Alex Freak Posted March 28, 2009 Share Posted March 28, 2009 Hi, first my Hardware: Mainboard: Asus P5QL-Pro, FSB1333, Intel P43 Chipset, SATA,PCI-E, GLAN Processor:Intel CORE2Quad Q6600-G0 Step, QUAD-Core,1066MHz, 8MB Kentsfield, 2.4GHz, VT, SpeedStep, I64bit, NX Memory: 4096MB DDR2 PC-6400, (2x1024MB), 240Pin, 800MHz. Harddisc: 500GB, SATA-II, Samsung or WD, 7200rpm, 16MB Graphiccard: nVidia 9500GT, 512MB DDR2, TV-Out, DVI Netwwork: Marvell® 88E8001 Gigabit Ethernet Controller 10/100/1000 DVD-Recorder: 20x DVDRW +/- R, +/-RW, 20A4H (20x DVDRW. 48x CDRW) Card-Reader: Yeong Yang 15-in-1, USB 2.0 I tried Kalyway (don't boot), iAtkos 5i 10.5.5 (Froze by "Using 16384 buffer headers and 4096 cluster IO buffer headers"), iPC 10.5.6 (Froze by "Using 16384 buffer headers and 4096 cluster IO buffer headers")... Could anyone describe me, how I can install it without these mistakes at my PC? And all Custom Options, that i must choose!!! I googled already more than 12 hours Please Help!!! Using 16384 buffer headers and 4096 cluster IO buffer headers hängen Have a nice day! Alex PS: Sorry for my bad english Link to comment Share on other sites More sharing options...
Zero21XX Posted March 29, 2009 Share Posted March 29, 2009 That is the same error I'm getting with my Core i7 setup, I can't seem to find a way around it. If I come across anything I will be sure yo let you know. Update: I googled the error and I found this: This is a well know error!!! Try searching Google for :" Using 16384 buffer headers and 4096 cluster insanelymac" It is a ACPIPlatform.kext error you have to replace it with a compatible one, or would you like one of us to come over and do it for you!? SticMAN Source= http://www.insanelymac.com/forum/index.php...st&p=872638 This seemed to work for the person he replied too so after I find one compatible with my setup I will be trying this. Best of luck to ya. Link to comment Share on other sites More sharing options...
Alex Freak Posted March 29, 2009 Author Share Posted March 29, 2009 Does anyone know, how do we can replace this strange "ACPIPlatform.kext" Have a nice day... Link to comment Share on other sites More sharing options...
bitstra Posted March 29, 2009 Share Posted March 29, 2009 Does anyone know, how do we can replace this strange "ACPIPlatform.kext" Have a nice day... Hi Alex, in IPC_10.5.6_Final - Install I've selected under 'Fixes' -> 'ACPIFix' to prevend against IOBuffers and Headers boot fail! That worked for me on the Asus eeeTop ET1602 with your described problem on the first try of install! regards bitstra Link to comment Share on other sites More sharing options...
Recommended Posts