Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771     --Create a bootable copy of macOS Sierra   http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra   http://diskmakerx.com/   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder    CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder   CLOVER.zip   --Nvidia WebDriver Sierra   http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/   --Nvidia WebDriver High Sierra   http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/   --Cuda   http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   Now you need a fine tune!   --DSDT DSDT.GA H97M-D3H MaLd0n.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF --Power Management   Use "plugin-type"=1 in DSDT, SSDT or Clover config.plist   --Brightness   Install .app, select the required permission and reboot. Work in F1 / F2 keys! NativeDisplayBrightness.app.zip https://github.com/Bensge/NativeDisplayBrightness/releases *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install  
      --FakeSMC
        https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/   --Audio   https://github.com/vit9696/AppleALC   --USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   --LAN   http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Run it, post files generated in your desktop RunMe.app  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with patches for Skylake DSDT.MaLd0n ASUS Z170M PLUS.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DMAC -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -IMEI -PNLF -HDMI --FakeSMC
      http://www.hwsensors.com/releases   --Audio https://github.com/vit9696/AppleALC   --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   --LAN https://github.com/Mieze/IntelMausiEthernet   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!
    • By tlefko
      macOS-Mojave-XPS13-9350
      Hello, this is a simple guide to get OS X 10.14 working on any XPS 13 9350 model
      This guide uses files from (@syscl) (albeit edited) and full credit to him for the Deploy.sh and DSDT patches. However, his Clover folder is unbootable with Mojave and thus has been redone.
      However, his Deploy is still retained but edited to remove some DSDT patches that break things on Mojave
      I did my best to keep the guide simple and for the most part it is, it's inteded for the 6200U non iris but should work with others. (credit @syscl)
      Issues
      Wake up via lid is hit or miss (sometimes needs key press) SD Card slot Restarts don't work (endless black screen while turning off but still on) Usage Notes
      USB Devices eject upon sleep (USB Patches via Deploy were major issue) Changing board number via Clover Config doesn't work always unless serial is changed (No idea..) Audio is controlled via VoodooHDA however prefpane is not nessacary. Never tested USB C anything. Charging should be fine however I'm not sure about others, don't personally use it) What Works
      Everything else! Setup Notes
      The new AFPS file system must be used, there is no way to avoid it. Has no noticeable adverse effects except slower boot time It is difficult to repartition AFPS drives and resize them, recommend clean install or you could have one partition smaller than your hard drive that can't be increased unless reformatted Although Volumes will be converted, keep drive as GUID BIOS Settings
      Set all SATA operation as AHCI Disable Secure Boot, Fast Boot For Coil Whine improvement disable C-States Enable UEFI Booting (Disable Legacy if easily confused) Recommended: Clean Install (Preinstall steps)
      Download latest Mojave version from Mac App store (Register AppleID as developer, enroll your mac, download the preview from the link onsite or google for detailed instructions. Make Bootable media (google how or download app to do it, it's just a terminal command) Download the Latest Clover revision (currently using r4568) and install it to your USB as UEFI and ESP (no need for drivers) Copy The contents of this Github repository into your EFI folder on the USB (Mount the EFI Partition via clover config, efi mounter, etc.) (No Boot Folder in EFI) If you have the same XPS Model as me you can use stock ACPI patched files (6200u, hd 520, 3200x1800,) if not delete contents of both folders (origin, patched) and will fix later via @syscls modified deploy) Installing Mojave (Clean Install)
      Boot PC off the USB, select your Installer as your Boot drive from clover menu config is currently set to FAKESERIAL and -v. I believe (@syscl's) deploy generates serial # information Once installer is loaded, go to disk utility and format as a GUID Partition Table with whatever partitions you want (Don't format whole drive to afps make sure it's GUID) Run the Mojave installer to the drive wait for it to finish, then turn off) From Clover, select the name of the Mojave Partition (not preboot, recovery, etc.) and not your USB stick either From here the installation will continue. DO NOT CLICK ON MOUSE OR KEYBOARD (crashes installer shortly after at least for me) Post Install (Clean Install)
      Reboot off your USB once again, load up your Mojave drive. First Boot will take long, if your using my ACPI files (from @sysl's deploy, edited) and have same model you should have everything out of box (except wifi) Regardless, run through the installer and set it all up. (without acpi) At this point screen should be fine, mouse, keyboard, no wifi should be present or bluetooth. No brightness control as well. go to terminal to mount EFI or via clover Config, EFI Mounter, etc, of both USB and the internal disk Copy and REPLACE the EFI folder from the USB into your hard drive. Unplug your USB and reboot and you should be able to boot without the USB now Turn off PC, boot into clover. Don't select a drive and press F4 and Fn+F4 a few times, wait a few seconds, then boot back to the drive Plug back in the USB, mount it's EFI, and run the modified Deploy Script on your Hard Drive EFI partition After deploy is finished, there will be VoodooI2C error as I deleted it from Kexts, for me it breaks Trackpad and Keyboard. For now will be using VoodooPS2. After Modded Deploy
      You should have no Internet at this point, the following next steps should resolve that. However, your Brightness, lidsleep, USB, bluetooth should be working Using your favourite Kext Installer (Put it on a USB or something to get it on the PC), install (credit @Rehabman's) FAKEPCIID and FAKEPCIID_Broadcomm texts that are included in the ManualKexts Folder Then run "Sudo kextcache -i /" from terminal, reboot, then run it again. By this point your wifi should be fixed, and everything should be done Post Install Notes
      Your welcome to transfer whatever other kexts you want to S/L/E, personally I leave them in the CLOVER Folder injected. Doing upgrade via mac app store is similar, just partitioning hard drive is harder. Apart from that same process essentially, not recommended Credits
      Credit Hackintosher.com for basic patches (although @syscl) covered some Credit to @syscl (clearly...) Credit to @Rehabman Credit to @syscl Kexts, and his contributers. ex. Lidwake.kext (although not fully compatible) Support
      Your welcome to open any issues on this thread, I personally have little DSDT knowledge so I will do my best to help! Thanks for Reading!
      - This is a clone from my GitHub, the link to the repository is below with all files
       
      https://github.com/tlefko/macOS-Mojave-XPS13-9350
       
      - I would really like to hear everyone's experience trying this guide so please let me know in the comments how it worked for you, if you plan to try it, etc.
    • By Gymnae
      Introduction
      The H370 chipset powers 8th generation Intel Core-i CPUs. Even though the name H370 rings comparable to Z370, the H370 is based on newer silicon. This it also requires some new approaches compared to the Z370. An example would be on-die USB 3.1 and WiFi support.
       
      Since this guide is not a "hold-your-hand-every-step" guide, I assume you know:
      Clover installation and configuration How to create an install medium for MacOS Access and configure the BIOS Have heard of ACPI patching (I'm a newb at this myself)  
      What works
      Sleep (via DSDT edits and emulated NVRAM) On-board Audio (via CloverALC script) Native power management (without any kext or patch) All USB ports (and only those present are active) iGPU for both acceleration and display dGPU (I'm running an Nvidia GTX 1080)  
      Untested
      NIC --> I'm using WiFi only  
      What doesn't work
      Native NVRAM via AptioMemoryFix.efi DMVT Pre-alloc higher than 64MB (but not necessary)  
      Changes to the guide:
      22.5.18: Added SSDT hot-patching to enable sleep, replacing DSDT static patching as an alternative.
      23.5.18: Add iMac18,1 as alternative SMBIOS config for those relying on the iGPU for output
      25.6.18: Added update info
      28.8.18: Smalle changes for clarity, changed info for afps loading & updated USB patch for 13.6
       
      1. Installation
      This guide heavy inspired by the work of /u/corpnewt of /r/hackintosh and his (sorta) Vanilla guide
       
      1.1 Create the install media for MacOS
      Follow this, if you are using a Mac to start off with. If you are totally new to MacOS, then please check the basic guide Creation of an installer media in windows or linux
       
      1.2 Install Clover on the install media
      Using the Clover installer, ensure you are installing to the USB medium you are using for the installer.
      Chose the following options, leaving the others on default: 
       
      UEFI driver: AptioMemoryFix UEFI driver: ApfsDriverLoader UEFI booting only Install to ESP  
      You have to get your hands on an apfs.efi. A google search can help, or extracting it from the Installer package. Make sure you procure a version matching the MacOS version you are about to install. Place the apfs.efi in drivers64UEFI.
       
      1.2 Adjust the config.plist for the installer
      You can use the config.plist attached as a guideline, but take a look at it before and at least adjust the SMBIOS - otherwise it won't boot.
      Attention: The attached plist contains audio patches introduced by a post-install step. If you run into problems, you might remove those. It also contains a manual slide value, which should normally not be needed, but works fine for me. It is also tuned for usage with an Nvidia Pascal dGPU as main GPU.
       
      The config you create now should serve you nicely for install and running the system.
       
      Take care of adding the following basics:
      SMBIOS: iMac18,3 - You can generate a serial number via Clover Configurator. The creation of a proper SMBIOS is covered in many guides to good extend Note: If you aim at using the iGPU for output, a user reported that iMac18,1 works better - since iMac18,3 produces sever flicker. Look at the graphics section and adjust the injection for Intel to your situation  
      Fixes

      Patches

      Devices

      Graphics
      Important:
      Change 0x59120003 to 0x59120000 if you don't use a dGPU as your main display Driver and instead use the iGPU for output.
      Also note. SMBIOS iMac18,1 has been reported to work better in this configuration. But 18,3 works fine for me.

      Kernel and Kext patches
       
      1.3 kexts and friends
      Add the supplied SSDT-UAIC.aml to "patched" - it limits the injected USB Ports to the actual number and ports valid for this board.
       
      Required kexts on "Other":
      FakeSMC.kext IntelGraphicsFixup.kext Lilu.kext When having an Nvidia card: NvidiaGraphicsFixup.kext IntelMausiEthernet.kext in case you're running Ethernet USBInjectAll.kext with the HCI-300-series-injector.kext --> These two should be installed to /L/E after install  
      We are leaving sound out at the moment, this is something for post-install. Please note the absence of Shiki, I don't find it necessary. Video material I tried made use of the iGPU without shiki.
       
      1.4 Check BIOS and install
      You should be ready for install. But before you reboot, please take a look at your BIOS and set it up accordingly (copied from the aforementioned guide and adapted):
      Load Optimized Defaults Disable VT-d setting If your system has Secure Boot Mode, disable it Set OS Type to Windows 8/10 or OtherOS - I have not seen a difference Turn off internal Serial and Parallel port Turn off Network stack for boot Turn off wake-on-lan (for now) Set XHCI Handoff to Enabled Don't enable decode over 4G Depending on your GPU, set priority for boot Set internal GPU to enable Set DMVT pre-alloc to 64MB Set USB legacy to enabled Activate XMP profile 1 f your Ram has it (mine doesn't and I added the timings manually) Set ERP to enable, disable platform power management (I need to do more research if this could be enabled)  
      I've attached my current BIOS config "hack2". You can place that on a fat32 drive (the EFI partition of your install USB drive might be an idea) and see if it loads. It's made for and with the F2 BIOS.
       
      The install itself should be like other MacOS Hackintosh installs with it several reboots and ensuring to select the correct boot device in Clover.
       
      2. Post-install
       
      2.1 Install clover on target
      This is a no-brainer, but install a fresh copy of Clover on your target medium.
       
      During install select again AptioMemoryFix but also additionally
      EmuVariableUefi-64.efi Install RC scripts on target volume because otherwise NVRAM doesn't seem to work
       
      After the install, copy
      config.plist contents of "Other" content of "patched" apfs.efi from drivers64UEFI to your new clover install.
       
      2.1 Edit ACPI for slumber
      Choose one option, not both. The hot-patch is experimental, but for the moment it is stable.
       
      2.1.1 Edit DSDT
      This is necessary only once on initial install and every time, you edit or upgrade the BIOS. The DSDT.aml attached to this post might work for your system or give you a file to compare to. Don't expect it to work for you, though.
      I won't go into the details of DSDT extraction and patching. There are better guides (the linked guide is a rip-off of rehabman's guide from a different forum). Please follow such a guide to extract your ACPI data.
       
      Locate and disassemble the DSDT with the newest iasl binary you can put your hands on, then open it with MacIASL in its newest version you can find (Hint: Here is a good source) You can check if the version is new enough if MacIASL doesn't throw error upon compiling a freshly extracted DSDT.aml or DSDT.dst
       
      Add rehabmans repo (as per linked guide) and apply the following patches:
      Rename _DSM to _XDSM Fix _WAK Arg0 v2 USB3 _PRW 0x6D Skylake (instant wake) Find the CNVW device and remove the _PWR function there.
       
      Compile the DSDT and place it in "patched".
       
      2.1.2 Use SSDT hot-patching
      Instead of having to re-extract and re-patch the DSDT on every BIOS change or update, Hardware change one can also use ACPI hot-patching.
      It's a combination of config.plist patches and an SSDT, which is hot-patched into the ACPI (if I understand the process correctly)
       
      You need to add this SSDT-GPRW.aml to your Clover folder in the designated position at Clover/ACPI/patched You need to add this patch to your config.plist. It goes into the DSDT patch section  
      Note: This works for me, but the patch removes the _PRW method from all devices in the DSDT. This could have side-effects. So far, I have seen none. At the moment I'm also not applying any other patch, compared with the additional edits I made to the DSDT method before.
       
      2.2 Install kexts to system
      As mentioned in the install section, it's better to follow rehabman's instruction and install USBinjectAll.kext to /L/E:
      sudo cp -R Release/USBInjectAll.kext /Library/Extensions sudo touch /System/Library/Extensions && sudo kextcache -u / 2.3 Enable onboard Audio
      This is where I'm not so happy currently, I'd like it to work without altering AppleHDA. But currently I find no other way.
       
      2.3.1 Install FakePCIID & FakePCIID_Intel_HDMI_Audio
      Rehabman tells us to use a kext installer to install it to /S/L/E. Chose the RELEASE folder
       
      2.3.2 Run CloverALC command
      Ensure your EFI partition is mounted before running this command
      Get the newest version of CloverALC command (audio_cloverALC-xxx.sh) and run it. Our Audio codec is RTL887 and I'm running with layout ID 1
       
      2.4 Optional steps
      If you have a dGPU, now it's the time to install its drivers and adjust the config.plist for it.
      This is out of scope of this guide. Yet, my supplied config.plist is ready to be used with Nvidia Pascal cards and using the Nvidia web driver.
       
      3. Updating
      Updating inside 10.3.x point updates doesn't require much attention:
      Download the update from the AppStore as any Mac would do Allow the system to reboot Before booting MacOS with Clover, make sure to disable extra drivers for dGPUs which require non-native support. If using an Nvidia dGPU: Remove "nvda_drv=1"  from your boot arguments and disable Nvidia injection If using a non natively supported AMD card, do the same for AMD (I'm not using AMD, thus I cannot be specific) Boot into the newly created Install MacOS partition Repeat this process until the Install partition is gone Boot MacOS again, still following 3., and potentially install updated drivers Your Audio might require re-patching  
      4. ToDo
      Move away from static DSDT patching to SSDT hotpatching --> requires my work Native NVRAM --> requires developer work Audio without AppleHDA patching --> requires developer work  
      5. Thanks to
      @MaLd0nfor helping finding the right way with the DSDT
      @RehabMan, for being a legend and helping me out patching
      @toleda, for audio patches for the 300 series
      /u/corpnewt, for his superb vanilla guide
      @wmchris for his super XPS 9550 guide and introducing me to hot-patching
      all the developers of clover and it's awesomeness
       
      SSDT-UIAC.aml
      config.plist
      DSDT.aml
      hack2
    • By yehia2amer
      Dell Precision T7610 Workstation
      Hackintosh GUIDE (Work in Progress)
       
                        
      Introduction: 
      Hi Everyone,
      This Workstation used to be a Beast with Dual CPUs and tons of RAM, I Know it is now normal to get that much cores in a Desktop but it is still a very decent machine for me (As a Programmer), and I thought it would be a good idea to Install MacOS as the Daily Driver Rather than Linux and It turns out to be a very Great Experience (with Some Challenges ).
       
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors RAM: 128 GB 1333 MHz DDR3 ECC Memory GPU: ATI Radeon HD 4870 Chipset: Intel C602 Audio: Realtek ALC269Q High Definition Audio SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      Working:
      Both "Xeon E5-2680 v2" and all cores with Power Management and P-States (using VoodooTSCSync & ssdtPRGen.sh) ATI Radeon HD 4870 (Vanilla) Realtek ALC269Q (using VoodooHDA till Now) LSI 2308 SAS (using AstekFusion2) Intel 82579 Network Controller (Vanilla) Intel I210 Network Controller (IntelMausiEthernet) USB 2.0  
      Not Working:
      NEC USB3.0 xHCI Controller (Renesas Electronics uPD720201 & uPD720202) Sleep  
      https://github.com/yehia2amer/Dell-Precision-T7610-Workstation-Hackintosh-Guide
×