Jump to content
7 posts in this topic

Recommended Posts

Si es posible, te "pego" la guía que ha hecho Pere, que es válida porque yo la he seguido y funciona...el único problema es que está en inglés...pero es fácil de entender...

 

"If you want to use a usb flash disk as installing media, use this method:

(Osx required)

If you have already the iso on your hard disk, do as follow:

 

Insert the Flash disk and go to disk utility, select the flash disk and click on the tab "partition", select two partitions, one 3gb for the install disk, another for tools storage. Click on options button and be sure it´s set as MBR partition type, format the first partition as Mac os journaled (HFS+) and the second as MS-DOS (fat) so it will be avaliable for other OS.

 

Once you have partitioned and formatted, click on the restore tab, selec the iso as source and drag the first partition of your pendrive as destination. Click restore

 

Once finished you have to install the chameleon bootloader in order to boot.

 

Execute it, and select as destination your usb flash disk first partition (The one that contains the install dvd)

Once it finish, you can reboot and tell your bios to boot from usb, then you will be able to boot and install from the usb much more faster than the dvd. icon_smile.gif

 

If you dont have the iso on your system, insert the dvd, go to disk utilities, select the dvd once you are inside disk utilities and go to file>new>disk image from DisXsX (this should be your dvd)

In the create image options select:

Format: CD/DVD master

Encryption: none

 

Once it finish, you will have the dmg file (same as iso) and you can proceed with the first step."

 

Creo que es fácil, muy fácil.

Gracias Pere

 

jose_smooth

he probado de iniciar el installer desde un pendrive de 8gb (desde dvd ideneb y aplicando chameleon)y cuando "inicia" me sale el siguiente error:

 

 

post-330909-1228994662_thumb.jpgpost-330909-1228994695_thumb.jpg

 

 

mi pc es un portatil acer modelo travelmate 7514WSMI

 

cpu: amd turion 64x2 tl-56 (1.8GHz, 2x514kb L2 cache)

ram: 2gb ddr2

grafica: NVIDIA GeForce Go 7600

HDD: 160Gb SATA

wifi: Adaptador de red Broadcom 802.11g

red:NVIDIA nForce Networking Controller

controlador ide: Controladora estándar PCI IDE de doble canal

controlador ide:NVIDIA nForce 430/410 Serial ATA Controller

controlador usb: nVIDIA nForce 430 (MCP51) - OHCI USB 1.1 Controller

controlador usb: nVIDIA nForce 430 (MCP51) - EHCI USB 2.0 Controller

chipset placa base: nVIDIA GeForce Go 6100, AMD Hammer

Soporta istrucciones SSE, SSE2 y SSE3

 

no se si me olvido alguna cosa...

 

PD: tampoco me arranca desde el dvd de ideneb ni leo4all...

 

gracias

formatee como mbr y no arrancaba, luego le instale el chameleon y si arrancó, aunque no me inicia el installer y me sale el error ese de la captura...

 

La segunda particion solo es para poder utilizarlo en windows, no tiene otra utilidad. Al menos en lo que a instalar leopard se refiere.

 

PD: Que diferencia hay entre la particion mbr (jornaled) o guid?

×
×
  • Create New...