Jump to content
Sign in to follow this  
Followers 0
CyberTHE

[AIUTO] iAktos L2 si blocca al boot prima dell'installazione

7 posts in this topic

Recommended Posts

Salve ragazzi, sto provando ad installare iAktos L2 così da mettere Lion sul mio Notebook HP... Ho impostato il Boot correttamente da DVD, ma quando prova a farlo si blocca sulla schermata del Boot non permettendomi di fare niente, neanche di scrivere "cpus=1 busratio=15", ma si riavvia dopo circa 2 minuti ribloccandosi... cosa può essere? Il boot non è compatibile col mio PC?

Grazie :)

Share this post


Link to post
Share on other sites
Advertisement

Salve ragazzi, sto provando ad installare iAktos L2 così da mettere Lion sul mio Notebook HP... Ho impostato il Boot correttamente da DVD, ma quando prova a farlo si blocca sulla schermata del Boot non permettendomi di fare niente, neanche di scrivere "cpus=1 busratio=15", ma si riavvia dopo circa 2 minuti ribloccandosi... cosa può essere? Il boot non è compatibile col mio PC?

Grazie :)

Ciao, avevo lo stesso problema, io ci ho rinunciato ed ho installato con [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]...

Share this post


Link to post
Share on other sites
Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By iammask
      Requirements
      Pendrive 2.0 (>=8GB) "Install macOS Sierra app" (https://itunes.apple.com/de/app/macos-sierra/id1127487414?l=en)(Around 5GB) Working Mac  
      Installing Clover to USB
      Get a USB 2.0 Pendrive (8GB and above)
      Before you can partition the USB, you must determine what the disk identifier is. With the USB plugged in to the computer, use 'diskutil list':

      In Terminal:
      diskutil list In my case, output:
      /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage MacOS 500.4 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s5 4: Microsoft Basic Data DATA 498.8 GB disk0s4 /dev/disk1 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: Pendrive *8.0 GB disk1 As you can see my pendrive is available at /dev/disk1 (check yours).
      Now we are going to create partitions, In Terminal:
      diskutil partitionDisk /dev/disk1 1 GPT HFS+J "install_macos" R Output:
      Started partitioning on disk1 Unmounting disk Creating the partition map Waiting for the disks to reappear Formatting disk1s2 as Mac OS Extended (Journaled) with name install_osx Initialized /dev/rdisk1s2 as a 7 GB case-insensitive HFS Plus volume with a 8192k journal Mounting disk Finished partitioning on disk1 /dev/disk1 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *8.0 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Apple_HFS install_macos 7.7 GB disk1s2 Now as you can see partitions are created and your pendrive is ready to install clover.
      Download the Clover installer. Current builds are available on sourceforge: http://sourceforge.net/projects/cloverefiboot (chameleon, stolen and rebranded) 
      After Downloading the Clover installer,
      Install it to the Target "install_macos" partition  using "Change Install Location". Select "Customize". Check "Install for UEFI booting only", "Install Clover in the ESP" will automatically selected. Check "BGM" from Themes. Check "AptioMemoryFix.efi", "EmuVariableUefi-64.efi", "OsxFatBinaryDrv-64.efi" from Drivers64UEFI. After making your selections, Click "Install". Finally, one more EFI driver is needed, HFSPlus.efi:
      Download from : https://github.com/JrCs/CloverGrowerPro/raw/master/Files/HFSPlus/X64/HFSPlus.efi. Copy to /EFI/Clover/drivers64UEFI.  
      Kext Setup
      Remove all folders from EFI/CLOVER/kexts/ except 'Other'. Now Download These, FakeSMC.kext: https://github.com/RehabMan/OS-X-FakeSMC-kozlek VoodooPS2Controller.kext: https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller USBInjectAll.kext: https://github.com/RehabMan/OS-X-USB-Inject-All Lilu.kext: https://github.com/vit9696/Lilu IntelGraphicsFixup.kext: https://github.com/lvs1974/IntelGraphicsFixup RealtekRTL8100.kext: https://www.insanelymac.com/forum/files/file/259-realtekrtl8100-binary/  
      Setting config.plist
      Download it from the attachments, Unzip and replace EFI/CLOVER/config.plist
       
      Building the MacOS Installer
      In Terminal : 
      sudo "/Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia" --volume /Volumes/install_macos --applicationpath "/Applications/Install macOS Sierra.app" --nointeraction sudo diskutil rename "Install macOS Sierra" install_macos Now your Bootable USB is ready to install. Turn off your Laptop.
       
      Installing 
      Make sure you have adequate bios settings
       
      Then Follow:
      Power on laptop with pendrive connected to it. Continuously press "ESC". Select "Boot From USB" (i.e. F9) and select pendrive from the menu. Now it boots into Clover, with left-right arrow, select options. Select "Graphics Injector Menu". Under "Inject Intel" select "FakeID" and replace "0x00000000" to "0x12345678". Now return to main screen and select "install_macos". When grey screen comes, select DiskUtility. Format whole Hard Disk as "Mac Os Extended (Journaled)" with Name as "MacOS" Now quit DiskUtility and click "Install Mac OS Sierra" and select the newly created partition in previous step. Now installer will begin installing files (~15-20mins) and the restart. After restart again boot into clover(Follow Step 1-5) and again select "install_macos". Now Install screen will appear and continue installation. This time installer will install files to your target partition and create Recovery HD partition. Later on restarts. After restart again boot into clover(Follow Step 1-5) and again select "MacOS". If everything goes well, you will finish up the installation process and arrive at the Mac OS Sierra desktop.  
      Install clover to hdd.
      Congratulations!! Your Installation is complete!! 
      Now you need to fix things one by one.
       
      Will Provide fixes when I get time.
      config.plist.zip
    • By army2003
      Salve a tutti ragazzi volevo chiedere il vostro aiuto per creare un dsdt ssdt per il mio pc perchè attualmente ho delle temperature troppo alte vi do alcune caratteristiche 
       
      - CPU: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz
      - RAM: 6 GB 
      Vi allego un zip di un programma che vi potrebbe aiutare 
      Vi allego anche la mia attuale cartella EFI: https://mega.nz/#!XpAm3agC!PHDKeFdHl6yhpcKLuutwIg1kpyPcnPtUuuFVefzpFDQ
      spero in un vostro aiuto 
      Grazie in anticipo 
       
      HackInfo_Report_armandoperano.zip
    • By GalaxymaxiS
      Buongiorno Forum Italiano (????)
       
      Sono nuovo negli hackintosh, non so bene ancora come Funziona il tutto, ma mi serve il vostro supporto, 
       
      Premessa:  Conosco già il fatto che: L'Aspire One D255e non ha i Kexts del Wi-Fi e della Scehda video*
      (o nel caso con gli anni abbiano fatto i Kexts, vorrei avere i link se ci sono XD)
       
      In sostanza vorrei sapere se ci sono dei Kexts da installare dei seguenti pezzi hardware:
       

      Vi ringrazio in anticipo per il supporto che mi date, 
       
      Con amore,
      Utente Disperato ♥
      (Tocco di stupidaggine ci sta sempre xd)
       
      Se serve qualche Log o cose simili, basta chiedere
    • By MikixIT
      Salve a tutti ho installato OSX, Sierra 10.12.6 (16G29), grazie a questo forum
      Ho installato tutti i Kext necessari da Nvidia a quelli per l'audio HDMI,ethernet ecc..
      L'unico problema che  Mouse e tastiera USB collegati ad un hub FUNZIONANO, mentre senza hub usb non funzionano nelle altre porte, NELLE ALTRE PORTE PERO' FUNZIONANO PEN DRIVE USB,ho provato vari kext in rete mentre il Forum era in manutenzione
      Ma non riesco a farli funzionare su altre porte,vi allego La mia EFI( http://www.mediafire.com/file/mimomvp1on4ys58/EFI-MikixIT 12%3A03%3A2018.zip) E vari screen del mio OSX con info varie




×