaders  
      BDU_v2.1.2015.016b.zip
      BDU_v2.1.2015.018b.zip
      BDU_v2.1.2016.019b.zip
      BDU_v2.1.2016.020b.zip
      BDU_v2.1.2017.021b.zip
      BDU_v2.1.2017.022b.zip
×