Jump to content
ErmaC

[GUIDE] Lion 10.7 on Asus X58 (LGA 1366) i7 9xx

870 posts in this topic

Recommended Posts

need help for show the temps to the cpu and correct instalation of smbios, RTC, fakesmc and AppleACPIPlatform please!!!

motherboard p6t deluxe v2 and i7 920

and mavericks system

Share this post


Link to post
Share on other sites
Advertisement

I have white screen on the p6t6 WS revolution with ML 8.3 and Maverick after switching from Asus P5qc which has working with those instalations without problem.

The Ati HD5770 was not recognised in the first PCIe slot so I have instaled it in to 5th PCIe slot.

I am booting Snow leo without HD 5770 kext.

What  exactly kexts and DSTDT are needed?

Thanks in advance.

Share this post


Link to post
Share on other sites

Hi take a look here...599

 

And if you are on ML look at the Download section for the patched Kext like AppleACPIPlatform here

Yukon here

AUDIO AD2000b here

Patched AppleRTC here

BlockStorage here

 

Hope it help

 

Fabio

 

Thanks Fabio..This still works  :D

 

I just did an upgrade, and now I am using SSD and thing looks good so far. I am still on ML, need MAC to be stable. ML is good so far, less updates and very solid. I also have SL also on an old drive but SL has no support for GTX 580. Now looking forward to add 1 more SSD  :P

Share this post


Link to post
Share on other sites
Greetings! First of all, sorry! Not just for asking for something so outdated but also because of my bad english.

 

Currently I'm facing troubles to install Lion in my PC by using this method. The steps are very simple and straight forward while I'm still in solid ground --- a real Mac --- but as soon as I try to boot the flash drive on my PC, things become strange. At first, everything seemed to be going as expected, but, as soon as the apple icon came in, so did a top-left corner message that said something like the bellow message:

 

Bad display config block signature 0x55555555

ERROR: nVidia ROM Patching Failed!

 

The funny thing is that the message went out a couple minutes later and then, the screen froze. The gray background and the apple icon remained there forever. No error messages or log whatsoever! I have tried to use verbose mode to take a better clue... but things appeared to be flowing. Too many minutes later, appeared a message of kind: "Mac environment successfully setup". But, after that, the screen remains black and nothing else took place.

 

I know that my system isn't naturally suited to make a hackintosh. I mean, when I bought the hardware components my intention was to build a Linux workstation. But now, 2.5 years later, I need an at least decent, and if possible up to date too, Mac OS X workstation. And honestly I've never tried to build a hanckintosh before! If somebody could help me, it would be a lot easier to make it. I don't even know if this method is the most suitable for me in the first place. But, so far, it was the only one I've found that gives support to my system's mother board.

 

My system's hardware configuration is as follows:

 

Mother Board: Asus Rampage III Black Edition

     Processor: Intel Core i7-970 3.20 GHz ( Gulftown )

Graphic Card: 1x EVGA GTX 660 OC (This is the one on which the system display is connected)

Graphic Card: 1x EVGA GTX 580 (I use this as an auxiliary processing unit. This was unplugged by the time of installation)

           DRAM: 3x 4GB Corsair Dominator GT

              SSD: 1x Intel 520 Series 180 GB

 

*** The ones bellow were not plugged in when I tried to install the system ***

 

             HDD: 2x Seagate Barracuda 1TB 64 MB cache 7200 RPM

HDD: 1x Western Digital 1TB 64 MB cache 7200 RPM

 

PS.: My computer's display is a Samsung HDTV connected via HDMI. I don't know if it makes any difference, so, I decided to post it anyway.

Share this post


Link to post
Share on other sites

 

Greetings! First of all, sorry! Not just for asking for something so outdated but also because of my bad english.
 
Currently I'm facing troubles to install Lion in my PC by using this method. The steps are very simple and straight forward while I'm still in solid ground --- a real Mac --- but as soon as I try to boot the flash drive on my PC, things become strange. At first, everything seemed to be going as expected, but, as soon as the apple icon came in, so did a top-left corner message that said something like the bellow message:
 
Bad display config block signature 0x55555555
ERROR: nVidia ROM Patching Failed!
 
The funny thing is that the message went out a couple minutes later and then, the screen froze. The gray background and the apple icon remained there forever. No error messages or log whatsoever! I have tried to use verbose mode to take a better clue... but things appeared to be flowing. Too many minutes later, appeared a message of kind: "Mac environment successfully setup". But, after that, the screen remains black and nothing else took place.
 
I know that my system isn't naturally suited to make a hackintosh. I mean, when I bought the hardware components my intention was to build a Linux workstation. But now, 2.5 years later, I need an at least decent, and if possible up to date too, Mac OS X workstation. And honestly I've never tried to build a hanckintosh before! If somebody could help me, it would be a lot easier to make it. I don't even know if this method is the most suitable for me in the first place. But, so far, it was the only one I've found that gives support to my system's mother board.
 
My system's hardware configuration is as follows:
 
Mother Board: Asus Rampage III Black Edition
     Processor: Intel Core i7-970 3.20 GHz ( Gulftown )
Graphic Card: 1x EVGA GTX 660 OC (This is the one on which the system display is connected)
Graphic Card: 1x EVGA GTX 580 (I use this as an auxiliary processing unit. This was unplugged by the time of installation)
           DRAM: 3x 4GB Corsair Dominator GT
              SSD: 1x Intel 520 Series 180 GB
 
*** The ones bellow were not plugged in when I tried to install the system ***
 
             HDD: 2x Seagate Barracuda 1TB 64 MB cache 7200 RPM
HDD: 1x Western Digital 1TB 64 MB cache 7200 RPM
 
PS.: My computer's display is a Samsung HDTV connected via HDMI. I don't know if it makes any difference, so, I decided to post it anyway.

 

 

From a very quick analysis of you spec,

I think the problem come from your dual GFX...

Take a look in the DSDT section of the forum --> http://www.insanelymac.com/forum/forum/348-nvidia/

As you describe the system start with one gfx (already try with GraphicsEnabler=No ???) is not so easy get up and run two gfx w/o DSDT edits (not impossible but not easy)...

 

So I suggest you to try first with only one gfx plugged and with GraphicsEnabler=No, then to make you system to work with two card make the proper edits to your DSDT.

 

Hope it help.

 

ErmaC

Share this post


Link to post
Share on other sites
Hi, when i tried to install the hackintosh I let only one graphic card plugged. Initially I've used the gtx 660, but as I was not able to make it work, I've put gtx 580 instead. So, at this time, I have only one graphic card installed on the mother board. And I don't know whether it does any difference but it is in the first PCI-e slot. I've already tried boot in verbose mode and with GraphicsEnabler=No alike. But I've got no success either.

 

When I run verbose mode, the process stuck at this message:

 

Using 16384 buffer headers and 10240 cluster IO buffer headers

IOAPIC:Version 0x20 Vectors 64:87

IOAPIC: Version 0x20 Vectors 88:111

 

PS: The strange thing is that when I tried to use [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to create a Mountain Lion bootable flash drive, it worked fine. Despite audio, wi-fi, bluetooth which didn't worked anyway. And using the two graphic cards at same time. Also, when I tried to install bootloaders, the system was not able to boot anymore. So, currently I'm facing a deadlock. With this method, using OS X Lion, I cannot even boot to install the system. But with Mountain Lion in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], I can both install and run the system, but needs to be always booted by flash drive and no matter what I do, it has neither audio neither bluetooth.

Share this post


Link to post
Share on other sites
Hi there, sorry by ask it --- I know you guys don't like to support someone else's methods --- but, can you give me a help on setting up drivers, boot loaders and all of this things on a Hackintosh installed via someone else's method? 

 

Via this other method, I had success on both installation and running. I have just 4 complaints so far. Neither wi-fi, bluetooth and audio works.  And I'm unable to make it boot without a flash drive neither. Every time I've tried to install boot loaders and this sort of things I messed something up. As a consequence, the system no longer was capable to boot after that.

 

As always, thank you.

 

PS.: I got the audio working, well at least sound came out, by using Voodoo v0.2.1. But the sound quality was way bellow the acceptable. In the motherboard's manual, it is said that the onboard's audio card is a SupremeFX X-fi 2. I have searched in the web and so far I have discovered that this is not actually its model, but a commercial brand. Apparently, it has a Realtek card. I know it because at Asus Motherboard's page the Windows driver is of Realtek. But I haven't got any success using Realtek's drivers on the Hackintosh.

Share this post


Link to post
Share on other sites

Hi there, sorry by ask it --- I know you guys don't like to support someone else's methods --- but, can you give me a help on setting up drivers, boot loaders and all of this things on a Hackintosh installed via someone else's method? 

 

Via this other method, I had success on both installation and running. I have just 4 complaints so far. Neither wi-fi, bluetooth and audio works.  And I'm unable to make it boot without a flash drive neither. Every time I've tried to install boot loaders and this sort of things I messed something up. As a consequence, the system no longer was capable to boot after that.

 

As always, thank you.

 

PS.: I got the audio working, well at least sound came out, by using Voodoo v0.2.1. But the sound quality was way bellow the acceptable. In the motherboard's manual, it is said that the onboard's audio card is a SupremeFX X-fi 2. I have searched in the web and so far I have discovered that this is not actually its model, but a commercial brand. Apparently, it has a Realtek card. I know it because at Asus Motherboard's page the Windows driver is of Realtek. But I haven't got any success using Realtek's drivers on the Hackintosh.

Sorry. no support here for the tools mentioned.

 

Collect info about your board (also update and add it in your signature)

 

For what I know your on-board audio is a ALC889.

 

at this link you find a rew about your card with spec included http://www.hardocp.com/article/2011/08/03/asus_rampage_iii_black_edition_motherboard_review/#.UvMBTvhwc7s

 

ErmaC

Share this post


Link to post
Share on other sites

I'm a little afraid to post here since it seems like the thread is sort of dying out, but maybe someone could give me a hand. I used Lionize here recently to get OSX onto my PC (running P6X58D Premium with an nVidia 480 GTX and an Intel i7-930). It seems like the USB stick works, and getting it set up is flawless, but when I try to boot from the USB stick, I'm getting a kernel panic and I am unable to get to the OSX installer.  Here's a screenshot from verbose. Any help would very appreciated.

 

 

 

post-1310577-0-63479700-1393712420_thumb.jpg

Share this post


Link to post
Share on other sites

 

Hello,

 

Try this.

 

1. Shut down your computer

2. Change the USB port, connect it to another USB port

3. Make sure you have only 1 HDD drive and the USB Stick

4. Boot and see how it goes

 

Also, please post your system spec and OS (if any)

Share this post


Link to post
Share on other sites

Hi, first of all thanks for your help. I'm trying to install Lion on my Sabertooth X58 but I got stuck on "DSMOS has arrived" message. Any thoughts?? Thanks again!!

Share this post


Link to post
Share on other sites

Hello

 

What method did you use? DVD+bootcd or usb bootable?

 

If you're using usb, did you put FakeSMC in S/L/E?

 

A guide to explain a little more:

 

DSMOS has arrived is a error caused by fault of FakeSMC

Share this post


Link to post
Share on other sites

yh i have 

Nice to hear can you share how to do it for the user lfcfanatic?

 

happy hacking

 

OSBeast 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Maxi King
      Hi guys,
       
      managed it to Install Mountain Lion 10.8.3 on my PC. Just had to use the flags npci=0x2000 and PCIRootUID=1.
      But it does not boot after the installation (same flags as above) - it gets stuck at ACPI_SMC_Platformplugin and DSMOS does not arrive (look at screenshot). I've even tried -x etc, but it didn't work out.
      I've also tried to wait a bit longer, but the only thing that comes up is resettingIOCatalogue.
       
       
      MY Config is:
      Asus P6T SE
      Nvdia GTX 660 (non Ti)
      i7 920
       
      i've used ermacs Mountain Lionizer http://translate.googleusercontent.com/translate_c?depth=1&hl=en&ie=UTF8&nv=1&prev=_t&rurl=translate.google.com&sl=it&tl=en&u=http://www.insanelymac.com/forum/topic/276216-guida-usb-mountain-lion-automatizzata/&usg=ALkJrhhCHFFr6q62fAeiRvtgKGGlEyOLAg and i've chosen the smbios macPro 4,1 (because of nehalem etc etc)
       
      Maybe someone know how to help here?
       
       
    • By andrea__1979
      Ciao a tutti,
      avevo il pc con dual boot Mac OSX 10.8 e windows 7 tutto funzionante.
       
      ho avuto un problema con la scheda madre e l'ho dovuta far riparare.
      Dopodiché (i sistemi funzionavano) ho deciso di formattare per fare un po di pulizia su tutti i programmi che avevo installato.
      Ho eseguito la procedura con LIONIZE come avevo fatto in precedenza e riesco ad installare il sistema solo che al riavvio si blocca sulla schermata della MELA con la rotellina
       
      qualche idea? puo essere che abbiano cambiato qualcosa nella scheda?
      con lionize che imac corrisponde il mio pc?
       
      Grazie in anticipo a tutti!!!
       
      INTEL CORE I5 - 20GB 1333MHZ - ATI 5770 - HD 1TB
    • By ErmaC
      Schede madri supportate (Supported board):
      P6T Deluxe OK
      P6T Deluxe V2 OK
      P6TD Deluxe OK
      P6T OK
      P6T SE OK
      P6T WS Professional OK
      P6T7 WS Supercomputer OK
      P6T6 WS Revolution OK
      Rampage II GENE OK
      Rampage II Extreme OK
      SABERTOOTH X58 OK
      Rampage III Extreme OK
      P6X58D-E OK
      P6X58D Premium OK
      Rampage III GENE (OK)
      Rampage III Formula (OK)
      Rampage Black Edition NEED TESTER FEEDBACK
      P6X58-E PRO NEED TESTER FEEDBACK
      P6X58-E WS NEED TESTER FEEDBACK

      -----



      Premessa: questa è una guida, non un tutorial su problemi banali.
      Per poterla utilizzare occorrono conoscenze minime del mondo Hackintosh.
       
      NON risponderò a domande generiche del tipo: "come si fa a flashare il bios" "come faccio a mettere l'id della mia scheda nel kext" "come installo questo kext" etc, etc.
       
      Per le risposte a tali domande esistono le F.A.Q.
       
      Tali domande non verranno degnate di risposta senza alcuna spiegazione.
       
      Onde evitare domande ripetitive:
      Per utilizzare questo metodo di installazione dovete avere un sistema OSX funzionante sia Leopard o Snow Leopard già installarti oppure usare un vero Macintosh per poter creare la USB di installazione.
       
       
       

      _____________________


      Ci sono già svariati metodi di installazione di LION,
      Qui tratterò una installazione "semplificata" e mirata alle nostre specifiche schede madri.
      I ringraziamenti per l'idea originale vanno a tseug e alla sua guida [GUIDE] A fast and easy way to install Lion su cui si basa il principio di funzionamento e di preparazione dell'installazione.
       
       
       

      _____________________


      Cambiamenti:
      Giovedì 2 Febbraio 2012, LIONIZE V1.07 + Recreandae.
      Giovedì 13 Ottobre 2011, LIONIZE V1.06 + Recreandae.
      Sabato 17 Settembre 2011, LIONIZE V1.05 + Recreandae 1.02.
      Giovedì 8 Settembre 2011, LIONIZE V1.04 + Recreandae 1.01.
      Venerdì 2 Settembre 2011, LIONIZE V1.03 + Recreandae 1.00(beta).
      Martedì 30 Agosto 2011, LIONIZE V1.02.
      Sabato 27 Agosto 2011, LIONIZE V1.01.
      Mercoledì 24 Agosto 2011, LIONIZE V1.00.
      Martedì 16 Agosto 2011, aggiunto ALC1200 script fix per l'audio.
      Giovedì 4 Agosto 2011, aggiornato pacchetto base alla V1.4.
      Mercoledì 3 Agosto 2011, aggiunto supporto P6X58D-E e P6X58D Professional.
      Giovedì 28 Luglio 2011, aggiunto AD2000b script fix per l'audio.
      Giovedì 22 Luglio 2011, aggiunto supporto P6T WS Professional e P6T7 WS Supercomputer.
      Mercoledì 21 Luglio 2011, aggiornato Chameleon 2 RC5 alla versione 1203, nuovo unico pacchetto!.
      Mercoledì 21 Luglio 2011, aggiornato Chameleon 2 RC5 alla versione 1197 e aggiornati i pacchetti.
      Mercoledì 13 Luglio 2011, aggiornato il sistema di pacchetti: Ora Base + Scheda madre.
      Martedì 12 Luglio 2011, aggiornato Chameleon 2 RC5 alla versione 1155 e aggiornati i pacchetti.
      Sabato 9 Luglio 2011, aggiornato Chameleon 2 RC5 alla versione 1138 e aggiornati i pacchetti.
      Sabato 9 Luglio 2011, aggiunto pacchetto per P6T e P6T SE, Audio ALC1200.
      Sabato 9 Luglio 2011, aggiornato a Chameleon 2 RC5 1136, legacy plist, AD2000B full.
      Venerdì 8 Luglio 2011, prima versione dello script (Solo P6T Deluxe e le due derivate).


      _____________________


      English version of this guide is located here --> [GUIDE] Lion on Asus X58 LGA 1366 i7 9xx

      _____________________


       
      Ingredienti
      OS X Lion install app
       
       



      Un pendrive USB (8 GB) o una partizione libera. Daremo per scontato l'uso del dispositivo USB.
      Una partizione libera per ospitare l'installazione di LION. La quale verrà chiamata Lion.
      Lo script Installer LIONIZE*.

      Come dobbiamo procedere.
       
       
       

      --- PASSO 1 ---


       
      Per prima cosa assicuriamoci di avere l'installer di Lion nella cartella Applicazioni.
      Se avete comprato Lion dall'AppStore ve lo ritroverete già in tale cartella,
      In caso contrario se avete la GM spostatela dalla sua posizione (o copiatela).



       

      --- PASSO 2 ---


       
      Successivamente prepareremo il dispositivo "destinazione"
      In Utility Disco, formattiamo la nostra pennetta USB in Mac OS esteso (Journaled) e gli diamo un nome.
      Io l'ho chiamata USB Boot ma puoi usare il nome che vuoi.
      Assicurati che "GUID Partition Table" sia selezionato sotto "Opzioni..."



       

      --- PASSO 3 ---


       
      Scarichiamo >> LIONIZE
       



       

      --- PASSO 4 (FACOLTATIVO) ---


       
      Passaggio facoltativo ma obbligato se volete avere una installazione già aaggiornata alla 10.7.1
      Scaricate il .dmg da questo link http://support.apple.com/kb/DL1437 e successivamente spostate tale file nella cartella BOX di LIONIZE.
       



       

      --- PASSO 5 ---


       
      Doppio click sul file Lionize.command. e seguite le istruzioni style_emoticons/default/smile.gif
      Occorreranno circa ~15 minuti (senza update aggiuntivi) per il processo di preparazione della penna USB.
       

      --- PASSO 6 ---


       
      Ora avviate dalla vostra penna USB e installerete Lion su /Volumes/Lion.
      (consigliato usare Lion come nome della partizione che ospiterà OSX 10.7)
      Attendete il completamento del processo di installazione.
       

      --- PASSO 7 ---



      (Rivisto da Terzo33)


       
      Successivamente quando il sistema si riavvia (al fine dell'installazione), avviate nuovamente dalla penna USB.
      Aprite il terminale dal menu Utilità (subito dopo la schermata di selezione della lingua di installazione) e digitate:
      ./finalize /Volumes/Lion
      aspettate che venga finito il processo di finalizzazione e scrivere sempre da terminale:
      (per riparare i permessi)
       
      1)
      diskutil repairPermissions /Volumes/Lion  
      aspettate che venga finito il processo
      (per ricostruire la cache)
       
      2)
      kextcache -v 1 -a i386 -a x86_64 -m /Volumes/Lion/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions  

      aspettate che venga finito il processo


      (per riavviare)
       
      3)
      reboot  
      Potete estrarre la vostra penna USB e avviare normalmente la vostra nuova installazione di LION da disco duro.
       
      Abbiamo finito.
       
       

      --- PASSO 8 (ALTERNATIVO)---


       
      Come aggiornare il mio nuovo Lion 10.7 a 10.7.1, 10.7.2 o 10.7.3?
      Avete bisogno di una partizione alternativa di OS X dalla quale avviare per Riparare/muovere ricostruire la cache ecc...
      Aggiorna Lion 10.7.0 a 10.7.1 o 10.7.2 o 10.7.3
      Avvia Recreandae
      Riavvia usando la partizione alternativa di OSX (es: Snow o Leopard oppure un'altro Lion)
      Aprite il terminale ed entrate in sudo mode
      sudo -s
      Enter your admin password
      ora...

      vsdbutil -i /Volumes/il_nome_della_vostra_partizione_Lion

      Ora suggerisco di muovere FakeSMC dalla cartella Extra/Extensions alla cartella System/Library/Extensions
      Per lo scopo potete usare Kext Wizard
      (Nel mio caso ho anche spostato l'AppleVIAATA.Kext)
      ora che sono stati rimossi i file dalla cartella Extra/Extensions (Stiamo parlando sempre della partizione Lion che andiamo a "riparare")
      Sempre da Kext Wizard ora ricostruiremo la cache e ripariamo i permessi del disco....
      questo passaggio può essere abbastanza lungo...
      ok usciamo dal sudo mode (Terminal)
      exit

      Ora potete riavviare dalla vostra partizione di Lion recentemente aggiornata.


      -------------------------


       

      Post Install


       
      Navigate fino alla cartella Extra della vostra nuova Installazione di Lion e troverete la cartella Pack
      essa contiene gli aggiornamenti che avete deciso di includere durante il processo di creazione dell'installer Lionize.
       

      -------------------------



      Miscellaneous


       
      DSDT già modificati (Gli stessi inclusi/usati da Lionized e Recreandae).

      Asus P6T Deluxe
      Asus P6T SE
      Asus P6T WS Professional
      Asus P6T
      Asus P6T6 WS Revolution
      Asus P6T7 WS Supercomputer
      Asus P6X58-E PRO
      Asus P6X58-E WS
      Asus P6X58D Premium
      Asus P6X58D-E
      Asus Rampage II Extreme
      Asus Rampage II GENE
      Asus Rampage III Black Edition
      Asus Rampage III Extreme
      Asus Rampage III Formula
      Asus Rampage III GENE
      Asus SABERTOOTH X58

      Fabio
       
      Credits:
      Thanks to tseug for his mkboot scrips (this script is based on his job)
      Thanks to digital_dreamer (MAJ) for the splash screen
      Thanks to mm67 for the lot of test on SabertoohX58
      Thanks all involved in this project.
    • By ErmaC
      20 Marzo 2013 - Aggiornamento news:
      Lo staff di InsanelyMac ha realizzato un Tool per l'installazione/creazione di Lion e Mountain Lion Il Vaso di Pandora - Lionizer
       
       
       
       



       
      Ciao a tutti vi presento Mountain Lionize.
      Questa è una procedura automatizzata che crea una USB avviabile a partire da una immagine dmg (al momento la Mountain Lion DP1).
      Evitandovi lunghi e noiosi passaggi con il terminale (dove è facile commettere errori).
      Non supporta l'aggiornamento da Snow Leopard 10.6.x o Lion 10.7.x
       
      Occorrente:
      Un sistema OS X pre esistente
      Immagine dmg di Mountain Lion
      Una penna USB da almeno 8Gb (formattatela da Utility disco in GUID e chiamatela "USB Boot" facoltativo)
      Lo script Mountain Lionize

      Come funziona???
      Scaricare lo script Mountain-Lionize.1.09.3.zip e scompattarlo,
      per comodità copiatelo nel desktop.
      doppio click su "MLionize.command"
      e seguite le istruzioni.
      Per prima cosa vi chiederà la vostra password per i diritti di amministratore.
      Successivamente si avvierà il vero e proprio script e vi chiederà in quale lingua "operare".
      Successivamente vi chiedera di trascinare l'immagine .dmg nella finestra del terminale.
      Stessa cosa per la vostra penna USB... trascinate l'immagine che avete dal desktop nella finestra.
      Ora lo script inizierà il processo di creazione della USB impiega circa 10/15 min dipende dal vostro sistema
      Il passo successivo è quello di scegliere il tipo di "personalizzazione", questo script è il derivato di Lionize per le Asus X58,
      al quale ho preservato le modifiche, se la vostra scheda madre non è una Asus X58 scegliete l'opzione 1
      Prossimo passo e scegliere il modello di Mac preferito
      Ora la risoluzione dello schermo del Bootloader (chameleon)
      Finito

      Considerazioni.
      - Ultimato il processo di installazione se avete una cartella Extra funzionante (magari dal precedente Lion?) disinserite e reinserite la chiavetta e sovrascrivete la cartella Extra contenuta nella penna USB con la vostra.(Attenzione al tema di chameleon è stato aggiornato!)
      - Il processo di preparazione installa FakeSMC.kext direttamente nella cartella S/L/E della pennetta usb...
      - Il processo di preparazione ha già ricostruito la cache per la pennetta USB.
      - Il processo di preparazione installerà Chameleon 2.1svn della mia branch per il supporto d'avvio di ML.
      - A cosa serve la cartella BOX? A nulla per il momento (prevedo di utilizzarla per futuri aggiornamenti).
      - Solo se avete una AsusX58, potete utilizzare il comando finalize come per il suo predecessore.
       

      ================= Post installazione =================


      Molto probabilmente dovrete installare un bootloader manager (Chameleon / XPC / Clover) dato che l'installazione fatta non provvede a tale fine.
      Lo kext Fakesmc va installato nella cartella /S/L/E/ (/System/Library/Extensions/) il percorso si riferisce al volume dove avete appena installato Mountain Lion.
      Aggiornamento 23 Ottobre 2012 nuovo AppleAHCIPort.kext dettagli al post#201 credits to eep357

      Link utili.
      Kext Wizard.
      Questa meravigliosa utility vi aiuterà nel processo di installazione e riparazione degli kext ricostruzione cache ecc...
      Chameleon Wizard.
      Questa utility vi aiuterà nel processo di installazione/aggiornamento del bootloader.
      Binari e Installer del bootloader Chameleon.
      In questo topic trovate sempre le ultime versioni (in formato binario o Installer) del bootloader Chameleon.
      Fakesmc (Hardware Monitor).
      In questo topic potete trovare informazioni e lo kext Fakesmc.

      nuovo Mountain-Lionize.1.09.3.zip
      vecchio Mountain-Lionize.zip
       
      Fabio
×