smidge Posted January 22, 2009 Share Posted January 22, 2009 Hi All, My first hackintosh was a complete success (Dell Dimension 5150...) My second attempt is proving much more difficult The 10.5.2 Kalyway DVD i used for my first try will not even get this PC to the installer screen, it just reboots the computer randomly after about 5 minutes of text apprearing on he screen (thats using -x -v) I've done a ton of research and have now tried the IATKOS 10.5.5 DVD which gets me through the install process, i select what i THINK are the right settings but then once installed (sucessfully) the PC will not start and i get either a blank screen with a _ on it or a reboot loop... Here are the specs, Asus P4C800-E Deluxe Pentium 4 3ghz 1gig Ram 120gb SATA Hard Disk Samsung IDE DVD-RW USB keyboard and mouse I've read hundreds of forum posts over the last few days trying to relate to my setup but haven't had any luck, i'll worry about tweaking graphics lan and sound once i can actually get the thing running properly any advice would be great as i'm sure this machine is capable of hackintosh-ness! Link to comment https://www.insanelymac.com/forum/topic/148459-asus-p4c800-e-deluxe-iatkos-1055-broken-now-works/ Share on other sites More sharing options...
smidge Posted January 22, 2009 Author Share Posted January 22, 2009 this is the last thing i get on the screen before it bombs using the Kalyway 10.5.2 DVD.. Link to comment https://www.insanelymac.com/forum/topic/148459-asus-p4c800-e-deluxe-iatkos-1055-broken-now-works/#findComment-1051043 Share on other sites More sharing options...
smidge Posted January 23, 2009 Author Share Posted January 23, 2009 well after a whole lot more stuffing around ive made some progress... turns out the biggest problem and what was messing up my isntall and boot were the SATA drives.. i disconnected both and plugged in an old WD40gb ide drive i had lying around and on my second attempt i have a sucessful mac os install! boots up no issues, did the sign in stuff and all is well what doesn't work: LAN - and i dont know where to start to get the right Kext for it, the website for my mobo says its a Intel CSA LAN controller or something... is there a way to get better info and this or where to find the appropraite controller? this is more important than audio or whatever else, the graphics are okay, haven't experimented with anything as its an older 5xxx Nvidia card settings i used to get it to work were: EFI Voodoo Disable Remove Power Remove Thermal Graphics update nvidia nvinject didn't install lan at startup as i had no idea which one to choose, figuring i could do it later, but having trouble finding the right info anyone got any clues? Link to comment https://www.insanelymac.com/forum/topic/148459-asus-p4c800-e-deluxe-iatkos-1055-broken-now-works/#findComment-1052486 Share on other sites More sharing options...
yfyfyf Posted January 30, 2009 Share Posted January 30, 2009 hello mate, you are using an intel 82547EI lan controller.... I am having some problems with this board too, what BIO ver. are you using??? Link to comment https://www.insanelymac.com/forum/topic/148459-asus-p4c800-e-deluxe-iatkos-1055-broken-now-works/#findComment-1061928 Share on other sites More sharing options...
Mustang Sally Posted January 30, 2009 Share Posted January 30, 2009 I successfully installed iPC OSX86 PPF5 on my P4C800 Deluxe. I had tried the install before using Kallyway 10.5.2 last July and although it would install it would not reboot. Then after reading that if it installs and doesn't reboot means the machine is supported but you need to find the right combo. I installed the bare minimum and ran install over again with everything de selected except for the kext that I thought I would need. I found a kext for the onboard lan for the 3com 3C940 controller somewhere here. Only took 2 tries and I finally made it to the desktop. P4 3.0 ghz, P4C800 dlx., 2*512 ddr, AGP ATI X800 XL (default vga resolution) with IDE DVD and 80 GB IDE. used the voodoo kernel. runs not too bad. working with my Audigy soundcard, only need a $50.00 video card to be 100%. new life for my old P4 Link to comment https://www.insanelymac.com/forum/topic/148459-asus-p4c800-e-deluxe-iatkos-1055-broken-now-works/#findComment-1062726 Share on other sites More sharing options...
smidge Posted January 31, 2009 Author Share Posted January 31, 2009 i upgraded to the latest beta bios from the asus website i haven't been able to get lan working properly its the intel CRD gigabit ethernet or something, no audio either but i've forgotten where to find the Kexts for all of its its been so long since i made a hackie video is fine however! Link to comment https://www.insanelymac.com/forum/topic/148459-asus-p4c800-e-deluxe-iatkos-1055-broken-now-works/#findComment-1063008 Share on other sites More sharing options...
smidge Posted February 12, 2009 Author Share Posted February 12, 2009 got my audio working with the standard intel AC97 audio driver thats kicking around the place here am going to try and upgrade to 10.5.6 so i can run (or at least try to) ilife 09 that i just bought will let everyone know how i go! no luck with the internal network card, ended up using an old netgear card i had lying around, its a little slow but it seems to work okay going to back up the whole system onto another drive so if it all goes to poo i can at least go back to my stable and working 10.5.5 install which i'm posting from right now Link to comment https://www.insanelymac.com/forum/topic/148459-asus-p4c800-e-deluxe-iatkos-1055-broken-now-works/#findComment-1078014 Share on other sites More sharing options...
Recommended Posts