Salve, vorrei fare un Hackintosh come da titolo, solo che avendo poco budget volevo chiedere se la mia attuale postazione fosse buona e ci fossero componenti compatibili per mac:
amd r9 280x
ram 2x4 1600
Se non erro però la gru non dovrebbe esserlo dato che è amd. Grazie in anticipo
can somebody walkthrough with the mojave installation guide?
i have a mac high sierra 13.6 version on my macbook pro and want to install mojave on my desktop
Exact config is Gigabyte gaming wifi 7 motherboard amy ryzen 7 2nd gen 2700X processor Gigabyte G1 8GB grapgic card VEGA 64
running 2 nvme Samsung 256gb cards and 1 intel 180gb ssd internal and 1tb WD HDD, with 64 GB 3200Mhz Ram
Budget Workstation MacOS 10.14.1 build: z370 AORUS Gaming 5 - i5-8600K - RX 580 - UHD 630
flawless iGPU/dGPU integration, fast FCPX editing/rendering, great overall performance for ~$1200 / ~£1000
Update: updated WhateverGreen and Lilu, then updated OS to 10.14.3 and everything is fine! Even iMessage, which previously I hadn't been able to make work, is now working - possibly the update flushed the NVRAM?
I'm gonna come straight out and admit it - I used newb tools which are considered taboo on InsanelyMac, and so this isn't so much an installation guide as it is a green flag to anyone considering the same hardware. My first and previous Hackintosh project was just over ten years ago and this site was massively helpful, so this is my (very small) way of giving back.
CPU: Intel i5-8600K 3.6GHz hexacore (contains UHD 630 iGPU)
CPU Cooler: be quiet! Pure Rock Slim (no paste needed, and fan facing front)
Mobo: GIGABYTE z370 AORUS Gaming 5 (WIFI)
RAM: 1x 8GB CORSAIR Vengeance LPX C16 2666MHz (in first slot)
GFX Card: Sapphire RX 580 NITRO+ SE
SATA: used ports 0, 1, 3, 5 (HDD problems when connected to port 4)
DVD Drive: generic
PSU: EVGA 500W Semi Modular (but you should get 650W!)
Case: CoolerMaster CM590 III
Fans: 2x stock case fans (one sucky on front, one blowy on back), 3x be quiet! BL046 120mm fans (two blowy on top, one sucky on front). Airflow near-perfectly balanced.
With the Clover configuration, you want to pay close attention to all things relating to graphics. There are some specific settings for ACPI, Boot, Devices and Graphics which should be copied exactly in order to get the iGPU and dGPU to work in perfect harmony. For instance, make sure you use ig-platform-id 59120003 rather than 59120000 if you want FCPX to be usable. With the right settings, FCPX will not only run, but run flawlessly.
I was not able to figure out how to make NVRAM/PRAM behave itself, and I got errors when I tried to issue relevant commands. As a result, I could not at first get iMessage to work properly. It worked once on my first installation attempt but not from subsequent attempts. This Clover configuration therefore has no consideration whatsoever toward iMessage reliability - however, iMessage ended up working somehow, anyway - I noticed it after I'd updated to 10.14.3 but this may just have been coincidence.
Onboard WiFi does not work. There is no driver for it. I'm using wired ethernet to a bridge router as it was cheaper than getting a compatible PCI card.
Audio is working well after I installed the z370 audio patch, then the ALC1220 codecs, then AppleALC.
With kexts for generic 3rd party SATA and generic 3rd party eSATA, my HDDs and DVD drive work perfectly well.
Sleep/Wake functions run perfectly. iCloud functions run perfectly. Shutdown leaves the mobo LEDs on, annoyingly.
My USB 3 ports seem to suffer from low power output, and I don't know why.
Overall, this system appears to run about as well under MacOS 10.14 Mojave as it does under Windows 7. I would solidly recommend this build to anyone looking to build a computer for workstation purposes, on a budget.
alla fine sono riuscito a risolvere il problema che riscontravo qualche mese fa, dopo l'ottima EFI sistemata da @gengik84 e l'ho risolto rimuovendo dart=0 che creava kernel panic e problemi quando la batteria scendeva sotto ad un livello di batteria basso. Adesso il sistema non crea più problemi di kernel panic, ma volevo chiedervi se allo stato attuale secondo voi c'è qualcos'altro da ottimizzare.
So after a gazillion tries with High Sierra, i gave up and decided to try Mojave. I had nothing to lose, afterall.
I started from scratch. I reformatted my thumb drive. Made it bootable from the Mojave [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Booted with it. Selected my language. It installed a little bit. Rebooted. I Booted from the SSD. Installed a bit more. Rebooted. I Booted from the SSD again and it finished the installation.
I went through the basic setup and got to the desktop. I ran [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and selected my options and "built" it.
Thinking i was a-ok, i decided to reboot, just to make sure all was well.
After about 1min, i lose display.
I thought i had messed something up in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], so i decided to go back to my mac mini, redo the thumb drive all over again.
I go to boot from the thumb drive and when i get to the language selection screen, i lose all USB usage, so i cant even get in to wipe the SSD and start over. So, Mojave is still on the SSD, but i cant get to it because i lose display.
Im attaching a screenshot of Verbose mode right before i lose display.
I would greatly appreciate any help to get back into it or at least help getting it re-installed!!