Jump to content
Sign in to follow this  
Followers 0
RookieDDZ

Booting issues, 1 good 1 not

2 posts in this topic

Recommended Posts

I just rebuilt my Dell E6400 with Lion. I'm working on a dual-boot with Windows 7 and my bootloader cannot boot into Lion and I'm wondering why. The fun part is when I use my USB drive that has the Chimera 1.7.0 r1394 bootloader, Lion boots just fine from the HD partition.

 

Currently Chimera 1.7.0 r1394 is installed and displays both Win7 and Lion. When I choose Lion, I get the fancy apple logo and it hangs. Verbose says it fails at:

apple16x50uartsync2: Detected 16550AF /c /cf FIFO=16 Maxbaud=115200

 

Above that it states it bugs out about voodoobattery, but then moves on to the above.

 

Originally used ###### to just install Chimera and that didn't work right out of the box

Rebuilt the bootloader using ###### and selected UserDST, still no go. I know I'm missing something, since having my USB drive be the bootloader works just fine.

 

I'm currently working on manually editing the chameleon.boot.plist but I'm not sure where or what to remove. I thought the pros would guide me in the right direction.

 

Is there a way to look at the USB bootloaders file and copy that? Where and how can I view it?

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By jdorz
      Hello all,

      I have successfully gotten my Hackintosh working 99 percent. The remaining issue that I am running into is that my system will randomly kernel panic upon a user issued shutdown or reboot WHEN I have either a usb sound card or usb headset plugged into any of my USB ports (both 2.0 and 3.0). If I remove the headset, it will power down with no issues. Does anyone have any suggestions?

      My system is as follows:
      MacOS 10.14 Mojave
      Gigabyte H370 HD3
      8400 i5 Coffee Lake
      Radeon RX 580 sound card

      I have the internal audio disabled. I have also attached my config.plist file.

      I have the following Kexts installed:

      FakePCIID_XHCIMux.kext
      USBInjectAll.kext
      FakeSMC.kext
      WhateverGreen.kext
      IntelMausiEthernet.kext
      XHCI-300-series-injector.kext

      Lilu.kext


      Thank you.
      config.plist
    • By unixb0y
      Bluetooth + AirDrop + Apple Watch "Auto Unlock" + Continuity / Handoff
      BCM20702 / TP-Link T9E (AC1900)
       
      I have a little update on getting BCM20702 running in Mojave:
       
      Without kext files, nothing worked "OOB" with my USB dongle. So I got "BrcmFirmwareStore" and "BrcmPatchRAM2" from RehabMan.
      I tried putting the kext files in /L/E , didn't work so I tried /S/L/E. * While that didn't work at first, I then tried to refresh the kext cache; the files didn't show up in kextstat.
      I used this command:
      sudo kextcache -invalidate / which told me 2 error messages: BrcmFirmwareStore and BrcmPatchRAM2 had the wrong permissions. This is fixed like so:
      sudo chown -R 0:0 /System/Library/Extensions/BrcmPatchRAM2.kext/ sudo chmod -R 755 /System/Library/Extensions/BrcmPatchRAM2.kext/ sudo chown -R 0:0 /System/Library/Extensions/BrcmFirmwareRepo.kext/ sudo chmod -R 755 /System/Library/Extensions/BrcmFirmwareRepo.kext/ Reboot and be happy! 
      Both the actual Bluetooth entry in System Preferences, that was missing before as well as an entry in System Report > Bluetooth finally appeared!
      I have a TP-Link Archer T9E WiFi card and now in conjunction, AirDrop does work like a charm! 
      Cheers, Dave 
       
      * EDIT:
      RehabMan replied to me on GitHub and it's not recommended to use /S/L/E and you should let that folder remain reserved for Apple original kext files. So I tried putting the files (with the correct permissions) back into /Library/Extensions and Bluetooth and AirDrop both still work fine!
      So I would recommend to put the files either into EFI/EFI/CLOVER/kexts/Other or - like me - into /Library/Extensions and after (or before) copying the two kext files, set the permissions like shown above for both files with chown and chmod.
       
      EDIT2: 
      I totally forgot to mention that even unlock via Apple Watch works! I assumed it would not work, until the "iMac" itself saw my Watch and kindly asked if I wanted to activate it  I immediately turned the feature on and it's working like a charm!
      What also perfectly works is Handoff. It's a feature that I never found really useful, especially between iOS and Mac, however when I have a Safari window open on my iPhone, the Hackintosh shows me the handoff Safari icon in the App switcher as well as in the dock (only tested Safari for now) and it behaves just like on my MacBook Pro!
      Universal Clipboard is also working as well as SMS / MMS.
      I couldn't test "Cellular Calls" and the "Continuity Camera" as I don't have a second phone and it's quite late here right now for calling someone on the telephone and I don't have any iOS 12 devices either. The "Instant Hotspot" did not work, but I think that anybody going the TP-Link T9E + BCM20702 way is building a PC that is permanently attached to WLAN or even LAN (Ethernet), so that's not an issue. I think laptop Hackintoshers should just use a MacBook WiFi card as they probably already have the connector etc. etc. (no adapter or Motherboard-dependent solutions needed).
    • By ITzTravelInTime
      Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
       
      The name means: TINU Is Not #####, the U refers to a popular software that is used to create Mac OS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
       
      This app basically is a graphical interface for the createinstallmedia executable that is inside the Mac OS installer apps, it is capable to create a Mac OS installer on a drive completely vanilla like what you do using the command line method, and also this method is recommended by apple itself. In addition to this, this app provvides also to you some customization features and a better management of the hall macOS isntall media creation process
       
      Allows you to create easily a macOS install media without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install clover on the usb drive once TINU has finished or leave it as is you want to use it on a Mac.
       
      Features:
        - Simple to use UI that allows you to easily start the macOS install media creation process
        - It can work with every Mac OS installer app that has the createinstallmedia executable inside of it's resources folder (including also beta and newly released installers)
        - You can use any drive or partition you want that can be erased and is at least 7 GB of size
        - Works on Mac OS recovery, so you can create a macOS install media from a bootable macOS installer or from the macOs recovery, and you can use TINU to install macOS too.
        - All vanilla, the macOS install medias created with this tool are 100% vanilla, just like you created them using the command line "createinstallmedia" method in the terminal, with also some extra optiona features
        - Open source, you will know what this program does on your computer and also you can create your own version by downloading and playing with the source code
        - Does not requires to do anything of special first, just open the program
        - No need to go in disk utility first, TINU can format your drive for you
        - Uses recent and more modern APIs and SDKs and Swift 3 language
        - Transparent graphics style available (use alt + s on the keyboard or View->Use transparent style)
        - Works using the latest versions of macOS and will also support newer Mac installers out of the box without needing for an update
        - Advanced section, to customize your macOS install media
        - Installer customization: Kernelcache/prelinkedknerel and boot files replacement (a feature that can be handy while dealing with old Macs or with beta installers when you need to mod or change the boot files some times)
        - Clover EFI folder installer
       
        Features that are planned for some future versions:
        - Integrated EFI partition mounter tool (TINU can already mount EFI partitions from version 2.0, but a dedicated section which allows to mount every EFI partition in the system will be added)
        - Install clover and configure clover
        - Install kexts inside the kexts folder of clover
        - Clover drivers customization
        - Use custom dsdt in clover
        - integrated pre-made clover config templates database from a remote and open repository
        - Support for other languages, at least Italian   Rquirements:  - A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer)  - A drive or a free partition of at least 7 GB that you want to turn into a macOS/Mac OS X installer  - A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage device in your machine (excepted the drive or volume you want to turn into your macOS install media)   Note that this app is under the GNU GPL v3 license so any reuse of the source code must follow the license's terms   Latest stable TINU release:   Download the app:                                https://github.com/ITzTravelInTime/TINU/releases   View the source code:                            https://github.com/ITzTravelInTime/TINU/       Frequently asked questions about TINU:  https://github.com/ITzTravelInTime/TINU/wiki/FAQs     NOTE: if you have problems with your USB installer of 10.13.4 or newer version not being detected by clover you have to use the latest clover and if it still does not detectets your usb installer you have to remove the invivible file called .IAPhysicalMedia located into the root of the usb installer. This issue is caused by a changement in the apple's createinstallmedia, don't blame TINU for that, TINU does only uses the installer creation method from apple, which has been changed by appleitself, causing this problem for hackintosh users some times, this issue should be resolved in the latest versions of clover which will no longer require that you do changements to let your usb dive to be detected, a setting to do this fix automatically in tinu is also present TINU in the adavnced settings, starting from the version 2.0 of the app. I leave also some screenshots as well
       
       
       
       
       
       
       
       

    • By Renegade
      Hi guys,
       
      My  current build is working flawlessly under High Sierra except for one thing : my Roccat Kone EMP mouse won't work after waking up from sleep. I have to disconnect/reconnect it to get it to work again.
      Other mice (less sophisticated) do work upon wake.
      However , the Roccat mouse doesn't have any issue under Windows 10 or on an iMac running SL 10.6.3 . I wish I could try under Sierra ...
       
      Thanks in advance to anyone willing to help
       
      Here are my build details and a backup from the ioreg:
      Mobo: ASRock Z370 ExtremePro4 - CPU: i7-8700k - RAM: 16GB G.SKILL DDR4 - GPU: NVidia GTX1080 - SSD: Crucial M4 512GB
       
      Kexts used:
      AppleALC.kext
      CodecCommander.kext
      FakeSMC_ACPISensors.kext
      FakeSMC_CPUSensors.kext
      FakeSMC_GPUSensors.kext
      FakeSMC_LPCSensors.kext
      FakeSMC.kext
      IntelMausiEthernet.kext
      Lilu.kext
      USBInjectAll.kext
      XHCI-200-series-injector.kext
       
      i7-8700k OSX.ioreg.zip
    • By Ganesh1990
      Hi,
       
      Can Anyone suggest how to disable USB mass Storage in High Sierra, iam currently running 10.12.6 version, 
      I have Tried the Following steps which came across search in google, 
      I Have deleted,
      IOUSBMassStorageClass.kext
      IOUSBMassStorageDriver.kext
      from /System/Library/Extensions folder and tried 
      sudo touch /System/Library/Extensions
      But still My USB Pendrive is detecting.
      Can anyone please help me...
×