Jump to content
Swad

Callisto Technical Discussion

826 posts in this topic

Recommended Posts

not working on my radeon mobility 9000.

 

installed okay. first reboot it kicks into 1024x768 and appears to work okay then on resolution change the screen fades to blue, then purple and i get some weird fade thing going on. rebooting causes the fade to persist when the system comes up. no way to get into the os without removing the kexts in single user mode.

 

keep up the good work though :D i look forward to future releases!

Share this post


Link to post
Share on other sites
Advertisement

No CI or QE, as expected, but I can say that the driver at least loads ok on my 200m. Few issues though:

* Resolution change, like with so many others, not working

* System Profiler reports only 16mb memory as opposed to the actual 64 or 128...

 

But we're getting there, you're doing awesome omni. Keep it up!

Share this post


Link to post
Share on other sites
This is probably a really really stupid question. I looked at the FAQ, specifically, this:

 

# How do I get the QE/CI/OpenGL KEXTs to work with Callisto?

Look in your /System/Library/Extensions folder for ATIRadeonXXXX.plugin/ (XXXX depends on your card model). Edit its Info.plist, under IOProviderClass key change IONDRVFramebuffer to CallistoFB, update or delete Extensions.mkext and Extensions.kextcache, then reboot.

 

I looked in the Extensions folder, but found no ATI files there at all, apart from ATI.kext... any ideas why I can't find it?

I'm using a Radeon 200m, if it makes any difference.

 

same here about didnt find not ATIRadeonXXXX.plugin inside Extensions Folder

My Asus a9250ge/256m aka Radeon 9250 Pro that OSX recognizes as a 9200 Pro id is 5960

Share this post


Link to post
Share on other sites

Works here, resolution changes give out of frequency. (Native res works though).

 

ATI Radeon 9700/9500 Series:

 Chipset Model:	ATI Radeon 9700/9500 Series
 Type:	Display
 Bus:	PCI
 VRAM (Total):	128 MB
 Vendor:	ATI (0x1002)
 Device ID:	0x4e44
 Revision ID:	0x0000
 Displays:
Display:
 Resolution:	1024 x 768 @ 60 Hz
 Depth:	32-bit Color
 Core Image:	Supported
 Main Display:	Yes
 Mirror:	Off
 Online:	Yes
 Quartz Extreme:	Supported

 

CallistoHAL Initialized!
Callisto: omni's ATI Driver&FrameBuffer, build 001, 30-Apr-06
Callisto: MMIO range@0x18 (ff8f0000) mapped to kernel virtual address 0x1b36c000
Callisto: Found 131072k of DDR 256 bits wide videoram
Callisto: VRAM range@0x10 (d0000000:08000000)
Callisto: Connection on port 1 not detected, but there is connection on port 2 (swapping 2->1)
Callisto: Found Monitor: CRT
Callisto: done with ATI Radeon ND

Share this post


Link to post
Share on other sites

Failure with ATi FireGL T2 128mb (9600 Pro mobile equivilent) on an IBM T41p. System boots, but then cursor turns into a white line and screen is stuck on the grey loading screen with some coruption in the upper left corner (black squares, etc) System keeps loading and by all indications keeps running, display is just corupt.

Share this post


Link to post
Share on other sites

Could somebody host a backup of whatever was on Omni's site?

 

I've got a Radeon 9600, and so far people seem to have good results with it. Can't wait for 1680x1050!

Share this post


Link to post
Share on other sites

Takuro, we know you can NOT help yourself. ;)

 

so i'll remind you that omni does NOT want his site, or the files on his site mirrored. :)

Share this post


Link to post
Share on other sites

I was only aware that he didn't want his source code posted. I didn't know he was against the idea of posting the finished Alpha material too.

 

I was one of the ones telling others to be impatient up till now, but I guess I got caught up in the hype. ;)

 

Good work, Omni! Can't wait to see how this driver develops over time.

Share this post


Link to post
Share on other sites

there is the build 002.

omni have resolved some bugs.

I have tested with my mobility x1600 and Callisto driver recognize it!!

Only when I tried to change resolution ,my lcd get black screen.

Great omni,continue so! ;)

Share this post


Link to post
Share on other sites
It's up! Grab 002 release! ;)

 

 

It works with my X600Pro now, but I have to play with the timings a lot.

 

 

icon6.gif

Share this post


Link to post
Share on other sites

Almost works in x700, I get a lot of screen artifacts, only the center is more or less visible. How do you play with timings?

Share this post


Link to post
Share on other sites

Build 2 of the driver (build 1 didn't work)

 

Radeon Mobility 7500:

 

Chipset Model: Radeon Mobility 7500

Type: Display

Bus: PCI

VRAM (Total): 32 MB

Vendor: ATI (0x1002)

Device ID: 0x4c57

Revision ID: 0x0000

Displays:

Color LCD:

Resolution: 1024 x 768 @ 60 Hz

Depth: 32-bit Color

Core Image: Not Supported

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Not Supported

 

 

also:

 

VID: family specific matching fails

CallistoHAL Initialized!

Callisto: omni's ATI Driver&FrameBuffer, build 002, 07-May-2006

Callisto: Model Radeon Mobility 7500 (rs200)

Callisto: MMIO range@0x18 (c0100000) mapped to kernel virtual address 0x1e9c3000

Callisto: 32 MB DDR SGRAM found on 64 bit wide bus

Callisto: VRAM range@0x10 (e0000000:02000000)

Callisto: Found ROM @0xc0000

Callisto: Legacy ATI BIOS detected

Callisto: PLL values detected from Legacy BIOS: ref_clk=2700, ref_div=12, xclk=18300, min_freq=12000, max_freq=35000

Callisto: Found LVDS port, previously missing from the BIOS table, adding...

Callisto: Port[0] DDC: N/C, DAC: TVDAC, TMDS: Unknown, Connector: Proprietary

Callisto: Port[1] DDC: DDC_VGA, DAC: Primary, TMDS: Unknown, Connector: CRT

Callisto: Panel ID string: 1024x768

Callisto: Panel Size from BIOS: 1024x768

Callisto: (BIOS) FP: Hdisp=1024, Hblank=320, Hover_plus=16, HsyncWidth=136

Callisto: (BIOS) FP: Vdisp=768, Vblank=38, Vover_plus=2, VsyncWidth=6

Callisto: (BIOS) FP: Pixel Clock=65000

Callisto: Non-DDC laptop panel detected

Callisto: Found Monitor: LCD

Callisto: done with Radeon Mobility 7500

 

 

Cannot change resoulution (to 800x600 or 640x480 -> 1024 is my max :) ), the screem gets black.

 

GA plugin loaded and OpenGL working (Framework from 10.4.1) but as before no QE.

Share this post


Link to post
Share on other sites

I'm getting the same problem as rogabean, mmk, and the others. Except I don't have an ATi Radeon 9750, I have a Radeon 9600. It's really weird, because somebody with a 9600 with the device ID 4e50 had it working perfectly. Mine has a device ID of 4e51 and it fails to display the login window.

 

Same symptoms as the others. The mouse cursor pops up and becomes a white rectangle, and the login window never appears but you can hear the system running things.

 

It seems a fairly common enough problem to focus on for the next driver release. There must be something about our cards, even though the models are very different.

 

(ATi 9600. Device ID: 4e51. Connection type: DVI. Monitor: Dell 2005FPW)

Share this post


Link to post
Share on other sites

O.K. installed Build 2 of the driver on ATI 9200 mobility on 10.4.3

 

Driver loaded O.K. like build 1....more info displayed and

seems accurate except for the Card model # 9000 lf ?!

 

 

Radeon Mobility 9000 Lf:

 

Chipset Model: Radeon Mobility 9000 Lf

Type: Display

Bus: PCI

VRAM (Total): 32 MB

Vendor: ATI (0x1002)

Device ID: 0x4c66

Revision ID: 0x0001

Displays:

Color LCD:

Resolution: 1024 x 768 @ 60 Hz

Depth: 32-bit Color

Core Image: Not Supported

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Not Supported

 

 

This on laptop with 1280x800 native LCD

When trying to switch to 1280x800 from 1024x768,

The screen goes a bit out of sync or range and the

switching back works after a reboot....

The display used to go black with build 1, so this is an

improvement....

Your getting close guys.....

Thanks for all your efforts.....really.....

Share this post


Link to post
Share on other sites

ati radeon mibility 9000 (9100IGP U3)

 

built 002

WORK!!!!

i had to reboot after ajusting resolution but it work!!!!

still no QE (any hope about ci i think...) but finally i have 1280x800!!! finally safari icon is round

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×