Jump to content
marionez

Realtek ALC1200 ICH10 working kext on Yosemite 10.10 from 10.6+

579 posts in this topic

Recommended Posts

Hi i've installed the latest kext ALC1200_1063, everything works perfectly on my Asus P5Q-SE running 64bit kernel. But I recently bought the Toslink bracket for the mobo so I can get optical out to my audio receiver. It doesn't appear to work though, the spdif attached to the mobo works fine, but the brackets spdif and toslink don't work. Any ideas would this need me to mess with dsdt files? Thanks in advance

Share this post


Link to post
Share on other sites
Advertisement

I don't remember, I haven't optical out, I think there are no verbs and nodes in my dump about it, this is why it doesn't work I suppose... you should dump your alc1200 and then patch the driver in your specific way.

Share this post


Link to post
Share on other sites
I don't remember, I haven't optical out, I think there are no verbs and nodes in my dump about it, this is why it doesn't work I suppose... you should dump your alc1200 and then patch the driver in your specific way.

Thanks for getting back quick mate, are there any guides to patching the driver, also how do you dump the alc is there a mac side utility or do i need to run something in windows? Thanks

Share this post


Link to post
Share on other sites
[For P6T SE using Mac OS X 10.6.5]

 

I tried so many in this topic and have no luck.

 

Finally, i tried to use the original AppleHDA.kext from 10.6.2 and it's working now !

 

PS: Only AppleHDA.kext in S/L/E (no HDAEnable.kext)

 

Please lay out or send a link where you can download the original kext AppleHDA from 10.6.2 can be e-mail: sopka1@hotmail.com

Share this post


Link to post
Share on other sites

Hey Guys,

first I want to thank marionez and the whole board for this good work. Without you I haven't such a wonderful working Hackintosh. I have a Harman/Kardon receiver with USB in, and it's normally possible to play/pause or make next track via the remote. I'm using your patched Apple-HDA since 10.6.2 and first this feature worked like a charm.

But after a few weeks it stopped working. After "reinstall" the kext with kext-helper, it worked again most of the time.

But since 10.6.4 (or 10.6.5) it stopped completely working.

I know it's nothing very necessary and also very special, but maybe you have an idea, because you have changed someting in your patched kext or something like that.

Sorry for my bad english, i'm german.

Greetz, maui

Share this post


Link to post
Share on other sites

i dont know what to do !

 

i cant get the mic to work , i tried this file without success :D

 

can any one help me please ?

 

sound is working ok , but i really need the mic

 

i have 10.6.5 retail installed

[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] +hda enabler (ALC888 )

 

please help me !! :(

 

 

 

 

ASUS-P6T SE

ATI SAPPHIRE 5770 HD 1GB

i7 930 2.8 GHz

Share this post


Link to post
Share on other sites

Hello there, I am new into mac os project I have ASUS P5Q-EM and I can't get my sound to work with the latest kext from this thread although my Mainboard is Marked as "TESTED OK"

These are the Errors from console with the NonWorking Kext:

kernel Sound assertion ""Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state )"" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDAController/AppleHDAController.cpp" at line 4205 goto handler

kernel Sound assertion "0 != executeCodecCommand ( fCodecList[addr], command, &fCodecVendorProductIDArray[addr] )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDAController/AppleHDAController.cpp" at line 3549 goto Exit

kernel Sound assertion ""Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state )"" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDAController/AppleHDAController.cpp" at line 4205 goto handler

 

 

Does anyone have a clue about these Errors? And My hackintosh works well without any problems except the sound.

My Mainboard is ASUS P5Q-EM(like I said) And I use Snow Leopard 10.6.5.

Share this post


Link to post
Share on other sites

Please help make working 10.6.5 ApleHDA for Acer Aspire 5930 with ALC888S codec.

With VoodooHDA 2.7.2 output works, but the microphone does not work.

 

codec_0_Realtek_ALC888.zip - dump from Ubuntu 10.10 and from the installed MacOS 10.6.5 with VoodooHDA 2.7.2, from Windows pinconfig could not take, because do not exist in the registry.

DSDT.ZIP - my dsdt.

 

I'm already tired of experimenting, it does not work - help me please!

Share this post


Link to post
Share on other sites

hey all, could really use some help. I did my nl install using this guide p5q install, and everything works but sleep and of course, my sound. After I installed, I successfully updated to 10.6.5. Then I tried to get sound working but have had no luck. I have read this entire thread, and tried every kext combination, but I cannot get any sound to work. The closest I get is for Intel high Definition audio with ID:12 to be listed, which was mentioned several times in this thread, but never with a working solution. Please see the attachments below. Im at a loss unless sound is just not compatible with 10.6.5 and my pq5-em mobo. Rest of my specs are in signature. I saw a few people posted their dsdt.aml file (just rename from txt to aml), so I attached that as well. If someone can help, it would really be appreciated.

 

thanks all!

post-187945-1292463795_thumb.png

post-187945-1292463803_thumb.png

dsdt.txt

Share this post


Link to post
Share on other sites

I CAN NOT get this to work on my P6T SE as far as audio goes! I installed Snow Leopard 10.6.0 then ran the updates to 10.6.5 afterwards trying to install these kexts using kexthelper and other methods ALL DAY! Which file of the downloads listed on page 1 do I need and what is the step by step to get them into 10.6.5? Thanks ;). PS In system profiler I get "Audio ID: 12" currently.

Share this post


Link to post
Share on other sites
A fast way...

fireup your termial and digit:

sudo perl -pi -e 's|\x85\x08\xec\x10|\x88\x08\xec\x10|g' /System/Library/Extensions/AppleHDA.kext/Contents/MacOS/AppleHDA

Credits to aschar on projectosx.

 

Also I use this in my P6T SE (ALC1200)

        Device (HDEF)
       {
           Name (_ADR, 0x001B0000)
           Method (_DSM, 4, NotSerialized)
           {
               Store (Package (0x10)
                   {
                       "subsystem-id", 
                       Buffer (0x04)
                       {
                           0xA0, 0x00, 0x00, 0x00
                       }, 

                       "subsystem-vendor-id", 
                       Buffer (0x04)
                       {
                           0x6B, 0x10, 0x00, 0x00
                       }, 

                       "codec-id", 
                       Buffer (0x04)
                       {
                           0x88, 0x08, 0xEC, 0x10
                       }, 

                       "layout-id", 
                       Buffer (0x04)
                       {
                           0x0C, 0x00, 0x00, 0x00
                       }, 

                       "device-type", 
                       Buffer (0x08)
                       {
                           "ALC1200"
                       }, 

                       "model", 
                       Buffer (0x10)
                       {
                           "Realtek ALC1200"
                       }, 

                       "built-in", 
                       Buffer (One)
                       {
                           0x00
                       }, 

                       "PinConfigurations", 
                       Buffer (Zero) {}
                   }, Local0)
               DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
               Return (Local0)
           }
       }

 

OR SSDT version for new bootloader..

DefinitionBlock ("SSDT-4.aml", "SSDT", 1, "APPLE", "HDEF", 0x00001000)
{
   External (DTGP, MethodObj)    // 1 Arguments
   External (\_SB_.PCI0, DeviceObj)

   Scope (\_SB.PCI0)
   {
       Device (HDEF)
       {
           Name (_ADR, 0x001B0000)
           Method (_DSM, 4, NotSerialized)
           {
               Store (Package (0x10)
                   {
                       "subsystem-id", 
                       Buffer (0x04)
                       {
                           0xA0, 0x00, 0x00, 0x00
                       }, 

                       "subsystem-vendor-id", 
                       Buffer (0x04)
                       {
                           0x6B, 0x10, 0x00, 0x00
                       }, 

                       "codec-id", 
                       Buffer (0x04)
                       {
                           0x88, 0x08, 0xEC, 0x10
                       }, 

                       "layout-id", 
                       Buffer (0x04)
                       {
                           0x0C, 0x00, 0x00, 0x00
                       }, 

                       "device-type", 
                       Buffer (0x08)
                       {
                           "ALC1200"
                       }, 

                       "model", 
                       Buffer (0x10)
                       {
                           "Realtek ALC1200"
                       }, 

                       "built-in", 
                       Buffer (One)
                       {
                           0x00
                       }, 

                       "PinConfigurations", 
                       Buffer (Zero) {}
                   }, Local0)
               DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
               Return (Local0)
           }
       }
   }
}

 

Of course the Legacy in /Extra/Extensions/

 

Fabio

 

Edit

 

The P6T Deluxe have a AD2000b

 

 

Hi Fabio

 

I wanted to ask you. I have a working sound in stereo on Asus P6TSE using the AppleHDA kext. I am on 10.6.5 now. Will I be able to get 5.1 or 7.1 surround sound via analog connections using your method or does it only work with digital output. My surround sound system has 5.1 analog surround using 3 3.5 mm connectors which work brilliantly with windows installed on same system but only get 2 speakers output on mac.

 

Thanks

 

Jemmy

Share this post


Link to post
Share on other sites

I installed the kext in the 2nd method but no sound through the HDMI (using my TV for audio and monitor here...)

 

I'm using the Radeon 4830 on a P5Q Pro with ALC1200...Snow Leopard 10.6.5

 

Any suggestions?

Share this post


Link to post
Share on other sites

@tatesman: i made the update yesterday and sound is still working. the update hasn't overwritten the applehda.kext, so i needn't reinstall sound driver. in my case, sounds working better than before, because a little feature i missed is working again.

Share this post


Link to post
Share on other sites

Hi great driver. I have a P6T and was wondering if the rest of the 1/8 outs will be supported? I have surround sound speakers which need the 3 outs to directly play 5.1 sound.

 

Thanks

 

oq

Share this post


Link to post
Share on other sites
@tatesman: i made the update yesterday and sound is still working. the update hasn't overwritten the applehda.kext, so i needn't reinstall sound driver. in my case, sounds working better than before, because a little feature i missed is working again.

Thanks a lot!

 

I can confirm that the 1063 kext works fine on 10.6.6!

Share this post


Link to post
Share on other sites

Hey I just wanted to say great job, and keep up the great work!

 

But I have ALC1200, have tried both methods, and it will not work! :D

 

The sound finally shows up, but when I try to play any type of sound, no output happens...

 

Any ideas?

 

Thanks

Share this post


Link to post
Share on other sites
I installed the kext in the 2nd method but no sound through the HDMI (using my TV for audio and monitor here...)

 

I'm using the Radeon 4830 on a P5Q Pro with ALC1200...Snow Leopard 10.6.5

 

Any suggestions?

 

 

yes , your soundcard have nothing to do with that problem

 

when you connect HDMI cable its your graphic card that makes the sound (HD RADEON cards have a soundcard incorporated , in windows you can see that in sound properties)

 

try to fix your graphic card kext for a better one

Share this post


Link to post
Share on other sites

Can't figure out for the life of me whats wrong. I am getting the slider but no sound. Profiler says there is no hardware even though I can pick which port is used for output.

 

 

 

Using an ASUS M4A79 Deluxe. It also claims to be an ALC1200 on the ASUS site but in Windows DEV is 0888?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By bobso
      hi I have this build:
       
      - AMD Athlon X4 631
      - ASRock A75M-HVS (link)
      - AMD HD 6670
      - 8GB DDR3
      - 250GB HDD
       
      Which version of MacOS can I install?
      Which kernel?
    • By MaLd0n
      Now have a Olarila Folders app, just download app and clover folder for your Chipset! Download Folders.app     First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.MaLd0n GA H110M-S2.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI --FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Now have a Olarila Folders app, just download app and clover folder for your Chipset! Download Folders.app     Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover UEFI in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install Sierra and boot into system!   --Install Clover UEFI and replace with my folder  CLOVER POST INSTALLATION.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edit... Run it RunMe.app   --DSDT My DSDT DSDT.ASUS H61M-A MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -EHCx -LPC -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF Clear NVRAM, Purge and Kextcache
          --FakeSMC http://www.hwsensors.com/releases --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By MaLd0n
      Now have a Olarila Folders app, just download app and clover folder for your Chipset! Download Folders.app   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Youtube MacOS Install Guide 2018 - Mojave - HighSierra - Sierra - ElCapitan Mojave Full DSDT patch http://olarila.com/forum/viewtopic.php?f=59&t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By MaLd0n
      Now have a Olarila Folders app, just download app and clover folder for your Chipset! Download Folders.app     --Create a bootable copy of macOS Sierra   http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra   http://diskmakerx.com/   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder    CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder   CLOVER.zip   --Nvidia WebDriver Sierra   http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/   --Nvidia WebDriver High Sierra   http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/   --Cuda   http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   Now you need a fine tune!   --DSDT DSDT.GA H97M-D3H MaLd0n.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF --Power Management   Use "plugin-type"=1 in DSDT, SSDT or Clover config.plist   --Brightness   Install .app, select the required permission and reboot. Work in F1 / F2 keys! NativeDisplayBrightness.app.zip https://github.com/Bensge/NativeDisplayBrightness/releases *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install  
      --FakeSMC
        https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/   --Audio   https://github.com/vit9696/AppleALC   --USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   --LAN   http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!
×