Jump to content
joshhh

[GUIDE] Lenovo ThinkPad T510/510i (plus T410 and W510) 10.6-10.7-10.8-10.9 all working OK! 2013.11.12 Update

499 posts in this topic

Recommended Posts

For the life of me i cannot get this to boot to the installer, once the apple logo shows it boot loops. I have tried several dsdt's and cannot get to the installer whatsoever.

 

I have attempted 10.9.2 and 10.8.5 vanilla installs with multiple boot flags but nothing seems to work. I updated the BIOS to the latest i'm starting to pull my hair out.

 

T510 Model 4384Y1K

i5 2.4gz/4gb ram /w Quadro NVS 3100m

maybe try cpus=1 or graphicsenabler=no

With Ludacrisvp's DSDT I get sleep and backlight working, but I cannot seem to keep the fan from running constantly.

Is that something to do with SpeedStep, and if so, how to get that working?

 

This is getting closer to being perfect... just a little more and it will be my daily machine :)

My speed step works from 1.2ghz up to 3.2ghz.

My laptop is always running pretty warm in general and even in win7 it's always running it's fan. I wouldn't trust a laptop to not run it's fans.

If you need vtx enabled for running VMs I've got a newer dsdt that I can upload I accidentally had it off when I made the first one.

Share this post


Link to post
Share on other sites
Advertisement

try remove the Gaphics Kext from USBInstaller , ATI* NVDA* AMD* AppleIntelHD*, you have a Extra folder in USBIInstaller, FakeSMC.kext in S/L/E ?

 

-f -v -x npci=0x2000 cpus=1

Share this post


Link to post
Share on other sites

Finally got everything working (memory execution needs to be turned on in BIOS).

 

Sound/Sleep/Backlight/Battery all work great! Also running 10.9.3

 

added some kext's for sound/battery on 10.9.3

 

also side note if you are running myHack.kext remove this. It has some older kext's in it that seemed to cause issues with upgrading. 

T510 10.9.3.zip

Share this post


Link to post
Share on other sites

Hello. I need help for choosing and installing kexts and dsdt files.

 

I already installed osx 10.9.3 via MyHack and extras from this post. OSX starts great, also QE/CI seems to work. But when i shutdown the Laptop, all lights go off but the fan never stops. What could be the reason for failure of shutdown process?

 

What kexts i need to install for NVIDA grafic or is it nativ working?

Brightness controlls react by pressing "pause" or "scroll down" but the display doesn't change brightness?

I think I must use an other kext. Which kext could work? Or is it related by dsdt?

 

Thanks in advance.

 

       

Share this post


Link to post
Share on other sites

Hello. I need help for choosing and installing kexts and dsdt files.

 

I already installed osx 10.9.3 via MyHack and extras from this post. OSX starts great, also QE/CI seems to work. But when i shutdown the Laptop, all lights go off but the fan never stops. What could be the reason for failure of shutdown process?

 

What kexts i need to install for NVIDA grafic or is it nativ working?

Brightness controlls react by pressing "pause" or "scroll down" but the display doesn't change brightness?

I think I must use an other kext. Which kext could work? Or is it related by dsdt?

 

Thanks in advance.

Go here. Select the dsdt that's right for you specs. Should be the second link on the bottom.

Share this post


Link to post
Share on other sites

OK, thanks i took the one for 256 MB NVS. Now it shutdown right but unfortunatally the brightness keys doesn't work. "Pause" do nothing yust disply brightnesslevel and "scroll" decreases the brightness level but the display still leave at full brightness.After using these buttons the touchpad chrashs and dont't work anymore.

 

What I have to do with the "*.dsl" file?

 

I think my installed kext for keyboard and tauchpad isn't compatible for that dsdt from linked post.

 

Do you know which one is the right?

 

Thanks. 

Share this post


Link to post
Share on other sites

I tried the kext for 10.8 from 1st post. Now brightness and touchpad working fine. but sound with speaker or headphone doesn't work. Any ideas?

Share this post


Link to post
Share on other sites

I tried the kext for 10.8 from 1st post. Now brightness and touchpad working fine. but sound with speaker or headphone doesn't work. Any ideas?

What kext do you have for audio? Patched AppleHDA or VoodooHDA?

Does it appear in preferences?

Share this post


Link to post
Share on other sites

i have the applehda. I found an addition for the chameleon boot plist with hda enabler=yes. Know sound works over headset and speaker. 

 

3 things left for fully working hackbook. Dou you know an vodoosdhc.kext for the integrated sd card reader. I think i read a post a few days ago in any forum but i cannot find it again.

In this thread i found one for t510 but it doesnt work, maybe it is another reader type.

 

2nd i have to check displayport, hdmi, and vga output.

 

and at last BT. I thought the book has build in BT, but there is no detected. Is there any way to check the connected hardware, also if its not osx compatible.

Share this post


Link to post
Share on other sites

i have the applehda. I found an addition for the chameleon boot plist with hda enabler=yes. Know sound works over headset and speaker. 

 

3 things left for fully working hackbook. Dou you know an vodoosdhc.kext for the integrated sd card reader. I think i read a post a few days ago in any forum but i cannot find it again.

In this thread i found one for t510 but it doesnt work, maybe it is another reader type.

 

2nd i have to check displayport, hdmi, and vga output.

 

and at last BT. I thought the book has build in BT, but there is no detected. Is there any way to check the connected hardware, also if its not osx compatible.

I have a T410s which doesn't have the SD card reader so can't test that. VoodooSDHC works for some systems, you could try it, just add in your device/Vendor ID. Check here.

You can find you dev/ven ID by running lspci -nn from the terminal. The utility is available if you use myHack to do your build.

Share this post


Link to post
Share on other sites

Does your battery indicator work correctly? the icon looks right but the informations are not shown. Remaining time is not displayed and the percentage level don't refresh.

Share this post


Link to post
Share on other sites

I use appleSmartBatteryManager. It works better. I noticed that there is a BT doughtier card integrated to the t410.its not detected in osx. Some Members got BT working. What kind of BT Card does they have? Do you know an kext for this BT doughtiercard of lenovo? 

Share this post


Link to post
Share on other sites

I'm on a T510, working great now.  

Bulletproof operations make this a real workhorse machine.

 

Internal LCD, sleep, backlight after sleep, etc. all working well.  

Speedstep is properly working according to HWMonitor.

Other than the card reader (no great loss), with one minor thing, this laptop would be a true HackBook Pro...

 

The external VGA and/or DisplayPort out - using as extended desktop, would be amazing.  

Is this possible with the Intel only graphics model?  I don't have nVidia.

Share this post


Link to post
Share on other sites

Hey folks, I am new here and wanted to ask a few questions.

 

I installed Niresh's Mavericks yesterday on my W510 - it took a lot of work but I finally got there.  I kept having issues with booting the installer - it seemed hit and miss.  Anyway, it is installed now but I am not happy with using a third party distro as I don't really know what might be in it, so now I know I can run Mavericks on my W510 I want to do it from scratch.

 

Couple of problems I noticed with the current installation:

 

1.  No WiFi - I am thinking of buying the Acer USB-N10 today to deal with this first annoyance, they are cheap locally and I read on this thread they work with Mavericks

2.  Doesn't shutdown properly - when I shutdown the W510 yesterday, the fans kept spinning, I had to manually power off the laptop before they would stop.

 

Now I am completely new to this although I have almost 20 years experience of Unix/Linux so I am hoping that will help.  I was thinking it would probably be a good idea to start with the guide on installing Mountain Lion so I can get to grips with setting up the build platform and doing a manual install - is this the recommended method?  Then I suppose I can just follow the guide on here for updating to Mavericks using the app from the App Store?

 

Is everything apart from WiFi working with W510 now if I use the files from this thread?  I was surprised to see the webcam works out of the box with Niresh install.

 

One thing I have not seen mentioned here or anywhere else is addon batteries.  I have one of these http://shop.lenovo.com/us/en/itemdetails/0A36304/460/D91DC49376D94C4690E7BA925BCE90CA slice batteries which attaches to the bottom of the W510 - will this work with OS X?

 

Thanks in advance for any replies and thanks for this informative thread (it is huge).  If anyone has any W510 specific advise for me, I am all ear/eyes or whatever you say for an online forum ;)

Share this post


Link to post
Share on other sites

Yes i managed to install yosemite :)

 

Watch my guide here : http://www.insanelymac.com/forum/topic/304814-guide-install-yosemite-on-lenovo-t410-step-by-step/


 

I installed Niresh's Mavericks yesterday on my W510 - it took a lot of work but I finally got there.  I kept having issues with booting the installer - it seemed hit and miss.  Anyway, it is installed now but I am not happy with using a third party distro as I don't really know what might be in it, so now I know I can run Mavericks on my W510 I want to do it from scratch.

 

Couple of problems I noticed with the current installation:

 

1.  No WiFi - I am thinking of buying the Acer USB-N10 today to deal with this first annoyance, they are cheap locally and I read on this thread they work with Mavericks

2.  Doesn't shutdown properly - when I shutdown the W510 yesterday, the fans kept spinning, I had to manually power off the laptop before they would stop.

 

We dont support distros i suppose BUT you can try one of the dsdt files. They will fix it (For me)

Share this post


Link to post
Share on other sites

Yes i managed to install yosemite :)

 

Watch my guide here : http://www.insanelymac.com/forum/topic/304814-guide-install-yosemite-on-lenovo-t410-step-by-step/

We dont support distros i suppose BUT you can try one of the dsdt files. They will fix it (For me)

Great !! :)

have a look here

http://www.insanelymac.com/forum/topic/285678-lenovo-thinkpad-t420-with-uefi-only/page-84,

you'll find tluck clover how to :)

you'll find very interesting information :) 

Share this post


Link to post
Share on other sites

i have a W510 and i can't install any MAC OS X (10.8.4 +10.9.5 +10.10.2) by clover with file downloaded in #1 this threat. Can everyone help me to install and kext full for my laptop on 1 in 3 OSX under? Thank all very much!

Share this post


Link to post
Share on other sites

i have a W510 and i can't install any MAC OS X (10.8.4 +10.9.5 +10.10.2) by clover with file downloaded in #1 this threat. Can everyone help me to install and kext full for my laptop on 1 in 3 OSX under? Thank all very much!

 

Welcome to the forum,

 

Create 3 partitions and install each OSX version to them ( I have to ask me whyyy ). But anyways continue with installing Clover to the EFI partition of the drive like seen in my thread. After that you will put my DSDT in the supposed direction and you will install wichever kexts you want in S/L/E.

 

Have fun

Share this post


Link to post
Share on other sites

Hi,

 

I need to install OSX on a Thinkpad T510: http://www.thinkwiki.org/wiki/Category:T510

 

It has a Intel® Core™ i5 processor i5-520M (2.40 GHz) with dual core, Intel HD Graphics, ThinkPad 11b/g/n Wireless LAN Mini-PCI Express Adapter II (Realtek RTL8192SE / RTL8188CE), etc.

 

I worked through a lot of general OSX El Capitan install tutorials but I never got to the install stage (with all kinds of errors). Is it impossible to install 10.11 on my T510?

 

Can somebody help me? Maybe with a minimal tutorial (just a config.plist and a kext-archive). Then I create the USB stick, replace the Clover config.plist and copy the kexts to Clover's 10.11 kext folder.

 

Cheers,

sb

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By y010204025
      Perhaps it was the first NEC (Lenovo) Lavie Z HZ550 to install hackintosh. I hope more people who like Lavie Z series can experience Hackintosh at HZ550. She is really great.
       
      I found HZ550 & HZ750 on the Chinese website, which is amazing. It weighs only 790g, 13.3 inches, and the standard 2k screen, which is too attractive to me. I am a Hackintosh enthusiast. I think HZ550 or HZ750 with MacOS is the best Unfortunately, the Lavie Z series is not listed in China, only exists in the Japanese and American markets, and in the Japanese market is the NEC brand, while the American market uses the Lenovo logo.
       
      Fortunately, I got an HZ550 from Taobao. Yes, not HZ750. In comparison, HZ750 has more touch screens and 360 ° flip. These are hard to attract me. More importantly, HZ750 is about 200g heavier than HZ550 That's why I chose HZ550. Well, because he is only 2,000 RMB.
       
      The specific introduction can refer to NEC Japan official website:http://nec-lavie.jp/products/hz13b/
       
      The HZ550 hardware list I obtained:
                                    
                       -/+:.          ningnan@ningnandeMacBook-Air
                      :++++.          OS: 64bit Mac OS X 10.15.5 19F96
                     /+++/.           Kernel: x86_64 Darwin 19.5.0
             .:-::- .+/:-``.::-       Uptime: 19m
          .:/++++++/::::/++++++/:`    Packages: 1
        .:///////////////////////:`   Shell: zsh 5.7.1
        ////////////////////////`     Resolution: 3840x2160
       -+++++++++++++++++++++++`      DE: Aqua
       /++++++++++++++++++++++/       WM: Quartz Compositor
       /sssssssssssssssssssssss.      WM Theme: Blue (Dark)
       :ssssssssssssssssssssssss-     Disk: 11G / 108G (12%)
        osssssssssssssssssssssssso/`  CPU: Intel Core i7-5500U @ 2.40GHz
        `syyyyyyyyyyyyyyyyyyyyyyyy+`  GPU: Intel Iris Graphics 6100
         `ossssssssssssssssssssss/    RAM: 4376MiB / 8192MiB
           :ooooooooooooooooooo+.    
            `:+oo+/:-..-:/+o+/-     
       
       
      Advantages: small size, light weight, 2K screen, 8G memory, 512g SSD, keyboard feels good, and wireless network card can be replaced, which is unimaginable in today's thin and light books.
      Disadvantages: The sound is small, almost the same as the mosquitoes.
       
      Ok, bragging is over!
      In order to use the wireless network, I changed the wireless network card from inter 7265 to BCM94352ZAE. Some people called it DW1560. It is uncomfortable that in China, this card and his elder brother DW1830 were hyped to a high price of 480RMB. of. Fortunately, I bought it early, and this card is also very stable under win10, and there is no high delay and outage. The hard disk should be PM951 of Samsung, not PM981, which is lucky.   Before installing Hackintosh: You need to prepare a 16G U disk, SanDisk is not a rough choice for making MacOS installation disk, I used the latest MacOS Catalina 10.15.5, got config.plist from Rehabman, and put together an EFI, the latest version of clover and kext drivers. Thanks to Rehabman and the developers of the Black Apple community. I do n’t like that OC team very much.
      Make an installation disk: If you have a computer running MacOS, you can use the command line to make it, if you do n’t have a computer running MacOS, you can try VMware, I know that the insanelymac forum allows discussion, or use ether to write the image to U disk, use the EFI I provided to boot into the installation process.   BIOS setting: Press F12 at boot to enter the BIOS settings, Tab switches to "Security-Secure boot", set to "DISable", this is what we need, and switch to "Boot -Boot devices", set the U disk as the first boot item You can directly enter the clover guide interface, please follow it for google it.
      It is worth noting that the remaining space of your EFI partition needs to be greater than 200M, otherwise, the disk format will be wrong. In addition, the format partition format is APFS, do not choose to encrypt, your data is not valuable, at least you must have this awareness of Hackintosh, the file safe is also the same, do not enable, do not use to find your mac, otherwise, change the machine, OK .   Fortunately, no additional ssdt patch is required. All the patch functions are implemented through clover. The flat Apple is turned on. This is to solve the problem of the flower screen. You can find a solution yourself.
      Experience your black apple, this will bring a better experience than MacBook Pro. EFI_HZ550.zip
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      -Donation with Mercado Livre 
      https://tinyurl.com/y9evkj5u
       
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      https://tinyurl.com/rkqmpd9
       
      --OpenCore Folder--
      https://tinyurl.com/y75hqg7z
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
    • By BigAl
      i am getting a new lenovo ideapad 3 ( 15ADA05)
       
      1920 x 1080 - Ryzen 3 3250U - 8 GB RAM - 256 GB SSD - Windows 10 Home 64-bit - AMD Radeon Graphics - Twisted nematic (TN) - English Keyboard - 0.3 Megapixel Front Camera - Bluetooth
       
      I would love to know if its possible to put mojave  on it. i am a noob  so currently still learning and trying to gain as much info as i can.
       
      If anyone could tell me if its possible and point me in the direction that would be great
       
      Thanks in advance
      Al
    • By Isptn
      Hi I am newbie to Mac development and currently trying to get info whether a display is captured, I found such info in doc: CGDisplayIsCaptured(_:).
      https://developer.apple.com/documentation/coregraphics/1562061-cgdisplayiscaptured.
      But this one is deprecated. How can I find out whether a display is captured in other way?
      The goal is: The app should be visible only for user not for those, who see shared screen. So II need to blur the app on screen capture or send notification to user that screen is currently capturing, so I need to know which event cold notify me about that.
    • By MSzturc
      Hello everyone!
       
      I know that a lot of you are using a Lenovo Thinkpad as Hackintosh. For those i've created an Assistant Application that allows you to use all your Function Keys on your Laptop. It should be compatible to all T-, R-, X- and E-Series Models with the right Keyboard mapping.
       
      Features
      Fn+F4: Mute / Unmute Microphone Fn+F7: Screen mirroring / Screen extending Fn+F8: Activate / Deactivate Wi-Fi Fn+F9: Open System Preferences Fn+F12: Open Launchpad  
      Demo
       
       
      Keymapping
       
       
      Download & Changelog
      GitHub
       
×