Installing Serialized Software

[LouCioccio]

I just finished building my hackintosh. I used Kalyway and instructions from this site. I am now re-installing my software. What works and took the legit software serial numbers. Adobe PSE 6 and Final Cut Express HD took their numbers and work. iLife08 works, I am having a problem with Olympus Studio Software. I have installed Studio 1.0 and updated that to 1.51. This took a serial number and that had no problems. The upgrade software is Studio 2 by Olympus and they (Olympus gave me a serial number) which worked in my G5. I then tried to instal in the hackintosh and I get wrong serial number. Now the odd thing is previous install of Kalyway I failed in reading the instruction along the way to upgrade as I was tweaking the system. In one of those installs I was able to get Oly Studio 2 to work. It was during the 10.5.5 update that the update froze and I tried the instructions here on the hpet error but could not resolve. When I did re-install Kalyway this is the problem I am getting with Olympus Studio 2 software. I tried changing some kext files but I am still encountering the problem. My guess it is software related. Any ideas to look for. I did look into logs but nothing stuck out as usual.

 

Ciao,

Lou Cioccio

[LouCioccio]

P5W DH deluxe mother board

E4400 Core 2 Duo

4GB RAM

500GB SATA Drive

Pioneer 109

Kalyway 10.5.5

Below is what happen from console when I try to install Studio 2 from Olympus it will not take the serial number.

All other software that has sn i.e. Adobe PSE6, FCE HD, Cocktail, Pacifist no problem.

Any help or guidance is most appreciated.

Lou Cioccio

 

10/27/08 3:25:22 PM kernel Finder[136] Unable to clear quarantine `OLYMPUS Studio 2.mpkg': 30

10/27/08 3:25:22 PM Installer[160] @(#)PROGRAM:Install PROJECT:Install-384.1

 

10/27/08 3:25:22 PM Installer[160] @(#)PROGRAM:Installer PROJECT:Installer-281

 

10/27/08 3:25:22 PM Installer[160] Hardware: Mac Pro @ 2.00 GHz (x 2), 4096 MB RAM

10/27/08 3:25:22 PM Installer[160] Running OS Build: Mac OS X 10.5.5 (9F33)

10/27/08 3:25:22 PM Installer[160] OLYMPUS Studio 2 Installation Log

10/27/08 3:25:22 PM Installer[160] Opened from: /Volumes/OLYMPUS Studio 2 Setup/OLYMPUS Studio 2.mpkg

10/27/08 3:25:24 PM Installer[160] Package Authoring Warning: OS2EnglishDocs.pkg authorization level is AdminAuthorization but was promoted to RootAuthorization for compatibility, ensure authorization level is sufficient to install.

10/27/08 3:25:24 PM Installer[160] Package Authoring Warning: OLYMPUS Studio 2.mpkg authorization level is NoAuthorization but was promoted to RootAuthorization for compatibility, ensure authorization level is sufficient to install.

10/27/08 3:25:24 PM Installer[160] Package Authoring Warning: OS2Application.pkg authorization level is AdminAuthorization but was promoted to RootAuthorization for compatibility, ensure authorization level is sufficient to install.

10/27/08 3:25:26 PM installdb[179] Opened receipt database on '/' with schema 17.

10/27/08 3:25:31 PM Installer[160] <ZeroSliderSplitView: 0x8d4020>: the delegate <TargetSelectPage: 0x8f9060> was sent -splitView:resizeSubviewsWithOldSize: and left the subview frames in an inconsistent state:

10/27/08 3:25:31 PM Installer[160] Split view bounds: {{0, 0}, {402, 104}}

10/27/08 3:25:31 PM Installer[160] Subview frame: {{0, 0}, {0, 32}}

10/27/08 3:25:31 PM Installer[160] Subview frame: {{0, 0}, {402, 104}}

10/27/08 3:25:31 PM Installer[160] The outer edges of the subview frames are supposed to line up with the split view's bounds' edges. NSSplitView is working around the problem, perhaps at the cost of more redrawing. (This message is only logged once per NSSplitView.)

10/27/08 3:25:50 PM Installer[160] ================================================================================

10/27/08 3:25:50 PM Installer[160] User picked Custom Install

10/27/08 3:25:50 PM Installer[160] Choices selected for installation:

10/27/08 3:25:50 PM Installer[160] Install: "OLYMPUS Studio 2"

10/27/08 3:25:50 PM Installer[160] Install: "OLYMPUS Studio 2"

10/27/08 3:25:50 PM Installer[160] Install: "OS2EnglishDocs"

10/27/08 3:25:50 PM Installer[160] Install: "OlympusDSCSCSIDriver"

10/27/08 3:25:50 PM Installer[160] ================================================================================

10/27/08 3:25:50 PM installdb[184] Opened receipt database on '/' with schema 17.

10/27/08 3:25:50 PM Installer[160] Preparing volume "Leopard" for installation

10/27/08 3:25:50 PM Installer[160] Configuring volume "Leopard"

10/27/08 3:25:51 PM Installer[160] Free space on "Leopard": 436 GB (468672040960 bytes).

10/27/08 3:25:51 PM Installer[160] Create temporary directory "/private/tmp/OLYMPUS Studio 2.mpkg.160IQqltx"

10/27/08 3:25:51 PM Installer[160] Assembling temporary receipt for OLYMPUS Studio 2

10/27/08 3:25:51 PM Installer[160] Processing OLYMPUS Studio 2:

10/27/08 3:25:51 PM Installer[160] Determining files to install

10/27/08 3:25:51 PM Installer[160] Configuring deferred files

10/27/08 3:25:51 PM Installer[160] Assembling temporary receipt

10/27/08 3:25:51 PM Installer[160] Performing pre-extraction actions

10/27/08 3:25:51 PM Installer[160] Creating destination path

10/27/08 3:25:51 PM Installer[160] Validating package payload

10/27/08 3:25:51 PM Installer[160] Starting file extraction

10/27/08 3:25:57 PM Installer[160] run postinstall script for OLYMPUS Studio 2

10/27/08 3:25:58 PM Installer[160] Performing post-extraction actions

10/27/08 3:25:58 PM Installer[160] Finishing receipt

10/27/08 3:25:58 PM Installer[160] Processing OS2EnglishDocs:

10/27/08 3:25:58 PM Installer[160] Determining files to install

10/27/08 3:25:58 PM Installer[160] Configuring deferred files

10/27/08 3:25:58 PM Installer[160] Assembling temporary receipt

10/27/08 3:25:58 PM Installer[160] Performing pre-extraction actions

10/27/08 3:25:58 PM Installer[160] Creating destination path

10/27/08 3:25:58 PM Installer[160] Validating package payload

10/27/08 3:25:58 PM Installer[160] Starting file extraction

10/27/08 3:25:58 PM Installer[160] Performing post-extraction actions

10/27/08 3:25:58 PM Installer[160] Finishing receipt

10/27/08 3:25:58 PM Installer[160] Processing OlympusDSCSCSIDriver:

10/27/08 3:25:58 PM Installer[160] Determining files to install

10/27/08 3:25:58 PM Installer[160] Configuring deferred files

10/27/08 3:25:58 PM Installer[160] Assembling temporary receipt

10/27/08 3:25:58 PM Installer[160] Performing pre-extraction actions

10/27/08 3:25:58 PM Installer[160] run preinstall script for OlympusDSCSCSIDriver

10/27/08 3:25:58 PM Installer[160] Creating destination path

10/27/08 3:25:58 PM Installer[160] Validating package payload

10/27/08 3:25:58 PM Installer[160] Starting file extraction

10/27/08 3:25:59 PM Installer[160] run postinstall script for OlympusDSCSCSIDriver

10/27/08 3:25:59 PM Installer[160] Performing post-extraction actions

10/27/08 3:25:59 PM Installer[160] Finishing receipt

10/27/08 3:25:59 PM Installer[160] run postinstall script for OLYMPUS Studio 2

10/27/08 3:25:59 PM Installer[160] Removing temporary directory "/private/tmp/OLYMPUS Studio 2.mpkg.160IQqltx"

10/27/08 3:25:59 PM Installer[160] Finalize disk "Leopard"

10/27/08 3:25:59 PM Installer[160] Notifying system of updated components

10/27/08 3:26:00 PM Installer[160] **** Summary Information ****

10/27/08 3:26:00 PM Installer[160] Operation Elapsed time

10/27/08 3:26:00 PM Installer[160] -----------------------------

10/27/08 3:26:00 PM Installer[160] extract 6.81 seconds

10/27/08 3:26:00 PM Installer[160] zero 0.02 seconds

10/27/08 3:26:00 PM Installer[160] install 7.82 seconds

10/27/08 3:26:00 PM Installer[160] validate 0.00 seconds

10/27/08 3:26:00 PM Installer[160] os 0.00 seconds

10/27/08 3:26:00 PM Installer[160] script 0.68 seconds

10/27/08 3:26:00 PM Installer[160] receipt 0.54 seconds

10/27/08 3:26:00 PM Installer[160] disk 1.01 seconds

10/27/08 3:26:00 PM Installer[160] config 0.15 seconds

10/27/08 3:26:00 PM Installer[160] Finalizing installation.

10/27/08 3:26:00 PM Installer[160] Registering applications

10/27/08 3:26:00 PM Installer[160] IFDInstallController 858740 state = 5

10/27/08 3:26:00 PM Installer[160] Displaying 'Install Succeeded' UI.

10/27/08 3:26:08 PM kernel Resetting IOCatalogue.

10/27/08 3:26:08 PM kextd[10] 0 cached, 421 uncached personalities to catalog

10/27/08 3:26:17 PM Installer[160] OLYMPUS Studio 2 Patch Installation Log

10/27/08 3:26:17 PM Installer[160] Opened from: /Volumes/OS2_Pack_Studio_ENU_2_1_2/OS2_Pack_Studio_ENU_2_1_2.pkg

10/27/08 3:26:19 PM installdb[263] Opened receipt database on '/' with schema 17.

10/27/08 3:26:25 PM Installer[160] ================================================================================

10/27/08 3:26:25 PM Installer[160] User picked Standard Install

10/27/08 3:26:25 PM Installer[160] Choices selected for installation:

10/27/08 3:26:25 PM Installer[160] Upgrade: "OLYMPUS Studio 2 Patch"

10/27/08 3:26:25 PM Installer[160] ================================================================================

10/27/08 3:26:25 PM com.apple.launchd[1] (com.apple.installdb.system) Throttling respawn: Will start in 4 seconds

10/27/08 3:26:29 PM installdb[265] Opened receipt database on '/' with schema 17.

10/27/08 3:26:29 PM Installer[160] Preparing volume "Leopard" for installation

10/27/08 3:26:29 PM Installer[160] Configuring volume "Leopard"

10/27/08 3:26:29 PM Installer[160] Free space on "Leopard": 436 GB (468536709120 bytes).

10/27/08 3:26:29 PM Installer[160] Create temporary directory "/private/tmp/OS2_Pack_Studio_ENU_2_1_2.pkg.160g6R35b"

10/27/08 3:26:29 PM Installer[160] Processing OLYMPUS Studio 2 Patch:

10/27/08 3:26:29 PM Installer[160] Determining files to install

10/27/08 3:26:29 PM Installer[160] Configuring deferred files

10/27/08 3:26:29 PM Installer[160] Determining obsolete files

10/27/08 3:26:29 PM Installer[160] Assembling temporary receipt

10/27/08 3:26:29 PM Installer[160] Performing pre-extraction actions

10/27/08 3:26:29 PM Installer[160] Removing obsoleted files

10/27/08 3:26:29 PM Installer[160] Creating destination path

10/27/08 3:26:29 PM Installer[160] Validating package payload

10/27/08 3:26:29 PM Installer[160] Starting file extraction

10/27/08 3:26:35 PM runner[181] pkgExtractor[267]: pkgExtractor: Ignoring invalid resource fork length for /Applications//OLYMPUS Studio 2

10/27/08 3:26:35 PM Installer[160] run postupgrade script for OLYMPUS Studio 2 Patch

10/27/08 3:26:36 PM Installer[160] Performing post-extraction actions

10/27/08 3:26:36 PM Installer[160] Finishing receipt

10/27/08 3:26:36 PM Installer[160] Removing temporary directory "/private/tmp/OS2_Pack_Studio_ENU_2_1_2.pkg.160g6R35b"

10/27/08 3:26:36 PM Installer[160] Finalize disk "Leopard"

10/27/08 3:26:36 PM Installer[160] Notifying system of updated components

10/27/08 3:26:36 PM Installer[160] **** Summary Information ****

10/27/08 3:26:36 PM Installer[160] Operation Elapsed time

10/27/08 3:26:36 PM Installer[160] -----------------------------

10/27/08 3:26:36 PM Installer[160] extract 5.89 seconds

10/27/08 3:26:36 PM Installer[160] zero 0.00 seconds

10/27/08 3:26:36 PM Installer[160] install 6.76 seconds

10/27/08 3:26:36 PM Installer[160] validate 0.00 seconds

10/27/08 3:26:36 PM Installer[160] os 0.00 seconds

10/27/08 3:26:36 PM Installer[160] script 0.37 seconds

10/27/08 3:26:36 PM Installer[160] receipt 0.20 seconds

10/27/08 3:26:36 PM Installer[160] disk 0.01 seconds

10/27/08 3:26:36 PM Installer[160] config 0.28 seconds

10/27/08 3:26:36 PM Installer[160] Finalizing installation.

10/27/08 3:26:36 PM Installer[160] Registering applications

10/27/08 3:26:36 PM Installer[160] IFDInstallController 3A94E0D0 state = 5

10/27/08 3:26:36 PM Installer[160] Displaying 'Install Succeeded' UI.

10/27/08 3:26:41 PM loginwindow[45] DEAD_PROCESS: 0 console

10/27/08 3:26:41 PM shutdown[288] reboot by lcioccio:

10/27/08 3:26:41 PM shutdown[288] SHUTDOWN_TIME: 1225135601 331732

10/27/08 3:26:41 PM com.apple.loginwindow[45] Shutdown NOW!

10/27/08 3:26:41 PM mDNSResponder mDNSResponder-176.2 (Aug 15 2008 14:58:54)[16] stopping

10/27/08 3:26:41 PM com.apple.loginwindow[45] System shutdown time has arrived

10/27/08 3:29:07 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist

10/27/08 3:29:07 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight

10/27/08 3:29:07 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight

10/27/08 3:29:08 PM kernel rtitionScheme/Untitled@2

10/27/08 3:29:07 PM DirectoryService[11] Launched version 5.5 (v514.23)

10/27/08 3:29:08 PM kernel BSD root: disk0s2, major 14, minor 2

10/27/08 3:29:08 PM kernel USBF: 5.661 AppleUSBOHCI[0x638d000]::CheckSleepCapability - OHCI controller will be unloaded across sleep

10/27/08 3:29:08 PM kernel Jettisoning kernel linker.

10/27/08 3:29:08 PM kernel Resetting IOCatalogue.

10/27/08 3:29:08 PM kernel display: family specific matching fails

10/27/08 3:29:08 PM kernel Matching service count = 1

10/27/08 3:29:08 PM kernel Matching service count = 2

10/27/08 3:29:08 PM mDNSResponder mDNSResponder-176.2 (Aug 15 2008 14:58:54)[16] starting

10/27/08 3:29:08 PM kernel Matching service count = 2

10/27/08 3:29:08 PM kernel Matching service count = 2

10/27/08 3:29:08 PM kernel Matching service count = 2

10/27/08 3:29:08 PM kernel Matching service count = 2

10/27/08 3:29:08 PM kextd[10] 421 cached, 0 uncached personalities to catalog

10/27/08 3:29:08 PM com.apple.SecurityServer[21] Entering service

10/27/08 3:29:08 PM configd[14] setting hostname to "louis-cioccios-mac-pro.local"

10/27/08 3:29:10 PM kernel Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1

10/27/08 3:29:10 PM kernel Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200

10/27/08 3:29:10 PM kernel NVDANV50HAL loaded and registered.

10/27/08 3:29:10 PM kernel display: family specific matching fails

10/27/08 3:29:10 PM kernel ALCinject: Starting.

10/27/08 3:29:10 PM kernel ALCinject: Setting layout-id=<data not shown>

10/27/08 3:29:10 PM kernel ALCinject: Setting PinConfigurations=<data not shown>

10/27/08 3:29:10 PM kernel display: family specific matching fails

10/27/08 3:29:10 PM kernel display: family specific matching fails

10/27/08 3:29:10 PM kernel dsmos: Initializing...

10/27/08 3:29:10 PM kernel dsmos: Hook and decryption contexts set!

10/27/08 3:29:10 PM kernel dsmos: Starting...

10/27/08 3:29:10 PM kernel yukon: Ethernet address 00:18:f3:ab:81:f0

10/27/08 3:29:10 PM fseventsd[50] event logs in /.fseventsd out of sync with volume. destroying old logs. (105 7 149)

10/27/08 3:29:10 PM fseventsd[50] log dir: /.fseventsd getting new uuid: BDC145D0-14D8-43EA-876E-793FC2797A08

10/27/08 3:29:11 PM bootlog[57] BOOT_TIME: 1225135742 0

10/27/08 3:29:11 PM rpc.statd[42] statd.notify - no notifications needed

10/27/08 3:29:11 PM kernel AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0

10/27/08 3:29:12 PM org.ntp.ntpd[39] Error : nodename nor servname provided, or not known

10/27/08 3:29:12 PM ntpdate[67] can't find host time.apple.com

 

10/27/08 3:29:12 PM ntpdate[67] no servers can be used, exiting

10/27/08 3:29:12 PM ntpd[39] bind() fd 25, family 30, port 123, scope 4, addr fe80::218:f3ff:feab:81f0, in6_is_addr_multicast=0 flags=17 fails: Can't assign requested address

10/27/08 3:29:12 PM /usr/sbin/ocspd[72] starting

10/27/08 3:29:12 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[45] Login Window Application Started

10/27/08 3:29:18 PM loginwindow[45] Login Window Started Security Agent

10/27/08 3:29:18 PM SecurityAgent[86] User info context values set for lcioccio

10/27/08 3:29:18 PM SecurityAgent[86] Login Window done

10/27/08 3:29:18 PM loginwindow[45] Login Window - Returned from Security Agent

10/27/08 3:29:18 PM loginwindow[45] USER_PROCESS: 45 console

10/27/08 3:29:19 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[82]) Exited: Terminated

10/27/08 3:29:19 PM /System/Library/CoreServices/coreservicesd[69] SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Louis Cioccio's Public Folder) returned -14135

10/27/08 3:29:20 PM kextd[10] writing kernel link data to /var/run/mach.sym

10/27/08 3:29:49 PM OLYMPUS Studio 2[115] *** -[NSCFData _fastCharacterContents]: unrecognized selector sent to instance 0x16a18570

10/27/08 3:29:49 PM OLYMPUS Studio 2[115] Exception raised during posting of notification. Ignored. exception: '*** -[NSCFData _fastCharacterContents]: unrecognized selector sent to instance 0x16a18570' invoked observer method: '*** -[CMAppController applicationDidFinishLaunching:]' observer: 0x1029210 notification name: 'NSApplicationDidFinishLaunchingNotification'

10/27/08 3:30:28 PM OLYMPUS Studio 2[120] *** -[NSCFData _fastCharacterContents]: unrecognized selector sent to instance 0x190eb7b0

10/27/08 3:30:28 PM OLYMPUS Studio 2[120] Exception raised during posting of notification. Ignored. exception: '*** -[NSCFData _fastCharacterContents]: unrecognized selector sent to instance 0x190eb7b0' invoked observer method: '*** -[CMAppController applicationDidFinishLaunching:]' observer: 0x102ddf0 notification name: 'NSApplicationDidFinishLaunchingNotification'

10/27/08 3:30:36 PM OLYMPUS Studio 2[120] *** -[NSCFData _fastCharacterContents]: unrecognized selector sent to instance 0x18b9ee90

10/27/08 3:30:36 PM OLYMPUS Studio 2[120] *** -[NSCFData _fastCharacterContents]: unrecognized selector sent to instance 0x18b9ee90

10/27/08 3:33:55 PM ntpd[39] time reset +0.316921 s

[LouCioccio]

This one particular software which I like to use on my G5 which enables either my E1 or E500 to work tethered.

This time I erased the drive and re-installed the kalway DVD for 10.5.1. I then downloaded the Apples updates from .2 to .5 and installed them individually. Along the way I don't know which update I lost my sound and at the last (.5) I got some errors but it went to the desktop. Naturally I repaired permissions rebooted in single user mode fsck and then booted again; same errors. Apple System Profiler is wrong now and I have no sound. So now I install the Studio 2 software from Olympus and it takes the serial number. Now i am at work so tomorrow I will see if it will work with the camera tethered and install the other software that has serials to see if they work.

 

Stay tuned.

 

Ciao,

Lou Cioccio

[LouCioccio]

Okay I was able to install Olympus Studio 2. It took the serial number and I can shoot tethered with the E1 either at the camera or at the computer. Update works. I then tried a different version of AppleSMBIOS.kext to see if that was the problem. It was. I could not get past the opening dialog screen of Studio. I did note that in -v mode there was an error on the Olympus camera plugin. So I put the apple AppleSMBIOS.kext file back in.

ASP (Apple SYstem Profiler) has an error reading the hard ware. The About This Mac incorrectly list the processor speed at 3.8 Ghz but the rest is correct an Intel Core 2 Duo and ram is right at 4GB but 0 speed.

Just finished loading PSE6, iLife08, FCE_HD so I will see how these work.

 

Ciao,

Lou Cioccio

[LouCioccio]

Every thing seems to work. I was able to use iPhoto and Final Cut Express even made a short slide show with effects. So I think its working okay. So I am going on the assumption Apple System Profiler is more cosmetic. If I run Activity I see dual CPU's and they are working.

 

Ciao,

Lou Cioccio

[gizmoarena]

Question number 1: What is serialized software?

[LouCioccio]

Software that takes a serial number. Examples like Photoshop, Cocktail even Pacifist. The numbers unlock the software. I did get some help from Olympus but I did not tell them I was using a "hackintosh". I imagine I have broken some software laws down the road. What I don't understand is how AppleSMBIOS.kext files reads the the system and what effect it had on the Olympus Studio 2 not taking the serial number. I think it creates a number to check that its legal some what like Adobe and Windows so you can finalize the software install. So something must be broken. The system seems to be working.

 

Ciao,

Lou Cioccio

[gizmoarena]

I don't think the problem is related to AppleSMBIOS. If the program doubts if it is a real mac, the program wouldn't run at all.

I have no idea about the Olympus' software. So cannot suggest you anything right now.

 

But just in case, use netkas AppleSMBIOS and see what happens.

 

Or, check out if there's a cracked version of your software.

 

best of luck.

 

PS. Don't call them serialized software.

[LouCioccio]

Thanks. I dl'd the SMBIOS file and it worked. At first I did not think it would as I started Olympus Studio it asked for the serial number again. I entered the serial number hit okay, a pause I thought it was going to come up as "wrong serial" number but NO, it took it.

 

I have 4 different AppleSMBIOS.kext files (I color coded them) in different subfolders. I used Kext Helper to install it. I had used the other files and Studio was the one that balked. Final Cut Express, PSE6 never gave me any problems. So Studio must be odd. Anyway About this Mac identifies the computer as an iMac and shows everything correctly. I had used the Kalyway one that identified it as a MacPro but like I said Studio would not take the serial number.

 

The only new mac I ever bought was a G4 in 2000 and before that I had a Starmax 3000 clone. I just gave that one away to someone who Power Computing Clone bit the dust. I was able to swap her original drive plus gave her another drive and cd-writer that she did not have. I just got a used G5 last year. The hackintosh way was better money wise and is upgradeable like the G5 but MORE so.

 

Thank You

[gizmoarena]

Glad to help you.

[Blabberlicious]

Glad to help you.

 

 

Would anyone care to help a starving photographer obtain a means of using the mac Olympus Master 2 software?

 

I simply can't run to the €90 they want for something that should be free.

 

Adobe already has all my money!

 

Any help greatly appreciated.

[Blabberlicious]

Any help greatly appreciated.

 

 

Bumpity Bump?