Jump to content
InsanelyMac Forum
ErmaC

[GUIDA] USB - Mountain Lion automatizzata

Recommended Posts

ho installato MLion 10.8.2 da snow ed ho perso le porte usb3 con relative periferiche .....qualche soluzione????? ciao a tutti

Share this post


Link to post
Share on other sites
Advertisement

Carmen come sopra il file contiene anche l'AppleHDA patchato per il tuo AD2000B

 

Per chi ha l'ALC1200 (P6T SE) e se la sente di provare ho fatto un AppleHDA.kext ibrido della 10.8.3 che contiene sia l'AD2000B che l'ALC1200

purtroppo non ho la possibilità di provare se funziona sull'ALC1200 (FUNZIONA sull'AD2000B)

AD2000B layout-id 99 (0x63, 0x00, 0x00, 0x00)

ALC1200 layout-id 12 (0x0C, 0x00, 0x00, 0x00)

 

AppleHDA (AD2000B + ALC1200)

 

Fabio

 

Non posso scaricarlo :(

Share this post


Link to post
Share on other sites

aggiornato alla 10.8.3 tutto funziona avvio ottimo, ma molto lento con drive SSD. non anyonw sa come risolvere il problema?

 

 

Edit: ho sostituito AppleACPIPlatform a quello vecchio e risolvere i problemi!

Share this post


Link to post
Share on other sites

aggiornato alla 10.8.3 tutto funziona avvio ottimo, ma molto lento con drive SSD. non anyonw sa come risolvere il problema?

Edit: ho sostituito AppleACPIPlatform a quello vecchio e risolvere i problemi!

 

Ciao papi1106

Ci aiuteresti ad aiutarti se metteresti l'hardware in firma.Grazie

 

Fabio

Share this post


Link to post
Share on other sites

visto che ho cambiato la scheda grafica :wink2: e questa guida automatizzata gestiva anche la mia scheda sabertooth,

provo di nuovo con questa tua guida o provo con "Pandora"?

grazie!!

Share this post


Link to post
Share on other sites

Salve...ho provato tutti i kext possibili (oleg o manor e fbRotate) ma al boot ho sempre schermata grigia senza cursore (non bianca) con HD 6950 2GB...forse sta nel DSDT il problema, ma non so come editarlo per i miei scopi...

nn so più che fare :wallbash:

Sarà da Agosto che provo...mi potete dare una mano?

se serve il mio ioreg (sistema pulito) è: http://rghost.net/45297822

grazie!

Share this post


Link to post
Share on other sites

Salve a tutti , a me da questo errore dopo che ho inserito il .dmg e la destinazione(Penna USB 8GB) :

 

 

Monto l'immagine di OS X Mountain Lion...

hdiutil: attach failed - non riconosciuto

logout

 

[Processo completato]

Share this post


Link to post
Share on other sites

richiudi tutto

vai su diskutility, seleziona la usb, vai su partiziona,1partizione e applica

seleziona partizione usb a sx metti il nome usb istall e inizializza osx jurnaled esteso

e rifai la procedura

 

Prova

Share this post


Link to post
Share on other sites

Stesso errore :wallbash:

Ho provato anche con un hard disk esterno a rifare la procedura per verificare se fosse danneggiata la pen drive , ma viene lo stesso errore.

Share this post


Link to post
Share on other sites

Vuol dire che hai l'immagine già montata su l desktop (Mac OSx Install ESD oppure Mac OSx Base System), smontala e rilancia lo script!

 

Micky

Share this post


Link to post
Share on other sites

Buogiorno a tutti non riesco a far partire l'installazione nè di lion nè di mountain lion con una scheda madre ASUS sabertooth x58 con lionize mi si blocca sempre a sul logo della mela cosa posso fare?Provando pero con iatkos l2 mi funziona ma non vede la scheda video asus hd 5450 qualcuno puo aiutarmi?

Share this post


Link to post
Share on other sites

ahhhh non avevo capito allora.. e dove lo prendo? sempre nella prima pagina?

Scusa ma quando uso mlionize dopo aver fatto lo script mi chiede che scheda madre ho.. il kext non viene installato automaticamente?

Share this post


Link to post
Share on other sites

"ciao senti mi aiuteresti perche non riesco neppure a far partire l'installazione su questa scheda madre da usb ..ho creato l 'installazione sulla penna seguente le voci.. scelgo sabertooth x58, macpro3,1(in base a cosa si fa sta scelta?), ma quando vado ad avviare l'installazione mi si blocca sul logo e non va piu avanti cosa posso fare?"

 

Ciao, kikko ..... queste discussioni si fanno sul forum.....

Anche perché c'è da imparare e ti conviene affrontarlo nel modo corretto...

La mia esperienza con le sabertoot x58 mi porta a pensare che il freeze così alla melina potrebbe essere la scheda video... Ammesso che la creazione della pennetta di MountainLionize sia corretta il bios settato correttamente etc. etc.

 

Vedi comunque che il supporto lo hai trovato..... e sei nelle mani dei migliori ;-)

Maurizio

Share this post


Link to post
Share on other sites

ragazzi alla fine ho risolto... era la pendrive. mah cosa stranissima ho installato iatkos con la pendrive... cmq ho usato un hd esterno e parte l'installazione ..vediamo dove arriva :D

Share this post


Link to post
Share on other sites

ho un problema l'audio dopo due o 3 riavvii dà problemi sento solo un fruscio ...ho installato la 10.8.3 come posso risolvere?

Share this post


Link to post
Share on other sites

Ciao, ho seguito la guida e riesco a portare a termine l' operazione solo che al boot, anche se scelgo la pendrive, a video resta sempre un cursore lampeggiante, come se non ci fosse nulla da avviare. Sapete come potrei risolvere?

Share this post


Link to post
Share on other sites
Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By hornpipe2
      I have a Mac Mini 2006 (upgraded) with Intel GMA950 graphics, running MLPostFactor 10.8.5.  It is connected to an ASUS VS197 LCD panel using DVI-D.  This is natively a 1366x768 panel that is recognized and works fine.
       
      However, the other choices for resolution are 4:3 800x600 and 1024x768, and then the oddballs 832x624 and 1360x768.  None of these are useful as a low-resolution widescreen for gaming or watching DVD content.  Specifically I want to get access to 848x480 or 854x480, and also 1024x576.  SwitchResX makes these choices available, but it doesn't work with a "full screen" game, presumably because the game directly queries OSX Display to get a list of valid resolutions and SwitchResX is bypassing that system instead.
       
      So the solution is obvious: buy a new computer pull the monitor's EDID data, hack it to enable new resolutions, and then tell OSX to use this custom EDID instead of the one retrieved from the monitor.
       
      Following the steps of the EDID injection guide, here is where I am:
       
      * Retrieve EDID, DisplayVendorID etc from ioreg.
      00 FF FF FF FF FF FF 00 04 69 F2 19 24 94 00 00 31 16 01 03 80 29 17 78 EA F5 45 A4 55 50 9E 27 0F 50 54 BD EE 00 81 C0 01 01 01 01 01 01 01 01 01 01 01 01 01 01 66 21 56 AA 51 00 1E 30 46 8F 33 00 9A E6 10 00 00 1E 00 00 00 FD 00 32 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 41 53 55 53 20 56 53 31 39 37 0A 20 20 00 00 00 FF 00 43 43 4C 4D 54 46 30 33 37 39 32 34 0A 00 F1 * Use an EDID editor to enable new 848x477 and 1024x576 resolutions.  (Verify with an online EDID tool, and compare to the previous version)
      00 FF FF FF FF FF FF 00 04 69 F2 19 24 94 00 00 31 16 01 03 80 29 17 78 EA F5 45 A4 55 50 9E 27 0F 50 54 BD EE 00 81 C0 4B C0 4B CA 4B CF 61 C0 61 CA 61 CF 01 01 66 21 56 AA 51 00 1E 30 46 8F 33 00 9A E6 10 00 00 1E 00 00 00 FD 00 32 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 41 53 55 53 20 56 53 31 39 37 0A 20 20 00 00 00 FF 00 43 43 4C 4D 54 46 30 33 37 39 32 34 0A 00 47 * Create a new subfolder and plist within /System/Library/Overrides/Display/ containing the new EDID string and monitor name.
      * Reboot.
       
      Now the problems begin.  Even though the plist file is being read (which I know because the Monitor Name has changed in Displays), the custom EDID is not being used.  When I dig into IORegExplorer I am able to come up with AAPL00,EDID string and it is the unmodified one read from the monitor.  I even tried a plug-and-unplug while OSX is running, and also tried to reset the SMC and NVRAM, but no dice.
       
      Do I need to start digging into DSDT hacking?  Is the Intel driver pulling down EDID during boot and I need to override it somewhere else?  What am I missing here?
    • By DaniiSwan
      Hello,
       
      I've been attempting for the past few days to install OS X Mountain Lion on my Lenovo Thinkpad Edge E530 with little success. So much so that I've finally decided I'm probably out of ideas and created this forum post requesting help.
       
      My Laptop Specs are:
       
      Intel Core i3-2328m (Sandy Bridge CPU at 2.2GHZ with support for SSE2 , SSE3 and SSSE3)
      8GB RAM
      500GB Hitachi Z7K500 HDD
      Lenovo 627226G Motherboard (Intel HM77 Chipset)
      Intel HD Graphics 3000
       
      More Detailed Specs ---> https://drive.google.com/open?id=0B-GXUa1I8xyDZU1SdklDSlhER2c
       
      So far , I've attempted to install iAtkos ML2 and ML3U via USB and so far both have worked up until the first sighting of the apple logo then the laptop restarted. In both cases , I was using a separate USB with chameleon bootloader on but in the instance where I tried to use the onboard bootloader on ML3U , I hit enter and the screen simply remained black.
       
      Any help would be much appreciated
       
      Thank you for your time.
    • By VanekMedia
      Hey all,
       I built my first Hackintosh back in 2012 and its been runner amazing. Thank you again for the awesome guides and forums that made it all possible. I have however hit the end of this builds software limits. I am still running 10.8.2 mountain lion on the machine. I would like to update to Sierra and want to make sure I am clear on the procedures. Now that it seems like everything is could based and no longer get physical versions of OS.
      currently i am backing up the system using and external drive and "carbon copy cloner" as shown here: http://www.macbreaker.com/2012/06/backup-your-hackintosh-with-carbon-copy.html
       
      My question is should i follow the set via the App store updates, Wipe the system and start over or is there a better way to achieve running Sierra on my machine?
       
      Here are my build specs:
      Processor name: Intel Core i7
      Processor Speed: 3.50 GHZ
      # of cores: 4
      memory: 32gb
      Boot rom version: insanelymac.com
      Graphics Card: Nivda GeForce GTX 670
      System Version: OSX 10.8.2 (12c60)
      i have also attached screen shots of the spec to further help:
       
      Thank you for taking the time to help me out with my build. look forward to getting this bad boy updated.
       
       
      Mahalo,
       
      -VM




    • By OSXDev
      While most of the VMWare guest hardware is virtualized, the guest VM CPU reflects the same CPU features the physical host CPU has.
      This guide details the additional work that is needed to run OS X 10.8-10.12 with an AMD CPU under VMWare.
       
      If your AMD CPU supports SSE3 and SSSE3 (and SSE4.1 for OS X 10.12):
      The installation should be pretty simple:
      1. Install VMWare Workstation 8.0.6 / 9.0.4 / 10.0.4 / Player 6.0.4.
      2. Run VMWare Unlocker 1.3.0.
      3. Prepare an installation ISO from the untouched 10.8 (Mountain Lion) DMG using dmg2img.
      4. Create a new VM (select "Mac OS X 10.8" as the guest operating system).
      5. Set your 'number of cores per processor' to 1 (the number of processors can be set to more than one).
      6. A. For OS X 10.8-10.11:
      Open the .vmx file of the virtual machine and add the following lines:
      cpuid.0.eax="0000:0000:0000:0000:0000:0000:0000:1011" cpuid.0.ebx="0111:0101:0110:1110:0110:0101:0100:0111" cpuid.0.ecx="0110:1100:0110:0101:0111:0100:0110:1110" cpuid.0.edx="0100:1001:0110:0101:0110:1110:0110:1001" cpuid.1.eax="0000:0000:0000:0000:0000:0110:1111:0001" cpuid.1.ebx="0000:0010:0000:0001:0000:1000:0000:0000" cpuid.1.ecx="1000:0010:1001:1000:0010:0010:0000:0011" cpuid.1.edx="0000:1111:1010:1011:1111:1011:1111:1111" (this will identify the guest CPU as an Intel Core 2 Merom, and will help you avoid the 'The CPU has been disabled by the guest operating system. Power off or reset the virtual machine.' error)
       
      6. B. For OS X 10.12 Sierra:
      cpuid.0.eax="0000:0000:0000:0000:0000:0000:0000:1011" cpuid.0.ebx="0111:0101:0110:1110:0110:0101:0100:0111" cpuid.0.ecx="0110:1100:0110:0101:0111:0100:0110:1110" cpuid.0.edx="0100:1001:0110:0101:0110:1110:0110:1001" cpuid.1.eax="0000:0000:0000:0001:0000:0110:0111:0001" cpuid.1.ebx="0000:0010:0000:0001:0000:1000:0000:0000" cpuid.1.ecx="1000:0010:1001:1000:0010:0010:0000:0011" cpuid.1.edx="0000:1111:1010:1011:1111:1011:1111:1111" (this will identify the guest CPU as an Intel Core 2 Penryn which supports SSE4.1)
       
      7. If your Hardware compatibibility is set to Workstation 9.0 (virtualHW.version = "9") or 10, you must also add the following line:
      featureCompat.enable = "FALSE"

      8. You can now boot from the ISO and proceed with the installation.

      9. Even though I could complete the installation without a hitch with my A8-5600K, a few applications consistently crashed (e.g. Grapher), this was resolved by replacing the kernel with a modified kernel that emulates all missing SSE3 / SSSE3 instructions (see below).


      If your AMD CPU does not support SSSE3:
      You need to replace the kernel with one that has SSSE3 emulation (see below),
      the easiest way to do it is to use another computer that has SSSE3 to create the virtual disk and replace the kernel.
      1. After you have a working OS X machine, update to 10.8.5, make a copy of the virtual disk and attach it to the same VM.

      2. Change the os settings to show hidden files (see here), and delete the hidden 'mach_kernel' from the root folder of the attached disk.
      (alternatively, use the terminal to perform this, e.g. 'sudo chflags nohidden mach_kernel' or 'sudo rm mach_kernel')

      3. Put the modified kernel (see below) instead of the one you just deleted (use the same file name).

      4. Delete the old kernel cache by deleting the content of the '/System/Library/Caches/com.apple.kext.caches/' directory.

      5. Optionally: hide back the kernel (with 'sudo chflags hidden mach_kernel').

      6. Create a new VM, update the .vmx files to include the 8 cpuid.* lines from above.

      7. You can now use the attached disk to boot OS X 10.8.5 from a VM hosted with an older AMD CPU that does not support SSSE3.

      Tested With A8-5600K, A8-3850 and VMWare Workstation 8.0.6 / 9.0.4 / 10.0.4 / Player 6.0.4

      Modified Kernel:
      For your convenience, I have created a modified 10.8.5 kernel (a.k.a. xnu-2050.48.11) specifically to be used with VMWare, and attached it to this post.
      The only modification to this kernel is that it includes OpEmu3, the SSE3 and SSSE3 emulator created by Sinetek and AnV (thanks guys!).
      This emulator is only used when necessary (i.e. if your CPU support a specific instruction, the emulator will not be used to execute it).
      The source code to OpEmu3 is available here and my adaptaion to 10.8.5 is available here.
      10.8.5-OpEmu3.zip
    • By Haris Usmani
      M​A​C OSX Mountain Lion on a Lenovo x61
       
      Hello everyone this is my first post on this forums so I hope I will recieve help. I have a Lenovo x61.
       
      My specs are:-
       
      Intel 965 Express Chipset
      4Gb DDR2 Ram
      250 GB HDD Hard Drive
      Windows 10 Enterprise                  
      ----------------------------------------------
      I want to install Mac OSX Mountain Lion with sound and WiFi on my laptop. I know Mac OSX Mountain Lion cannot be installed on Intel 965 Express chipset but I read an article on the internet that says that I can install with the help of  MLPF hack. So can you please help me to install Mac OSX Mountain Lion.
      ----------------------------------------------
       
      Thank you
×