terranova2142 Posted January 29, 2011 Share Posted January 29, 2011 Sorry For My English Bad My graphics card ati radeon hd 5450 working on snow leopard after installed 10.6.6. And how do make them work Only For Kernel Vanilla Waring Backup Your Data 1.Download the all_in_one.rar(down) 2.Install ATI Chameleon bootloader for Radeon HD5000 or kabyl boot 3.The ROM image under /Extra should be named <vendorid>_<deviceid>.rom(ATI 5450 is 1002_68f9.rom) 4.Install Atiframebuffer.kext and ATY_init.kext to S/L/E (ATI5000Controller don’t need) 5.Edit com.apple.boot.plist <key>Kernel Flags</key> <string>arch=i386</string <key>GraphicsEnabler</key> <string>Yes</string> <key>UseAtiROM</key> <string>Yes</string> <key>AtiFb</key> <string>Hoolock</string> <key>Graphics Mode</key> <string>Your Resolutions </string> ATI 5450 tested Fb working on Uakari,Vervet,Hoolock and other untested.Recommend Hoolock. 6.Install update 10.6.4 reboot and install graphic update 1.0 (if you get kernel panic after installed graphic update 1.0,try boot –x to safe mode and remove all ATIRadeonX3000.kext,I use hfs+ for windows to remove it )(the graphic update 1.0 only for 10.6.4) 7.Open OSX86Tool repair permissons. 8.Install Update 10.6.6 will add ATIRadeonX3000.kext,ATI5000Controller.kext After reboot will it work,you need to do step by step,If you get any error tell me. link download All_in_one.zip http://supportdownload.apple.com/download....csUpdate1.0.dmg ATI 5450 is 68f9 ATY_init.kext not support 5450 so it will display the 5500 QE CI it work All_in_one.zip Quote Link to comment Share on other sites More sharing options...
james21 Posted January 29, 2011 Share Posted January 29, 2011 Any chance this would work similarly for the ATI mobility Radeon 4650? Quote Link to comment Share on other sites More sharing options...
Edward J Posted January 30, 2011 Share Posted January 30, 2011 Update: Apparently I'm a dumbass. Just follow the instructions, mmmkay? There is apparently a graphics update 1.0 floating around the internet that anyone can find. Silly Me. Found it and all is well.... Hey thanks so much for posting this info.... quick question though... on step 5 after installing update 10.6.4 and then you say to install "Graphics Update 1.0". Where is this found? Is it a file/package or something I download via Software Update? I am stuck on that step in between 10.6.4 and 10.6.6, Software Update wants to take me to 10.6.6 but I don't got the graphics update yet.... Sorry For My English Bad My graphics card ati radeon hd 5450 working on snow leopard after installed 10.6.6. And how do make them work Waring Backup Your Data 1.Install ATI Chameleon bootloader for Radeon HD5000 2.The ROM image under /Extra should be named <vendorid>_<deviceid>.rom(ATI 5450 is 1002_68f9.rom) 3.Install Atiframebuffer.kext and ATY_init.kext(ATI5000Controller don’t need) 4.Edit com.apple.boot.plist <key>Kernel Flags</key> <string>arch=i386</string <key>GraphicsEnabler</key> <string>Yes</string> <key>UseAtiROM</key> <string>Yes</string> <key>AtiFb</key> <string>Uakari</string> <key>Graphics Mode</key> <string>1400x1024x32</string> ATI 5450 tested Fb working on Uakari,Vervet,Hoolock and other untested 5.Install update 10.6.4 reboot and install graphic update 1.0 (if you get kernel panic after installed graphic update 1.0,try boot –x to safe mode and remove all ATIRadeonX3000.kext,I use hfs+ for windows to remove it ) 6.Open OSX86Tool repair permissons. 7.Install Update 10.6.6 will add ATIRadeonX3000.kext,ATI5000Controller.kext After reboot will it work,you need to do step by step,If you get any error tell me. link download All_in_one.zip ATI 5450 is 68f9 Apply For All ATI 5000 Series,you need to make own rom and other frambuffer. Good Luck!!! Quote Link to comment Share on other sites More sharing options...
Edward J Posted January 30, 2011 Share Posted January 30, 2011 I think this is it... http://support.apple.com/downloads/DL1083/...csUpdate1.0.dmg Quote Link to comment Share on other sites More sharing options...
Pechorin Posted January 31, 2011 Share Posted January 31, 2011 2.The ROM image under /Extra should be named <vendorid>_<deviceid>.rom(ATI 5450 is 1002_68f9.rom)[/size] Sorry for the stupid question what to do with the file 1002_68f9.rom??? put it in a folder macintosh HD / Extra? Is that all? Quote Link to comment Share on other sites More sharing options...
terranova2142 Posted January 31, 2011 Author Share Posted January 31, 2011 Sorry for the stupid questionwhat to do with the file 1002_68f9.rom??? put it in a folder macintosh HD / Extra? Is that all? yes put in Macintosh HD / Extra Quote Link to comment Share on other sites More sharing options...
Edward J Posted January 31, 2011 Share Posted January 31, 2011 yes put in Macintosh HD / Extra Thank you SOOO Much you have NO IDEA how effing happy I am jumping up and down to have this working LOL you really made my day. Take a day off, you deserve it, bro :-) (or keep helping us ) Quote Link to comment Share on other sites More sharing options...
terranova2142 Posted January 31, 2011 Author Share Posted January 31, 2011 Thank you SOOO Much you have NO IDEA how effing happy I am jumping up and down to have this working LOL you really made my day. Take a day off, you deserve it, bro :-) (or keep helping us ) So what's your card and it work? Quote Link to comment Share on other sites More sharing options...
humm3r Posted January 31, 2011 Share Posted January 31, 2011 I have a 5450 and 5770 at home that I'd like to make work for OSX. Does this give you HDMI audio as well? Quote Link to comment Share on other sites More sharing options...
ximochimo Posted January 31, 2011 Share Posted January 31, 2011 HI: I have an ATI Sapphire HD5450, but I don´t understand steps 1-4... sorry, it's my first Hackintosh... and I don't speak english quiet good Thanks Quote Link to comment Share on other sites More sharing options...
terranova2142 Posted February 1, 2011 Author Share Posted February 1, 2011 I have a 5450 and 5770 at home that I'd like to make work for OSX. Does this give you HDMI audio as well? My monitor not supported HDMI and I not have cable HDMI,if your card working plss report the photo for me I want see Quote Link to comment Share on other sites More sharing options...
ximochimo Posted February 2, 2011 Share Posted February 2, 2011 Hi: I have an ATI Sapphire HD5450, and I'm trying your instructions... but I'm doing something wrong... I think I'm not understanding step 2... what it means? Thanks a lot and sorry for my english Quote Link to comment Share on other sites More sharing options...
terranova2142 Posted February 3, 2011 Author Share Posted February 3, 2011 Hi: I have an ATI Sapphire HD5450, and I'm trying your instructions... but I'm doing something wrong... I think I'm not understanding step 2... what it means? Thanks a lot and sorry for my english you must download the rom in all_in_one.rar extra rom and put in Macintosh HD / In forder extra Quote Link to comment Share on other sites More sharing options...
alicious Posted February 6, 2011 Share Posted February 6, 2011 sorry for the rather noobish question but for step 3, you do mean to just copy them to the /System/Library/Extensions folder, correct? i'm trying to follow these instructions to the letter and don't want to mess it up. thanks Quote Link to comment Share on other sites More sharing options...
angang Posted February 7, 2011 Share Posted February 7, 2011 sorry for the rather noobish question but for step 3, you do mean to just copy them to the /System/Library/Extensions folder, correct? i'm trying to follow these instructions to the letter and don't want to mess it up. thanks "extra" folder is created by Chameleon... in your HD root folder/extra. Quote Link to comment Share on other sites More sharing options...
alicious Posted February 7, 2011 Share Posted February 7, 2011 "extra" folder is created by Chameleon... in your HD root folder/extra. Okay, thanks. I wasn't sure seeing how he didn't say to move those files there but to just 3.Install Atiframebuffer.kext and ATY_init.kext So I kinda read that as in it had to be actually installed in the folder I mentioned somehow, but copying it over is simple enough. Thanks again. Quote Link to comment Share on other sites More sharing options...
Vorkey Posted February 8, 2011 Share Posted February 8, 2011 Thanks! Been looking for something to get ATI Radeon 5450 working. I'm going to try it out. Quote Link to comment Share on other sites More sharing options...
DeMoOL Posted February 8, 2011 Share Posted February 8, 2011 Thanks white_apple_x86 for your work! very nice from spain! thanks! capture Quote Link to comment Share on other sites More sharing options...
Vorkey Posted February 9, 2011 Share Posted February 9, 2011 Well it worked but I think I did something wrong because I don't have any other resolutions apart from the one I added to the boot.plist Also, its a bit sluggish. And my vram appears as 256 instead of 512 Quote Link to comment Share on other sites More sharing options...
Pechorin Posted February 14, 2011 Share Posted February 14, 2011 Well it worked but I think I did something wrong because I don't have any other resolutions apart from the one I added to the boot.plist Also, its a bit sluggish. And my vram appears as 256 instead of 512 i have same problem... In fact, card appears immediately after the installation clear system, without [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], and then all these manipulations do not give any results ... Quote Link to comment Share on other sites More sharing options...
rubenmr Posted February 18, 2011 Share Posted February 18, 2011 Im trying it but i cant. My PC: AMD Athlon X2, 3GB RAM, ATI HD5450 on PCIex. I installed SnowLeopard Retail with EFI Empire. I have chocolate kernel & Chameleon RC5. I do all steps (install hd500, copy rom, kexts, 10.6.4 update, graphics update...). After install graphics update, reboot -v shows "Device in slot: SLOT-1" but osx doesnt load. My boot.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Kernel</key> <string>chocolate_kernel</string> <key>Kernel Flags</key> <string>arch=i386</string> <key>GUI</key> <string>No</string> <key>Timeout</key> <string>5</string> <key>UseAtiROM</key> <string>Yes</string> <key>AtiFb</key> <string>Vervet</string> <key>Graphics Mode</key> <string>1360x768x32</string> <key>GraphicsEnabler</key> <string>Yes</string> </dict> </plist> Please help me!!!! Quote Link to comment Share on other sites More sharing options...
yukistvn Posted February 18, 2011 Share Posted February 18, 2011 hi white_apple_x86, i done at step 5, updated to 10.6.4, but after reboot - computer boot at chameleon : is ok - when i chose boo MAC SNOW, it seem working, but the start up login screen like a "white tearing screen", i cannot loggin do u have any idea to help me? if not, is it the other way to get Snow back without reinstall everythings hope you reply soon! thanks in advance! Quote Link to comment Share on other sites More sharing options...
terranova2142 Posted February 19, 2011 Author Share Posted February 19, 2011 Im trying it but i cant. My PC: AMD Athlon X2, 3GB RAM, ATI HD5450 on PCIex. I installed SnowLeopard Retail with EFI Empire. I have chocolate kernel & Chameleon RC5. I do all steps (install hd500, copy rom, kexts, 10.6.4 update, graphics update...). After install graphics update, reboot -v shows "Device in slot: SLOT-1" but osx doesnt load. My boot.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Kernel</key> <string>chocolate_kernel</string> <key>Kernel Flags</key> <string>arch=i386</string> <key>GUI</key> <string>No</string> <key>Timeout</key> <string>5</string> <key>UseAtiROM</key> <string>Yes</string> <key>AtiFb</key> <string>Vervet</string> <key>Graphics Mode</key> <string>1360x768x32</string> <key>GraphicsEnabler</key> <string>Yes</string> </dict> </plist> Please help me!!!! Reinstall Atiframbuffer and aty_init.kext,AtiFb=Hoolock,try download ati5000injector.kext put in extra Quote Link to comment Share on other sites More sharing options...
terranova2142 Posted February 19, 2011 Author Share Posted February 19, 2011 hi white_apple_x86,i done at step 5, updated to 10.6.4, but after reboot - computer boot at chameleon : is ok - when i chose boo MAC SNOW, it seem working, but the start up login screen like a "white tearing screen", i cannot loggin do u have any idea to help me? if not, is it the other way to get Snow back without reinstall everythings hope you reply soon! thanks in advance! try -x to safe mode,remove ati5000controler.kext,atix3000 if it is there Quote Link to comment Share on other sites More sharing options...
yukistvn Posted February 20, 2011 Share Posted February 20, 2011 Sorry For My English BadMy graphics card ati radeon hd 5450 working on snow leopard after installed 10.6.6. And how do make them work Only For Kernel Vanilla Waring Backup Your Data 1.Install ATI Chameleon bootloader for Radeon HD5000 2.The ROM image under /Extra should be named <vendorid>_<deviceid>.rom(ATI 5450 is 1002_68f9.rom) 3.Install Atiframebuffer.kext and ATY_init.kext(ATI5000Controller don’t need) 4.Edit com.apple.boot.plist <key>Kernel Flags</key> <string>arch=i386</string <key>GraphicsEnabler</key> <string>Yes</string> <key>UseAtiROM</key> <string>Yes</string> <key>AtiFb</key> <string>Hoolock</string> <key>Graphics Mode</key> <string>1400x1024x32</string> ATI 5450 tested Fb working on Uakari,Vervet,Hoolock and other untested.Recommend Hoolock. 5.Install update 10.6.4 reboot and install graphic update 1.0 (if you get kernel panic after installed graphic update 1.0,try boot –x to safe mode and remove all ATIRadeonX3000.kext,I use hfs+ for windows to remove it )(the graphic update 1.0 only for 10.6.4) 6.Open OSX86Tool repair permissons. 7.Install Update 10.6.6 will add ATIRadeonX3000.kext,ATI5000Controller.kext After reboot will it work,you need to do step by step,If you get any error tell me. link download All_in_one.zip http://supportdownload.apple.com/download....csUpdate1.0.dmg ATI 5450 is 68f9 ATY_init.kext not support 5450 so it will display the 5500 Apply For All ATI 5000 Series,you need to make own rom and other frambuffer. Good Luck!!! hi white_apple_x86, i have not read carefully your condition when apply your guide, sorry my noob question here: i dont understand about "only for kernel Vanilla", this kernell how to identify in my OS , in my com.apple.boot.plist i found line say " mach kernel" is that enough to apply your guide ? thanks your reply your last reply is till have problem! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.