Jump to content

So close to installation, need help.


Edgar7
 Share

2 posts in this topic

Recommended Posts

Hi, I'm trying to get Kalyway 10.5.2 installed on my PC specs are.

 

Intel E8400 at 3.6Ghz

4GB GSkill DDR2 1066 RAM

DFI BloodIron Motherboard Pe35-TR2L

Sapphire ATI Radeon 4850

160GB WD HD

640GB WD HD

 

Okay so I have Vista installed on the 160GB HD, and on the other one I just got yesterday I transfered over about 100GB of stuff and the rest is empty. Using Acronis Disk Director I partioned the drive and made a 25GB partition to the 640GB for Mac. I run the disk everything works fine, I reformat the partition to mac extended (journal) it installs perfectly. It then says it has to reboot to finish the installation. Well I currently had my 160GB with Vista as the first boot disk, so I went into BIOS and set the 640GB to boot first instead, but whenever it tries to boot I get a HFS+ Error. I heard this has to do with Vista being on the machine, but since Vista isn't on the 640GB how is this possible, there is a large 500GB partition formatted by Vista, but not vista.

 

Can anyone help me out with this problem? Thanks.

Link to comment
Share on other sites

C/P from another thread:

 

1. Boot off OSX dvd disc in single user mode (press F8 and type -s)

2. At single user prompt

fdisk -e /dev/rdisk0 ≤- where rdiskX is disk where osx is installed

flag 1

update

write

quit

 

or you could boot leo using dvd and fix it in the same way from terminal

Link to comment
Share on other sites

 Share

×
×
  • Create New...