Mr.KiLLeR Posted August 25, 2010 Share Posted August 25, 2010 Hello Guys, I have been working on Hackintosh for last 6 months now, trying to figure out how to make my pc in to a hackintosh! and finally today, i got it all everything is working perfect I searched a guide for Asus P5KPL-AM SE and didn't get a good guide so i thought to make a good guide explaining everything IF YOU HAVE ANY QUESTIONS JUST PM ME HERE! I've used this settings to install everything : OSX 10.6.2 Kernel : legacy kernel 10.2.0 Bootloader : Chameleon RC4 GraphicsEnabler ATI : EvoenablerSLE Cmos RST Fix : LegacyAppleRTC Sata Ata Fix : ahci sata fix and ioatafamaly sata fix patches : smbiosresolver I used Snow_Leopard_10.6.1-10.6.2_Intel_AMD_made_by_Hazard (Google It You will Get The Torrent on TPB) Had some problems with ethernet, just install the drivers from Realtek Site and use RTL8139 Kext to work it out, otherwise just contact me, i will fix it for u ANY QUESTIONS CONTACT ME OR JOIN MY SITE www.war3z.net Regards Link to comment Share on other sites More sharing options...
DappleBook Posted September 19, 2010 Share Posted September 19, 2010 I have this motherboard with 4 Gigs of Ram and an Nvidia 9500GT 1GB graphics card. I tried to install the Hazard version of SL a couple times but gave up... After reading your post I popped in a spare drive I had and followed your info and voila, am now writing this from the SL box. Followed instructions for the 10.6.4 combo update and got that in as well. The only thing I did differently due to my graphics card was choose NVenabler. The ethernet drivers RTL8139 from 2006 on the Realtek website worked just fine. (edit) I discovered that if you don't choose any Network the right drivers get installed OOB so that's easier. I also added a generic 4 port usb 2.0 card and it works but only with some of my usb devices but I'm fine with that. My magic jack phone even works with this build which is cool. On my AMD iDeneb box it wouldn't run. Thanks so much for posting which items to choose on the install. I've done many Hackintosh PC's to date but this one was the smoothest and I'm really pleased with it. Some pics for a better visual. I reinstalled and changed the name of the boot drive which is why it's different among the pictures. Link to comment Share on other sites More sharing options...
Mr.KiLLeR Posted September 21, 2010 Author Share Posted September 21, 2010 I have this motherboard with 4 Gigs of Ram andan Nvidia 9500GT 1GB graphics card. I tried to install the Hazard version of SL a couple times but gave up... After reading your post I popped in a spare drive I had and followed your info and voila, am now writing this from the SL box. Followed instructions for the 10.6.4 combo update and got that in as well. The only thing I did differently due to my graphics card was choose NVenabler. The ethernet drivers RTL8139 from 2006 on the Realtek website worked just fine. I also added a generic 4 port usb 2.0 card and it works but only with some of my usb devices but I'm fine with that. My magic jack phone even works with this build which is cool. On my AMD iDeneb box it wouldn't run. Thanks so much for posting which items to choose on the install. I've done many Hackintosh PC's to date but this one was the smoothest and I'm really pleased with it. Gr8, i m pleased that i have helped one person atleast but i can't update to 10.6.4, i get kernal panic (i think due to ATI card) but i have one more problem now i just bought TP Link TL-WN951N with Atheros 5416 Chipset and it never gets working natively in 32-bit mode (as some thread says here) , i used atheros on installation and added my dev id and reboot the system, it never gets to the desktop again,if it gets to the desktop, nothing is clickable... if it works perfect upon restarting, when i use the guide to work my guide (guide here somewhere for my card) and then it never works.. i think i m not using the right bootloader Link to comment Share on other sites More sharing options...
DappleBook Posted September 24, 2010 Share Posted September 24, 2010 Gr8, i m pleased that i have helped one person atleast but i can't update to 10.6.4, i get kernal panic (i think due to ATI card) Damn that sux. You're probably right about the Ati video card. I checked the OSX86 wiki and every listing for these P5K series boards shows folks using Nvidia cards. Much luck to you in trying to sort it. I'm loving this SL build. It's very stable and enjoyable to use. Only one problem I'm experiencing and it's not that big of a deal but.. I've got a two yr old TEAC card reader. It works but the computer won't go into Sleep with the reader connected so I've been opening the case and plugging it in only when I need to use it. Kind of a pita but I suppose there could be worse issues. Link to comment Share on other sites More sharing options...
neil071219 Posted November 8, 2010 Share Posted November 8, 2010 sir can you help me in this computer components Motherboard: Asus P5KPL-AM SE Processor: Intel Core 2 Duo E7500 Video Card: Intel G33/G31 Express Chipset Family Hard Disk: Seagate 250 GBs Current Operating System: Windows 7 Ultimate Link to comment Share on other sites More sharing options...
pongpogi Posted November 10, 2010 Share Posted November 10, 2010 i have the same board managed to update it up to 10.6.5 beta but out of luck i cant make the audio work with alc662 and patched applehda.im using voodoohda as a remedy as of now but still i wanna use applehda and make it work.so,guys what method did you use for the audio? thanks. Link to comment Share on other sites More sharing options...
Maroc-OS Posted December 22, 2011 Share Posted December 22, 2011 Hello every body, I CREATED A TOPIC FOR THIS MOBO AND DSDT. http://www.insanelymac.com/forum/index.php?showtopic=273793 --------------------------------- Fixes for all your problems. Snow Leopard 10.6 here BIOS VERSION 702 sleep/wak, speedsteep, uhci/ehci, sata/pata, rtc, and moooooore. test it and give back, for kexts i use : XPC Bootloader fakesmc.kext IOATAFamily.kext / patched IOPCIFamily.kext / patched but need one that can works great on 32 bit this work perfect on 64 bit. NullCPUPowerManagement.kext RealtekR1000SL.kext sound not tested yet but it seems works with vodooHDA sorry for my bad english -------------------------------------- UPDATED : All devices Changed like a real mac. sound injected by adding HDEF device for ALC887/888b (not tested yet). fixed somme things in UHCI/EHCI and SATA. (Ven & Dev ID's injected) IDE are fully working without problems. LPC dev & ven ID's Injected. DTGP Method added. The full working HPET implemented no more needs for hacks. Shutdown fix. sleep are fully fixed. -------------------------------------- NEXT : Fixe the Network and all related things. Adding SMBus like Apple Products. A BIOS READY FOR FLASH. -------------------------------------- NEED's : A Perfect 640 x 480 BMP Apple Splash Image with 300Ko Only. What you think about the best Apple Product that we can use with this mobo? (iMac,Mac Pro OR ...) And what is the version. DSDT.zip Link to comment Share on other sites More sharing options...
Recommended Posts