Jump to content
Sign in to follow this  
Followers 0
wodorost

DSDT MSI X58 pro-e [no ALC889 working with AppleHDA]

1 post in this topic

Recommended Posts

Hi

 

I tried my best with DSDT and followed all tutorials for this MoBo i could find, but they allways point to the Voodoo kext. Unfortunately this sollution is simply not good enough for me. I have very strong noise in my spekers with all the voodoo kexts and it is vital to me that the sound is clean.

 

Soo if You have a sollution better then I then I would be glad to hear it [sic!]

 

So far i installed retail 10.7 with the live DVD (regae) then did the combo 10.7.2. With my DSDT.aml copied to the desktop I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 4.2.1 and checked:

 

+ user DSDT Install
+ System Utilities
- Drivers
 - Kexts
   - Audio
     - Realtek ALC8xx
       + ALC8xxHDA
       + AppleHDARollback
   - Disk
     + 3rdPartySATA
     + Jmicron36x ATA
   - Network
     + Realtek Gigabit...

 

I see in SystemUtil that the HDA kext is working (I see input and output choices) but i can't hear a thing.

 

The system is stable so far (no booting in verbose mode to avoid kernel panic as before) but still no clean sound, well no sound at all...

 

Any help will be nice!!!

 

There is a DSDT for MSI X58 pro-e in attachment (extracted in linux and patched with DSDTeditor and debugged in DSDT SE

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By kylon
      A big thanks to wegface for teaching me a lot of things.
       
       
      Tested on Catalina 10.15.4 and Clover EFI 5104 (Catalina Patcher)
       
      Not Working:
      - realtek sd card reader (pm me if you have a fix)
       
      Notes:
      **CPU patches are disabled, if you are using a locked BIOS you must enable them**
       
      Clover EFI:
      - Install it in UEFI Mode and change your hdd partition table to GPT.
      - You will be able to install ANY OS in EFI mode, even if this pc does not support EFI at all! (No guide available for this)
       
      You will need:
      My unlocked BIOS (OPTIONAL) (here) Latest Clover config from CCE Bank (here) (asus k53sj-kylon) Rehabman Voodoo PS2 Controller (here) acidanthera AppleALC (here) acidanthera Lilu (here) acidanthera VirtualSMC (here) acidanthera SMCBatteryManager (here) acidanthera SMCLightSensor (here) acidanthera WhateverGreen (here) Mieze Realtek RTL8111 (here)
    • By AppleCampus
      My computer was using Intel core i5-4210u ,My computer was using Intel core i5-4210u ,Sound card is cx20751/2,I use applealc inject id=3 successfully drive my onboard soundcard,but I found that HDMI Output is still no sound,how can i deal with it?
    • By ITzTravelInTime
      KX AUDIO DRIVER MOD
       
      Hi guys i am a small developer, i really like to use my sound blaster cards on my machines and i love also coding, so when i find the source code for the kx audio driver on git hub and then Eugene, the creator of kx audio driver decided to no longer maintain the project, i decided to start working on a mod of this driver and maintain it. 
       
      With my mod, created starting from the sources of the last official version of kx audio driver and all the small commiunity updates, i am working to keep the driver compatible with the latest mac os versions and to improove the driver over time.
       
      Supported cards are:
       
       - most of the Sound Blaster live!, live! 5.1 and live! 5.1 digital series (except for the cards not using the 10k1 architecture)
       - sound blaster pci 512 and pci 256
       - Sound Blaster Audigy, Audigy 2 and Audigy 2 zs series
       - E-MU cards based on the 10k2 sound chip (like the EMU8852 aka 0404m, including the pcie version)
       - Sound Blaster Audigy 4 (SB0610 only) and the Audigy 4 pro
       - Sound Blaster Audigy RX (SB0155)
       - other creative and e-mu cards based on the (10k1,10k2, 10k2.5 and CA10300 based cards)
       
      The NOT supported cards includes (but are not limited to):
       
       - ES1370/ES1371/ES1372/ES1373 based sound cards
       - Any CA0106 based card and cards with similar architectures (like sound blaster live! 24 bit, sound blaster audigy SE SB0570, audigy LS and similars, but audigy SA is supported)
       - Any sound blaster x-fi (some of them works on macOS using a modified version of voodoo hda)
       - Any sound blaster recon3D
       - Sound blaster Audigy FX
       - Any sound blaster Z/ZS/ZX and similar series
       - Any sound blaster AE5/AE7/AE9 series
       - Any sound card without an emu sound chip
      - Any ISA Sound card
       
      In the time being the things i have modded or added with this mod are:
       
      - cracking and stability fixes
       
      - added a more proper support for the pci express Sound Blaster audigy rx SB0155 (which basically is an audigy 4 with a pcie bridge chip) 
       
      - more user-frienly names for the cards in the settings and other system menus (so the name will be, for example, SB live! 5.1 SB0060 instead of kx SB0060 [e880] witch was shown in the original driver)
       
      - added support to sample rate changing and bit resolution change (the absolte worst supported quality is 7 khz at 8 bit dept while the absolute best is 192 khz at 32 bit depth)
       
      - inputs support
       
      - added boot args to manage the driver (more info on those soon)
       
      What i'd like to implement but i don't know how to do:
       
       - fix the support when using more than one card, to get all the cards shown in the settings and other menus,
       
       - have the gameport/midi port of older cards to be used in mac os as a midi in/out
       
      If other developers would like to join and help they are free to do so, this is a free open source project afterall, and also an hand from other people with testing and feedback will be nice.
       
      LINKS and downloads:
               -  github repo:                                               https://github.com/ITzTravelInTime/kx-audio-driver   (kext download coming soon, since an update is coming)  
       





×