Jump to content
ErmaC

Chameleon 2.4svn Official PKG Installer

4,320 posts in this topic

Recommended Posts

I installed ML and noticed theres no extra folder installed automatically with the 2035 chameleon so I had to create one myself. Is this how it should be?

 

Also I always thought that GraphicsEnabler= ..... etc was for both Nvidia and AMD video card standards but in the 2030 chameleon it looks like that command is for Nvidia cards only. Is this right and how its meant to be?

Share this post


Link to post
Share on other sites
Advertisement

md is no longer part of OS X from Mountain Lion onwards. You can easily compile the sources from Lion, which are in this tar ball: http://opensource.ap...cmds-147.tar.gz

If you have homebrew:

brew install https://raw.github.com/simonair/homebrew/2acd33a1f1ce1493e5fbe0967c24b4eb5ec6db5c/Library/Formula/md.rb

 

[LD] boot.sys
ld: warning: -segaddr __INIT not 4096 byte aligned
ld: warning: grandfathering in old symbol '__DATA__bss__begin' as alias for 'section$start$__DATA$(bool, short, short)'
ld: warning: grandfathering in old symbol '__DATA__bss__end' as alias for 'section$end$__DATA$(bool, short, short)'
ld: warning: grandfathering in old symbol '__DATA__common__begin' as alias for 'section$start$__DATA$__common'
ld: warning: grandfathering in old symbol '__DATA__common__end' as alias for 'section$end$__DATA$__common'
Undefined symbols for architecture i386:
 "start", referenced from:
    -u command line option
    (maybe you meant: _start_built_in_module, _startprog , dyld_void_start , _symbols_module_start , _start_built_in_modules )
ld: symbol(s) not found for architecture i386
collect2: ld returned 1 exit status
make[3]: *** [boot] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

 

 

md error has gone

but i got this error,

Share this post


Link to post
Share on other sites

Hi!

 

I found some thing. If I use GraphicsEnabler, than I can sing in iCloud.

If I use EFI strings with good NVCAP for my nVidia Quadro 4000 MAC card, than I can't sign in to iCloud.

Conclusion: I sign in with GE, after I replace org.chameleon.Boot.plist with EFI, than I can use iCloud, but I don't unsign, because I need replace org.chameleon.Boot.plist again.

 

Good nvcap settings: 0400000000000300000000000000000700000000

Can you add this in the next chameleon?

Share this post


Link to post
Share on other sites
[LD] boot.sys ld: warning: -segaddr __INIT not 4096 byte aligned ld: warning: grandfathering in old symbol '__DATA__bss__begin' as alias for 'section$start$__DATA$(bool, short, short)' ld: warning: grandfathering in old symbol '__DATA__bss__end' as alias for 'section$end$__DATA$(bool, short, short)' ld: warning: grandfathering in old symbol '__DATA__common__begin' as alias for 'section$start$__DATA$__common' ld: warning: grandfathering in old symbol '__DATA__common__end' as alias for 'section$end$__DATA$__common' Undefined symbols for architecture i386: "start", referenced from: -u command line option (maybe you meant: _start_built_in_module, _startprog , dyld_void_start , _symbols_module_start , _start_built_in_modules ) ld: symbol(s) not found for architecture i386 collect2: ld returned 1 exit status make[3]: *** [boot] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2

md error has gone but i got this error,

I get the same error compiling v2035 with Xcode 4.4.

Share this post


Link to post
Share on other sites
I installed ML and noticed theres no extra folder installed automatically with the 2035 chameleon so I had to create one myself. Is this how it should be?

 

Also I always thought that GraphicsEnabler= ..... etc was for both Nvidia and AMD video card standards but in the 2030 chameleon it looks like that command is for Nvidia cards only. Is this right and how its meant to be?

 

GE=1 Works just for me with r2030. I have a Radeon 5770.

Share this post


Link to post
Share on other sites
Enoch by ErmaC (r2011) [2012-07-12 17:50:00]
cpu freq classic = 0x00000000b2cb9ff0
msr(449): ia32_perf_stat 0x86000922
max: 9 current: 9
CPU: Brand String:			 Intel(R) Core(TM)2 Extreme CPU X9650  @ 3.00GHz
CPU: Vendor/Family/ExtFamily:  0x756e6547/0x6/0x0
CPU: Model/ExtModel/Stepping:  0x17/0x1/0x7
CPU: MaxCoef/CurrCoef:		 0x9/0x9
CPU: MaxDiv/CurrDiv:		   0x0/0x0
CPU: TSCFreq:				  2999MHz
CPU: FSBFreq:				  333MHz
CPU: CPUFreq:				  2999MHz
CPU: NoCores/NoThreads:	    4/4
CPU: Features:				 0x0000025f
Attempting to read GPT
Read GPT
Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B
Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC
Attempting to read GPT
Read GPT
Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B
Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC
Module 'Symbols.dylib' by 'Chameleon' Loaded.
Description: Chameleon symbols for linking
Version: 0
Compat:  0
Module 'Keylayout.dylib' by 'Unknown' Loaded.
Description:
Version: 0
Compat:  0
Module 'klibc.dylib' by 'Unknown' Loaded.
Description:
Version: 0
Compat:  0
Module 'Resolution.dylib' by 'Unknown' Loaded.
Description:
Version: 0
Compat:  0
Buffer location: 0x1000F8CA status: 1
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
getResolution: 2125x65534x32
Buffer location: 0x1000F7EA status: 1
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Module 'uClibcxx.dylib' by 'Unknown' Loaded.
Description:
Version: 0
Compat:  0
Loading Darwin 10.7
Loading kernel /mach_kernel
ACPI Table not found: DSDT.aml
No DSDT found, using 0 as uid value.
Using PCI-Root-UID value: 0
LAN Controller [1969:1026] :: PciRoot(0x0)/Pci(0x1c,0x5)/Pci(0x0,0x0)
Setting up lan keys
Intel P45/G45 DRAM Controller [8086:2e20] at 00:00.0
Frequency detected: 399 MHz (799) Dual Channel
CAS:6 tRC:6 tRP:6 RAS:18 (6-6-6-18)
SMBus CmdReg: 0x3
Scanning SMBus [8086:3a30], mmio: 0xfbfff404, ioport: 0x400, hostc: 0x1
SPD[0] (size): 128 @0x50
Slot: 0 Type 19 2048MB (DDR2 SDRAM) 800MHz Vendor=Kingmax Semiconductor
  PartNo=KLDE88F-B8KY6 SerialNo=00000000
SPD[0] (size): 128 @0x51
Slot: 1 Type 19 2048MB (DDR2 SDRAM) 800MHz Vendor=Kingmax Semiconductor
  PartNo=KLDE88F-B8KW6 SerialNo=00000000
SPD[0] (size): 128 @0x52
Slot: 2 Type 19 2048MB (DDR2 SDRAM) 800MHz Vendor=Kingmax Semiconductor
  PartNo=KLDE88F-B8KY6 SerialNo=00000000
SPD[0] (size): 128 @0x53
Slot: 3 Type 19 2048MB (DDR2 SDRAM) 800MHz Vendor=Kingmax Semiconductor
  PartNo=KLDE88F-B8KW6 SerialNo=00000000
SPD[0] (size): 255 @0x54
SPD[0] (size): 255 @0x55
SPD[0] (size): 255 @0x56
SPD[0] (size): 255 @0x57
CPU is Intel(R) Core(TM)2 Extreme CPU X9650  @ 3.00GHz, family 0x6, model 0x17
Type: 0, Length: 24, Handle: 0x0
BIOSInformation:
vendor: Apple Inc.
version: IM121.88Z.0047.B1F.1201241648
releaseDate: 11/06/2009
Type: 1, Length: 27, Handle: 0x1
SystemInformation:
manufacturer: Apple Inc.
productName: iMac12,1
version: 1.0
serialNumber: C02CFFC7DHJF
uuid: 20AE001E-8C00-0166-9283-0022156A9A35
wakeupReason: 0x6
skuNumber: To Be Filled By O.E.M.
family: iMac
Type: 2, Length: 15, Handle: 0x2
BaseBoard:
manufacturer: Apple Inc.
product: Mac-942B5BF58194151B
version: Rev 1.xx
serialNumber: MS1C87BWZ102694
assetTagNumber: To Be Filled By O.E.M.
locationInChassis: To Be Filled By O.E.M.
boardType: 0xA
Type: 3, Length: 21, Handle: 0x3
SystemEnclosure:
manufacturer: Apple Inc.
type: 3
version:
serialNumber:
assetTagNumber:
Type: 4, Length: 40, Handle: 0x4
ProcessorInformation:
socketDesignation: LGA 775
processorType: 3
processorFamily: 0xC1
manufacturer: Intel
processorID: 0x10677
processorVersion: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
externalClock: 333MHz
maximumClock: 2999MHz
currentClock: 3000MHz
serialNumber: To Be Filled By O.E.M.
assetTag: To Be Filled By O.E.M.
partNumber: To Be Filled By O.E.M.
Type: 7, Length: 19, Handle: 0x5
Type: 7, Length: 19, Handle: 0x6
Type: 7, Length: 19, Handle: 0x7
Type: 5, Length: 24, Handle: 0x8
Type: 6, Length: 12, Handle: 0x9
Type: 6, Length: 12, Handle: 0xa
Type: 6, Length: 12, Handle: 0xb
Type: 6, Length: 12, Handle: 0xc
Type: 8, Length: 9, Handle: 0xd
Type: 8, Length: 9, Handle: 0xe
Type: 8, Length: 9, Handle: 0xf
Type: 8, Length: 9, Handle: 0x10
Type: 8, Length: 9, Handle: 0x11
Type: 8, Length: 9, Handle: 0x12
Type: 8, Length: 9, Handle: 0x13
Type: 8, Length: 9, Handle: 0x14
Type: 8, Length: 9, Handle: 0x15
Type: 8, Length: 9, Handle: 0x16
Type: 8, Length: 9, Handle: 0x17
Type: 8, Length: 9, Handle: 0x18
Type: 8, Length: 9, Handle: 0x19
Type: 8, Length: 9, Handle: 0x1a
Type: 8, Length: 9, Handle: 0x1b
Type: 8, Length: 9, Handle: 0x1c
Type: 8, Length: 9, Handle: 0x1d
Type: 8, Length: 9, Handle: 0x1e
Type: 8, Length: 9, Handle: 0x1f
Type: 8, Length: 9, Handle: 0x20
Type: 8, Length: 9, Handle: 0x21
Type: 8, Length: 9, Handle: 0x22
Type: 8, Length: 9, Handle: 0x23
Type: 8, Length: 9, Handle: 0x24
Type: 8, Length: 9, Handle: 0x25
Type: 8, Length: 9, Handle: 0x26
Type: 8, Length: 9, Handle: 0x27
Type: 8, Length: 9, Handle: 0x28
Type: 8, Length: 9, Handle: 0x29
Type: 8, Length: 9, Handle: 0x2a
Type: 8, Length: 9, Handle: 0x2b
Type: 8, Length: 9, Handle: 0x2c
Type: 8, Length: 9, Handle: 0x2d
Type: 8, Length: 9, Handle: 0x2e
Type: 9, Length: 13, Handle: 0x2f
Type: 9, Length: 13, Handle: 0x30
Type: 9, Length: 13, Handle: 0x31
Type: 9, Length: 13, Handle: 0x32
Type: 9, Length: 13, Handle: 0x33
Type: 9, Length: 13, Handle: 0x34
Type: 10, Length: 6, Handle: 0x35
Type: 11, Length: 5, Handle: 0x36
Type: 12, Length: 5, Handle: 0x37
Type: 13, Length: 22, Handle: 0x38
Type: 15, Length: 55, Handle: 0x39
Type: 16, Length: 15, Handle: 0x3a
Type: 19, Length: 15, Handle: 0x3b
Type: 17, Length: 27, Handle: 0x3c
MemoryDevice:
deviceLocator: DIMM0
bankLocator: BANK0
memoryType: DDR2 SDRAM
memorySpeed: 800MHz
errorHandle: ffff
manufacturer: Kingmax Semiconductor
serialNumber: 00000000
assetTag: AssetTagNum0
partNumber: KLDE88F-B8KY6
Type: 20, Length: 19, Handle: 0x3d
Type: 17, Length: 27, Handle: 0x3e
MemoryDevice:
deviceLocator: DIMM1
bankLocator: BANK1
memoryType: DDR2 SDRAM
memorySpeed: 800MHz
errorHandle: ffff
manufacturer: Kingmax Semiconductor
serialNumber: 00000000
assetTag: AssetTagNum1
partNumber: KLDE88F-B8KW6
Type: 20, Length: 19, Handle: 0x3f
Type: 17, Length: 27, Handle: 0x40
MemoryDevice:
deviceLocator: DIMM2
bankLocator: BANK2
memoryType: DDR2 SDRAM
memorySpeed: 800MHz
errorHandle: ffff
manufacturer: Kingmax Semiconductor
serialNumber: 00000000
assetTag: AssetTagNum2
partNumber: KLDE88F-B8KY6
Type: 20, Length: 19, Handle: 0x41
Type: 17, Length: 27, Handle: 0x42
MemoryDevice:
deviceLocator: DIMM3
bankLocator: BANK3
memoryType: DDR2 SDRAM
memorySpeed: 800MHz
errorHandle: ffff
manufacturer: Kingmax Semiconductor
serialNumber: 00000000
assetTag: AssetTagNum3
partNumber: KLDE88F-B8KW6
Type: 20, Length: 19, Handle: 0x43
Type: 32, Length: 20, Handle: 0x44
Type: 131, Length: 6, Handle: 0x44
AppleProcessorType:
ProcessorType: 0x501
Type: 127, Length: 4, Handle: 0x45
Customizing SystemID with : 20ae001e-8c00-0166-9283-0022156a9a35
ACPI Table not found: DSDT.aml
ACPI Table not found: SSDT.aml
FADT: Restart Fix applied !
Starting Darwin x86_64
Boot Args: boot-uuid=4AF0FD58-0668-3BBF-A7FC-BF0BCE349D3C rd=*uuid npci=0x2000

Share this post


Link to post
Share on other sites

Ermac,

 

On my Acer 5742g I've installed ML and have only 1 big problem: After wake from sleep I get no picture , just some {censored} of lines.

On Lion everything was OK. OpenCl is working to, just no desktop after wake.Card is Nvidia GT420M

Any Idea?

Is this some power managment trouble or just video card?

Also can You fix the video ram in your loader, card is 1024mb but shown false =512 mb

 

 

 

Share this post


Link to post
Share on other sites

Looks like there is a problem in the code for the Sapphire HD 5750 1GB GDDR5 video card that makes it use the default framebuffer no matter what you do. For this video card it should be 0x68be1002 instead of 0x68BE1002 (=no capital letters). Not sure if this would change anything but it sure seem it is worth a try. Its a good card got a DP port = you can have 3 displays hooked up to it.

 

Its a "Juniper" card

Share this post


Link to post
Share on other sites

Hi I dont know is this is wrong plcae to ask help of my issue...

 

I installed Xcode Command Line Tools... afte that I can't longer compile Chameleon, any one that can help me ?

 

See below error code i got....

 

 

 

ld: warning: -segaddr __INIT not 4096 byte aligned
ld: warning: grandfathering in old symbol '__DATA__bss__begin' as alias for 'section$start$__DATA$(bool, short, short)'
ld: warning: grandfathering in old symbol '__DATA__bss__end' as alias for 'section$end$__DATA$(bool, short, short)'
ld: warning: grandfathering in old symbol '__DATA__common__begin' as alias for 'section$start$__DATA$__common'
ld: warning: grandfathering in old symbol '__DATA__common__end' as alias for 'section$end$__DATA$__common'
Undefined symbols for architecture i386:
 "start", referenced from:
 -u command line option
 (maybe you meant: _start_built_in_module, _startprog , dyld_void_start , _symbols_module_start , _start_built_in_modules )
ld: symbol(s) not found for architecture i386
collect2: ld returned 1 exit status
make[3]: *** [boot] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

Share this post


Link to post
Share on other sites

Hi I dont know is this is wrong plcae to ask help of my issue...

 

I installed Xcode Command Line Tools... afte that I can't longer compile Chameleon, any one that can help me ?

 

See below error code i got....

 

 

 

ld: warning: -segaddr __INIT not 4096 byte aligned
ld: warning: grandfathering in old symbol '__DATA__bss__begin' as alias for 'section$start$__DATA$(bool, short, short)'
ld: warning: grandfathering in old symbol '__DATA__bss__end' as alias for 'section$end$__DATA$(bool, short, short)'
ld: warning: grandfathering in old symbol '__DATA__common__begin' as alias for 'section$start$__DATA$__common'
ld: warning: grandfathering in old symbol '__DATA__common__end' as alias for 'section$end$__DATA$__common'
Undefined symbols for architecture i386:
 "start", referenced from:
 -u command line option
 (maybe you meant: _start_built_in_module, _startprog , dyld_void_start , _symbols_module_start , _start_built_in_modules )
ld: symbol(s) not found for architecture i386
collect2: ld returned 1 exit status
make[3]: *** [boot] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

I get the same error, so I used the precompiled binaries in post 1.

Perhaps the person who compiled them would say how it was successfully done.

I suspect that this problem is isolated to Xcode 4.4, and they were compiled by an earlier version.

Share this post


Link to post
Share on other sites

What excat do you mean / whats the problem with your fermi . Your nvidia dev-id not in the chameleon list for graphicsenabler ? Then an chameleon/chimera problem.

General problems ( freezes, problems with connectors ...) cant get fixed by chameleon/chimera for my knowledge.

Share this post


Link to post
Share on other sites

Yes, I was thinking that fermi freezing after wake and simular could be solved by an chameleon bootloader update. My mistake then if so.

Share this post


Link to post
Share on other sites

I ran Chameleon (2030) from my 10.6 HD and installed it on USB stick (ML installer I was building & need to redo)... now I want to run the package again but can't run it nor ANY Chameleon Packages? After I click the 1st "Continue" screen, it dies. I've tried to re-download and it will not work.

 

update: never mind I had to use Chameleon_2.1svn_r1820_trunk_10.8.pkg to get things going again. My hardware is 4 years old now, maybe new installers are a problem for that. Anyway back on ML again.

Share this post


Link to post
Share on other sites

I only can boot with chameleon 2.0_r780_trunk_4570m_shrike on my Dell studio 1555. I've tried to install some other versions ( need to access to icloud).... without success.

Did someone have an idea ?

 

thx

 

 

PS: please excuse my poor english but i only speak french.

Share this post


Link to post
Share on other sites

Update the first page with revision 2042.

both Chameleon and my Enoch branch.

 

Actually I do the edits with Lion and Xcode 4.3...

so I have no idea about the problem with Xcode4.4+ML

 

Fabio

Share this post


Link to post
Share on other sites

Update the first page with revision 2042.

both Chameleon and my Enoch branch.

 

Actually I do the edits with Lion and Xcode 4.3...

so I have no idea about the problem with Xcode4.4+ML

 

Fabio

Thanks, hopefully the code will be made to work with Xcode 4.4 at some point, as 4.3 doesn't run on ML.

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By thomaspetersen
      Hi All
       
      I'm trying to start a Hackintosh High Sierra 10.13.5 installation:
      - MSI B350 PC Mate
      - Ryzen 5 - 2600
      - Radeon Pro 580 GPU
      - 4 x 8GB DDR4
      (Have a working clover bootloader for HS 10.13.3 - but for some reason, I can't use that setup with the 10.13.5) 
       
      Have tried different bootloader setup, with different outcomes...
      ATM. I get this error/hang - "Unknown CPU: family = 0x17, model = 0x8, Stepping = 0x2"
      Have search google, and can see that the threads ppl. are getting this, is when they look at "About this mac", I haven't yet installed the OSX.
       
      So can someone help...

      I'm running the newest Kexts: AppleALC, FakeSMC, Lilu, RealtekRTL8111, USBInjectAll and WhateverGreen.
      In Bootloader setup, i'm running: -v, -s, -f, -no_compat_check, busratio=34, PCIRootUID=1, npci=0x2000, dart=0 and nv_disable=1
      In SMBIOS i'm using the iMac18,2 and in RT i'm using BooterConfig: 0x28 and CsrActiveConfig: 0x67
      In installed drivers i'm using: AptioMemoryFix, EmuVariableUefi-64, OsxAptioFixDrv-64 (Have tried Fix2 as well)
       
      But i'm, keep getting the Unknown CPU hang/error, can someone help...
      Or do someone have a setup with the same CPU and GPU, that can show me his/her setup for Bootloader/Kexts...
    • By Slice
      Now I want to add vector graphics support in Clover. See rev 4560 and later.
      It is not working yet but designers may begin to create Vector Themes.
      It supposed to consist of SVG elements and has design size. It will be rendered to any screen size scaled from design size.
       
      What application in macOS can create SVG graphics?
      Inkscape is not working in macOS 10.11+. Pity.
      LibreOffice Draw works with SVG but buggy.
      Boxy SVG cost 10$ but looks good enough. It creates the best in simplicity files and have more then enough features.
      Illustrator is good but expensive.
       
      How to improve SVG file?
      Clover has restricted support for SVG. It is your job to make compatible file and as small as possible to speedup rendering.
      Some helps:
      Help:Inkscape – From invalid to valid SVG Inkscape files
      From invalid to valid SVG Adobe Illustrator files
      From invalid to valid SVG files of other editors: BKchem, ChemDraw and CorelDRAW
      Help:Illustrator – Assistance with creating and saving SVG images in Adobe Illustrator that will pass W3C validation
      User:Quibik/Cleaning up SVG files manually
      Later I will write own instructions specific to Clover abilities.
       
      How to create SVG fonts?
      You can google to find ready-to-use SVG fonts.  I found some problems with too beaty fonts: slow rendering and overflow crash. Be careful.
      You can get ttf or otf fonts and convert them into svg by using online WEB services. Not a problem to google.
      But then I want to find a way to simplify the font to reduce a size and speedup rendering.
      You can create own font by FontForge It is opensource and available for Windows, Mac and GNU+Linux. It creates otf font which you can convert to svg font.
       
      Pictures from Badruzeus
      https://www.insanelymac.com/forum/applications/core/interface/file/attachment.php?id=301597
    • By apianti
      Just so you all know I actually have done something. I have pushed the source to both my github and to sourceforge, please commit to the experimental branch and I will merge it into the stable branch once it is safe. Also, nothing meaningful happens yet so don't get too excited. Only the Visual studio build works right now. I haven't set up the Xcode or Makefile builds yet, I'm trying to do them now.
       
      https://github.com/apianti/Clover
      https://sourceforge.net/p/cloverefiboot/Clover
       
      IA32/X64/ARM/ARM64 testing ISO (6/7/2018): Clover-3.0-experimental.iso
    • By cvad
      Bootdisk Utility Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
      Special utility from cvad & russian MAC community for new hackintosh users.
       
      BDU_v2.1.2018.023b.zip
      MakeCloverBDUReadyZip.bat.zip
      Enjoy...
       
       
       
      Feel free to "Rate File"
      Submitter cvad Submitted 04/28/2013 Category Bootloaders  
      BDU_v2.1.2015.016b.zip
      BDU_v2.1.2015.018b.zip
      BDU_v2.1.2016.019b.zip
      BDU_v2.1.2016.020b.zip
      BDU_v2.1.2017.021b.zip
      BDU_v2.1.2017.022b.zip
×