Jump to content
ErmaC

Chameleon 2.4svn Official PKG Installer

4,344 posts in this topic

Recommended Posts

Advertisement

@ErmaC: There is an error compiling i386/libsaio/smbios.c with Xcode 8.3.  It needs -Wno-address-of-packed-member.  I've added this locally to i386/libsaio/Makefile to resolve, but needs some permanent solution.

Share this post


Link to post
Share on other sites

That was before having the nvram support back. Now if does not work, the only reason should be a bad kexts permissions or cache not updated properly.

Or a bug, but to enure this I need a ioreg, otherwise che ne so :P ?

Share this post


Link to post
Share on other sites

@ErmaC: Here's a patch that resolves -Waddress-of-packed-member and also works with Xcode earlier than 8.3 that don't recognize this warning

diff a/i386/libsaio/smbios.c b/i386/libsaio/smbios.c
--- a/i386/libsaio/smbios.c
+++ b/i386/libsaio/smbios.c
@@ -925,7 +925,7 @@ void addSMBOemProcessorType(SMBStructPtrs *structPtr)
 	p->header.length	= sizeof(SMBOemProcessorType);
 	p->header.handle	= handle++;
 
-	setSMBValue(structPtr, numOfSetters - 2 , (returnType *)&(p->ProcessorType));
+	setSMBValue(structPtr, numOfSetters - 2 , (returnType *)(void*)&(p->ProcessorType));
 
 	structPtr->new = (SMBStructHeader *)((uint8_t *)structPtr->new + sizeof(SMBOemProcessorType) + 2);
 	tableLength += sizeof(SMBOemProcessorType) + 2;
@@ -974,7 +974,7 @@ void addSMBOemProcessorBusSpeed(SMBStructPtrs *structPtr)
 	p->header.length	= sizeof(SMBOemProcessorBusSpeed);
 	p->header.handle	= handle++;
 
-	setSMBValue(structPtr, numOfSetters -1, (returnType *)&(p->ProcessorBusSpeed));
+	setSMBValue(structPtr, numOfSetters -1, (returnType *)(void*)&(p->ProcessorBusSpeed));
 
 	structPtr->new = (SMBStructHeader *)((uint8_t *)structPtr->new + sizeof(SMBOemProcessorBusSpeed) + 2);
 	tableLength += sizeof(SMBOemProcessorBusSpeed) + 2;

Edit: There's a discussion here of this warning.

Edited by Zenith432

Share this post


Link to post
Share on other sites

@ErmaC: Here's a patch that resolves -Waddress-of-packed-member and also works with Xcode earlier than 8.3 that don't recognize this warning

diff a/i386/libsaio/smbios.c b/i386/libsaio/smbios.c
--- a/i386/libsaio/smbios.c
+++ b/i386/libsaio/smbios.c
@@ -925,7 +925,7 @@ void addSMBOemProcessorType(SMBStructPtrs *structPtr)
 	p->header.length	= sizeof(SMBOemProcessorType);
 	p->header.handle	= handle++;
 
-	setSMBValue(structPtr, numOfSetters - 2 , (returnType *)&(p->ProcessorType));
+	setSMBValue(structPtr, numOfSetters - 2 , (returnType *)(void*)&(p->ProcessorType));
 
 	structPtr->new = (SMBStructHeader *)((uint8_t *)structPtr->new + sizeof(SMBOemProcessorType) + 2);
 	tableLength += sizeof(SMBOemProcessorType) + 2;
@@ -974,7 +974,7 @@ void addSMBOemProcessorBusSpeed(SMBStructPtrs *structPtr)
 	p->header.length	= sizeof(SMBOemProcessorBusSpeed);
 	p->header.handle	= handle++;
 
-	setSMBValue(structPtr, numOfSetters -1, (returnType *)&(p->ProcessorBusSpeed));
+	setSMBValue(structPtr, numOfSetters -1, (returnType *)(void*)&(p->ProcessorBusSpeed));
 
 	structPtr->new = (SMBStructHeader *)((uint8_t *)structPtr->new + sizeof(SMBOemProcessorBusSpeed) + 2);
 	tableLength += sizeof(SMBOemProcessorBusSpeed) + 2;

 

:) thx Zenith432

I do some test on my actual version of xcode (8.2.1)...

 

I need time to update my version of xcode to 8.x

MacBook-Pro:trunk fabio$ xcodebuild -version && xcode-select --version
Xcode 8.2.1
Build version 8C1002
xcode-select version 2347.
MacBook-Pro:trunk fabio$ 
ErmaC

Share this post


Link to post
Share on other sites

Pre-packed PKG are available in the download section.

 

Chameleon --> http://www.insanelymac.com/forum/files/file/59-chameleon-24-svn/

Enoch --> http://www.insanelymac.com/forum/files/file/71-enoch/

 

Note: those revision are exactly the same version that you can build by yourself, done by downloading and build it with the source code from official svn repository.

 

Note2: Chameleon support all OS X version from 10.4 to 10.12  (Yosemite, El Capitan and Sierra included!)..

(other functionality ...like patching on-fly are only available for Enoch)

 

Note3: Enoch support all the OS X version (until Sierra) and also can patch: kernel and kexts on-fly, also Enoch have an embedded FakeSMC.kext (in the case you missed it ;)) and iMessage FaceTime feature are available thanks to new module FileNVRAM (still under test)

all these changes and credits go to Micky1979.

 

 

 a tiny recap: from bootHelp.txt

 

 

The boot: prompt waits for you to type advanced startup options.
If you don't type anything, the computer continues starting up normally. It
uses the kernel and configuration files on the startup device, which it also
uses as the root device.
 
Advanced startup options use the following syntax:
 
    [device]<kernel> [arguments]
 
Example arguments include
 
 device: rd=<BSD device name>       (e.g. rd=disk0s2)
         rd=*<IODeviceTree path>    (e.g. rd=*/PCI0@0/CHN0@0/@0:1)
 
 kernel: kernel name                (e.g. "mach_kernel" - must be in "/" )
 
 flags: -v (verbose),                -s (single user mode),
        -x (safe mode),              -f (ignore caches),
        -F (ignore "Kernel Flags" specified in boot configuration file)
 
 "Graphics Mode"="WIDTHxHEIGHTxDEPTH" (e.g. "1024x768x32")
 
 kernel flags                       (e.g. debug=0x144)
 io=0xffffffff                      (defined in IOKit/IOKitDebug.h)
 
Example: mach_kernel rd=disk0s1 -v "Graphics Mode"="1920x1200x32"
 
If the computer won't start up properly, you may be able to start it up using
safe mode.  Type -x to start up in safe mode, which ignores all cached
driver files.
 
Special booter hotkeys:
-----------------------
  F5            Rescans optical drive.
  F10           Scans and displays all BIOS accessible drives.
 
Special booter commands:
------------------------
  ?memory       Displays information about the computer's memory.
  ?video        Displays VESA video modes supported by the computer's BIOS.
  ?norescan     Leaves optical drive rescan mode.
 
Additional useful command-line options:
---------------------------------------
  config=<file>             Use an alternate Boot.plist file.
 
Options useful in the org.chameleon.Boot.plist file:
----------------------------------------------------
  Wait=Yes|No               Prompt for a key press before starting the kernel.
  "Quiet Boot"=Yes|No       Use quiet boot mode (no messages or prompt).
  Timeout=8                 Number of seconds to pause at the boot: prompt.
  "Instant Menu"=Yes        Force displaying the partition selection menu.
 
  "Default Partition"     Sets the default boot partition,
    =hd(x,y)|UUID|"Label"    Specified as a disk/partition pair, an UUID, or a
                             label enclosed in quotes.
 
  "Hide Partition"        Remove unwanted partition(s) from the boot menu.
    =partition               Specified, possibly multiple times, as hd(x,y), an
     [;partition2 ...]       UUID or label enclosed in quotes.
 
  "Rename Partition"      Rename partition(s) for the boot menu.
    =partition <alias>       Where partition is hd(x,y), UUID or label enclosed
     [;partition2 <alias2>   in quotes. The alias can optionally be quoted too.
     ...]
 
  GUI=No                  Disable the GUI (enabled by default).
  "Boot Banner"=Yes|No    Show boot banner in GUI mode (disabled by default).
  ShowInfo=No             Disables display of partition and resolution details.
                            "Boot Banner"=No will also disable this info.
  "Legacy Logo"=Yes|No    Use the legacy grey apple logo (enabled by default).
 
  RebootOnPanic=Yes|No    (disabled by default).
 
  EnableHiDPI=Yes|No      Enable High resolution display (disabled by default).
 
  BlackMode=Yes|No        The new BlackMode loads the white Apple logo,
                             instead of the gray Apple logo, on a black background (disabled by default).
 
  CsrActiveConfig=<value> Set CsrActiveConfig for OS 10.11.x, range 0..127 (default 0x67)
 
  PciRoot=<value>         Use an alternate value for PciRoot (default value 0).
 
  UseKernelCache=Yes|No   Yes will load pre-linked kernel and will ignore /E/E
   and /S/L/E/Extensions.mkext.
Default is No but Yes if you use Lion on a Raid partition.
 
  KeyLayout=keymap        Use to change the keyboard mapping of the bootloader
                            (e.g. KeyLayout=mac-fr)
 
  HDAEnabler=Yes|No         Automatic device-properties generation for audio controllers.
    HDEFLayoutID=<value>    Inject alternate value of layout-id for HDEF (HEX).
    HDAULayoutID=<value>    Inject alternate value of layout-id for HDAU (HEX).
 
  GraphicsEnabler=Yes|No    Automatic device-properties generation for graphics cards.
    SkipIntelGfx=Yes|No     Skip the Automatic device-properties generation for Intel cards.
    SkipNvidiaGfx=Yes|No    Skip the Automatic device-properties generation for Nvidia cards.
    SkipAtiGfx=Yes|No       Skip the Automatic device-properties generation for Ati cards.
 
    NvidiaGeneric =Yes|No   Use the classic Nvidia name for the SystemProfiler (disabled by default).
    NvidiaSingle =Yes|No    If you have two cards Nvidia and wants to inject only
                              first one then you can set this parameter (enbaled by default).
 
    AtiConfig=<cardcfg>   Use a different card config, e.g. AtiConfig=Megalodon.
    AtiPorts=<value>      Specify the number of ports, e.g. AtiPorts=2.
    UseAtiROM=Yes|No      Use an alternate Ati ROM image
                            (default path: /Extra/<vendorid>_<devid>_<subsysid>.rom)
    UseNvidiaROM=Yes|No   Use an alternate Nvidia ROM image
                            (default path:  /Extra/<vendorid>_<devid>.rom)
    VBIOS=Yes|No            Inject VBIOS to device-properties.
    display_0=<value>       Inject alternate value of display-cfg into NVDA,Display-A@0 (HEX).
    display_1=<value>       Inject alternate value of display-cfg into NVDA,Display-B@1 (HEX).
    IntelCapriFB=<value>    For Intel Ivy Bridge, range 0-11.
    IntelAzulFB=<value>     For Intel Haswell, range 0-16.
    IntelBdwFB=<value>      For Intel Broadwell, range 0-19.
    IntelSklFB=<value>      For Intel Skylake, range 0-12.
    InjectIntel-ig=<value>  Inject alternate value into AAPL,ig-platform-id (HEX).
 
    EnableBacklight=Yes   Enable Back light option for NVIDIA and ATI
    EnableDualLink=Yes   Enable DualLink option for NVIDIA and ATI
    EnableHDMIAudio=Yes   Inject HDMI audio for NVIDIA and ATI.
 
  EthernetBuiltIn=Yes|No  Automatic "built-in"=YES device-properties generation
                          for ethernet interfaces.
  ForceHPET=Yes|No        Force HPET on (disabled by default).
 
  USBBusFix=Yes             Enable the XHCI, EHCI and UHCI fixes (disabled by default).
  EHCIacquire=Yes           Enable the EHCI fix (disabled by default).
  UHCIreset=Yes             Enable the UHCI fix (disabled by default).
  USBLegacyOff=Yes          Force USB Legacy off for XHCI and EHCI (disabled by default).
  XHCILegacyOff=Yes         Force USB Legacy off for XHCI (disabled by default).
 
  Wake=No                   Disable wake up after hibernation (enbaled by default).
  ForceWake=Yes             Force using the sleepimage (disabled by default).
  WakeImage=<file>          Use an alternate sleepimage file 
                              (default path is /private/var/vm/sleepimage).
 
  DropSSDT=Yes              Skip the SSDT tables while relocating the ACPI tables.
  Drop<file>=Yes            Skip:[HPET, SLIC, SBST, ECDT, ASF! or DMAR]
 
  DSDT=<file>               Use an alternate DSDT.aml file 
                              (default path: /DSDT.aml
                               /Extra/DSDT.aml bt(0,0)/Extra/DSDT.aml).
  HPET=<file>               Use an alternate HPET.aml file 
                              (default path: /HPET.aml
                               /Extra/HPET.aml bt(0,0)/Extra/HPET.aml).
  SBST=<file>               Use an alternate SBST.aml file 
                              (default path: /SBST.aml
                               /Extra/SBST.aml bt(0,0)/Extra/SBST.aml).
  ECDT=<file>               Use an alternate ECDT.aml file 
                              (default path: /ECDT.aml
                               /Extra/ECDT.aml bt(0,0)/Extra/ECDT.aml).
  ASFT=<file>               Use an alternate ASFT.aml file 
                              (default path: /ASFT.aml
                               /Extra/ASFT.aml bt(0,0)/Extra/ASFT.aml).
  DMAR=<file>               Use an alternate DMAR.aml file 
                              (default path: /DMAR.aml
                               /Extra/DMAR.aml bt(0,0)/Extra/DMAR.aml).
  APIC=<file>               Use an alternate APIC.aml file 
                              (default path: /APIC.aml
                               /Extra/APIC.aml bt(0,0)/Extra/APIC.aml).
  MCFG=<file>               Use an alternate MCFG.aml file 
                              (default path: /MCFG.aml
                               /Extra/MCFG.aml bt(0,0)/Extra/MCFG.aml).
  FADT=<file>               Use an alternate FADT.aml file 
                              (default path: /FADT.aml
                               /Extra/FADT.aml bt(0,0)/Extra/FADT.aml).
 
  GenerateCStates=Yes     Enable auto generation of processor idle sleep states
                            (C-States).
  GeneratePStates=Yes     Enable auto generation of processor power performance
                            states (P-States).
  CSTUsingSystemIO=Yes    New C-State _CST generation method using SystemIO
                            registers instead of FixedHW.
 
  EnableC2State=Yes       Enable specific Processor power state, C2.
  EnableC3State=Yes       Enable specific Processor power state, C3.
  EnableC4State=Yes       Enable specific Processor power state, C4.
  EnableC6State=Yes       Enable specific Processor power state, C6.
  EnableC7State=Yes       Enable specific Processor power state, C7.
 
  PrivateData=No          Show masked data (serial number) in bdmesg log (enbaled by default).
 
  ForceFullMemInfo=Yes    Force SMBIOS Table 17 to be 27 bytes long (disabled by default).
 
  SMBIOS=<file>             Use an alternate SMBIOS.plist file
                              (default path: /smbios.plist /Extra/smbios.plist
                               bt(0,0)/Extra/smbios.plist).
 
  SMBIOSdefaults=No         Don't use the Default values for SMBIOS overriding
                              if smbios.plist doesn't exist, factory
                              values are kept.
 
 
  KERNELPlist=<file>        Use an alternate kernel.plist file
                              (default path: /Extra/Kernel.plist
                               bt(0,0)/Extra/kernel.plist).
 
  KEXTPlist=<file>          Use an alternate kext.plist file
                              (default path: /Extra/Kext.plist
                               bt(0,0)/Extra/kext.plist).
 
  "Scan Single Drive"       Scan the drive only where the booter got loaded from.
    =Yes|No                 Fix rescan issues when using a DVD reader in AHCI mode. 
  Rescan=Yes                Enable CD-ROM rescan mode.
  "Rescan Prompt"=Yes       Prompts for enable CD-ROM rescan mode.
  SystemId=<UUID>         Set the system id manually to UUID.
                              Deprecated - Now SMsystemuuid in smbios.plist
                          SMUUID in smbios config (reserved field) isn't used then.
  SystemType=<n>          Set the system type to n, where n is between 0..6
                          (default=1 Desktop)
  md0=<file>              Load raw img file into memory for use as XNU's md0
                          ramdisk. /Extra/Postboot.img is used otherwise.
 

 

 

 

ErmaC

Share this post


Link to post
Share on other sites

...

 

Awesome :thumbsup_anim:  @Ermac && @Micky1979, Enoch r2877 just boot my 10.12.5 Beta (16F43c), but:

1. My patched DSDT.aml placed on /Extra won't loaded, but SSDT did (as we can see on my attached logs). Do I need to also install "ACPICodec" under Module section or something else?

2. I still have issue with NVIDIA WebDriver, though with nvda_drv=1 on Boot-args but my system still use Native Drivers. Do I need to write this on nvram.plist?

 

Also got some issue with my ELAN TrackPad (Emly Dinesh's ApplePS2SmartTouchpad, working KB) but it's not really important, since I'm using USB Mouse.

Thanks for advance, files attached below.  :)

Enoch-r2877-logs.txt

Badruzeus MacBook Pro.ioreg.zip

Extra.zip

post-826765-0-38226800-1490984087_thumb.png

Share this post


Link to post
Share on other sites

... files attached below.  :)

 

Pls remove Resolution Module from Extra/module folder

and also remove DSDT key from o.c.B.p

 

<key>DSDT</key>
<string>/Extra/DSDT.aml</string>

 

no extras modules are needed for your config (I think...) more than FileNVRAM for NVRAM business...

 

post the new log.

 

ErmaC

Share this post


Link to post
Share on other sites

 

2. I still have issue with NVIDIA WebDriver, though nvda_drv=1 are used on Boot-args but my system still use Native Drivers. Do I need to write this on nvram.plist?

nvda_drv=1 does nothing in Sierra if is a kernel flag. You need only to select web drivers using the official manager:

Senza_titolo.jpg

 

but also ensure that the Web drivers must be compatible with 10.12.5

 

EDIT

also remove the SMBIOS key since is already in /Extra/.

 

EDIT 2

may be you want to remove the 'Legacy Logo' and add "BlackMode = Yes" for a nicer black bacground/white apple? :yes: 

Share this post


Link to post
Share on other sites

Micky, Am I right in saying that for Sierra the FileNVRAM module is required along with NVIDIAWebDrv=Yes/No or is just the module enough for the web driver app to select the required drivers.

Share this post


Link to post
Share on other sites

Pls remove Resolution Module from Extra/module folder

and also remove DSDT key from o.c.B.p

<key>DSDT</key>
<string>/Extra/DSDT.aml</string>

no extras modules are needed for your config (I think...) more than FileNVRAM for NVRAM business...

 

post the new log.

 

ErmaC

 

nvda_drv=1 does nothing in Sierra if is a kernel flag. You need only to select web drivers using the official manager:

Senza_titolo.jpg

 

but also ensure that the Web drivers must be compatible with 10.12.5

 

EDIT

also remove the SMBIOS key since is already in /Extra/.

 

EDIT 2

may be you want to remove the 'Legacy Logo' and add "BlackMode = Yes" for a nicer black bacground/white apple? :yes:

 

Done! as suggested  :) now my Sierra 10.12.5 Beta (16F43c) works as expected with patched DSDT loaded, and working NVIDIA Web Driver.

But the best of it, (I feel) my system just boot faster  :D than b4. Thanks again @ErmaC && @Micky1979 (especially OTF patching methods) for this updated bootloader.

 

FYi, my OS X El Capitan 10.11.6 Beta (15G1502) also works very well with same config.

 

#Edit: @Micky1979 >> I still luv gray Apple boot screen, cz it reminds me with my 1st hackintosh using 10.6.x & Chameleon (which rev. I don't remember) LoL  :D

post-826765-0-28092500-1490987532_thumb.png

Enoch-r2877-logs-new.txt

Share this post


Link to post
Share on other sites

Pre-packed PKG are available in the download section.

 

Chameleon --> http://www.insanelymac.com/forum/files/file/59-chameleon-24-svn/

Enoch --> http://www.insanelymac.com/forum/files/file/71-enoch/

 

Note: those revision are exactly the same version that you can build by yourself, done by downloading and build it with the source code from official svn repository.

 

Note2: Chameleon support all OS X version from 10.5 to 10.12  (Yosemite, El Capitan and Sierra included!)..

(other functionality ...like patching on-fly are only available for Enoch)

 

Note3: Enoch support all the OS X version (until Sierra) and also can patch: kernel and kexts on-fly, also Enoch have an embedded FakeSMC.kext (in the case you missed it ;)) and iMessage FaceTime feature are available thanks to new module FileNVRAM (still under test)

all these changes and credits go to Micky1979.

 

ErmaC

 

(Just test & report):

Glad to know that Chameleon r2877 still supported the classic one (Mac OS X Snow Leopard 10.6.8) both with 32-bit & 64-bit arch on my mach.  :yes:

Thanks again.  :D

Chameleon-r2877-i386-10.6.8.txt

Chameleon-r2877-x86_64-10.6.8.txt

Share this post


Link to post
Share on other sites

Your old FileNVRAM module comes from?

 

P.S. you can use those directories to store kexts for different OSes:

 

Extra/Extensions/Common

Extra/Extensions/10.12

Extra/Extensions/10.11

Extra/Extensions/10.10

Extra/Extensions/10.9

etc..

 

This using only one Extra folder on the boot partition (the one where the boot file is installed)

Share this post


Link to post
Share on other sites

Just updated to the latest enoch r2877 and for some reason my system wont boot anymore. Using this on my AMD machine. Im seeing it get stuck at "Kext Patcher Started" Yet i dont have any kext.plist setup? Im sure im doing something wrong. Could anymore lead me in the right direction??

Extra.zip

post-1420666-0-06422100-1491173711_thumb.jpg

Share this post


Link to post
Share on other sites

type SkipKextsPatcher=Yes

 

use this Extra folder, and ensure you are using Enoch (not Chameleon)

You the Man! Booted right up. But my nvidia web drivers dont seem to be loading? 

Share this post


Link to post
Share on other sites

I'v updated my last post, look at the attached Extra folder. So if the problem is the kexts patcher (you have a modded kernel) also add SkipKextsPatcher=Yes to the org.chameleon.boot.plist

Tell me if the nvram show up

Share this post


Link to post
Share on other sites

I'v updated my last post, look at the attached Extra folder. So if the problem is the kexts patcher (you have a modded kernel) also add SkipKextsPatcher=Yes to the org.chameleon.boot.plist

Tell me if the nvram show up

Tried the new Extra folder, cleared all caches, still a no go for the nvidia drivers

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By cvad
      View File Bootdisk Utility
      Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
      Special utility from cvad & russian MAC community for new hackintosh users.
       
      Enjoy...
       
      For more information and complete instructions please see this topic.
       
      Anyone who likes the program, please support its Community Score.
       
       
      Feel free to "Rate File"
      Submitter cvad Submitted 04/28/2013 Category Bootloaders  
    • By PropoFlexWX4
      After hearing that OpenCore is so much better than Clover, and that it will probably be able to boot Big Sur before Clover does, I decided to take the jump.
       
      Running Catalina 10.15.5 18F101 with OC 0.5.9.
       
      So far I like the result. The OS feels faster, boots faster.
      And absolutely everything works (sleep, network, etc...)
       
      So, that's it? Is there anything else I have to do?
    • By MacPato
      ALL-IN-ONE OPENCORE EFI CREATION UTILITY
      OC Gen-X Opencore EFI Creator Utility  First-Ever Beta is now released to the Public for Testing. Bugs or Issues please submit bug reports via the GitHub page! https://github.com/Pavo-IM/OC-Gen-X  Also, tell us what you think and what future features you would like to see in the release.
      Opencore Generation X is a Utility to create a pre-structured EFI Folder to the Desktop Based on the selection of the user. This Application is currently in beta testing it was designed and developed to make it easy to get Opencore installed. The configuration file is based on the dortania guide.

      if you have any request, suggestions feel free to make a submission at the GitHub page   Disclaimer: This application is not endorsed or support by the opencore development team, all app support and bugs must be reported via the app repo page : https://github.com/Pavo-IM/OC-Gen-X         
    • By blackosx
      Do you want to quickly find your boot log, or ever wanted to know which version of bootloader is installed on your disk(s), had the need to dump your BIOS from OS X, just curious about your own system setup or been asked to provide your setup information to others when asking for assistance?
       
      DarwinDumper is a useful collection of readily available tools, and scripts wrapped in an application framework giving you a convenient method to quickly gather a system overview of your hack or Mac. And rest assured that enabling the privacy option will mask sensitive data like the IOPlatformSerialNumber, IOPlatformUUID, IOMACAddress(s), USB Serial Number(s), SystemSerialNumber, serial-number, fmm-mobileme-token-FMM, MLB and ROM efi vars and CustomUUID in the dumped files and report.

      Current Release Version: 3.1.1



      The system dumps are saved to a folder or your choice, but defaulting to the same directory as the main application. You can choose to setup a symlink to make it simple to run DarwinDumper from the Terminal.
       
      There is an option to create an html report showing a complete overview of the dumps. This report will mostly just contain the text dumps as you'll find in the main dump directory, but for some dumps there is extra processing to try to present the information in a better way. For example, the Disk Partitions and Unique ID's dump will show a visual map of the disk layout, and the DMI Tables (SMBIOS) dump will show the data split by table type.
       

       
      Note: The html report does not contain all files from a complete dump so if seeking assistance for a problem and you wish to send someone a DarwinDump then you will want to send the complete dump directory and not just the .html report file.
       
      The following can be read and dumped by DarwinDumper:
      - ACPI tables.
      - Audio codec and further info.
      - Boot loaders and configuration files.
      - CPU info.
      - Device-properties.
      - Disk partition structure / info.
      - Disk sectors (hex).
      - DMI (SMBIOS).
      - EDID.
      - I/O Kit Registry.
      - EFI Memory Map.
      - EFI vars (some).
      - Kernel information
      - Kexts - (list of currently loaded kexts).
      - Memory.
      - NVRAM (both Apple specific and UEFI firmware variables).
      - SMC Keys.
      - LSPCI (PCI vendor & device codes) dumps.
      - Power (Sleep/Hibernate) settings.
      - RTC.
      - System Profiler.
      - System BIOS.
      - System Log(s).
      - Video BIOS.
       
      License:
      DarwinDumper is licensed under GNU General Public License, version 3.0 (GPLv3).
       
      Tools included:
      AnalyseVBIOS
      Copyright: Not Known. License: Not known Source: http://www.insanelymac.com/forum/topic/211294-information-on-vesa-modes-in-atinvidia-bios/ Alt Link: https://www.dropbox.com/s/dnp903x2z9pqf8k/AnalyseVBIOS.zip?dl=0   AppleIntelInfo Copyright: © 2012-2017 Pike R. Alpha. All rights reserved. License: Creative Commons Attribution-NonCommercial Source: https://github.com/Piker-Alpha/AppleIntelInfo   atomdis Copyright: Michael Larabel @ Phoronix.com License: GPL Version 2 Source: http://www.phoronix.com/scan.php?page=article&item=amd_atombios_dumper   bgrep Copyright 2009 Felix Domke <tmbinc@elitedvb.net>. All rights reserved.   Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:      1. Redistributions of source code must retain the above copyright notice, this list of       conditions and the following disclaimer.      2. Redistributions in binary form must reproduce the above copyright notice, this list       of conditions and the following disclaimer in the documentation and/or other materials       provided with the distribution.   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.   The views and conclusions contained in the software and documentation are those of the authors and should not be interpreted as representing official policies, either expressed or implied, of the copyright holder.   Source: https://github.com/tmbinc/bgrep   bdmesg Copyright 2010 by Islam M. Ahmed Zaid. All rights reserved. License: GPL Version 2 Source: http://forge.voodooprojects.org/p/chameleon/source/tree/HEAD/trunk/i386/util/bdmesg.c Alt Link: https://sourceforge.net/p/cloverefiboot/code/1905/tree/CloverPackage/utils/bdmesg/bdmesg.c   cmosDumperForOsx Created by rafirafi, revised extensively by STLVNUB License: Information not available Source: https://www.dropbox.com/s/bg1q0yho6g7u3xn/cmosDumperForOsxV0.1.zip?dl=0   csrstat Created by Piker-Alpha Copyright: © 2015-2017) by Pike R. Alpha License: Information not available Source: https://github.com/Piker-Alpha/csrstat   dmidecode Original nongnu.org
      License: GPL Version 2
      Now updated and hosted by acidanthera Source: https://github.com/acidanthera/dmidecode   dumpACPI Created by blackosx. Idea taken from PHPdev32's MacIASL. Source: https://bitbucket.org/blackosx/dumpacpi   edid-decode Created by Adam Jackson, revised by Andy Vandijck License: Information not available Original Source: http://cgit.freedesktop.org/xorg/app/edid-decode Revised Source: https://www.dropbox.com/s/l0htffnqzs9e1vg/edid-decode.zip?dl=0   fdisk440 Apple Computer, Inc. License: APSL v2.0 Original Source: http://www.opensource.apple.com/source/diskdev_cmds/diskdev_cmds-491/fdisk.tproj/mbr.h Modified by Zef Source: http://forge.voodooprojects.org/p/chameleonApplications/source/tree/HEAD/trunk/fdisk.tproj Alternate Link: https://www.dropbox.com/s/odl9kp38j3flla5/fdisk440.zip?dl=0   FirmwareMemoryMap script Amit Singh (showbootermemorymap) Further development by bcc9 and dmazar License: Information not available   flashrom http://flashrom.org/Flashrom License: GPL Version 2 Source: https://www.dropbox.com/s/gfmqx2t7lvofs1v/flashrom.zip?dl=0   getcodecid Copyright © 2012 AnV Software. All rights reserved. License: Information not available Source: https://github.com/Gengik84/getcodecid   getdump Created by fassl?, modifications by Slice and AutumnRain? License: Information not available Source: https://sourceforge.net/projects/voodoohda/files/   gfxutil Copyright 2008 mcmatrix. All rights reserved. License: Information not available Historic detail can be found at forum.netkas.org Source: https://github.com/acidanthera/gfxutil   iasl Copyright © 2000 – 2014 Intel Corporation. License: Information not available Source for v20200110: https://www.acpica.org/node/176   ioregwv Apple Computer, Inc. License: APSL v2.0 Original Source: https://opensource.apple.com/source/IOKitTools/IOKitTools-86/ Modified by blackosx Source: https://bitbucket.org/blackosx/ioregwv   lzma Copyright © 2013 Igor Pavlov. License: GNU Lesser General Public License Source: http://www.7-zip.org/sdk.html This build by Slice at insanelymac.com: https://www.insanelymac.com/forum/topic/311786-updated-lzma-utility-v1514/   lzvn Copyright: © 2014 Apple Computer, Inc. All rights reserved. License: APSL Credit: Piker-Alpha, Andy Vandijck, MinusZwei. https://github.com/Piker-Alpha/LZVN   MacGap2 Created by Tim Debo. All rights reserved. License: MIT Source: https://github.com/MacGapProject/MacGap2   Macpmem driver (Macpmem.kext) Copyright © 2007-2011 Volatile Systems. Copyright 2013-2014 Google Inc. All Rights Reserved. License: GPL Version 2 Source Code: https://github.com/google/rekall/tree/master/tools/osx/MacPmem]https://github.com/google/rekall/tree/master/tools/osx/MacPmem   nvram Apple Computer, Inc. License: APSL v2.0 Modified by blackosx Source: https://bitbucket.org/blackosx/nvram   oclinfo Copyright © 2009 cmf License: GPL Version 2 Source: http://www.insanelymac.com/forum/topic/170796-opencl-info/   pciutils driver (DirectHW.kext) DirectHW is Copyright © 2008-2010 coresystems GmbH License: GPL Version 2 Source: https://github.com/CloverHackyColor/directhw Kext: Pre-built (Signed) Kext   pciutils lspci Copyright © 1997--2008 Martin Mares License: GPL Version 2 Source Code: https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git
      RadeonDump Created by Dong Luo. Copyright 2008. All rights reserved. Modified by Andy Vandijck License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068 Alt Link: https://www.dropbox.com/s/5drpckxlmaot732/RadeonPCI.zip?dl=0   radeon_bios_decode Created by Dong Luo. Copyright 2008. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   SMC_util_FansOnly Copyright © 2006 devnull  License: GPL Version 2 Source: https://www.dropbox.com/s/ra9h6gbjj6yhgol/SMC_util_FansOnly.zip?dl=0   smcutil Copyright © 2006 devnull  License: GPL Version 2 Source: https://www.dropbox.com/s/0dgvexijx4oewfr/smcutil.zip?dl=0   VoodooHDA.kext Created by fassl?, modifications by Slice and AutumnRain? License: https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h]https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h Source: https://sourceforge.net/p/voodoohda/code/HEAD/tree/]https://sourceforge.net/p/voodoohda/code/HEAD/tree/   x86info Written to succeed CPUID by Phil Karn (KA9Q). Contributed to by various people. OS X compatability by Slice License: GPL Version 2 Original Source: https://github.com/kernelslacker/x86info Revised Source: https://github.com/CloverHackyColor/x86info  
       
      Running DarwinDumper from the command line:
      From Terminal, you can initiate DarwinDumper by running the following script directly.
      /DarwinDumper.app/Contents/Resources/public/bash/script.sh To help with this, the UI has a Symlink option which you can click to create a symbolic link which points to the above script. DarwinDumper can then be subsequently run from the command-line by loading a new Terminal window and typing darwindumper followed by return.
      $ darwindumper usage: [-a zip,lzma,none] [-d acpi,appleintelinfo,audio,biosSystem,biosVideo,codecid,cpuinfo,devprop,diskLoaderConfigs,bootLoaderBootSectors,diskPartitionInfo,dmi,edid,bootlogF,bootlogK,firmmemmap,memory,ioreg,kernelinfo,kexts,lspci,rcscripts,nvram,opencl,power,rtc,sip,smc,sysprof] [-h] [-l] [-o html,private] [-p 1,2,3,4,5,6,7,8] [-v] Example:
      $ darwindumper -l Will re-run the last dump used options.

      Credits (in alphabetical order):
      acidanthera team, Adam Jackson, Amit Singh, Andy Vandijck, Apple Inc., arsradu, bcc9, blackosx, cmf, DieBuche, dmazar, Dong Luo, droplets, ErmaC, Felix Domke, Google Inc., Intel Corporation, InsanelyDeepak, JrCs, Kabyl, Kynnder, Martin Mareš, mcmatrix, Michael Larabel, Mickey1979, phcoder, Phil Karn, Piker-Alpha, rafirafi, гык-sse2, Slice ,sonotone, STLVNUB, THe KiNG, Trauma, Volatile Systems, xsmile, !Xabbu.
       
      DarwinDumper was originally inspired as an open project by Trauma, it has remained an open project and please keep it an open project, so if you make any changes or additions to it then please share your work here.
       
      Please report any feedback, requests or bugs.
       
      Known issues: v3.1.0
      1 - When SIP File Protection is enabled, dumping disk partition info of non-APFS containers and disks which are not APFS physical stores may fail when running from DarwinDumper via the graphical interface. However, it's been known to succeed when using DarwinDumper from the command line. Something to do with osascript.
      2 - lzma archive option has been known to fail on macOS 10.15 when running dumps requiring root privileges.
       
      macOS Version support:
      - v2.9.9.2 is for older macOS versions
      - v3.0.4 requires OS X 10.9 and newer to run in the Finder, though it should work from the command line okay on older OS versions.
      - v3.1.0 was updated for newer macOS versions and has been tested on 10.13 and 10.15.

      DarwinDumper Download
×