Issues with iDeneb. Kernel panic after install.

[Waste]

Later I've been messing about with iDeneb to see if I could get OSX working again on my PC.

Install works fine and everything goes through, but after I restart I have issues with a kernel panic that gives (I assume) the same error each time.

 

The error is (Not the full error, just the most pertinent information to the best of my knowledge.):

Kernel trap at 0x2e15d9f8, type 14 = page fault (It then list the registers which seem to be the areas of memory that have errored.)

 

(Further down)

com.apple.driver.AppleIntelCPUPowerManagement(9.32.2)@2e15c000->0x2c175fff

 

If any more info is needed on the error please let me know and I will copy down what is needed to discover the error.

 

Now, my PC specs:

AMD Athlon FX-55 @ 2.6Ghz (Socket 939)

2GBs PC3200 DDR memory

Winfast (Foxconn) NF4UK8AA Motherboard with the NForce 4 Ultra Chipset (GbE LAN Onboard)

ASUS 8600GT Nvidia card with 512MBs RAM

3 x IDE Hard disks (No SATA to worry about. )

 

 

I've tried all of the kernels on the disk in case the version I installed was the problem. (To no avail.)

Gave some different versions of the LAN drivers a try as well.

If it's needed I can go to the install and list all the drivers I used exactly if those could be the problem.

 

Thanks for any help given.

 

EDIT: Forgot to mention I tried searching the web for this error but I got no results. I fail at searching errors like this so if it's an easily solved problem I apologize for taking your time.'

EDIT #2: Added a photo of the error.

[Waste]

Bump for additions to the info.

[Waste]

Bump.