1 post in this topic
Recently Browsing 0 members
No registered users viewing this page.
Please help me to enable and use hd 3000 with Mojave.
I know that I can install some .bundle or .kext files to make it can be enable.
But it always show an err msg up. "IOConsoleUsers gIOScreenLockState 3 ......"
I have tried to reinstall the refi drivers and kexts.
but still not solved this issue.
I will upload my EFI partition as a zip file below (Google Drive, Because It's bigger than 10 mb).
Thanks for helping.
For the details about my hardwares, please see my "About Me" page->Brian's Budget Hackintosh.
So apple has presented a new and updated mac mini a few days ago, and the great news seems to be the use of desktop processors in it, in fact, all the specs seems to match a typical desktop socket 1151 v2 coffeelake system without a dedicated gpu, so i am wondering if the smbios of this machine could be our new smbios of preference for coffeelake desktop machines. So i have created this new topic to discuss about it. Of course we will have to wait to do tests using the first public version of mac os which integrates this smbios, because when every new mac is released it's smbios is available initialy just in a purpose made mac os build and then it's added for all the os builds in the following releases.
So what do you think about the possibility of using this new smbios for desktop coffeelake machines instead of the imac 18.3/18.2 ones?
My Intel HD 630 isn’t functioning on MacOS Mojave (or High Sierra)
It only shows 5MB of VRAM.
Things i tried:
Clover IntelGFX (Fake ID)
Clover IG-Platform-ID (Need to use the one now or my Mac won’t boot)
Setting the NVRAM myself (Clover)
AppleIntelKBLFramebuffer.kext (Forced load by clover)
FakeCPUID (tried many different ones)
Other Clover settings:
SMBIOS: iMac18,2 (Native HD 630 Support, can’t get it to work)
My processor is a Intel Pentium G4620
NVidia 1050 GTX (Not supported on Mojave, Workaround is not my favorite)
If someone has any other idea whatsoever anything is welcome as I ran out of ideas and places for a answer (I’m the only one with the 5MB issue, others have 4 or 7MB)
This is bothering me for a long time now: Why does Apple deliberately disables the the RX4xx, RX5xx capabilities to hardware encode HEVC and is using Intel Quicksync instead? Is it to make the iMacPro look better than it is? I stumbled over a thread at tony-mac where people are going a totally different road for Radeon graphics. Instead of hassling around with getting Quicksync to work, they proposed to activate the AMD hardware renderer for Polaris GPU's. I tried it out and it works...somewhat
I used a dummy kext from that tomato thread and edited it, so that it enables the AMDU7V4 IOGVACodec like on Vega cards, switched to iMacPro1,1 SMBIOS from iMac18,3, disabled the IGPU and the results were astonishing:
My 3:34min 4k50p film was rendered by FCP with HEVC in 2:34 minutes. Nearly half the time than with Quicksync! With the iMac18 SMBIOS and the "help" of Intel Quicksync it took FCP 4:41 minutes to get it done!
The problem is: As soon as the "wrong" IOGVACodec is enabled H.264 encoding leads to Mojave crashing at once (be it FCP, QuickTime or Videoproc). Watching H264 material is fine, though.
If anyone has any idea how to handle this, I would be very grateful. I would even accept Mojave using software encoding for H264 if I could keep this amazing speeds on HEVC!
BTW: Without IGPU on iMacPro1,1 SMBIOS no problem with DRM or iTunes, no need for Whatevergreen or Shiki. That is a bonus
Due to Apple's QA, an update to Mojave will come when Mojave reaches its second 2nd point release (aka .2)
The H370 chipset powers 8th generation Intel Core-i CPUs. Even though the name H370 rings comparable to Z370, the H370 is based on newer silicon. This it also requires some new approaches compared to the Z370. An example would be on-die USB 3.1 and WiFi support.
Since this guide is not a "hold-your-hand-every-step" guide, I assume you know:
Clover installation and configuration How to create an install medium for MacOS Access and configure the BIOS Have heard of ACPI patching (I'm a newb at this myself)
Sleep (via DSDT edits and emulated NVRAM) On-board Audio (via CloverALC script) Native power management (without any kext or patch) All USB ports (and only those present are active) iGPU for both acceleration and display dGPU (I'm running an Nvidia GTX 1080)
NIC --> I'm using WiFi only
What doesn't work
Native NVRAM via AptioMemoryFix.efi DMVT Pre-alloc higher than 64MB (but not necessary)
Changes to the guide:
22.5.18: Added SSDT hot-patching to enable sleep, replacing DSDT static patching as an alternative.
23.5.18: Add iMac18,1 as alternative SMBIOS config for those relying on the iGPU for output
25.6.18: Added update info
28.8.18: Small changes for clarity, changed info for afps loading & updated USB patch for 13.6
04.10.18: Update to Mojave will come once Mojave is more mature
This guide heavy inspired by the work of /u/corpnewt of /r/hackintosh and his (sorta) Vanilla guide
1.1 Create the install media for MacOS
Follow this, if you are using a Mac to start off with. If you are totally new to MacOS, then please check the basic guide Creation of an installer media in windows or linux
1.2 Install Clover on the install media
Using the Clover installer, ensure you are installing to the USB medium you are using for the installer.
Chose the following options, leaving the others on default:
UEFI driver: AptioMemoryFix UEFI driver: ApfsDriverLoader UEFI booting only Install to ESP
You have to get your hands on an apfs.efi. A google search can help, or extracting it from the Installer package. Make sure you procure a version matching the MacOS version you are about to install. Place the apfs.efi in drivers64UEFI.
1.2 Adjust the config.plist for the installer
You can use the config.plist attached as a guideline, but take a look at it before and at least adjust the SMBIOS - otherwise it won't boot.
Attention: The attached plist contains audio patches introduced by a post-install step. If you run into problems, you might remove those. It also contains a manual slide value, which should normally not be needed, but works fine for me. It is also tuned for usage with an Nvidia Pascal dGPU as main GPU.
The config you create now should serve you nicely for install and running the system.
Take care of adding the following basics:
SMBIOS: iMac18,3 - You can generate a serial number via Clover Configurator. The creation of a proper SMBIOS is covered in many guides to good extend Note: If you aim at using the iGPU for output, a user reported that iMac18,1 works better - since iMac18,3 produces sever flicker. Look at the graphics section and adjust the injection for Intel to your situation
Change 0x59120003 to 0x59120000 if you don't use a dGPU as your main display Driver and instead use the iGPU for output.
Also note. SMBIOS iMac18,1 has been reported to work better in this configuration. But 18,3 works fine for me.
Kernel and Kext patches
1.3 kexts and friends
Add the supplied SSDT-UAIC.aml to "patched" - it limits the injected USB Ports to the actual number and ports valid for this board.
Required kexts on "Other":
FakeSMC.kext IntelGraphicsFixup.kext Lilu.kext When having an Nvidia card: NvidiaGraphicsFixup.kext IntelMausiEthernet.kext in case you're running Ethernet USBInjectAll.kext with the HCI-300-series-injector.kext --> These two should be installed to /L/E after install
We are leaving sound out at the moment, this is something for post-install. Please note the absence of Shiki, I don't find it necessary. Video material I tried made use of the iGPU without shiki.
1.4 Check BIOS and install
You should be ready for install. But before you reboot, please take a look at your BIOS and set it up accordingly (copied from the aforementioned guide and adapted):
Load Optimized Defaults Disable VT-d setting If your system has Secure Boot Mode, disable it Set OS Type to Windows 8/10 or OtherOS - I have not seen a difference Turn off internal Serial and Parallel port Turn off Network stack for boot Turn off wake-on-lan (for now) Set XHCI Handoff to Enabled Don't enable decode over 4G Depending on your GPU, set priority for boot Set internal GPU to enable Set DMVT pre-alloc to 64MB Set USB legacy to enabled Activate XMP profile 1 f your Ram has it (mine doesn't and I added the timings manually) Set ERP to enable, disable platform power management (I need to do more research if this could be enabled)
I've attached my current BIOS config "hack2". You can place that on a fat32 drive (the EFI partition of your install USB drive might be an idea) and see if it loads. It's made for and with the F2 BIOS.
The install itself should be like other MacOS Hackintosh installs with it several reboots and ensuring to select the correct boot device in Clover.
2.1 Install clover on target
This is a no-brainer, but install a fresh copy of Clover on your target medium.
During install select again AptioMemoryFix but also additionally
EmuVariableUefi-64.efi Install RC scripts on target volume because otherwise NVRAM doesn't seem to work
After the install, copy
config.plist contents of "Other" content of "patched" apfs.efi from drivers64UEFI to your new clover install.
2.1 Edit ACPI for slumber
Choose one option, not both. The hot-patch is experimental, but for the moment it is stable.
2.1.1 Edit DSDT
This is necessary only once on initial install and every time, you edit or upgrade the BIOS. The DSDT.aml attached to this post might work for your system or give you a file to compare to. Don't expect it to work for you, though.
I won't go into the details of DSDT extraction and patching. There are better guides (the linked guide is a rip-off of rehabman's guide from a different forum). Please follow such a guide to extract your ACPI data.
Locate and disassemble the DSDT with the newest iasl binary you can put your hands on, then open it with MacIASL in its newest version you can find (Hint: Here is a good source) You can check if the version is new enough if MacIASL doesn't throw error upon compiling a freshly extracted DSDT.aml or DSDT.dst
Add rehabmans repo (as per linked guide) and apply the following patches:
Rename _DSM to _XDSM Fix _WAK Arg0 v2 USB3 _PRW 0x6D Skylake (instant wake) Find the CNVW device and remove the _PWR function there.
Compile the DSDT and place it in "patched".
2.1.2 Use SSDT hot-patching
Instead of having to re-extract and re-patch the DSDT on every BIOS change or update, Hardware change one can also use ACPI hot-patching.
It's a combination of config.plist patches and an SSDT, which is hot-patched into the ACPI (if I understand the process correctly)
You need to add this SSDT-GPRW.aml to your Clover folder in the designated position at Clover/ACPI/patched You need to add this patch to your config.plist. It goes into the DSDT patch section
Note: This works for me, but the patch removes the _PRW method from all devices in the DSDT. This could have side-effects. So far, I have seen none. At the moment I'm also not applying any other patch, compared with the additional edits I made to the DSDT method before.
2.2 Install kexts to system
As mentioned in the install section, it's better to follow rehabman's instruction and install USBinjectAll.kext to /L/E:
sudo cp -R Release/USBInjectAll.kext /Library/Extensions sudo touch /System/Library/Extensions && sudo kextcache -u / 2.3 Enable onboard Audio
This is where I'm not so happy currently, I'd like it to work without altering AppleHDA. But currently I find no other way.
2.3.1 Install FakePCIID & FakePCIID_Intel_HDMI_Audio
Rehabman tells us to use a kext installer to install it to /S/L/E. Chose the RELEASE folder
2.3.2 Run CloverALC command
Ensure your EFI partition is mounted before running this command
Get the newest version of CloverALC command (audio_cloverALC-xxx.sh) and run it. Our Audio codec is RTL887 and I'm running with layout ID 1
2.4 Optional steps
If you have a dGPU, now it's the time to install its drivers and adjust the config.plist for it.
This is out of scope of this guide. Yet, my supplied config.plist is ready to be used with Nvidia Pascal cards and using the Nvidia web driver.
Updating inside 10.3.x point updates doesn't require much attention:
Download the update from the AppStore as any Mac would do Allow the system to reboot Before booting MacOS with Clover, make sure to disable extra drivers for dGPUs which require non-native support. If using an Nvidia dGPU: Remove "nvda_drv=1" from your boot arguments and disable Nvidia injection If using a non natively supported AMD card, do the same for AMD (I'm not using AMD, thus I cannot be specific) Boot into the newly created Install MacOS partition Repeat this process until the Install partition is gone Boot MacOS again, still following 3., and potentially install updated drivers Your Audio might require re-patching
Move away from static DSDT patching to SSDT hotpatching --> requires my work Native NVRAM --> requires developer work Audio without AppleHDA patching --> requires developer work
5. Thanks to
@MaLd0nfor helping finding the right way with the DSDT
@RehabMan, for being a legend and helping me out patching
@toleda, for audio patches for the 300 series
/u/corpnewt, for his superb vanilla guide
@wmchris for his super XPS 9550 guide and introducing me to hot-patching
all the developers of clover and it's awesomeness