Is it possible to install an older OS X.5 Leopard or OS X.6 Snow Leopard Hackintosh system on a modern i7 processor PC?
I need to to run either of those systems using an Intel Core i7-4770K Quad-Core Desktop Processor on a Gigabyte GA-Z87MX-D3H motherboard.
I saw this post where someone said “Clover 32Bit should boot Leopard as well, using Legacy mode. You will need 32bit kexts as well.” https://www.insanelymac.com/forum/topic/331457-bootloader-for-leopard/ .. Would that be valid advice for me to follow up on for my configuration? I see that Clover 32 bit is no longer in development.. https://www.insanelymac.com/forum/topic/317521-good-bye-clover-32/
Here is my little guide to install OSX 10.6.8 on the EeePC 1000H.
I'll quote some of the CicciMTS and scenemusic topics, thank you guys.
What is needed ?
A Asus EeePC 1000H
A 8GB or more USB Pen drive
An empty hard disk drive
An other mac or hackintosh
A USB mouse
My package of tools, including the latest Apple OS X 10.6.8 Combo update
Restore and Boot from USB
On your mac/hack, go to Disk Utility, find your USB Pen drive, erase it with GUID Partion Table and Mac Extended Format (journaled). Then, restore your iAtkos image on your USB pen drive.
Next, you need to make your USB drive Bootable. Find Chameleon in the tools Folder, open it and install it on your new Snow Leopard USB pen drive.
Boot into BIOS, if available, set the SATA mode to AHCI. If you can't it should work too so don't worry
Select your USB Pen Drive and boot on it. Chameleon will appear, select your iAtkos install drive, and type -v to boot in verbose mode. After a moment, the OSX installer should appear. Trackpad will not work so plug in a usb mouse. Select your language and click next. on the top of the screen, find disk utilty, and erase your HDD with GUID Partion Table and Mac Extended Format (journaled) options, and close Disk Utility. Click Next until the installer ask you on which drive you want to install OSX. Do not install it yet, click on Customize. Select the following options :
-BOOT OPTIONS 32BITS GRAPHICS ENABLERS ETHERNET BUILTIN USB (all)
-PATCHES CREAR EXTRA FAKESMC DISABLER RTC KERNEL ATOM EVOREBOOT SLEEPENABLER UUID
-DRIVERS SATA-IDE SATA/AHCI or INTEL SATA/IDE if you didn't enable AHCI in your bios
-PS2 VOODOOPS2 or APPLEPS2
-LAPTOP HARD BATTERY CARD READER THERMAL ACPI
-VGA INTEL EFI STRING GMA950 (all)
-WIFI Ralink RT2860
-WIRED ATLANSIC L1E
Click OK and install OSX on your HDD.
First Boot and update to 10.6.8
Remove your USB stick from your computer, Chameleon should appear, boot your new OSX installation with -v boot flag. Once you've created your account you should be on your desketop.
Run the Combo Update installer but do not reboot!! Force Quit out of the installer (hold down the Option key and click and hold over the Installer icon in the Dock. Select Force Quit) and Run the Legacy Kernel installer and then reboot the machine.
now you should see that your graphics driver doesn't work anymore. Run Kext Utility and let it repair the permissions and update the cache. when it says "all done" drag and drop all the graphics kext into kext utility, and when it says "all done", reboot your computer. Cross your fingers and reboot your computer. You should now have a fully working EeePC 1000H, with graphics, sound, wifi, USB, bluetooth and Ethernet Working with the lastest Snow Leopard update. You can have the latest security updates on your system with Software Update, it will not damage your installation.
Sorry for my bad english, I'm french. Fell free to ask questions if you need, thank you guys
I tried to post this question on another website (which I will leave unnamed), who apparently do not support OS X Leopard anymore. Thank goodness InsanelyMac does!
Anyway. I'm trying to build my first hackintosh, and as stated, on boot of the OS X Leopard installer, I hit the following error:
Bug: launchctl.c:2325 (23930):30: (dbfd = open(g_job_overrides_db_path, 0_RDONLY | O_EXLOCK | O_CREAT, S_IRUSR | S_IWUSR)) != -1
(see attached photo. I apologize for low quality image. Best I could get :/)
Booting with -s -v doesn't help. I get to the single user BASH shell, type exit as instructed to boot the system, and hit another hang. I assume it is the same error in the background.
Booting without -v simply shows the apple logo and the spinning loading circle indefinitely.
I am booting on an IBM X41 tablet computer (Screen is dead, however. I have to use VGA.) I am using Chameleon 2.1 r2069, and my boot disk is a USB which was 'restored' on a MacOS Sierra computer to contain the OS X Leopard install DVD, as well as Chameleon.
Originally, I attempted with A legacy version of an unnamed bootloader, however hit the following:
boot0: GPT boot0: testing boot0: testing boot0: testing boot0: error
Which lead me to change bootloaders to Chameleon.
I had to delete all graphics kexts to get this far, and I have to use a USB keyboard, because the built in one doesn't work past chameleon (I.e. for single user mode).
As far as I'm aware, the BIOS is set up correctly, and the HDD is completely empty. The USB I'm booting with is on an MBR partition scheme, as GUID wouldn't work.
I also tried the Voodoo patched Kernel. No joy.
Finally, I have also attempted the install with OS X Tiger (same method for boot disk). That OS only manages to get as far as Darwin, before crashing.
Specs aren't pretty, but should be able to run Tiger and / or Leopard just fine:
Intel Pentium M LV 758 @ 1.2GHz 512MB DDR2 Ram 1.8" 60GB HDD @ 4200RPM Intel PRO 2200BG WiFi
Unlike the reply on the other unnamed website suggests, I know that WiFi and Graphics are both compatible if you poke around enough, because of the following YouTube video, however my VGA prediciment could break the graphics:
Hopefully someone can help with my ancient OS install :/ Hopes aren't high, but anyway.
Hello. After i have succesfully installed Snow Leopard on my HP computer with a AMD Athlon 64 x2, It brings up a kernel panic everytime it loads. I have a Nvidia Geforce 210 1 GB graphics card. I can boot it in Safe Mode but it is super slow to add. Please help...