Jump to content
InsanelyMac Forum
gbuzogany

[1337] QE/CI x3100 (GMA965 0x2a02) on Lion GM

Recommended Posts

hey thanks ... but in the zip file is missing AppleIntelGMAX3100.kext

 

 

 

 

 

sorry about that..... now with all files included https://rapidshare.com/files/3911399289/GMA...00-Complete.zip

 

i do the guide with chameleon rc5 1083, but still no luck with my graphic adapter driver, still suck,,, :D

 

i have compaq 2210b and with gma 965, when using stock driver it can play video but my mouse is LAG, and i change my vga driver from

http://www.kexts.com/view/1148-x3100_64bit...w_and_lion.html

 

and mouse LAG has gone away, but i video playback seem stuttering, doesn't have hardware acceleration

 

please anybody check my dsdt and other plist setting in attachment

 

 

did you boot on 32 bits? i can only get qe/ci on 32 bits, and have the mouse lag..... i was thinking that it was the synaptic kext, but thanks for the highlight, let me see if i can figure out whats the problem and let you know

Share this post


Link to post
Share on other sites
Advertisement
did you boot on 32 bits? i can only get qe/ci on 32 bits, and have the mouse lag..... i was thinking that it was the synaptic kext, but thanks for the highlight, let me see if i can figure out whats the problem and let you know

 

yes, 32bit,

with default stock driver, animation when open Launchpad is smooth, but no qe/ci description in system properties and also with mouse lag

 

then i 'm updated the vga driver and ps2 driver from

http://www.kexts.com/downloads.php?do=file&id=1448

 

can i use the stock driver, but remove the mouse lag and show qe/ci in system properties?

 

thanks in advance

Share this post


Link to post
Share on other sites
yes, 32bit,

with default stock driver, animation when open Launchpad is smooth, but no qe/ci description in system properties and also with mouse lag

 

then i 'm updated the vga driver and ps2 driver from

http://www.kexts.com/downloads.php?do=file&id=1448

 

can i use the stock driver, but remove the mouse lag and show qe/ci in system properties?

 

thanks in advance

 

 

i've installed the ps2 drivers and now have two fingers scroll but the lag still there, and when i checked system profiler

and don't say its enabled look..... http://f.cl.ly/items/1P2Y1c2G0O2p2R3R1F1U/....05.14%20PM.png

 

but when i opened an app i just work, like iMovie and the games, there is where i know that is enabled, hope it was helpful

Share this post


Link to post
Share on other sites
but no qe/ci description in system properties
Snow and Lion doesn't show QE/CI status in System Profiler.

If you can run DVD Player or Launchpad has smooth animations, everything just works.

 

I will check these drivers in a moment.

 

By the way, you can control brightness? Tell me about your Chameleon branch/version and show your smbios.plist file, specifically SMproductname, because sleep will depend on this.

 

I attach my current files, which runs brightness control (needed kext is here). I added a new version of iASL and slightly reworked patch for my Toshiba A200-1FJ with X3100 in DSDT Auto-Patcher - you know, maybe it can help somebody.

x3100_toshiba_a200_1fj_201108040851.zip

Share this post


Link to post
Share on other sites
i've installed the ps2 drivers and now have two fingers scroll but the lag still there, and when i checked system profiler

and don't say its enabled look..... http://f.cl.ly/items/1P2Y1c2G0O2p2R3R1F1U/....05.14%20PM.png

 

but when i opened an app i just work, like iMovie and the games, there is where i know that is enabled, hope it was helpful

 

owh,,, i see, so with the stock driver from Lion is already have qe/ci

but with default gma x3100 driver caused mouse lag. or it caused by other kext? or need update some ps2 driver? can you share your ps2 driver?

 

and you still have mouse lag? how to remove this lag?

i can't work without mouse and with mouse lag

 

Snow and Lion doesn't show QE/CI status in System Profiler.

If you can run DVD Player or Launchpad has smooth animations, everything just works.

 

I will check these drivers in a moment.

 

By the way, you can control brightness? Tell me about your Chameleon branch/version and show your smbios.plist file, specifically SMproductname, because sleep will depend on this.

 

I attach my current files, which runs brightness control (needed kext is here). I added a new version of iASL and slightly reworked patch for my Toshiba A200-1FJ with X3100 in DSDT Auto-Patcher - you know, maybe it can help somebody.

i can't control brightness with Fn key, cause these key doesn't work in my notebook. but i'm using Shades (DL from softpedia) to control brightness :D

http://mac.softpedia.com/get/System-Utilities/Shades.shtml

 

i'm using chameleon 2.0 RC5 r1200 VS and these my current smbios setting

http://www.insanelymac.com/forum/index.php...t&p=1729069

 

 

i'll try your kext to control brightness with keyboard, thank you for sharing

Share this post


Link to post
Share on other sites
but i'm using Shades (DL from softpedia) to control brightness
Shades (but I recommend Shady from Mac App Store - it works faster) is using just an software based overlay on screen. I'm now enjoying hardware brightness support with this shiny sun controller. (: Using 1st method from linked tutorial with GenericBrightness.kext. The only issue - my Fn+F6/F7 don't work, instead I can use Fn+F12/PauseBreak, but this is just cosmetic bug.

 

So, I've installed Champlist and moved from Chimera v1.4.1 r877 to Chameleon v2.0-RC5 r1269. Then I have changed SMBios.plist to MacBookPro5,1, simply replaced kexts with linked few posts up (+ permissions, etc.) and... I have a little :hysterical:P4030549.JPG

But then I've just removed GraphicsEnaber=Yes from org.Chameleon.boot.plist and voila! Menubar is using transparency, Lauchpad runs smoothly, so QE/CI works. 32bit of course.

 

Yes, I have mouse lag. Someone told me about renaming/deleting AppleUpstreamUserClient.kext, but this trick doesn't work for me.

 

Thanks guys. Now I've almost fully working hackintosh. Just few little devices, cosmetics and I will make clean install with App Store version.

Share this post


Link to post
Share on other sites

actually my cursor is jump every 3 second+ to another position, i can't figure it out how to solve this issue

 

so, i'm better use default vga driver from lion for intel x3100 / gma 965, then i should find a solution to fix my cursor jumping everywhere, do you have any clue ?

Share this post


Link to post
Share on other sites

I have HP 6730b laptop with GMA X3100 2a42. I 'm currently running Lion and previously SL 10.6.8 and I was never been able to use QE/CI.

 

Any one to advice how to enable it or it's only for 2a02 devices ?

 

Thx

Share this post


Link to post
Share on other sites

for a while i'm using steermouse to minimize random mouse cursor freeze and jumping till waiting new update driver for vga, ps2 or os ;):P

Share this post


Link to post
Share on other sites

I'm having random freezings.

*They can happen after hours of booted or just minutes => totally random

*No logs anywhere

*Mouse keeps moving and can be controlled by pad/usb

*SSH remote connection establishes perfect, can execute TOP command and everything seems keep working normally.

 

I'm confident this is a problem with GMA x3100 144mb 0x2a02.

My notebook is a Gateway M-series (m-6880):

 

 

 

It's a Gateway M-6880 Laptop:

 

CENTRINO SANTA ROSA Platform

CPU: Intel Core 2 Duo T7500 2.2 GHz

RAM: DDR2 4GB 667 MHz

Chipset: Intel Crestline GM965 Rev. 03/C0

Intel 82801HBM (ICH8-DO) Rev. F4

BIOS: Phoenix Technologies Version: 95.10 (i think it's the latest)

Graphics: Intel GMA X3100

Audio: Sigmatel STAC9205X

LAN: Realtek RTL8139/810x

WLAN: Broadcom BCM4311 (Original was an Intel 4965 AGN, incompatible)

DVD-R/RW: Optiarc AD-7563A

HDD: WD3200BEVT-22ZCT0

WEBCAM: Chicony USB 2.0 vendorID 04f2 productID b027

FINGERPRINT SENSOR: UPEK Touchstrip vendorID 147e productID 2016

Share this post


Link to post
Share on other sites

Finally!!!

 

Modified gma965/x3100 driver (32bit ONLY) for lion is worked 100% QE/CI and "NO MOUSE LAG/JUMPING CURSOR"

 

default lion gma965 driver is full QE/CI but has mouse lag/cursor FREEZE and JUMPING, on my laptop

 

but finally i found the right patched driver (only 1 file) at

http://www.kexts.com/downloads.php?do=file&id=1559

and use gma kext file (only 1 gma kext) and replace in S/L/E

 

or download single file AppleIntelGMAX3100FB.kext (150KB) here (its same file)

http://www.mediafire.com/?28i3vdq86off90n

 

 

 

 

GoodBye mouse lag ;)

 

hi, d23, you can try this gma x3100kext,,, just 1 file to be replaced into original Lion GMA x3100 kext :lol:

Share this post


Link to post
Share on other sites
Finally!!!

 

Modified gma965/x3100 driver (32bit ONLY) for lion is worked 100% QE/CI and "NO MOUSE LAG/JUMPING CURSOR"

 

default lion gma965 driver is full QE/CI but has mouse lag/cursor FREEZE and JUMPING, on my laptop

 

but finally i found the right patched driver (only 1 file) at

http://www.kexts.com/downloads.php?do=file&id=1559

and use gma kext file (only 1 gma kext) and replace in S/L/E

 

or download single file AppleIntelGMAX3100FB.kext (150KB) here (its same file)

http://www.mediafire.com/?28i3vdq86off90n

 

 

 

 

GoodBye mouse lag ;)

 

hi, d23, you can try this gma x3100kext,,, just 1 file to be replaced into original Lion GMA x3100 kext :)

 

 

 

Thank You So Much.... Now the mouse lag is totally gone!!!!!.... i'm getting closer to the perfect hackintosh machine ( now to work with sd card slot and wi fi)

Share this post


Link to post
Share on other sites

Hoping someone may be able to point me in a good direction to travel for assistance. I have a Dell Inspiron 1525 that I have modified slightly, [swapped the CPU, Ram, and Hard Drive to a T3400, 4GB's Ram, and my Insp1545's 250gb HDD], this machine has a GMA X3100 2a02 rev C, the AppleIntelGMAX3100.kext and FB kext all load, but I am not able to get QE/CI to work no matter what I try. I have SL[10.6.7] on the machine's original drive with working QE/CI, so I've tried it's kexts, and kexts.com's 10.6.2 64-bit drivers [using them right now], no ripple effect on dashboard when I unpin it as a workspace. logging in is choppy. No transparency on finder's menu bar. Entering and exiting full-screen apps is choppy, but sliding back and forth, and Launch pad as well, are all smooth transitions.

Forgot to mention that the stock kexts complain about missing info.plist and do not load at all for me, goes straight into no kext vesa only mode.

I activated OpenGL with an EFI string. I've tried Graphics Enabler set to both Y & N. arch=i386 always..as 64-bit won't ever boot. I forget where it gets stuck off hand atm.

I D/L'd and installed the installer from https://sites.google.com/site/nozyczek/home...l-inspiron-1525 for post-install use.

Used one of the sticky usb/chameleon tutorials on the 10.7 install forum to build the usb installer, got through that no prob after replacing the few acpi kexts a lot of Dell Users have too from their SL installs.

Installer DMG is good, as I first started out with a bad one that after installing would leave me stuck with a useless install that would get stuck at first time run wizard where you would pick country and keyboard language, then would just stay stuck there never moving onto networking but got around that with a little green demon's assistance. So that shouldn't be the issue.

Any idea's or concepts or theories at all would be wicked awesome, and appreciated. Any further info needed, just let me know! :)


org.chameleon.boot.plist Contents from /E/E

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string></string>
<key>SMBIOS</key>
<string>/Extra/smbios.plist</string>
<key>DSDT</key>
<string>/Extra/dsdt/dsdt_v2.aml</string>
<key>Timeout</key>
<string>3</string>
<key>Wait</key>
<string>no</string>
<key>Graphics Mode</key>
<string>1280x800x32</string>
<key>SMBIOSdefaults</key>
<string>no</string>
<key>GUI</key>
<string>yes</string>
<key>Legacy Logo</key>
<string>yes</string>
<key>Theme</key>
<string>Default</string>
<key>Quiet Boot</key>
<string>no</string>
<key>Boot Banner</key>
<string>yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>device-properties</key>
<string>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
</dict>
</plist>

smbios.plist Contents from /E/E
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMbiosdate</key>
<string>05/05/09</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MBP51.88Z.007E.B05.0905051508</string>
<key>SMboardmanufacturer</key>
<string>Apple Inc.</string>
<key>SMboardproduct</key>
<string>Mac-F22788C8</string>
<key>SMfamily</key>
<string>MacBook</string>
<key>SMmanufacturer</key>
<string>Apple Inc.</string>
<key>SMmemmanufacturer</key>
<string>Apple Computer Inc.</string>
<key>SMproductname</key>
<string>MacBook3,2</string>
<key>SMserial</key>
<string>xyxyxyxy</string>
<key>SMsystemversion</key>
<string>1.0</string>
</dict>
</plist>


From System Profiler

Intel GMA X3100:

Chipset Model: GMA X3100
Type: GPU
Bus: Built-In
VRAM (Total): 144 MB
Vendor: Intel (0x8086)
Device ID: 0x2a02
Revision ID: 0x000c
ROM Revision: OpenGL Engine activated via EFI String
Displays:
Display:
Resolution: 1280 x 800
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Display Connector:
Status: No Display Connected

Share this post


Link to post
Share on other sites
I'm having random freezings.

*They can happen after hours of booted or just minutes => totally random

*No logs anywhere

*Mouse keeps moving and can be controlled by pad/usb

*SSH remote connection establishes perfect, can execute TOP command and everything seems keep working normally.

 

I'm confident this is a problem with GMA x3100 144mb 0x2a02.

My notebook is a Gateway M-series (m-6880):

 

 

 

It's a Gateway M-6880 Laptop:

 

CENTRINO SANTA ROSA Platform

CPU: Intel Core 2 Duo T7500 2.2 GHz

RAM: DDR2 4GB 667 MHz

Chipset: Intel Crestline GM965 Rev. 03/C0

Intel 82801HBM (ICH8-DO) Rev. F4

BIOS: Phoenix Technologies Version: 95.10 (i think it's the latest)

Graphics: Intel GMA X3100

Audio: Sigmatel STAC9205X

LAN: Realtek RTL8139/810x

WLAN: Broadcom BCM4311 (Original was an Intel 4965 AGN, incompatible)

DVD-R/RW: Optiarc AD-7563A

HDD: WD3200BEVT-22ZCT0

WEBCAM: Chicony USB 2.0 vendorID 04f2 productID b027

FINGERPRINT SENSOR: UPEK Touchstrip vendorID 147e productID 2016

 

Hi d23,

 

I have the very same problem as you are.

 

My CPU is the same with GMA X3100 (2a02) - Rev 03.

 

Yes I can still hear sound (iTunes playing) when the graphic is freeze (mouse cursor still function).

SSH to the machine still works perfectly...

 

And most of it not error log that related to this graphic stuff...

 

It's usually it's happen when I'm using application or the Mac OS X function that have the need of using the

graphic function. Such as Photoshop, Playing Games, and some random events with the OS it self.

 

Right now on Lion, I was trying to make it more stable by avoiding any extensive use of graph function,

like using tools to turn off any animation (TinkerTool app / Cocktail app will do), turning off the window shadow (ShadowKiller app - I have this run on as Login item).

 

Oh ya the mouse lag problem solve by the solution given in this thread post.

 

 

I have this random graphic related freeze since Leopard (10.5.*), then Snow Leopard (10.6.*) (more stable though, less often to freeze) and now with Lion (10.7.0 - the update for 10.7.1 didn't issue any graphic function update)...

 

This is irritating bug with the graphics ;)

 

So, do you (or anyone) happen to know a solution of this (random freeze) until now?

Share this post


Link to post
Share on other sites
guys, you are awesome!

I was with this crazy mouse problem, and you solved it! Thanks!

 

Hi, gbuzogany

 

would u tell which is ur way to get the problem solved ... for help may be u can tell us, wat bootloader, which kext, and

and wat metode ur goal is...

 

nb: sorry for my bad english.

 

-mrcjr-

Dell Inspiron 1410

- x3100 -id 0x2a02 -ver 0x000c

- chameleon rc5 r752 (it's like hackboot ver1)

Share this post


Link to post
Share on other sites

I have tried everything I can read on my T61 and the one thing I just noticed is that the ones with

Revision ID: 0x000c

 

are the ones not working.

 

any thoughts on this?

Share this post


Link to post
Share on other sites

I just tested my method by playing uberstrike hd.

 

I installed lion retail. Updated to 10.7.2. In [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url], chose 32 bit graphicsenabler=no for boot settings. It worked for me, so i may work for you guys too!

Share this post


Link to post
Share on other sites

I will give that a shot!

 

 

I just tested my method by playing uberstrike hd.

 

I installed lion retail. Updated to 10.7.2. In [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url], chose 32 bit graphicsenabler=no for boot settings. It worked for me, so i may work for you guys too!

Share this post


Link to post
Share on other sites

I still do not have full QE/CI. (No transparent menu bar and launch pad/mission control is laggy)

 

I have the 2a02 Rev C (NOT REV 3). Was anyone able to get Rev C to work?

Share this post


Link to post
Share on other sites

Finally!!!

 

Modified gma965/x3100 driver (32bit ONLY) for lion is worked 100% QE/CI and "NO MOUSE LAG/JUMPING CURSOR"

 

default lion gma965 driver is full QE/CI but has mouse lag/cursor FREEZE and JUMPING, on my laptop

 

but finally i found the right patched driver (only 1 file) at

http://www.kexts.com/downloads.php?do=file&id=1559

and use gma kext file (only 1 gma kext) and replace in S/L/E

 

or download single file AppleIntelGMAX3100FB.kext (150KB) here (its same file)

http://www.mediafire.com/?28i3vdq86off90n

 

 

 

 

GoodBye mouse lag :D

 

hi, d23, you can try this gma x3100kext,,, just 1 file to be replaced into original Lion GMA x3100 kext :D

 

Hi, I know this post is very old but I've face this problem on my laptop, my graphic is x3100 too, at this time, my laptop run 10.7.5 and no Graphics kext enable, default resolution is 1024/... too bad :( So can I use the AppleIntelGMAX3100FB.kext of yours and install to my laptop? Do I need start with 32bit? Thank in advance :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.



×