Jump to content

Ajuda, mac levando um seculo para Iniciar


A Williams
 Share

11 posts in this topic

Recommended Posts

Preciso de ajuda, meu macbook air esta levando muito tempo para iniciar, a keyboard e mouse pad nao estao funcionando, estou usando uma keyboard via usb.

Alguns meses atras devido a liquido que caiu no laptop, a logic foi arrumada e estava funcionando bem, mas tive problema com as hinges, dobradicas e levei na loja da aple, la eles viram que tinha havido um contato com liquido e trocaram praticamente tudo, inclusive a logic board.

Nas primeiras semanas aconteceu um kernel panic e umas semans depois outro.

Ja tem uns 5 meses e umas semanas atras o laptop comecou a congelar e soh dando um boot para iniciar novamente, mas depois disso demora um seculo para iniciar, a keyboard e mouse pad congela e aparece a beach ball. Estou usando ele com um teclado conectado na USB e o mouse conectado ao teclado. :D

 

Console log

 

Oct 22 09:16:32 localhost kernel[0]:

Oct 22 09:16:32 localhost kernel[0]:

Oct 22 09:16:18 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***

Oct 22 09:16:39 localhost kernel[0]:

Oct 22 09:26:02: --- last message repeated 13 times ---

Oct 22 09:17:29 localhost bootlog[38]: BOOT_TIME: 1287753377 0

Oct 22 09:17:37 localhost kernel[0]:

Oct 22 09:27:27: --- last message repeated 5 times ---

Oct 22 09:18:02 localhost kernel[0]:

Oct 22 09:28:57: --- last message repeated 7 times ---

Oct 22 09:18:32 localhost kernel[0]:

Oct 22 09:29:57: --- last message repeated 19 times ---

Oct 22 09:19:48 localhost kernel[0]:

Oct 22 09:30:20: --- last message repeated 21 times ---

Oct 22 09:21:04 localhost blued[39]: Apple Bluetooth daemon started

Oct 22 09:21:11 localhost kernel[0]:

Oct 22 09:30:58: --- last message repeated 65 times ---

Oct 22 09:25:21 localhost kernel[0]:

Oct 22 09:32:34: --- last message repeated 3 times ---

Oct 22 09:25:29 localhost mDNSResponder[26]: mDNSResponder mDNSResponder-214.3.2 (May 14 2010 15:29:49) starting

Oct 22 09:25:36 localhost kernel[0]:

Oct 22 09:32:34: --- last message repeated 1 time ---

Oct 22 09:25:37 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[27]: Login Window Application Started

Oct 22 09:25:44 localhost kernel[0]:

Oct 22 09:32:34: --- last message repeated 5 times ---

Oct 22 09:26:00 localhost configd[13]: bootp_session_transmit: bpf_write(en0) failed: Network is down (50)

Oct 22 09:26:00 localhost configd[13]: DHCP en0: INIT-REBOOT transmit failed

Oct 22 09:26:00 localhost configd[13]: InterfaceNamer: timed out waiting for IOKit to quiesce

Oct 22 09:26:00 localhost configd[13]: InterfaceNamer: Busy services :

Oct 22 09:26:00 localhost configd[13]: InterfaceNamer: MacBookAir1,1 [1]

Oct 22 09:26:00 localhost configd[13]: InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert [1]

Oct 22 09:26:00 localhost configd[13]: InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0 [1]

Oct 22 09:26:00 localhost configd[13]: InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI [2]

Oct 22 09:26:00 localhost configd[13]: InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/MCHC@0 [1]

Oct 22 09:26:00 localhost configd[13]: InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/GFX0@2 [1]

Oct 22 09:26:00 localhost configd[13]: InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/GFX0@2/AppleIntelGMAX3100FB [1]

Oct 22 09:26:00 localhost configd[13]: InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/GFX0@2/AppleIntelGMAX3100FB/gpu-sensor [1]

Oct 22 09:26:00 localhost com.apple.usbmuxd[19]: usbmuxd-201 built for iTunesTen on Aug 12 2010 at 17:33:03, running 64 bit

Oct 22 09:26:02 localhost configd[13]: network configuration changed.

Oct 22 09:26:09 localhost kernel[0]:

Oct 22 09:33:11: --- last message repeated 5 times ---

Oct 22 09:26:32 localhost kernel[0]:

Oct 22 09:33:49: --- last message repeated 1 time ---

Oct 22 09:26:32 localhost configd[13]: network configuration changed.

Oct 22 09:26:40 localhost kernel[0]:

Oct 22 09:33:49: --- last message repeated 1 time ---

Oct 22 09:26:40 localhost mDNSResponder[26]: Adding registration domain analiawilliams.members.mac.com.

Oct 22 09:26:48 localhost kernel[0]:

Oct 22 09:33:49: --- last message repeated 3 times ---

Oct 22 09:26:56 localhost root[63]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000

Oct 22 09:26:56 localhost root[63]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.apple.com

Oct 22 09:26:56 localhost root[63]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known

Oct 22 09:27:19 localhost configd[13]: network configuration changed.

Oct 22 09:27:27 localhost kernel[0]:

Oct 22 09:34:22: --- last message repeated 53 times ---

Oct 22 09:30:27 localhost kernel[0]:

Oct 22 09:35:30: --- last message repeated 1 time ---

Oct 22 09:30:35 localhost configd[13]: network configuration changed.

Oct 22 09:30:58 localhost kernel[0]:

Oct 22 09:35:31: --- last message repeated 13 times ---

Oct 22 09:31:23 localhost ntpd[17]: time reset -1.832334 s

Oct 22 09:31:26 localhost kernel[0]:

Oct 22 09:36:34: --- last message repeated 39 times ---

Oct 22 09:34:22 localhost kernel[0]:

Oct 22 09:36:40: --- last message repeated 39 times ---

Oct 22 09:36:40 localhost loginwindow[27]: Login Window Started Security Agent

Oct 22 09:36:42 localhost loginwindow[27]: Login Window - Returned from Security Agent

Oct 22 09:36:42 localhost loginwindow[27]: USER_PROCESS: 27 console

Oct 22 09:36:43 localhost com.apple.launchd.peruser.501[91] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self

Oct 22 09:37:03 localhost kernel[0]:

Oct 22 09:37:24: --- last message repeated 7 times ---

Oct 22 09:37:24 localhost com.apple.launchd.peruser.501[91] (com.apple.Kerberos.renew.plist[106]): Exited with exit code: 1

Oct 22 09:37:31 localhost WindowServer[62]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

Oct 22 09:37:31 localhost com.apple.WindowServer[62]: Fri Oct 22 09:37:31 localhost WindowServer[62] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

Oct 22 09:37:56 localhost mds[25]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"

 

Rodei o Smart Utility e e esse eh o report :

location: /dev/disk0

partition count: 1

partitions: Macintosh HD,

SMART Support: Supported

Last SMART Error: *not set*

Model Family: *not set*

Model: SAMSUNG HS082HB

Serial Number: S1BPJQSZ207726

Firmware Version: NL101-06

Capacity: 80,026,361,856 bytes

ATA Version: 6

ATA Standard: ATA/ATAPI-6 T13 1410D revision 1

Health: Failing

Overall Health: PASSED

Offline Data Status: 0

Self Test Status: 0

Offline Data Collection Time: 0

Data Collection Capabilities: 59

SMART Capabilities: 3

Error Logging Capabilities: 1

Short Self Test Time: 2

Long Self Test Time: 46

Conveyance Self Test Time: 0

Attribute Log Revision: 4

Attribute Count: 24

Attributes:

ID# ATTRIBUTE NAME FLAG VALUE WORST THRESH TYPE UPDATED FAILED RAW VALUE

1 Raw Read Error Rate 0x000F 100 099 051 Pre-fail Always Never 214927

3 Spin Up Time 0x0007 096 094 000 Pre-fail Always Never 1657

4 Start/Stop Count 0x0032 097 097 000 Old age Always Never 3537

5 Reallocated Sector Count 0x0033 091 091 010 Pre-fail Always Never 61

7 Seek Error Rate 0x000E 252 252 000 Old age Always Never 1

8 Seek Time Performance 0x0024 252 252 000 Old age Offline Never 0

9 Power On Hours 0x0032 100 100 000 Old age Always Never 1614

10 Spin Retry Count 0x0032 252 252 000 Old age Always Never 0

12 Power Cycle Count 0x0032 100 100 000 Old age Always Never 783

191 G-Sense Error Rate 0x0032 096 096 000 Old age Always Never 45396

192 Power Off Retract Count 0x0032 099 099 000 Old age Always Never 1020

194 Temperature Celsius 0x0022 136 112 000 Old age Always Never 34 (Lifetime Min/Max 19/42)

195 Hardware ECC Recovered 0x001A 100 100 000 Old age Always Never 2390727728

196 Reallocated Event Count 0x0032 091 091 000 Old age Always Never 61

197 Current Pending Sector Count 0x0012 092 092 000 Old age Always Never 53

198 Offline Uncorrectable Sector Count 0x0030 252 252 000 Old age Offline Never 0

199 UDMA CRC Error Count 0x0036 200 200 000 Old age Always Never 0

200 Multi Zone Error Rate 0x000A 099 099 000 Old age Always Never 461

201 Soft Read Error Rate 0x0032 252 252 000 Old age Always Never 0

223 Load Retry Count 0x0032 100 100 000 Old age Always Never 143

225 Load Cycle Count 0x0032 095 095 000 Old age Always Never 53422

255 Unknown Attribute 0x000A 252 252 000 --- Old age -216901

255 Unknown Attribute 0x0000 000 000 000 <== Data 0

254 Free_Fall_Sensor 0x0000 000 000 000 <== Threshold 0

Error Log Version: 1

Error Count: 65535

Error Log:

Error 65535 occured at disk power-on lifetime: 0 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 18 88 4C 06 40

Error: Uncorrectable Error with 24 sectors at LBA = 0

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

C8 00 08 98 68 A8 44 00 00:21:10.239 READ DMA

C8 00 08 98 68 A8 44 00 00:21:08.756 READ DMA

C8 00 08 98 68 A8 44 00 00:21:07.274 READ DMA

C8 00 08 98 68 A8 44 00 00:21:05.791 READ DMA

C8 00 08 98 68 A8 44 00 00:21:04.311 READ DMA

 

Error 65534 occured at disk power-on lifetime: 0 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 18 88 4C 06 40

Error: Uncorrectable Error with 24 sectors at LBA = 0

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

C8 00 08 98 68 A8 44 00 00:21:08.756 READ DMA

C8 00 08 98 68 A8 44 00 00:21:07.274 READ DMA

C8 00 08 98 68 A8 44 00 00:21:05.791 READ DMA

C8 00 08 98 68 A8 44 00 00:21:04.311 READ DMA

C8 00 60 E0 20 4C 45 00 00:21:04.286 READ DMA

 

Error 65533 occured at disk power-on lifetime: 0 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 18 88 4C 06 40

Error: Uncorrectable Error with 24 sectors at LBA = 0

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

C8 00 08 98 68 A8 44 00 00:21:07.274 READ DMA

C8 00 08 98 68 A8 44 00 00:21:05.791 READ DMA

C8 00 08 98 68 A8 44 00 00:21:04.311 READ DMA

C8 00 60 E0 20 4C 45 00 00:21:04.286 READ DMA

CA 00 10 D8 FB 0D 40 00 00:21:04.277 WRITE DMA

 

Error 65532 occured at disk power-on lifetime: 0 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 76 2A 40 06 40

Error: Uncorrectable Error with 118 sectors at LBA = 0

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

C8 00 08 98 68 A8 44 00 00:21:05.791 READ DMA

C8 00 08 98 68 A8 44 00 00:21:04.311 READ DMA

C8 00 60 E0 20 4C 45 00 00:21:04.286 READ DMA

CA 00 10 D8 FB 0D 40 00 00:21:04.277 WRITE DMA

CA 00 10 F8 FD 0A 40 00 00:21:04.276 WRITE DMA

 

Error 65531 occured at disk power-on lifetime: 0 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 76 2A 40 06 40

Error: Uncorrectable Error with 118 sectors at LBA = 0

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

C8 00 08 98 68 A8 44 00 00:21:04.311 READ DMA

C8 00 60 E0 20 4C 45 00 00:21:04.286 READ DMA

CA 00 10 D8 FB 0D 40 00 00:21:04.277 WRITE DMA

CA 00 10 F8 FD 0A 40 00 00:21:04.276 WRITE DMA

CA 00 10 48 F2 0A 40 00 00:21:04.276 WRITE DMA

 

Self Test Log Revision: 1

Self Test Log Count: 0

Self Test Log:

 

No self tests logged.

 

Qualquer ajuda eh bemvinda ;) , so preciso saber se tem algo que possa ser feito ou eh um problema de hardware.

Link to comment
Share on other sites

Seu disco rígido é corrupto, isso pode causar os congelamentos.

 

Boot com seu Apple DVD de instalação (você tem que segurar alguma tecla durante o boot para inicializar a partir do DVD, não me lembro qual) e usar o Disk Utility para reparar o disco.

 

Se isso não rola, procura Disk Warrior.

Link to comment
Share on other sites

Seu disco rígido é corrupto, isso pode causar os congelamentos.

 

Boot com seu Apple DVD de instalação (você tem que segurar alguma tecla durante o boot para inicializar a partir do DVD, não me lembro qual) e usar o Disk Utility para reparar o disco.

 

Se isso não rola, procura Disk Warrior.

 

Esse sera um problema, porque vou ter que conseguir um super drive, entao deve instalar o disco original mais os updates e depois o Snow Leopard?

 

Esse sera um problema, porque vou ter que conseguir um super drive, entao deve instalar o disco original mais os updates e depois o Snow Leopard?

 

Desculpe, my bad, eu entendo que o snow leopard eh uma nova versao do mac os, entao eu vou tentar reinstalar pq tenho em um scandisk e tentarei via usb. Acredito que nao faca nenhuma diferenca, certo?

Link to comment
Share on other sites

Esse sera um problema, porque vou ter que conseguir um super drive

ahh certo, o MacBook Air não tenho drive DVD..

 

pq tenho em um scandisk e tentarei via usb.

 

?? Não entendi nada - 1: Scandisk e coisa do Windows 98. 2: Tentarei o que via USB?

 

Se vôce ja tem um DVD de instalaçao "restaurado" numa flash drive USB, faz boot com ele e use Apple Disk Utility para reparar o disco rigido.

 

Ou, vai para o Apple Center mais proxima e mandar eles ligar um drive externo no seu MacBook e fazer mesma coisa.

 

Eu achei engraçado, com um Hackintosh, tudo isso seria muito mais facil..

Link to comment
Share on other sites

ahh certo, o MacBook Air não tenho drive DVD..

 

 

 

?? Não entendi nada - 1: Scandisk e coisa do Windows 98. 2: Tentarei o que via USB?

 

Se vôce ja tem um DVD de instalaçao "restaurado" numa flash drive USB, faz boot com ele e use Apple Disk Utility para reparar o disco rigido.

 

Ou, vai para o Apple Center mais proxima e mandar eles ligar um drive externo no seu MacBook e fazer mesma coisa.

 

Eu achei engraçado, com um Hackintosh, tudo isso seria muito mais facil..

 

Mispelled queria dizer SanDisk, flash drive, obrigada

Link to comment
Share on other sites

Boot com seu Apple DVD de instalação (você tem que segurar alguma tecla durante o boot para inicializar a partir do DVD) e usar o Disk Utility para reparar o disco.

Se isso não rola, procura Disk Warrior.

 

pressionando a tecla "c"

 

Vc pode tentar pelo single user

pressione command + s

espere o #root e digite

fsck -fy

 

ou

 

usar um gravador de DVD usb

 

pelo DVD de instalação certamente deve resolver o problema, pelo single user já tive algumas decepções, mas não custa tentar

 

Redefina as memórias PRAM e NVRAM tb

segure as teclas command + option + p + r

Link to comment
Share on other sites

pressionando a tecla "c"

 

Vc pode tentar pelo single user

pressione command + s

espere o #root e digite

fsck -fy

 

ou

 

usar um gravador de DVD usb

 

pelo DVD de instalação certamente deve resolver o problema, pelo single user já tive algumas decepções, mas não custa tentar

 

Redefina as memórias PRAM e NVRAM tb

segure as teclas command + option + p + r

 

ok,

 

Eu acho que eu ja tentei quase de tudo nesses dias para resolver esse problema, de qualquer forma eu tentei reinstalar o Snow Leopard via usb usando um flash drive conectado a um teclado DELL, ja que o keyboard e mouse pad do MBA congelou, segurei a tecla C e ficou toda uma noite e nunca iniciou, entao dei um cold boot e tentei com o flash drive anexo a USB do MBA e nada aconteceu, o Mac reiniciou, mas nao abriu o menu de instalacao .

Entao eu segui a sugestao do Grindo Vermelho e tentei o disk Warrior :

 

10/27/10 7:15:45 AM com.apple.launchd.peruser.501[93] (com.apple.Kerberos.renew.plist[108]) Exited with exit code: 1

10/27/10 7:15:47 AM WindowServer[59] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

10/27/10 7:15:47 AM com.apple.WindowServer[59] Wed Oct 27 07:15:47 localhost WindowServer[59] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

10/27/10 7:16:14 AM [0x0-0xa00a].com.alsoft.diskwarriorstarter DiskWarriorDaemon: Wed Oct 27 07:16:14 EDT 2010. Running scheduled hardware tests.

10/27/10 7:16:21 AM [0x0-0xa00a].com.alsoft.diskwarriorstarter DiskWarriorDaemon: [Wed Oct 27 07:16:14 EDT 2010] : ATA device 'SAMSUNG HS082HB', serial number '', reports it is functioning normally.

10/27/10 7:16:21 AM [0x0-0xa00a].com.alsoft.diskwarriorstarter DiskWarriorDaemon: [Wed Oct 27 07:16:14 EDT 2010] : ATA device 'SAMSUNG HS082HB', serial number '', reports it is functioning at a temperature of 95.0F (35C) degrees.

10/27/10 7:16:21 AM /Applications/Utilities/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon[126] [Wed Oct 27 07:16:14 EDT 2010] : ATA device 'SAMSUNG HS082HB', serial number '', reports it is functioning at a temperature of 95.0F (35C) degrees.

10/27/10 7:16:21 AM /Applications/Utilities/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon[126] [Wed Oct 27 07:16:14 EDT 2010] : The spare blocks for ATA device 'SAMSUNG HS082HB', serial number '', appear to be exhausted. (Total Available: 10) (Use Attempts: 61)

10/27/10 7:16:21 AM [0x0-0xa00a].com.alsoft.diskwarriorstarter DiskWarriorDaemon: [Wed Oct 27 07:16:14 EDT 2010] : The spare blocks for ATA device 'SAMSUNG HS082HB', serial number '', appear to be exhausted. (Total Available: 10) (Use Attempts: 61)

10/27/10 7:16:21 AM [0x0-0xa00a].com.alsoft.diskwarriorstarter DiskWarriorDaemon: SMART Information...

10/27/10 7:16:21 AM mdworker[74] (Error) SyncInfo: Catalog changed during searchfs too many times -- falling back to fsw search /

10/27/10 7:16:22 AM [0x0-0xa00a].com.alsoft.diskwarriorstarter Device SMART Thresholds [D1]...

10/27/10 7:16:22 AM [0x0-0xa00a].com.alsoft.diskwarriorstarter 0x0000: 04 00 01 33 00 00 00 00 00 00 00 00 00 00 03 00

10/27/10 7:16:22 AM [0x0-0xa00a].com.alsoft.diskwarriorstarter 0x0010: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00

10/27/10 7:16:22 AM [0x0-0xa00a].com.alsoft.diskwarriorstarter 0x0020: 00 00 00 00 00 00 05 0a 00 00 00 00 00 00 00 00

10/27/10 7:16:22 AM [0x0-0xa00a].com.alsoft.diskwarriorstarter 0x0030:

 

Muitos usuarios de MBA reclamam da temperatura, da para ver que a temperatura do meu esta bem acima, parece que o Snow Leopard tambem contribuiu muito para isso. instalei hoje o Coolbookcontroller, mas nao sei se vai funcionar bem com o Snow Leopard, tambem nao penso que ira reparar os erros.

Agora penso que se for um problema de heat, tanto faz se eu trocar a logic board entao, isso vai continuar acontecendo.

Esse MBA eh pequeno, leve, mas da um monte de problemas comparado aos outros macbooks da minha familia.

A minha duvida eh se tem algo a fazer, pq parece que o aquecimento eh um problema conhecido pela apple, mas eles nao vao fazer nada para reparar.

Obrigada pelo esforco de voces em me ajudar.

Link to comment
Share on other sites

Obrigada, ontem eu instalei esse smcfancontrol e nao percebi nenhuma diferenca.

 

Com ele vc pode aumentar a velocidade do cooler, diminuindo a temperatura, só não exagere nos "RPM"

:)

Link to comment
Share on other sites

 Share

×
×
  • Create New...