Godowski Posted September 27, 2011 Share Posted September 27, 2011 Just wanna share my experience with community and write few words about my configuration (signature) and Lion. With kakewalk http://www.kakewalk.se , downloaded Lion from APP Store and USB Drive 8GB, you can do a bootable installation of Lion and you can do a clean install on empty hard drive. No need of Snow Leopard, and yes, you need some working Mac OS to prepare a USB. Installation went smooth, after that I updated my system to 10.7.1 and than run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] for Lion. There is DSDT.aml for this motherboard on http://www.tonymacx86.com/dsdt.php [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 4.0.2 settings: UserDST, PLACE CORRECT DSDT.aml FILE on Desktop, System Utilities: full; Audio: Realtek ALC8xx: ALC8XXHDA and AppleHDA roll back; <- ONLY these two DISK - IOAHCIBlockStorageinjector; Miscellaneous - FakeSMC, NullCPUPowerManagement; Network - Realtek Gigabit Ethernet 2.0.6; Bootloaders - Chimera v.1.5.4; System Definitions iMac 12,2; OSx86 Software - Kext Utility; Only this - don't try anything else like USB 3.0 etc After that with kext utility install sleep enabler from kext.com - newest one from 27 august. I think thats all - good luck Link to comment Share on other sites More sharing options...
Edkroket Posted October 29, 2011 Share Posted October 29, 2011 Just wanna share my experience with community and write few words about my configuration (signature) and Lion. With kakewalk http://www.kakewalk.se , downloaded Lion from APP Store and USB Drive 8GB, you can do a bootable installation of Lion and you can do a clean install on empty hard drive. No need of Snow Leopard, and yes, you need some working Mac OS to prepare a USB. Installation went smooth, after that I updated my system to 10.7.1 and than run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] for Lion. There is DSDT.aml for this motherboard on http://www.tonymacx86.com/dsdt.php [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 4.0.2 settings: UserDST, PLACE CORRECT DSDT.aml FILE on Desktop, System Utilities: full; Audio: Realtek ALC8xx: ALC8XXHDA and AppleHDA roll back; <- ONLY these two DISK - IOAHCIBlockStorageinjector; Miscellaneous - FakeSMC, NullCPUPowerManagement; Network - Realtek Gigabit Ethernet 2.0.6; Bootloaders - Chimera v.1.5.4; System Definitions iMac 12,2; OSx86 Software - Kext Utility; Only this - don't try anything else like USB 3.0 etc After that with kext utility install sleep enabler from kext.com - newest one from 27 august. I think thats all - good luck Here is my dsdt file for Bios F8 No USB after sleep Lion z68xp-ud3 F8 No need for "DISK - IOAHCIBlockStorageinjector" It has native SATA (no orange icons) Network here https://docs.google.com/uc?id=0B2RpaAfDQsme...L858N&hl=en it is from Lnx2Mac's Realtek RTL81xx Driver Ed Link to comment Share on other sites More sharing options...
Methanoid Posted November 23, 2011 Share Posted November 23, 2011 Guys Isnt USB3 working? And this is for using Onboard HD3000? Link to comment Share on other sites More sharing options...
rhalls Posted November 23, 2011 Share Posted November 23, 2011 Does sleep work correct on your machines? I have some USB Problems (scanner not recognized correctly), FireWire Problems (Error Messages in Console), Network Probnlems (internal NIC not connected after sleep) and Monitor Problems (Triple Monitors not recognized every time) after sleep. GA-Z68P-DS3 F4, OSX 10.7.2, [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Installation (4.02), PowerColor Radeon HD 6850, Core i7 2600k Link to comment Share on other sites More sharing options...
Methanoid Posted November 25, 2011 Share Posted November 25, 2011 Does sleep work correct on your machines? I have some USB Problems (scanner not recognized correctly), FireWire Problems (Error Messages in Console), Network Probnlems (internal NIC not connected after sleep) and Monitor Problems (Triple Monitors not recognized every time) after sleep.GA-Z68P-DS3 F4, OSX 10.7.2, [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Installation (4.02), PowerColor Radeon HD 6850, Core i7 2600k Different mobo.. try search for YOUR mobo? Now, back to topic... did you guys update to 10.7.1/2 using a downloaded Combo update or using the Software update feature? Was this before or after using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]? Link to comment Share on other sites More sharing options...
Bam Rock Posted December 28, 2011 Share Posted December 28, 2011 Anyone using the ga-z68xp-ud3 board with a PCI-E video card and has working hdmi audio? I know I can't be the only one out there doing this. I have a feeling I can get the dsdt edited to work properly but just wondering if someone else has it working yet. So far I have 10.7.0 running great. Networking and sound but no hdmi audio yet. Link to comment Share on other sites More sharing options...
Recommended Posts